diff options
Diffstat (limited to 'ci')
| -rwxr-xr-x | ci/check-directional-formatting.bash | 2 | ||||
| -rwxr-xr-x | ci/check-whitespace.sh | 101 | ||||
| -rwxr-xr-x | ci/install-dependencies.sh | 124 | ||||
| -rwxr-xr-x | ci/install-docker-dependencies.sh | 22 | ||||
| -rwxr-xr-x | ci/install-sdk.ps1 | 12 | ||||
| -rwxr-xr-x | ci/lib.sh | 237 | ||||
| -rwxr-xr-x | ci/print-test-failures.sh | 8 | ||||
| -rwxr-xr-x | ci/run-build-and-minimal-fuzzers.sh | 20 | ||||
| -rwxr-xr-x | ci/run-build-and-tests.sh | 5 | ||||
| -rwxr-xr-x | ci/run-docker-build.sh | 66 | ||||
| -rwxr-xr-x | ci/run-docker.sh | 47 | ||||
| -rwxr-xr-x | ci/run-style-check.sh | 25 | ||||
| -rwxr-xr-x | ci/run-test-slice.sh | 5 | ||||
| -rwxr-xr-x | ci/test-documentation.sh | 1 |
14 files changed, 439 insertions, 236 deletions
diff --git a/ci/check-directional-formatting.bash b/ci/check-directional-formatting.bash index e6211b141a..3cbbb7030e 100755 --- a/ci/check-directional-formatting.bash +++ b/ci/check-directional-formatting.bash @@ -1,4 +1,4 @@ -#!/bin/bash +#!/usr/bin/env bash # This script verifies that the non-binary files tracked in the Git index do # not contain any Unicode directional formatting: such formatting could be used diff --git a/ci/check-whitespace.sh b/ci/check-whitespace.sh new file mode 100755 index 0000000000..c40804394c --- /dev/null +++ b/ci/check-whitespace.sh @@ -0,0 +1,101 @@ +#!/usr/bin/env bash +# +# Check that commits after a specified point do not contain new or modified +# lines with whitespace errors. An optional formatted summary can be generated +# by providing an output file path and url as additional arguments. +# + +baseCommit=$1 +outputFile=$2 +url=$3 + +if test "$#" -ne 1 && test "$#" -ne 3 || test -z "$1" +then + echo "USAGE: $0 <BASE_COMMIT> [<OUTPUT_FILE> <URL>]" + exit 1 +fi + +problems=() +commit= +commitText= +commitTextmd= +goodParent= + +if ! git rev-parse --quiet --verify "${baseCommit}" +then + echo "Invalid <BASE_COMMIT> '${baseCommit}'" + exit 1 +fi + +while read dash sha etc +do + case "${dash}" in + "---") # Line contains commit information. + if test -z "${goodParent}" + then + # Assume the commit has no whitespace errors until detected otherwise. + goodParent=${sha} + fi + + commit="${sha}" + commitText="${sha} ${etc}" + commitTextmd="[${sha}](${url}/commit/${sha}) ${etc}" + ;; + "") + ;; + *) # Line contains whitespace error information for current commit. + if test -n "${goodParent}" + then + problems+=("1) --- ${commitTextmd}") + echo "" + echo "--- ${commitText}" + goodParent= + fi + + case "${dash}" in + *:[1-9]*:) # contains file and line number information + dashend=${dash#*:} + problems+=("[${dash}](${url}/blob/${commit}/${dash%%:*}#L${dashend%:}) ${sha} ${etc}") + ;; + *) + problems+=("\`${dash} ${sha} ${etc}\`") + ;; + esac + echo "${dash} ${sha} ${etc}" + ;; + esac +done <<< "$(git log --check --pretty=format:"---% h% s" "${baseCommit}"..)" + +if test ${#problems[*]} -gt 0 +then + if test -z "${goodParent}" + then + goodParent=${baseCommit: 0:7} + fi + + echo "A whitespace issue was found in one or more of the commits." + echo "Run the following command to resolve whitespace issues:" + echo "git rebase --whitespace=fix ${goodParent}" + + # If target output file is provided, write formatted output. + if test -n "$outputFile" + then + echo "🛑 Please review the Summary output for further information." + ( + echo "### :x: A whitespace issue was found in one or more of the commits." + echo "" + echo "Run these commands to correct the problem:" + echo "1. \`git rebase --whitespace=fix ${goodParent}\`" + echo "1. \`git push --force\`" + echo "" + echo "Errors:" + + for i in "${problems[@]}" + do + echo "${i}" + done + ) >"$outputFile" + fi + + exit 2 +fi diff --git a/ci/install-dependencies.sh b/ci/install-dependencies.sh index 33039d516b..126e570eb4 100755 --- a/ci/install-dependencies.sh +++ b/ci/install-dependencies.sh @@ -1,49 +1,93 @@ -#!/usr/bin/env bash +#!/bin/sh # # Install dependencies required to build and test Git on Linux and macOS # . ${0%/*}/lib.sh -P4WHENCE=https://cdist2.perforce.com/perforce/r21.2 +begin_group "Install dependencies" + +P4WHENCE=https://cdist2.perforce.com/perforce/r23.2 LFSWHENCE=https://github.com/github/git-lfs/releases/download/v$LINUX_GIT_LFS_VERSION -UBUNTU_COMMON_PKGS="make libssl-dev libcurl4-openssl-dev libexpat-dev - tcl tk gettext zlib1g-dev perl-modules liberror-perl libauthen-sasl-perl - libemail-valid-perl libio-socket-ssl-perl libnet-smtp-ssl-perl" +JGITWHENCE=https://repo.eclipse.org/content/groups/releases//org/eclipse/jgit/org.eclipse.jgit.pgm/6.8.0.202311291450-r/org.eclipse.jgit.pgm-6.8.0.202311291450-r.sh + +# Make sudo a no-op and execute the command directly when running as root. +# While using sudo would be fine on most platforms when we are root already, +# some platforms like e.g. Alpine Linux do not have sudo available by default +# and would thus break. +if test "$(id -u)" -eq 0 +then + sudo () { + "$@" + } +fi + +case "$distro" in +alpine-*) + apk add --update shadow sudo build-base curl-dev openssl-dev expat-dev gettext \ + pcre2-dev python3 musl-libintl perl-utils ncurses \ + apache2 apache2-http2 apache2-proxy apache2-ssl apache2-webdav apr-util-dbd_sqlite3 \ + bash cvs gnupg perl-cgi perl-dbd-sqlite perl-io-tty >/dev/null + ;; +fedora-*) + dnf -yq update >/dev/null && + dnf -yq install make gcc findutils diffutils perl python3 gettext zlib-devel expat-devel openssl-devel curl-devel pcre2-devel >/dev/null + ;; +ubuntu-*|ubuntu32-*) + # Required so that apt doesn't wait for user input on certain packages. + export DEBIAN_FRONTEND=noninteractive + + case "$distro" in + ubuntu-*) + SVN='libsvn-perl subversion' + ;; + *) + SVN= + ;; + esac -case "$runs_on_pool" in -ubuntu-*) sudo apt-get -q update - sudo apt-get -q -y install language-pack-is libsvn-perl apache2 \ - $UBUNTU_COMMON_PKGS $CC_PACKAGE $PYTHON_PACKAGE - mkdir --parents "$P4_PATH" - pushd "$P4_PATH" - wget --quiet "$P4WHENCE/bin.linux26x86_64/p4d" - wget --quiet "$P4WHENCE/bin.linux26x86_64/p4" - chmod u+x p4d - chmod u+x p4 - popd - mkdir --parents "$GIT_LFS_PATH" - pushd "$GIT_LFS_PATH" + sudo apt-get -q -y install \ + language-pack-is apache2 cvs cvsps git gnupg $SVN \ + make libssl-dev libcurl4-openssl-dev libexpat-dev wget sudo default-jre \ + tcl tk gettext zlib1g-dev perl-modules liberror-perl libauthen-sasl-perl \ + libemail-valid-perl libio-pty-perl libio-socket-ssl-perl libnet-smtp-ssl-perl libdbd-sqlite3-perl libcgi-pm-perl \ + ${CC_PACKAGE:-${CC:-gcc}} $PYTHON_PACKAGE + + case "$distro" in + ubuntu-16.04) + # Does not support JGit, but we also don't really care about + # the others. We rather care whether Git still compiles and + # runs fine overall. + ;; + ubuntu-*) + mkdir --parents "$CUSTOM_PATH" + + wget --quiet --directory-prefix="$CUSTOM_PATH" \ + "$P4WHENCE/bin.linux26x86_64/p4d" "$P4WHENCE/bin.linux26x86_64/p4" + chmod a+x "$CUSTOM_PATH/p4d" "$CUSTOM_PATH/p4" + wget --quiet "$LFSWHENCE/git-lfs-linux-amd64-$LINUX_GIT_LFS_VERSION.tar.gz" - tar --extract --gunzip --file "git-lfs-linux-amd64-$LINUX_GIT_LFS_VERSION.tar.gz" - cp git-lfs-$LINUX_GIT_LFS_VERSION/git-lfs . - popd + tar -xzf "git-lfs-linux-amd64-$LINUX_GIT_LFS_VERSION.tar.gz" \ + -C "$CUSTOM_PATH" --strip-components=1 "git-lfs-$LINUX_GIT_LFS_VERSION/git-lfs" + rm "git-lfs-linux-amd64-$LINUX_GIT_LFS_VERSION.tar.gz" + + wget --quiet "$JGITWHENCE" --output-document="$CUSTOM_PATH/jgit" + chmod a+x "$CUSTOM_PATH/jgit" + ;; + esac ;; macos-*) export HOMEBREW_NO_AUTO_UPDATE=1 HOMEBREW_NO_INSTALL_CLEANUP=1 # Uncomment this if you want to run perf tests: # brew install gnu-time brew link --force gettext - mkdir -p $HOME/bin - ( - cd $HOME/bin - wget -q "$P4WHENCE/bin.macosx1015x86_64/helix-core-server.tgz" && - tar -xf helix-core-server.tgz && - sudo xattr -d com.apple.quarantine p4 p4d 2>/dev/null || true - ) - PATH="$PATH:${HOME}/bin" - export PATH + + mkdir -p "$CUSTOM_PATH" + wget -q "$P4WHENCE/bin.macosx1015x86_64/helix-core-server.tgz" && + tar -xf helix-core-server.tgz -C "$CUSTOM_PATH" p4 p4d && + sudo xattr -d com.apple.quarantine "$CUSTOM_PATH/p4" "$CUSTOM_PATH/p4d" 2>/dev/null || true + rm helix-core-server.tgz if test -n "$CC_PACKAGE" then @@ -55,6 +99,10 @@ macos-*) esac case "$jobname" in +ClangFormat) + sudo apt-get -q update + sudo apt-get -q -y install clang-format + ;; StaticAnalysis) sudo apt-get -q update sudo apt-get -q -y install coccinelle libcurl4-openssl-dev libssl-dev \ @@ -71,10 +119,7 @@ Documentation) test -n "$ALREADY_HAVE_ASCIIDOCTOR" || sudo gem install --version 1.5.8 asciidoctor - ;; -linux-gcc-default) - sudo apt-get -q update - sudo apt-get -q -y install $UBUNTU_COMMON_PKGS + sudo gem install concurrent-ruby ;; esac @@ -87,6 +132,7 @@ then else echo >&2 "WARNING: perforce wasn't installed, see above for clues why" fi + if type git-lfs >/dev/null 2>&1 then echo "$(tput setaf 6)Git-LFS Version$(tput sgr0)" @@ -94,3 +140,13 @@ then else echo >&2 "WARNING: git-lfs wasn't installed, see above for clues why" fi + +if type jgit >/dev/null 2>&1 +then + echo "$(tput setaf 6)JGit Version$(tput sgr0)" + jgit version +else + echo >&2 "WARNING: JGit wasn't installed, see above for clues why" +fi + +end_group "Install dependencies" diff --git a/ci/install-docker-dependencies.sh b/ci/install-docker-dependencies.sh deleted file mode 100755 index 78b7e326da..0000000000 --- a/ci/install-docker-dependencies.sh +++ /dev/null @@ -1,22 +0,0 @@ -#!/bin/sh -# -# Install dependencies required to build and test Git inside container -# - -case "$jobname" in -linux32) - linux32 --32bit i386 sh -c ' - apt update >/dev/null && - apt install -y build-essential libcurl4-openssl-dev \ - libssl-dev libexpat-dev gettext python >/dev/null - ' - ;; -linux-musl) - apk add --update build-base curl-dev openssl-dev expat-dev gettext \ - pcre2-dev python3 musl-libintl perl-utils ncurses >/dev/null - ;; -pedantic) - dnf -yq update >/dev/null && - dnf -yq install make gcc findutils diffutils perl python3 gettext zlib-devel expat-devel openssl-devel curl-devel pcre2-devel >/dev/null - ;; -esac diff --git a/ci/install-sdk.ps1 b/ci/install-sdk.ps1 new file mode 100755 index 0000000000..66f24838a4 --- /dev/null +++ b/ci/install-sdk.ps1 @@ -0,0 +1,12 @@ +param( + [string]$directory='git-sdk', + [string]$url='https://github.com/git-for-windows/git-sdk-64/releases/download/ci-artifacts/git-sdk-x86_64-minimal.zip' +) + +Invoke-WebRequest "$url" -OutFile git-sdk.zip +Expand-Archive -LiteralPath git-sdk.zip -DestinationPath "$directory" +Remove-Item -Path git-sdk.zip + +New-Item -Path .git/info -ItemType Directory -Force +New-Item -Path .git/info/exclude -ItemType File -Force +Add-Content -Path .git/info/exclude -Value "/$directory" @@ -1,16 +1,7 @@ # Library of functions shared by all CI scripts -if test true != "$GITHUB_ACTIONS" +if test true = "$GITHUB_ACTIONS" then - begin_group () { :; } - end_group () { :; } - - group () { - shift - "$@" - } - set -x -else begin_group () { need_to_end_group=t echo "::group::$1" >&2 @@ -23,32 +14,55 @@ else need_to_end_group= echo '::endgroup::' >&2 } - trap end_group EXIT +elif test true = "$GITLAB_CI" +then + begin_group () { + need_to_end_group=t + printf "\e[0Ksection_start:$(date +%s):$(echo "$1" | tr ' ' _)[collapsed=true]\r\e[0K$1\n" + trap "end_group '$1'" EXIT + set -x + } - group () { + end_group () { + test -n "$need_to_end_group" || return 0 set +x - begin_group "$1" - shift - # work around `dash` not supporting `set -o pipefail` - ( - "$@" 2>&1 - echo $? >exit.status - ) | - sed 's/^\(\([^ ]*\):\([0-9]*\):\([0-9]*:\) \)\(error\|warning\): /::\5 file=\2,line=\3::\1/' - res=$(cat exit.status) - rm exit.status - end_group - return $res + need_to_end_group= + printf "\e[0Ksection_end:$(date +%s):$(echo "$1" | tr ' ' _)\r\e[0K\n" + trap - EXIT } +else + begin_group () { :; } + end_group () { :; } - begin_group "CI setup" + set -x fi +group () { + group="$1" + shift + begin_group "$group" + + # work around `dash` not supporting `set -o pipefail` + ( + "$@" 2>&1 + echo $? >exit.status + ) | + sed 's/^\(\([^ ]*\):\([0-9]*\):\([0-9]*:\) \)\(error\|warning\): /::\5 file=\2,line=\3::\1/' + res=$(cat exit.status) + rm exit.status + + end_group "$group" + return $res +} + +begin_group "CI setup" +trap "end_group 'CI setup'" EXIT + # Set 'exit on error' for all CI scripts to let the caller know that # something went wrong. # # We already enabled tracing executed commands earlier. This helps by showing -# how # environment variables are set and and dependencies are installed. +# how # environment variables are set and dependencies are installed. set -e skip_branch_tip_with_tag () { @@ -71,10 +85,32 @@ skip_branch_tip_with_tag () { fi } +# Check whether we can use the path passed via the first argument as Git +# repository. +is_usable_git_repository () { + # We require Git in our PATH, otherwise we cannot access repositories + # at all. + if ! command -v git >/dev/null + then + return 1 + fi + + # And the target directory needs to be a proper Git repository. + if ! git -C "$1" rev-parse 2>/dev/null + then + return 1 + fi +} + # Save some info about the current commit's tree, so we can skip the build # job if we encounter the same tree again and can provide a useful info # message. save_good_tree () { + if ! is_usable_git_repository . + then + return + fi + echo "$(git rev-parse $CI_COMMIT^{tree}) $CI_COMMIT $CI_JOB_NUMBER $CI_JOB_ID" >>"$good_trees_file" # limit the file size tail -1000 "$good_trees_file" >"$good_trees_file".tmp @@ -90,6 +126,11 @@ skip_good_tree () { return fi + if ! is_usable_git_repository . + then + return + fi + if ! good_tree_info="$(grep "^$(git rev-parse $CI_COMMIT^{tree}) " "$good_trees_file")" then # Haven't seen this tree yet, or no cached good trees file yet. @@ -121,6 +162,11 @@ skip_good_tree () { } check_unignored_build_artifacts () { + if ! is_usable_git_repository . + then + return + fi + ! git ls-files --other --exclude-standard --error-unmatch \ -- ':/*' 2>/dev/null || { @@ -133,6 +179,26 @@ handle_failed_tests () { return 1 } +create_failed_test_artifacts () { + mkdir -p t/failed-test-artifacts + + for test_exit in t/test-results/*.exit + do + test 0 != "$(cat "$test_exit")" || continue + + test_name="${test_exit%.exit}" + test_name="${test_name##*/}" + printf "\\e[33m\\e[1m=== Failed test: ${test_name} ===\\e[m\\n" + echo "The full logs are in the 'print test failures' step below." + echo "See also the 'failed-tests-*' artifacts attached to this run." + cat "t/test-results/$test_name.markup" + + trash_dir="t/trash directory.$test_name" + cp "t/test-results/$test_name.out" t/failed-test-artifacts/ + tar czf t/failed-test-artifacts/"$test_name".trash.tar.gz "$trash_dir" + done +} + # GitHub Action doesn't set TERM, which is required by tput export TERM=${TERM:-dumb} @@ -156,11 +222,8 @@ then # among *all* phases) cache_dir="$HOME/test-cache/$SYSTEM_PHASENAME" - export GIT_PROVE_OPTS="--timer --jobs 10 --state=failed,slow,save" - export GIT_TEST_OPTS="--verbose-log -x --write-junit-xml" - MAKEFLAGS="$MAKEFLAGS --jobs=10" - test windows_nt != "$CI_OS_NAME" || - GIT_TEST_OPTS="--no-chain-lint --no-bin-wrappers $GIT_TEST_OPTS" + GIT_TEST_OPTS="--write-junit-xml" + JOBS=10 elif test true = "$GITHUB_ACTIONS" then CI_TYPE=github-actions @@ -173,40 +236,78 @@ then CC="${CC_PACKAGE:-${CC:-gcc}}" DONT_SKIP_TAGS=t handle_failed_tests () { - mkdir -p t/failed-test-artifacts echo "FAILED_TEST_ARTIFACTS=t/failed-test-artifacts" >>$GITHUB_ENV + create_failed_test_artifacts + return 1 + } + + cache_dir="$HOME/none" + + GIT_TEST_OPTS="--github-workflow-markup" + JOBS=10 +elif test true = "$GITLAB_CI" +then + CI_TYPE=gitlab-ci + CI_BRANCH="$CI_COMMIT_REF_NAME" + CI_COMMIT="$CI_COMMIT_SHA" + + case "$OS,$CI_JOB_IMAGE" in + Windows_NT,*) + CI_OS_NAME=windows + JOBS=$NUMBER_OF_PROCESSORS + ;; + *,macos-*) + # GitLab CI has Python installed via multiple package managers, + # most notably via asdf and Homebrew. Ensure that our builds + # pick up the Homebrew one by prepending it to our PATH as the + # asdf one breaks tests. + export PATH="$(brew --prefix)/bin:$PATH" + + CI_OS_NAME=osx + JOBS=$(nproc) + ;; + *,alpine:*|*,fedora:*|*,ubuntu:*) + CI_OS_NAME=linux + JOBS=$(nproc) + ;; + *) + echo "Could not identify OS image" >&2 + env >&2 + exit 1 + ;; + esac + CI_REPO_SLUG="$CI_PROJECT_PATH" + CI_JOB_ID="$CI_JOB_ID" + CC="${CC_PACKAGE:-${CC:-gcc}}" + DONT_SKIP_TAGS=t - for test_exit in t/test-results/*.exit - do - test 0 != "$(cat "$test_exit")" || continue - - test_name="${test_exit%.exit}" - test_name="${test_name##*/}" - printf "\\e[33m\\e[1m=== Failed test: ${test_name} ===\\e[m\\n" - echo "The full logs are in the 'print test failures' step below." - echo "See also the 'failed-tests-*' artifacts attached to this run." - cat "t/test-results/$test_name.markup" - - trash_dir="t/trash directory.$test_name" - cp "t/test-results/$test_name.out" t/failed-test-artifacts/ - tar czf t/failed-test-artifacts/"$test_name".trash.tar.gz "$trash_dir" - done + handle_failed_tests () { + create_failed_test_artifacts return 1 } cache_dir="$HOME/none" - export GIT_PROVE_OPTS="--timer --jobs 10" - export GIT_TEST_OPTS="--verbose-log -x --github-workflow-markup" - MAKEFLAGS="$MAKEFLAGS --jobs=10" - test windows != "$CI_OS_NAME" || - GIT_TEST_OPTS="--no-chain-lint --no-bin-wrappers $GIT_TEST_OPTS" + distro=$(echo "$CI_JOB_IMAGE" | tr : -) else echo "Could not identify CI type" >&2 env >&2 exit 1 fi +MAKEFLAGS="$MAKEFLAGS --jobs=$JOBS" +GIT_PROVE_OPTS="--timer --jobs $JOBS" + +GIT_TEST_OPTS="$GIT_TEST_OPTS --verbose-log -x" +case "$CI_OS_NAME" in +windows|windows_nt) + GIT_TEST_OPTS="$GIT_TEST_OPTS --no-chain-lint --no-bin-wrappers" + ;; +esac + +export GIT_TEST_OPTS +export GIT_PROVE_OPTS + good_trees_file="$cache_dir/good-trees" mkdir -p "$cache_dir" @@ -225,21 +326,32 @@ export DEFAULT_TEST_TARGET=prove export GIT_TEST_CLONE_2GB=true export SKIP_DASHED_BUILT_INS=YesPlease -case "$runs_on_pool" in +case "$distro" in ubuntu-*) if test "$jobname" = "linux-gcc-default" then break fi - PYTHON_PACKAGE=python2 - if test "$jobname" = linux-gcc + # Python 2 is end of life, and Ubuntu 23.04 and newer don't actually + # have it anymore. We thus only test with Python 2 on older LTS + # releases. + if test "$distro" = "ubuntu-20.04" then + PYTHON_PACKAGE=python2 + else PYTHON_PACKAGE=python3 fi MAKEFLAGS="$MAKEFLAGS PYTHON_PATH=/usr/bin/$PYTHON_PACKAGE" - export GIT_TEST_HTTPD=true + case "$distro" in + ubuntu-16.04) + # Apache is too old for HTTP/2. + ;; + *) + export GIT_TEST_HTTPD=true + ;; + esac # The Linux build installs the defined dependency versions below. # The OS X build installs much more recent versions, whichever @@ -247,10 +359,6 @@ ubuntu-*) # image. # Keep that in mind when you encounter a broken OS X build! export LINUX_GIT_LFS_VERSION="1.5.2" - - P4_PATH="$HOME/custom/p4" - GIT_LFS_PATH="$HOME/custom/git-lfs" - export PATH="$GIT_LFS_PATH:$P4_PATH:$PATH" ;; macos-*) MAKEFLAGS="$MAKEFLAGS PYTHON_PATH=$(which python3)" @@ -261,6 +369,9 @@ macos-*) ;; esac +CUSTOM_PATH="${CUSTOM_PATH:-$HOME/path}" +export PATH="$CUSTOM_PATH:$PATH" + case "$jobname" in linux32) CC=gcc @@ -271,10 +382,8 @@ linux-musl) MAKEFLAGS="$MAKEFLAGS NO_REGEX=Yes ICONV_OMITS_BOM=Yes" MAKEFLAGS="$MAKEFLAGS GIT_TEST_UTF8_LOCALE=C.UTF-8" ;; -linux-leaks) +linux-leaks|linux-reftable-leaks) export SANITIZE=leak - export GIT_TEST_PASSING_SANITIZE_LEAK=true - export GIT_TEST_SANITIZE_LEAK_LOG=true ;; linux-asan-ubsan) export SANITIZE=address,undefined @@ -285,5 +394,5 @@ esac MAKEFLAGS="$MAKEFLAGS CC=${CC:-cc}" -end_group +end_group "CI setup" set -x diff --git a/ci/print-test-failures.sh b/ci/print-test-failures.sh index 57277eefcd..b1f80aeac3 100755 --- a/ci/print-test-failures.sh +++ b/ci/print-test-failures.sh @@ -8,7 +8,7 @@ # Tracing executed commands would produce too much noise in the loop below. set +x -cd t/ +cd "${TEST_OUTPUT_DIRECTORY:-t/}" if ! ls test-results/*.exit >/dev/null 2>/dev/null then @@ -51,6 +51,12 @@ do tar czf failed-test-artifacts/"$test_name".trash.tar.gz "$trash_dir" continue ;; + gitlab-ci) + mkdir -p failed-test-artifacts + cp "${TEST_EXIT%.exit}.out" failed-test-artifacts/ + tar czf failed-test-artifacts/"$test_name".trash.tar.gz "$trash_dir" + continue + ;; *) echo "Unhandled CI type: $CI_TYPE" >&2 exit 1 diff --git a/ci/run-build-and-minimal-fuzzers.sh b/ci/run-build-and-minimal-fuzzers.sh new file mode 100755 index 0000000000..af8065f349 --- /dev/null +++ b/ci/run-build-and-minimal-fuzzers.sh @@ -0,0 +1,20 @@ +#!/bin/sh +# +# Build and test Git's fuzzers +# + +. ${0%/*}/lib.sh + +group "Build fuzzers" make \ + NO_CURL=NoThanks \ + CC=clang \ + FUZZ_CXX=clang++ \ + CFLAGS="-fsanitize=fuzzer-no-link,address" \ + LIB_FUZZING_ENGINE="-fsanitize=fuzzer,address" \ + fuzz-all + +for fuzzer in commit-graph config date pack-headers pack-idx ; do + begin_group "fuzz-$fuzzer" + ./oss-fuzz/fuzz-$fuzzer -verbosity=0 -runs=1 || exit 1 + end_group "fuzz-$fuzzer" +done diff --git a/ci/run-build-and-tests.sh b/ci/run-build-and-tests.sh index 2528f25e31..2e28d02b20 100755 --- a/ci/run-build-and-tests.sh +++ b/ci/run-build-and-tests.sh @@ -25,7 +25,7 @@ linux-TEST-vars) export GIT_TEST_COMMIT_GRAPH=1 export GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS=1 export GIT_TEST_MULTI_PACK_INDEX=1 - export GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP=1 + export GIT_TEST_MULTI_PACK_INDEX_WRITE_INCREMENTAL=1 export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master export GIT_TEST_NO_WRITE_REV_INDEX=1 export GIT_TEST_CHECKOUT_WORKERS=2 @@ -37,6 +37,9 @@ linux-clang) linux-sha256) export GIT_TEST_DEFAULT_HASH=sha256 ;; +linux-reftable|linux-reftable-leaks|osx-reftable) + export GIT_TEST_DEFAULT_REF_FORMAT=reftable + ;; pedantic) # Don't run the tests; we only care about whether Git can be # built. diff --git a/ci/run-docker-build.sh b/ci/run-docker-build.sh deleted file mode 100755 index 6cd832efb9..0000000000 --- a/ci/run-docker-build.sh +++ /dev/null @@ -1,66 +0,0 @@ -#!/bin/sh -# -# Build and test Git inside container -# -# Usage: -# run-docker-build.sh <host-user-id> -# - -set -ex - -if test $# -ne 1 || test -z "$1" -then - echo >&2 "usage: run-docker-build.sh <host-user-id>" - exit 1 -fi - -case "$jobname" in -linux32) - switch_cmd="linux32 --32bit i386" - ;; -linux-musl) - switch_cmd= - useradd () { adduser -D "$@"; } - ;; -*) - exit 1 - ;; -esac - -"${0%/*}/install-docker-dependencies.sh" - -# If this script runs inside a docker container, then all commands are -# usually executed as root. Consequently, the host user might not be -# able to access the test output files. -# If a non 0 host user id is given, then create a user "ci" with that -# user id to make everything accessible to the host user. -HOST_UID=$1 -if test $HOST_UID -eq 0 -then - # Just in case someone does want to run the test suite as root. - CI_USER=root -else - CI_USER=ci - if test "$(id -u $CI_USER 2>/dev/null)" = $HOST_UID - then - echo "user '$CI_USER' already exists with the requested ID $HOST_UID" - else - useradd -u $HOST_UID $CI_USER - fi -fi - -# Build and test -command $switch_cmd su -m -l $CI_USER -c " - set -ex - export DEVELOPER='$DEVELOPER' - export DEFAULT_TEST_TARGET='$DEFAULT_TEST_TARGET' - export GIT_PROVE_OPTS='$GIT_PROVE_OPTS' - export GIT_TEST_OPTS='$GIT_TEST_OPTS' - export GIT_TEST_CLONE_2GB='$GIT_TEST_CLONE_2GB' - export MAKEFLAGS='$MAKEFLAGS' - export cache_dir='$cache_dir' - cd /usr/src/git - test -n '$cache_dir' && ln -s '$cache_dir/.prove' t/.prove - make - make test -" diff --git a/ci/run-docker.sh b/ci/run-docker.sh deleted file mode 100755 index af89d1624a..0000000000 --- a/ci/run-docker.sh +++ /dev/null @@ -1,47 +0,0 @@ -#!/bin/sh -# -# Download and run Docker image to build and test Git -# - -. ${0%/*}/lib.sh - -case "$jobname" in -linux32) - CI_CONTAINER="daald/ubuntu32:xenial" - ;; -linux-musl) - CI_CONTAINER=alpine - ;; -*) - exit 1 - ;; -esac - -docker pull "$CI_CONTAINER" - -# Use the following command to debug the docker build locally: -# <host-user-id> must be 0 if podman is used as drop-in replacement for docker -# $ docker run -itv "${PWD}:/usr/src/git" --entrypoint /bin/sh "$CI_CONTAINER" -# root@container:/# export jobname=<jobname> -# root@container:/# /usr/src/git/ci/run-docker-build.sh <host-user-id> - -container_cache_dir=/tmp/container-cache - -docker run \ - --interactive \ - --env DEVELOPER \ - --env DEFAULT_TEST_TARGET \ - --env GIT_PROVE_OPTS \ - --env GIT_TEST_OPTS \ - --env GIT_TEST_CLONE_2GB \ - --env MAKEFLAGS \ - --env jobname \ - --env cache_dir="$container_cache_dir" \ - --volume "${PWD}:/usr/src/git" \ - --volume "$cache_dir:$container_cache_dir" \ - "$CI_CONTAINER" \ - /usr/src/git/ci/run-docker-build.sh $(id -u $USER) - -check_unignored_build_artifacts - -save_good_tree diff --git a/ci/run-style-check.sh b/ci/run-style-check.sh new file mode 100755 index 0000000000..6cd4b1d934 --- /dev/null +++ b/ci/run-style-check.sh @@ -0,0 +1,25 @@ +#!/bin/sh +# +# Perform style check +# + +baseCommit=$1 + +# Remove optional braces of control statements (if, else, for, and while) +# according to the LLVM coding style. This avoids braces on simple +# single-statement bodies of statements but keeps braces if one side of +# if/else if/.../else cascade has multi-statement body. +# +# As this rule comes with a warning [1], we want to experiment with it +# before adding it in-tree. since the CI job for the style check is allowed +# to fail, appending the rule here allows us to validate its efficacy. +# While also ensuring that end-users are not affected directly. +# +# [1]: https://clang.llvm.org/docs/ClangFormatStyleOptions.html#removebracesllvm +{ + cat .clang-format + echo "RemoveBracesLLVM: true" +} >/tmp/clang-format-rules + +git clang-format --style=file:/tmp/clang-format-rules \ + --diff --extensions c,h "$baseCommit" diff --git a/ci/run-test-slice.sh b/ci/run-test-slice.sh index a3c67956a8..e167e646f7 100755 --- a/ci/run-test-slice.sh +++ b/ci/run-test-slice.sh @@ -15,4 +15,9 @@ group "Run tests" make --quiet -C t T="$(cd t && tr '\n' ' ')" || handle_failed_tests +# We only have one unit test at the moment, so run it in the first slice +if [ "$1" == "0" ] ; then + group "Run unit tests" make --quiet -C t unit-tests-test-tool +fi + check_unignored_build_artifacts diff --git a/ci/test-documentation.sh b/ci/test-documentation.sh index de41888430..02b3af3941 100755 --- a/ci/test-documentation.sh +++ b/ci/test-documentation.sh @@ -11,6 +11,7 @@ filter_log () { -e '/^ \* new asciidoc flags$/d' \ -e '/stripped namespace before processing/d' \ -e '/Attributed.*IDs for element/d' \ + -e '/SyntaxWarning: invalid escape sequence/d' \ "$1" } |