git/git.c, branch v2.14.3

git.c: ignore pager.* when launching builtin as dashed external

2017-08-03T18:08:11Z

When running, e.g., `git -c alias.bar=foo bar`, we expand the alias and execute `git-foo` as a dashed external. This is true even if git foo is a builtin. That is on purpose, and is motivated in a comment which was added in commit 441981bc ("git: simplify environment save/restore logic", 2016-01-26). Shortly before we launch a dashed external, and unless we have already found out whether we should use a pager, we check `pager.foo`. This was added in commit 92058e4d ("support pager.* for external commands", 2011-08-18). If the dashed external is a builtin, this does not match that commit's intention and is arguably wrong, since it would be cleaner if we let the "dashed external builtin" handle `pager.foo`. This has not mattered in practice, but a recent patch taught `git-tag` to ignore `pager.tag` under certain circumstances. But, when started using an alias, it doesn't get the chance to do so, as outlined above. That recent patch added a test to document this breakage. Do not check `pager.foo` before launching a builtin as a dashed external, i.e., if we recognize the name of the external as a builtin. Change the test to use `test_expect_success`. Signed-off-by: Martin Ågren Signed-off-by: Junio C Hamano

tag: respect `pager.tag` in list-mode only

2017-08-03T18:08:10Z

Using, e.g., `git -c pager.tag tag -a new-tag` results in errors such as "Vim: Warning: Output is not to a terminal" and a garbled terminal. Someone who makes use of both `git tag -a` and `git tag -l` will probably not set `pager.tag`, so that `git tag -a` will actually work, at the cost of not paging output of `git tag -l`. Use the mechanisms introduced in two earlier patches to ignore `pager.tag` in git.c and let the `git tag` builtin handle it on its own. Only respect `pager.tag` when running in list-mode. There is a window between where the pager is started before and after this patch. This means that early errors can behave slightly different before and after this patch. Since operation-parsing has to happen inside this window, this can be seen with `git -c pager.tag="echo pager is used" tag -l --unknown-option`. This change in paging-behavior should be acceptable since it only affects erroneous usages. Update the documentation and update tests. If an alias is used to run `git tag -a`, then `pager.tag` will still be respected. Document this known breakage. It will be fixed in a later commit. Add a similar test for `-l`, which works. Noticed-by: Anatoly Borodin Suggested-by: Jeff King Signed-off-by: Martin Ågren Signed-off-by: Junio C Hamano

git.c: provide setup_auto_pager()

2017-08-03T18:08:10Z

The previous patch introduced a way for builtins to declare that they will take responsibility for handling the `pager.foo`-config item. (See the commit message of that patch for why that could be useful.) Provide setup_auto_pager(), which builtins can call in order to handle `pager.`, including possibly starting the pager. Make this function don't do anything if a pager has already been started, as indicated by use_pager or pager_in_use(). Whenever this function is called from a builtin, git.c will already have called commit_pager_choice(). Since commit_pager_choice() treats the special value -1 as "punt" or "not yet decided", it is not a problem that we might end up calling commit_pager_choice() once in git.c and once (or more) in the builtin. Make the new function use -1 in the same way and document it as "punt". Don't add any users of setup_auto_pager just yet, one will follow in a later patch. Suggested-by: Jeff King Signed-off-by: Martin Ågren Signed-off-by: Junio C Hamano

git.c: let builtins opt for handling `pager.foo` themselves

2017-08-03T18:08:10Z

Before launching a builtin git foo and unless mechanisms with precedence are in use, we check for and handle the `pager.foo` config. This is done without considering exactly how git foo is being used, and indeed, git.c cannot (and should not) know what the arguments to git foo are supposed to achieve. In practice this means that, e.g., `git -c pager.tag tag -a new-tag` results in errors such as "Vim: Warning: Output is not to a terminal" and a garbled terminal. Someone who makes use of both `git tag -a` and `git tag -l` will probably not set `pager.tag`, so that `git tag -a` will actually work, at the cost of not paging output of `git tag -l`. To allow individual builtins to make more informed decisions about when to respect `pager.foo`, introduce a flag DELAY_PAGER_CONFIG. If the flag is set, do not check `pager.foo`. Do not check for DELAY_PAGER_CONFIG in `execv_dashed_external()`. That call site is arguably wrong, although in a way that is not yet visible, and will be changed in a slightly different direction in a later patch. Don't add any users of DELAY_PAGER_CONFIG just yet, one will follow in a later patch. Suggested-by: Jeff King Signed-off-by: Martin Ågren Signed-off-by: Junio C Hamano

ls-files: use repository object

2017-06-24T01:24:34Z

Convert ls-files to use a repository struct and recurse submodules inprocess. Signed-off-by: Brandon Williams Signed-off-by: Junio C Hamano

Merge branches 'bw/ls-files-sans-the-index' and 'bw/config-h' into bw/repo-object

2017-06-24T01:24:00Z

* bw/ls-files-sans-the-index: ls-files: factor out tag calculation ls-files: factor out debug info into a function ls-files: convert show_files to take an index ls-files: convert show_ce_entry to take an index ls-files: convert prune_cache to take an index ls-files: convert ce_excluded to take an index ls-files: convert show_ru_info to take an index ls-files: convert show_other_files to take an index ls-files: convert show_killed_files to take an index ls-files: convert write_eolinfo to take an index ls-files: convert overlay_tree_on_cache to take an index tree: convert read_tree to take an index parameter convert: convert renormalize_buffer to take an index convert: convert convert_to_git to take an index convert: convert convert_to_git_filter_fd to take an index convert: convert crlf_to_git to take an index convert: convert get_cached_convert_stats_ascii to take an index * bw/config-h: config: don't implicitly use gitdir or commondir config: respect commondir setup: teach discover_git_directory to respect the commondir config: don't include config.h by default config: remove git_config_iter config: create config.h alias: use the early config machinery to expand aliases t7006: demonstrate a problem with aliases in subdirectories t1308: relax the test verifying that empty alias values are disallowed help: use early config when autocorrecting aliases config: report correct line number upon error discover_git_directory(): avoid setting invalid git_dir

config: don't include config.h by default

2017-06-15T19:56:22Z

Stop including config.h by default in cache.h. Instead only include config.h in those files which require use of the config system. Signed-off-by: Brandon Williams Signed-off-by: Junio C Hamano

alias: use the early config machinery to expand aliases

2017-06-15T19:31:50Z

Instead of discovering the .git/ directory, reading the config and then trying to painstakingly reset all the global state if we did not find a matching alias, let's use the early config machinery instead. It may look like unnecessary work to discover the .git/ directory in the early config machinery and then call setup_git_directory_gently() in the case of a shell alias, repeating the very same discovery *again*. However, we have to do this as the early config machinery takes pains *not* to touch any global state, while shell aliases expect a possibly changed working directory and at least the GIT_PREFIX and GIT_DIR variables to be set. This change also fixes a known issue where Git tried to read the pager config from an incorrect path in a subdirectory of a Git worktree if an alias expanded to a shell command. Signed-off-by: Johannes Schindelin Reviewed-by: Jeff King Signed-off-by: Junio C Hamano

git: add hidden --list-builtins option

2017-06-05T02:43:33Z

It can be useful in the test suite to be able to iterate over the list of builtins. We could do this with some Makefile magic. But since the authoritative list is in the commands array inside git.c, and since this could also be handy for debugging, let's add a hidden command-line option to dump that list. Signed-off-by: Jeff King Signed-off-by: Junio C Hamano

Merge branch 'bw/recurse-submodules-relative-fix'

2017-03-30T21:07:15Z

A few commands that recently learned the "--recurse-submodule" option misbehaved when started from a subdirectory of the superproject. * bw/recurse-submodules-relative-fix: ls-files: fix bug when recursing with relative pathspec ls-files: fix typo in variable name grep: fix bug when recursing with relative pathspec setup: allow for prefix to be passed to git commands grep: fix help text typo