1 files changed, 22 insertions, 429 deletions

diff --git a/git-bisect.sh b/git-bisect.sh
index 54cbfecc5a..1f3f6e9fc5 100755
--- a/git-bisect.sh
+++ b/git-bisect.sh
@@ -3,8 +3,8 @@
 USAGE='[help|start|bad|good|new|old|terms|skip|next|reset|visualize|view|replay|log|run]'
 LONG_USAGE='git bisect help
 	print this long help message.
-git bisect start [--term-{old,good}=<term> --term-{new,bad}=<term>]
-		 [--no-checkout] [<bad> [<good>...]] [--] [<pathspec>...]
+git bisect start [--term-{new,bad}=<term> --term-{old,good}=<term>]
+		 [--no-checkout] [--first-parent] [<bad> [<good>...]] [--] [<pathspec>...]
 	reset bisect state and start bisection.
 git bisect (bad|new) [<rev>]
 	mark <rev> a known-bad revision/
@@ -39,204 +39,6 @@ _x40="$_x40$_x40$_x40$_x40$_x40$_x40$_x40$_x40"
 TERM_BAD=bad
 TERM_GOOD=good
 
-bisect_head()
-{
-	if test -f "$GIT_DIR/BISECT_HEAD"
-	then
-		echo BISECT_HEAD
-	else
-		echo HEAD
-	fi
-}
-
-bisect_autostart() {
-	test -s "$GIT_DIR/BISECT_START" || {
-		gettextln "You need to start by \"git bisect start\"" >&2
-		if test -t 0
-		then
-			# TRANSLATORS: Make sure to include [Y] and [n] in your
-			# translation. The program will only accept English input
-			# at this point.
-			gettext "Do you want me to do it for you [Y/n]? " >&2
-			read yesno
-			case "$yesno" in
-			[Nn]*)
-				exit ;;
-			esac
-			bisect_start
-		else
-			exit 1
-		fi
-	}
-}
-
-bisect_start() {
-	#
-	# Check for one bad and then some good revisions.
-	#
-	has_double_dash=0
-	for arg; do
-		case "$arg" in --) has_double_dash=1; break ;; esac
-	done
-	orig_args=$(git rev-parse --sq-quote "$@")
-	bad_seen=0
-	eval=''
-	must_write_terms=0
-	revs=''
-	if test "z$(git rev-parse --is-bare-repository)" != zfalse
-	then
-		mode=--no-checkout
-	else
-		mode=''
-	fi
-	while [ $# -gt 0 ]; do
-		arg="$1"
-		case "$arg" in
-		--)
-			shift
-			break
-		;;
-		--no-checkout)
-			mode=--no-checkout
-			shift ;;
-		--term-good|--term-old)
-			shift
-			must_write_terms=1
-			TERM_GOOD=$1
-			shift ;;
-		--term-good=*|--term-old=*)
-			must_write_terms=1
-			TERM_GOOD=${1#*=}
-			shift ;;
-		--term-bad|--term-new)
-			shift
-			must_write_terms=1
-			TERM_BAD=$1
-			shift ;;
-		--term-bad=*|--term-new=*)
-			must_write_terms=1
-			TERM_BAD=${1#*=}
-			shift ;;
-		--*)
-			die "$(eval_gettext "unrecognised option: '\$arg'")" ;;
-		*)
-			rev=$(git rev-parse -q --verify "$arg^{commit}") || {
-				test $has_double_dash -eq 1 &&
-				die "$(eval_gettext "'\$arg' does not appear to be a valid revision")"
-				break
-			}
-			revs="$revs $rev"
-			shift
-			;;
-		esac
-	done
-
-	for rev in $revs
-	do
-		# The user ran "git bisect start <sha1>
-		# <sha1>", hence did not explicitly specify
-		# the terms, but we are already starting to
-		# set references named with the default terms,
-		# and won't be able to change afterwards.
-		must_write_terms=1
-
-		case $bad_seen in
-		0) state=$TERM_BAD ; bad_seen=1 ;;
-		*) state=$TERM_GOOD ;;
-		esac
-		eval="$eval bisect_write '$state' '$rev' 'nolog' &&"
-	done
-	#
-	# Verify HEAD.
-	#
-	head=$(GIT_DIR="$GIT_DIR" git symbolic-ref -q HEAD) ||
-	head=$(GIT_DIR="$GIT_DIR" git rev-parse --verify HEAD) ||
-	die "$(gettext "Bad HEAD - I need a HEAD")"
-
-	#
-	# Check if we are bisecting.
-	#
-	start_head=''
-	if test -s "$GIT_DIR/BISECT_START"
-	then
-		# Reset to the rev from where we started.
-		start_head=$(cat "$GIT_DIR/BISECT_START")
-		if test "z$mode" != "z--no-checkout"
-		then
-			git checkout "$start_head" -- ||
-			die "$(eval_gettext "Checking out '\$start_head' failed. Try 'git bisect reset <valid-branch>'.")"
-		fi
-	else
-		# Get rev from where we start.
-		case "$head" in
-		refs/heads/*|$_x40)
-			# This error message should only be triggered by
-			# cogito usage, and cogito users should understand
-			# it relates to cg-seek.
-			[ -s "$GIT_DIR/head-name" ] &&
-				die "$(gettext "won't bisect on cg-seek'ed tree")"
-			start_head="${head#refs/heads/}"
-			;;
-		*)
-			die "$(gettext "Bad HEAD - strange symbolic ref")"
-			;;
-		esac
-	fi
-
-	#
-	# Get rid of any old bisect state.
-	#
-	git bisect--helper --bisect-clean-state || exit
-
-	#
-	# Change state.
-	# In case of mistaken revs or checkout error, or signals received,
-	# "bisect_auto_next" below may exit or misbehave.
-	# We have to trap this to be able to clean up using
-	# "bisect_clean_state".
-	#
-	trap 'git bisect--helper --bisect-clean-state' 0
-	trap 'exit 255' 1 2 3 15
-
-	#
-	# Write new start state.
-	#
-	echo "$start_head" >"$GIT_DIR/BISECT_START" && {
-		test "z$mode" != "z--no-checkout" ||
-		git update-ref --no-deref BISECT_HEAD "$start_head"
-	} &&
-	git rev-parse --sq-quote "$@" >"$GIT_DIR/BISECT_NAMES" &&
-	eval "$eval true" &&
-	if test $must_write_terms -eq 1
-	then
-		git bisect--helper --write-terms "$TERM_BAD" "$TERM_GOOD" || exit
-	fi &&
-	echo "git bisect start$orig_args" >>"$GIT_DIR/BISECT_LOG" || exit
-	#
-	# Check if we can proceed to the next bisect state.
-	#
-	bisect_auto_next
-
-	trap '-' 0
-}
-
-bisect_write() {
-	state="$1"
-	rev="$2"
-	nolog="$3"
-	case "$state" in
-		"$TERM_BAD")
-			tag="$state" ;;
-		"$TERM_GOOD"|skip)
-			tag="$state"-"$rev" ;;
-		*)
-			die "$(eval_gettext "Bad bisect_write argument: \$state")" ;;
-	esac
-	git update-ref "refs/bisect/$tag" "$rev" || exit
-	echo "# $state: $(git show-branch $rev)" >>"$GIT_DIR/BISECT_LOG"
-	test -n "$nolog" || echo "git bisect $state $rev" >>"$GIT_DIR/BISECT_LOG"
-}
-
 bisect_skip() {
 	all=''
 	for arg in "$@"
@@ -249,129 +51,11 @@ bisect_skip() {
 		esac
 		all="$all $revs"
 	done
-	eval bisect_state 'skip' $all
-}
-
-bisect_state() {
-	bisect_autostart
-	state=$1
-	check_and_set_terms $state
-	case "$#,$state" in
-	0,*)
-		die "Please call 'bisect_state' with at least one argument." ;;
-	1,"$TERM_BAD"|1,"$TERM_GOOD"|1,skip)
-		bisected_head=$(bisect_head)
-		rev=$(git rev-parse --verify "$bisected_head") ||
-			die "$(eval_gettext "Bad rev input: \$bisected_head")"
-		bisect_write "$state" "$rev"
-		git bisect--helper --check-expected-revs "$rev" ;;
-	2,"$TERM_BAD"|*,"$TERM_GOOD"|*,skip)
-		shift
-		hash_list=''
-		for rev in "$@"
-		do
-			sha=$(git rev-parse --verify "$rev^{commit}") ||
-				die "$(eval_gettext "Bad rev input: \$rev")"
-			hash_list="$hash_list $sha"
-		done
-		for rev in $hash_list
-		do
-			bisect_write "$state" "$rev"
-		done
-		git bisect--helper --check-expected-revs $hash_list ;;
-	*,"$TERM_BAD")
-		die "$(eval_gettext "'git bisect \$TERM_BAD' can take only one argument.")" ;;
-	*)
-		usage ;;
-	esac
-	bisect_auto_next
-}
-
-bisect_next_check() {
-	missing_good= missing_bad=
-	git show-ref -q --verify refs/bisect/$TERM_BAD || missing_bad=t
-	test -n "$(git for-each-ref "refs/bisect/$TERM_GOOD-*")" || missing_good=t
-
-	case "$missing_good,$missing_bad,$1" in
-	,,*)
-		: have both $TERM_GOOD and $TERM_BAD - ok
-		;;
-	*,)
-		# do not have both but not asked to fail - just report.
-		false
-		;;
-	t,,"$TERM_GOOD")
-		# have bad (or new) but not good (or old).  we could bisect although
-		# this is less optimum.
-		eval_gettextln "Warning: bisecting only with a \$TERM_BAD commit." >&2
-		if test -t 0
-		then
-			# TRANSLATORS: Make sure to include [Y] and [n] in your
-			# translation. The program will only accept English input
-			# at this point.
-			gettext "Are you sure [Y/n]? " >&2
-			read yesno
-			case "$yesno" in [Nn]*) exit 1 ;; esac
-		fi
-		: bisect without $TERM_GOOD...
-		;;
-	*)
-		bad_syn=$(bisect_voc bad)
-		good_syn=$(bisect_voc good)
-		if test -s "$GIT_DIR/BISECT_START"
-		then
-
-			eval_gettextln "You need to give me at least one \$bad_syn and one \$good_syn revision.
-(You can use \"git bisect \$bad_syn\" and \"git bisect \$good_syn\" for that.)" >&2
-		else
-			eval_gettextln "You need to start by \"git bisect start\".
-You then need to give me at least one \$good_syn and one \$bad_syn revision.
-(You can use \"git bisect \$bad_syn\" and \"git bisect \$good_syn\" for that.)" >&2
-		fi
-		exit 1 ;;
-	esac
-}
-
-bisect_auto_next() {
-	bisect_next_check && bisect_next || :
-}
-
-bisect_next() {
-	case "$#" in 0) ;; *) usage ;; esac
-	bisect_autostart
-	bisect_next_check $TERM_GOOD
-
-	# Perform all bisection computation, display and checkout
-	git bisect--helper --next-all $(test -f "$GIT_DIR/BISECT_HEAD" && echo --no-checkout)
-	res=$?
-
-	# Check if we should exit because bisection is finished
-	if test $res -eq 10
-	then
-		bad_rev=$(git show-ref --hash --verify refs/bisect/$TERM_BAD)
-		bad_commit=$(git show-branch $bad_rev)
-		echo "# first $TERM_BAD commit: $bad_commit" >>"$GIT_DIR/BISECT_LOG"
-		exit 0
-	elif test $res -eq 2
-	then
-		echo "# only skipped commits left to test" >>"$GIT_DIR/BISECT_LOG"
-		good_revs=$(git for-each-ref --format="%(objectname)" "refs/bisect/$TERM_GOOD-*")
-		for skipped in $(git rev-list refs/bisect/$TERM_BAD --not $good_revs)
-		do
-			skipped_commit=$(git show-branch $skipped)
-			echo "# possible first $TERM_BAD commit: $skipped_commit" >>"$GIT_DIR/BISECT_LOG"
-		done
-		exit $res
-	fi
-
-	# Check for an error in the bisection process
-	test $res -ne 0 && exit $res
-
-	return 0
+	eval git bisect--helper --bisect-state 'skip' $all
 }
 
 bisect_visualize() {
-	bisect_next_check fail
+	git bisect--helper --bisect-next-check $TERM_GOOD $TERM_BAD fail || exit
 
 	if test $# = 0
 	then
@@ -393,36 +77,13 @@ bisect_visualize() {
 	eval '"$@"' --bisect -- $(cat "$GIT_DIR/BISECT_NAMES")
 }
 
-bisect_reset() {
-	test -s "$GIT_DIR/BISECT_START" || {
-		gettextln "We are not bisecting."
-		return
-	}
-	case "$#" in
-	0) branch=$(cat "$GIT_DIR/BISECT_START") ;;
-	1) git rev-parse --quiet --verify "$1^{commit}" >/dev/null || {
-			invalid="$1"
-			die "$(eval_gettext "'\$invalid' is not a valid commit")"
-		}
-		branch="$1" ;;
-	*)
-		usage ;;
-	esac
-
-	if ! test -f "$GIT_DIR/BISECT_HEAD" && ! git checkout "$branch" --
-	then
-		die "$(eval_gettext "Could not check out original HEAD '\$branch'.
-Try 'git bisect reset <commit>'.")"
-	fi
-	git bisect--helper --bisect-clean-state || exit
-}
-
 bisect_replay () {
 	file="$1"
 	test "$#" -eq 1 || die "$(gettext "No logfile given")"
 	test -r "$file" || die "$(eval_gettext "cannot read \$file for replaying")"
-	bisect_reset
-	while read git bisect command rev
+	git bisect--helper --bisect-reset || exit
+	oIFS="$IFS" IFS="$IFS$(printf '\015')"
+	while read git bisect command rev tail
 	do
 		test "$git $bisect" = "git bisect" || test "$git" = "git-bisect" || continue
 		if test "$git" = "git-bisect"
@@ -431,24 +92,25 @@ bisect_replay () {
 			command="$bisect"
 		fi
 		get_terms
-		check_and_set_terms "$command"
+		git bisect--helper --check-and-set-terms "$command" "$TERM_GOOD" "$TERM_BAD" || exit
+		get_terms
 		case "$command" in
 		start)
-			cmd="bisect_start $rev"
-			eval "$cmd" ;;
+			eval "git bisect--helper --bisect-start $rev $tail" ;;
 		"$TERM_GOOD"|"$TERM_BAD"|skip)
-			bisect_write "$command" "$rev" ;;
+			git bisect--helper --bisect-write "$command" "$rev" "$TERM_GOOD" "$TERM_BAD" || exit;;
 		terms)
-			bisect_terms $rev ;;
+			git bisect--helper --bisect-terms $rev || exit;;
 		*)
 			die "$(gettext "?? what are you talking about?")" ;;
 		esac
 	done <"$file"
-	bisect_auto_next
+	IFS="$oIFS"
+	git bisect--helper --bisect-auto-next || exit
 }
 
 bisect_run () {
-	bisect_next_check fail
+	git bisect--helper --bisect-next-check $TERM_GOOD $TERM_BAD fail || exit
 
 	test -n "$*" || die "$(gettext "bisect run failed: no command provided.")"
 
@@ -479,8 +141,7 @@ exit code \$res from '\$command' is < 0 or >= 128" >&2
 			state="$TERM_GOOD"
 		fi
 
-		# We have to use a subshell because "bisect_state" can exit.
-		( bisect_state $state >"$GIT_DIR/BISECT_RUN" )
+		git bisect--helper --bisect-state $state >"$GIT_DIR/BISECT_RUN"
 		res=$?
 
 		cat "$GIT_DIR/BISECT_RUN"
@@ -495,7 +156,7 @@ exit code \$res from '\$command' is < 0 or >= 128" >&2
 		if [ $res -ne 0 ]
 		then
 			eval_gettextln "bisect run failed:
-'bisect_state \$state' exited with error code \$res" >&2
+'bisect-state \$state' exited with error code \$res" >&2
 			exit $res
 		fi
 
@@ -523,74 +184,6 @@ get_terms () {
 	fi
 }
 
-check_and_set_terms () {
-	cmd="$1"
-	case "$cmd" in
-	skip|start|terms) ;;
-	*)
-		if test -s "$GIT_DIR/BISECT_TERMS" && test "$cmd" != "$TERM_BAD" && test "$cmd" != "$TERM_GOOD"
-		then
-			die "$(eval_gettext "Invalid command: you're currently in a \$TERM_BAD/\$TERM_GOOD bisect.")"
-		fi
-		case "$cmd" in
-		bad|good)
-			if ! test -s "$GIT_DIR/BISECT_TERMS"
-			then
-				TERM_BAD=bad
-				TERM_GOOD=good
-				git bisect--helper --write-terms "$TERM_BAD" "$TERM_GOOD" || exit
-			fi
-			;;
-		new|old)
-			if ! test -s "$GIT_DIR/BISECT_TERMS"
-			then
-				TERM_BAD=new
-				TERM_GOOD=old
-				git bisect--helper --write-terms "$TERM_BAD" "$TERM_GOOD" || exit
-			fi
-			;;
-		esac ;;
-	esac
-}
-
-bisect_voc () {
-	case "$1" in
-	bad) echo "bad|new" ;;
-	good) echo "good|old" ;;
-	esac
-}
-
-bisect_terms () {
-	get_terms
-	if ! test -s "$GIT_DIR/BISECT_TERMS"
-	then
-		die "$(gettext "no terms defined")"
-	fi
-	case "$#" in
-	0)
-		gettextln "Your current terms are $TERM_GOOD for the old state
-and $TERM_BAD for the new state."
-		;;
-	1)
-		arg=$1
-		case "$arg" in
-			--term-good|--term-old)
-				printf '%s\n' "$TERM_GOOD"
-				;;
-			--term-bad|--term-new)
-				printf '%s\n' "$TERM_BAD"
-				;;
-			*)
-				die "$(eval_gettext "invalid argument \$arg for 'git bisect terms'.
-Supported options are: --term-good|--term-old and --term-bad|--term-new.")"
-				;;
-		esac
-		;;
-	*)
-		usage ;;
-	esac
-}
-
 case "$#" in
 0)
 	usage ;;
@@ -602,18 +195,18 @@ case "$#" in
 	help)
 		git bisect -h ;;
 	start)
-		bisect_start "$@" ;;
+		git bisect--helper --bisect-start "$@" ;;
 	bad|good|new|old|"$TERM_BAD"|"$TERM_GOOD")
-		bisect_state "$cmd" "$@" ;;
+		git bisect--helper --bisect-state "$cmd" "$@" ;;
 	skip)
 		bisect_skip "$@" ;;
 	next)
 		# Not sure we want "next" at the UI level anymore.
-		bisect_next "$@" ;;
+		git bisect--helper --bisect-next "$@" || exit ;;
 	visualize|view)
 		bisect_visualize "$@" ;;
 	reset)
-		bisect_reset "$@" ;;
+		git bisect--helper --bisect-reset "$@" ;;
 	replay)
 		bisect_replay "$@" ;;
 	log)
@@ -621,7 +214,7 @@ case "$#" in
 	run)
 		bisect_run "$@" ;;
 	terms)
-		bisect_terms "$@" ;;
+		git bisect--helper --bisect-terms "$@" || exit;;
 	*)
 		usage ;;
 	esac