diff options
Diffstat (limited to 't/t1006-cat-file.sh')
| -rwxr-xr-x | t/t1006-cat-file.sh | 488 |
1 files changed, 305 insertions, 183 deletions
diff --git a/t/t1006-cat-file.sh b/t/t1006-cat-file.sh index ff9bf213aa..1f61b666a7 100755 --- a/t/t1006-cat-file.sh +++ b/t/t1006-cat-file.sh @@ -3,6 +3,7 @@ test_description='git cat-file' . ./test-lib.sh +. "$TEST_DIRECTORY/lib-loose.sh" test_cmdmode_usage () { test_expect_code 129 "$@" 2>err && @@ -112,65 +113,55 @@ strlen () { run_tests () { type=$1 - oid=$2 - size=$3 - content=$4 - pretty_content=$5 + object_name="$2" + mode=$3 + size=$4 + content=$5 + pretty_content=$6 + oid=${7:-"$object_name"} batch_output="$oid $type $size $content" test_expect_success "$type exists" ' - git cat-file -e $oid + git cat-file -e "$object_name" ' test_expect_success "Type of $type is correct" ' echo $type >expect && - git cat-file -t $oid >actual && + git cat-file -t "$object_name" >actual && test_cmp expect actual ' test_expect_success "Size of $type is correct" ' echo $size >expect && - git cat-file -s $oid >actual && - test_cmp expect actual - ' - - test_expect_success "Type of $type is correct using --allow-unknown-type" ' - echo $type >expect && - git cat-file -t --allow-unknown-type $oid >actual && - test_cmp expect actual - ' - - test_expect_success "Size of $type is correct using --allow-unknown-type" ' - echo $size >expect && - git cat-file -s --allow-unknown-type $oid >actual && + git cat-file -s "$object_name" >actual && test_cmp expect actual ' test -z "$content" || test_expect_success "Content of $type is correct" ' echo_without_newline "$content" >expect && - git cat-file $type $oid >actual && + git cat-file $type "$object_name" >actual && test_cmp expect actual ' test_expect_success "Pretty content of $type is correct" ' echo_without_newline "$pretty_content" >expect && - git cat-file -p $oid >actual && + git cat-file -p "$object_name" >actual && test_cmp expect actual ' test -z "$content" || test_expect_success "--batch output of $type is correct" ' echo "$batch_output" >expect && - echo $oid | git cat-file --batch >actual && + echo "$object_name" | git cat-file --batch >actual && test_cmp expect actual ' test_expect_success "--batch-check output of $type is correct" ' echo "$oid $type $size" >expect && - echo_without_newline $oid | git cat-file --batch-check >actual && + echo_without_newline "$object_name" | git cat-file --batch-check >actual && test_cmp expect actual ' @@ -179,13 +170,13 @@ $content" test -z "$content" || test_expect_success "--batch-command $opt output of $type content is correct" ' echo "$batch_output" >expect && - test_write_lines "contents $oid" | git cat-file --batch-command $opt >actual && + test_write_lines "contents $object_name" | git cat-file --batch-command $opt >actual && test_cmp expect actual ' test_expect_success "--batch-command $opt output of $type info is correct" ' echo "$oid $type $size" >expect && - test_write_lines "info $oid" | + test_write_lines "info $object_name" | git cat-file --batch-command $opt >actual && test_cmp expect actual ' @@ -193,30 +184,45 @@ $content" test_expect_success "custom --batch-check format" ' echo "$type $oid" >expect && - echo $oid | git cat-file --batch-check="%(objecttype) %(objectname)" >actual && + echo "$object_name" | git cat-file --batch-check="%(objecttype) %(objectname)" >actual && test_cmp expect actual ' test_expect_success "custom --batch-command format" ' echo "$type $oid" >expect && - echo "info $oid" | git cat-file --batch-command="%(objecttype) %(objectname)" >actual && + echo "info $object_name" | git cat-file --batch-command="%(objecttype) %(objectname)" >actual && test_cmp expect actual ' - test_expect_success '--batch-check with %(rest)' ' + # FIXME: %(rest) is incompatible with object names that include whitespace, + # e.g. HEAD:path/to/a/file with spaces. Use the resolved OID as input to + # test this instead of the raw object name. + if echo "$object_name" | grep -q " "; then + test_rest=test_expect_failure + else + test_rest=test_expect_success + fi + + $test_rest '--batch-check with %(rest)' ' echo "$type this is some extra content" >expect && - echo "$oid this is some extra content" | + echo "$object_name this is some extra content" | git cat-file --batch-check="%(objecttype) %(rest)" >actual && test_cmp expect actual ' + test_expect_success '--batch-check with %(objectmode)' ' + echo "$mode $oid" >expect && + echo $object_name | git cat-file --batch-check="%(objectmode) %(objectname)" >actual && + test_cmp expect actual + ' + test -z "$content" || test_expect_success "--batch without type ($type)" ' { echo "$size" && echo "$content" } >expect && - echo $oid | git cat-file --batch="%(objectsize)" >actual && + echo "$object_name" | git cat-file --batch="%(objectsize)" >actual && test_cmp expect actual ' @@ -226,7 +232,7 @@ $content" echo "$type" && echo "$content" } >expect && - echo $oid | git cat-file --batch="%(objecttype)" >actual && + echo "$object_name" | git cat-file --batch="%(objecttype)" >actual && test_cmp expect actual ' } @@ -240,13 +246,15 @@ test_expect_success "setup" ' git config extensions.objectformat $test_hash_algo && git config extensions.compatobjectformat $test_compat_hash_algo && echo_without_newline "$hello_content" > hello && - git update-index --add hello + git update-index --add hello && + echo_without_newline "$hello_content" > "path with spaces" && + git update-index --add --chmod=+x "path with spaces" && + git commit -m "add hello file" ' run_blob_tests () { oid=$1 - - run_tests 'blob' $oid $hello_size "$hello_content" "$hello_content" + run_tests 'blob' $oid "" $hello_size "$hello_content" "$hello_content" test_expect_success '--batch-command --buffer with flush for blob info' ' echo "$oid blob $hello_size" >expect && @@ -279,13 +287,17 @@ test_expect_success '--batch-check without %(rest) considers whole line' ' tree_oid=$(git write-tree) tree_compat_oid=$(git rev-parse --output-object-format=$test_compat_hash_algo $tree_oid) -tree_size=$(($(test_oid rawsz) + 13)) -tree_compat_size=$(($(test_oid --hash=compat rawsz) + 13)) -tree_pretty_content="100644 blob $hello_oid hello${LF}" -tree_compat_pretty_content="100644 blob $hello_compat_oid hello${LF}" - -run_tests 'tree' $tree_oid $tree_size "" "$tree_pretty_content" -run_tests 'tree' $tree_compat_oid $tree_compat_size "" "$tree_compat_pretty_content" +tree_size=$((2 * $(test_oid rawsz) + 13 + 24)) +tree_compat_size=$((2 * $(test_oid --hash=compat rawsz) + 13 + 24)) +tree_pretty_content="100644 blob $hello_oid hello${LF}100755 blob $hello_oid path with spaces${LF}" +tree_compat_pretty_content="100644 blob $hello_compat_oid hello${LF}100755 blob $hello_compat_oid path with spaces${LF}" + +run_tests 'tree' $tree_oid "" $tree_size "" "$tree_pretty_content" +run_tests 'tree' $tree_compat_oid "" $tree_compat_size "" "$tree_compat_pretty_content" +run_tests 'blob' "$tree_oid:hello" "100644" $hello_size "" "$hello_content" $hello_oid +run_tests 'blob' "$tree_compat_oid:hello" "100644" $hello_size "" "$hello_content" $hello_compat_oid +run_tests 'blob' "$tree_oid:path with spaces" "100755" $hello_size "" "$hello_content" $hello_oid +run_tests 'blob' "$tree_compat_oid:path with spaces" "100755" $hello_size "" "$hello_content" $hello_compat_oid commit_message="Initial commit" commit_oid=$(echo_without_newline "$commit_message" | git commit-tree $tree_oid) @@ -304,8 +316,8 @@ committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE $commit_message" -run_tests 'commit' $commit_oid $commit_size "$commit_content" "$commit_content" -run_tests 'commit' $commit_compat_oid $commit_compat_size "$commit_compat_content" "$commit_compat_content" +run_tests 'commit' $commit_oid "" $commit_size "$commit_content" "$commit_content" +run_tests 'commit' $commit_compat_oid "" $commit_compat_size "$commit_compat_content" "$commit_compat_content" tag_header_without_oid="type blob tag hellotag @@ -328,8 +340,8 @@ tag_size=$(strlen "$tag_content") tag_compat_oid=$(git rev-parse --output-object-format=$test_compat_hash_algo $tag_oid) tag_compat_size=$(strlen "$tag_compat_content") -run_tests 'tag' $tag_oid $tag_size "$tag_content" "$tag_content" -run_tests 'tag' $tag_compat_oid $tag_compat_size "$tag_compat_content" "$tag_compat_content" +run_tests 'tag' $tag_oid "" $tag_size "$tag_content" "$tag_content" +run_tests 'tag' $tag_compat_oid "" $tag_compat_size "$tag_compat_content" "$tag_compat_content" test_expect_success "Reach a blob from a tag pointing to it" ' echo_without_newline "$hello_content" >expect && @@ -602,6 +614,34 @@ test_expect_success FUNNYNAMES '--batch-check, -Z with newline in input' ' test_cmp expect actual ' +test_expect_success 'setup with curly braches in input' ' + git branch "foo{bar" HEAD && + git branch "foo@" HEAD +' + +test_expect_success 'object reference with curly brace' ' + git cat-file -p "foo{bar:hello" >actual && + git cat-file -p HEAD:hello >expect && + test_cmp expect actual +' + +test_expect_success 'object reference with at-sign' ' + git cat-file -p "foo@@{0}:hello" >actual && + git cat-file -p HEAD:hello >expect && + test_cmp expect actual +' + +test_expect_success 'setup with commit with colon' ' + git commit-tree -m "testing: just a bunch of junk" HEAD^{tree} >out && + git branch other $(cat out) +' + +test_expect_success 'object reference via commit text search' ' + git cat-file -p "other^{/testing:}:hello" >actual && + git cat-file -p HEAD:hello >expect && + test_cmp expect actual +' + test_expect_success 'setup blobs which are likely to delta' ' test-tool genrandom foo 10240 >foo && { cat foo && echo plus; } >foo-plus && @@ -640,103 +680,75 @@ test_expect_success 'setup bogus data' ' bogus_short_type="bogus" && bogus_short_content="bogus" && bogus_short_size=$(strlen "$bogus_short_content") && - bogus_short_oid=$(echo_without_newline "$bogus_short_content" | git hash-object -t $bogus_short_type --literally -w --stdin) && + bogus_short_oid=$(echo_without_newline "$bogus_short_content" | loose_obj .git/objects $bogus_short_type) && bogus_long_type="abcdefghijklmnopqrstuvwxyz1234679" && bogus_long_content="bogus" && bogus_long_size=$(strlen "$bogus_long_content") && - bogus_long_oid=$(echo_without_newline "$bogus_long_content" | git hash-object -t $bogus_long_type --literally -w --stdin) + bogus_long_oid=$(echo_without_newline "$bogus_long_content" | loose_obj .git/objects $bogus_long_type) ' -for arg1 in '' --allow-unknown-type +for arg1 in -s -t -p do - for arg2 in -s -t -p - do - if test "$arg1" = "--allow-unknown-type" && test "$arg2" = "-p" - then - continue - fi + test_expect_success "cat-file $arg1 error on bogus short OID" ' + cat >expect <<-\EOF && + fatal: invalid object type + EOF + test_must_fail git cat-file $arg1 $bogus_short_oid >out 2>actual && + test_must_be_empty out && + test_cmp expect actual + ' - test_expect_success "cat-file $arg1 $arg2 error on bogus short OID" ' - cat >expect <<-\EOF && - fatal: invalid object type + test_expect_success "cat-file $arg1 error on bogus full OID" ' + if test "$arg1" = "-p" + then + cat >expect <<-EOF + error: header for $bogus_long_oid too long, exceeds 32 bytes + fatal: Not a valid object name $bogus_long_oid EOF + else + cat >expect <<-EOF + error: header for $bogus_long_oid too long, exceeds 32 bytes + fatal: git cat-file: could not get object info + EOF + fi && - if test "$arg1" = "--allow-unknown-type" - then - git cat-file $arg1 $arg2 $bogus_short_oid - else - test_must_fail git cat-file $arg1 $arg2 $bogus_short_oid >out 2>actual && - test_must_be_empty out && - test_cmp expect actual - fi - ' + test_must_fail git cat-file $arg1 $bogus_long_oid >out 2>actual && + test_must_be_empty out && + test_cmp expect actual + ' - test_expect_success "cat-file $arg1 $arg2 error on bogus full OID" ' - if test "$arg2" = "-p" - then - cat >expect <<-EOF - error: header for $bogus_long_oid too long, exceeds 32 bytes - fatal: Not a valid object name $bogus_long_oid - EOF - else - cat >expect <<-EOF - error: header for $bogus_long_oid too long, exceeds 32 bytes - fatal: git cat-file: could not get object info - EOF - fi && - - if test "$arg1" = "--allow-unknown-type" - then - git cat-file $arg1 $arg2 $bogus_short_oid - else - test_must_fail git cat-file $arg1 $arg2 $bogus_long_oid >out 2>actual && - test_must_be_empty out && - test_cmp expect actual - fi - ' + test_expect_success "cat-file $arg1 error on missing short OID" ' + cat >expect.err <<-EOF && + fatal: Not a valid object name $(test_oid deadbeef_short) + EOF + test_must_fail git cat-file $arg1 $(test_oid deadbeef_short) >out 2>err.actual && + test_must_be_empty out && + test_cmp expect.err err.actual + ' - test_expect_success "cat-file $arg1 $arg2 error on missing short OID" ' - cat >expect.err <<-EOF && - fatal: Not a valid object name $(test_oid deadbeef_short) + test_expect_success "cat-file $arg1 error on missing full OID" ' + if test "$arg1" = "-p" + then + cat >expect.err <<-EOF + fatal: Not a valid object name $(test_oid deadbeef) EOF - test_must_fail git cat-file $arg1 $arg2 $(test_oid deadbeef_short) >out 2>err.actual && - test_must_be_empty out && - test_cmp expect.err err.actual - ' - - test_expect_success "cat-file $arg1 $arg2 error on missing full OID" ' - if test "$arg2" = "-p" - then - cat >expect.err <<-EOF - fatal: Not a valid object name $(test_oid deadbeef) - EOF - else - cat >expect.err <<-\EOF - fatal: git cat-file: could not get object info - EOF - fi && - test_must_fail git cat-file $arg1 $arg2 $(test_oid deadbeef) >out 2>err.actual && - test_must_be_empty out && - test_cmp expect.err err.actual - ' - done + else + cat >expect.err <<-\EOF + fatal: git cat-file: could not get object info + EOF + fi && + test_must_fail git cat-file $arg1 $(test_oid deadbeef) >out 2>err.actual && + test_must_be_empty out && + test_cmp expect.err err.actual + ' done -test_expect_success '-e is OK with a broken object without --allow-unknown-type' ' +test_expect_success '-e is OK with a broken object' ' git cat-file -e $bogus_short_oid ' -test_expect_success '-e can not be combined with --allow-unknown-type' ' - test_expect_code 128 git cat-file -e --allow-unknown-type $bogus_short_oid -' - -test_expect_success '-p cannot print a broken object even with --allow-unknown-type' ' - test_must_fail git cat-file -p $bogus_short_oid && - test_expect_code 128 git cat-file -p --allow-unknown-type $bogus_short_oid -' - test_expect_success '<type> <hash> does not work with objects of broken types' ' cat >err.expect <<-\EOF && fatal: invalid object type "bogus" @@ -759,60 +771,8 @@ test_expect_success 'broken types combined with --batch and --batch-check' ' test_cmp err.expect err.actual ' -test_expect_success 'the --batch and --batch-check options do not combine with --allow-unknown-type' ' - test_expect_code 128 git cat-file --batch --allow-unknown-type <bogus-oid && - test_expect_code 128 git cat-file --batch-check --allow-unknown-type <bogus-oid -' - -test_expect_success 'the --allow-unknown-type option does not consider replacement refs' ' - cat >expect <<-EOF && - $bogus_short_type - EOF - git cat-file -t --allow-unknown-type $bogus_short_oid >actual && - test_cmp expect actual && - - # Create it manually, as "git replace" will die on bogus - # types. - head=$(git rev-parse --verify HEAD) && - test_when_finished "test-tool ref-store main delete-refs 0 msg refs/replace/$bogus_short_oid" && - test-tool ref-store main update-ref msg "refs/replace/$bogus_short_oid" $head $ZERO_OID REF_SKIP_OID_VERIFICATION && - - cat >expect <<-EOF && - commit - EOF - git cat-file -t --allow-unknown-type $bogus_short_oid >actual && - test_cmp expect actual -' - -test_expect_success "Type of broken object is correct" ' - echo $bogus_short_type >expect && - git cat-file -t --allow-unknown-type $bogus_short_oid >actual && - test_cmp expect actual -' - -test_expect_success "Size of broken object is correct" ' - echo $bogus_short_size >expect && - git cat-file -s --allow-unknown-type $bogus_short_oid >actual && - test_cmp expect actual -' - -test_expect_success 'clean up broken object' ' - rm .git/objects/$(test_oid_to_path $bogus_short_oid) -' - -test_expect_success "Type of broken object is correct when type is large" ' - echo $bogus_long_type >expect && - git cat-file -t --allow-unknown-type $bogus_long_oid >actual && - test_cmp expect actual -' - -test_expect_success "Size of large broken object is correct when type is large" ' - echo $bogus_long_size >expect && - git cat-file -s --allow-unknown-type $bogus_long_oid >actual && - test_cmp expect actual -' - -test_expect_success 'clean up broken object' ' +test_expect_success 'clean up broken objects' ' + rm .git/objects/$(test_oid_to_path $bogus_short_oid) && rm .git/objects/$(test_oid_to_path $bogus_long_oid) ' @@ -874,6 +834,40 @@ test_expect_success 'cat-file -t and -s on corrupt loose object' ' ) ' +test_expect_success 'object reading handles zlib dictionary' - <<\EOT + echo 'content that will be recompressed' >file && + blob=$(git hash-object -w file) && + objpath=.git/objects/$(test_oid_to_path "$blob") && + + # Recompress a loose object using a precomputed zlib dictionary. + # This was originally done with: + # + # perl -MCompress::Raw::Zlib -e ' + # binmode STDIN; + # binmode STDOUT; + # my $data = do { local $/; <STDIN> }; + # my $in = new Compress::Raw::Zlib::Inflate; + # my $de = new Compress::Raw::Zlib::Deflate( + # -Dictionary => "anything" + # ); + # $in->inflate($data, $raw); + # $de->deflate($raw, $out); + # print $out; + # ' <obj.bak >$objpath + # + # but we do not want to require the perl module for all test runs (nor + # carry a custom t/helper program that uses zlib features we don't + # otherwise care about). + mv "$objpath" obj.bak && + test_when_finished 'mv obj.bak "$objpath"' && + printf '\170\273\017\112\003\143' >$objpath && + + test_must_fail git cat-file blob $blob 2>err && + test_grep ! 'too long' err && + test_grep 'error: unable to unpack' err && + test_grep 'error: inflate: needs dictionary' err +EOT + # Tests for git cat-file --follow-symlinks test_expect_success 'prep for symlink tests' ' echo_without_newline "$hello_content" >morx && @@ -1226,6 +1220,31 @@ test_expect_success 'cat-file --batch-check respects replace objects' ' test_cmp expect actual ' +test_expect_success 'batch-check with a submodule' ' + # FIXME: this call to mktree is incompatible with compatObjectFormat + # because the submodule OID cannot be mapped to the compat hash algo. + test_unconfig extensions.compatobjectformat && + printf "160000 commit $(test_oid deadbeef)\tsub\n" >tree-with-sub && + tree=$(git mktree <tree-with-sub) && + test_config extensions.compatobjectformat $test_compat_hash_algo && + + git cat-file --batch-check >actual <<-EOF && + $tree:sub + EOF + printf "$(test_oid deadbeef) submodule\n" >expect && + test_cmp expect actual +' + +test_expect_success 'batch-check with a submodule, object exists' ' + printf "160000 commit $commit_oid\tsub\n" >tree-with-sub && + tree=$(git mktree <tree-with-sub) && + git cat-file --batch-check >actual <<-EOF && + $tree:sub + EOF + printf "$commit_oid commit $commit_size\n" >expect && + test_cmp expect actual +' + # Pull the entry for object with oid "$1" out of the output of # "cat-file --batch", including its object content (which requires # parsing and reading a set amount of bytes, hence perl). @@ -1241,7 +1260,7 @@ extract_batch_output () { ' "$@" } -test_expect_success 'cat-file --batch-all-objects --batch ignores replace' ' +test_expect_success PERL_TEST_HELPERS 'cat-file --batch-all-objects --batch ignores replace' ' git cat-file --batch-all-objects --batch >actual.raw && extract_batch_output $orig <actual.raw >actual && { @@ -1294,7 +1313,7 @@ test_expect_success 'batch-command flush without --buffer' ' grep "^fatal:.*flush is only for --buffer mode.*" err ' -script=' +perl_script=' use warnings; use strict; use IPC::Open2; @@ -1316,12 +1335,115 @@ $? == 0 or die "\$?=$?"; expect="$hello_oid blob $hello_size" -test_expect_success PERL '--batch-check is unbuffered by default' ' - perl -e "$script" -- --batch-check $hello_oid "$expect" +test_lazy_prereq PERL_IPC_OPEN2 ' + perl -MIPC::Open2 -e "exit 0" +' + +test_expect_success PERL_IPC_OPEN2 '--batch-check is unbuffered by default' ' + perl -e "$perl_script" -- --batch-check $hello_oid "$expect" +' + +test_expect_success PERL_IPC_OPEN2 '--batch-command info is unbuffered by default' ' + perl -e "$perl_script" -- --batch-command $hello_oid "$expect" "info " +' + +test_expect_success 'setup for objects filter' ' + git init repo && + ( + # Seed the repository with four different sets of objects: + # + # - The first set is fully packed and has a bitmap. + # - The second set is packed, but has no bitmap. + # - The third set is loose. + # - The fourth set is loose and contains big objects. + # + # This ensures that we cover all these types as expected. + cd repo && + test_commit first && + git repack -Adb && + test_commit second && + git repack -d && + test_commit third && + + for n in 1000 10000 + do + printf "%"$n"s" X >large.$n || return 1 + done && + git add large.* && + git commit -m fourth + ) +' + +test_expect_success 'objects filter with unknown option' ' + cat >expect <<-EOF && + fatal: invalid filter-spec ${SQ}unknown${SQ} + EOF + test_must_fail git -C repo cat-file --filter=unknown 2>err && + test_cmp expect err ' -test_expect_success PERL '--batch-command info is unbuffered by default' ' - perl -e "$script" -- --batch-command $hello_oid "$expect" "info " +for option in sparse:oid=1234 tree:1 sparse:path=x +do + test_expect_success "objects filter with unsupported option $option" ' + case "$option" in + tree:1) + echo "usage: objects filter not supported: ${SQ}tree${SQ}" >expect + ;; + sparse:path=x) + echo "fatal: sparse:path filters support has been dropped" >expect + ;; + *) + option_name=$(echo "$option" | cut -d= -f1) && + printf "usage: objects filter not supported: ${SQ}%s${SQ}\n" "$option_name" >expect + ;; + esac && + test_must_fail git -C repo cat-file --filter=$option 2>err && + test_cmp expect err + ' +done + +test_expect_success 'objects filter: disabled' ' + git -C repo cat-file --batch-check="%(objectname)" --batch-all-objects --no-filter >actual && + sort actual >actual.sorted && + git -C repo rev-list --objects --no-object-names --all >expect && + sort expect >expect.sorted && + test_cmp expect.sorted actual.sorted ' +test_objects_filter () { + filter="$1" + + test_expect_success "objects filter: $filter" ' + git -C repo cat-file --batch-check="%(objectname)" --batch-all-objects --filter="$filter" >actual && + sort actual >actual.sorted && + git -C repo rev-list --objects --no-object-names --all --filter="$filter" --filter-provided-objects >expect && + sort expect >expect.sorted && + test_cmp expect.sorted actual.sorted + ' + + test_expect_success "objects filter prints excluded objects: $filter" ' + # Find all objects that would be excluded by the current filter. + git -C repo rev-list --objects --no-object-names --all >all && + git -C repo rev-list --objects --no-object-names --all --filter="$filter" --filter-provided-objects >filtered && + sort all >all.sorted && + sort filtered >filtered.sorted && + comm -23 all.sorted filtered.sorted >expected.excluded && + test_line_count -gt 0 expected.excluded && + + git -C repo cat-file --batch-check="%(objectname)" --filter="$filter" <expected.excluded >actual && + awk "/excluded/{ print \$1 }" actual | sort >actual.excluded && + test_cmp expected.excluded actual.excluded + ' +} + +test_objects_filter "blob:none" +test_objects_filter "blob:limit=1" +test_objects_filter "blob:limit=500" +test_objects_filter "blob:limit=1000" +test_objects_filter "blob:limit=1k" +test_objects_filter "object:type=blob" +test_objects_filter "object:type=commit" +test_objects_filter "object:type=tag" +test_objects_filter "object:type=tree" + test_done |