| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Vincent Tam <sere@live.hk>
|
|
These error messages are intended for the user. Let's touch them up
since we're here from the previous commit.
Signed-off-by: Wolfgang Müller <wolf@oriole.systems>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Calling "git rev-parse --path-format" without an argument segfaults
instead of giving an error message. Commit fac60b8925 (rev-parse: add
option for absolute or relative path formatting, 2020-12-13) added the
argument parsing code but forgot to handle NULL.
Returning an error makes sense here because there is no default value we
could use. Add a test case to verify.
Signed-off-by: Wolfgang Müller <wolf@oriole.systems>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* Eliminated 'Negation of emptiness' of 'nenhum' (not one/none)
* Eliminated 'Negation of emptiness' of 'nada' (nothing)
* Transformed 'Não' (No) into affirmative
* Some other translations
* Transforming 'não' (no) into affirmative
* From junção-de-3 to tri-junção
Signed-off-by: Daniel Santos <hello@brighterdan.com>
|
|
Generate po/git.pot from v2.32.0-rc0 for git v2.32.0 l10n round 1.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Clarify the default length used for the abbreviated form used for
commits in git describe.
The behavior was modified in Git 2.11.0, but the documentation was not
updated to clarify the new behavior.
Signed-off-by: Anders Höckersten <anders@hockersten.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I sometimes receive patches from people with short mononyms, and in my
cultural environment these are not uncommon. To my dismay, git-am
currently discards their names, and replaces them with their email
addresses.
Link: https://www.kalzumeus.com/2010/06/17/falsehoods-programmers-believe-about-names/
Signed-off-by: edef <edef@edef.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sendemail.smtpServer configuration option and --smtp-server command
line option both support using a sendmail-like program to send emails by
specifying an absolute file path. However, this is not ideal for the
following reasons:
1. It overloads the meaning of smtpServer (now a program is being used
for the server?)
2. It doesn't allow for non-absolute paths, arguments, or arbitrary
scripting
Requiring an absolute path is bad for portability, as the same program
may be in different locations on different systems. If a user wishes to
pass arguments to their program, they have to use the smtpServerOption
option, which is cumbersome (as it must be repeated for each option) and
doesn't adhere to normal git conventions.
Introduce a new configuration option sendemail.sendmailCmd as well as a
command line option --sendmail-cmd that can be used to specify a command
(with or without arguments) or shell expression to run to send email.
The name of this option is consistent with --to-cmd and --cc-cmd. This
invocation honors the user's $PATH so that absolute paths are not
necessary. Arbitrary shell expressions are also supported, allowing
users to do basic scripting.
Give this option a higher precedence over --smtp-server and
sendemail.smtpServer, as the new interface is more flexible. For
backward compatibility, continue to support absolute paths in
--smtp-server and sendemail.smtpServer.
Signed-off-by: Gregory Anders <greg@gpanders.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ls/typofix:
pretty: fix a typo in the documentation for %(trailers)
|
|
The code to handle options recently added to "git stash show"
around untracked part of the stash segfaulted when these options
were used on a stash entry that does not record untracked part.
* dl/stash-show-untracked-fixup:
stash show: fix segfault with --{include,only}-untracked
t3905: correct test title
|
|
When "git update-ref -d" removes a ref that is packed, it left
empty directories under $GIT_DIR/refs/ for
* wc/packed-ref-removal-cleanup:
refs: cleanup directories when deleting packed ref
|
|
* lh/maintenance-leakfix:
maintenance: fix two memory leaks
|
|
A couple of trivial typofixes.
* ma/typofixes:
pretty-formats.txt: add missing space
git-repack.txt: remove spurious ")"
|
|
An i18n fix.
* ah/merge-ort-i18n:
merge-ort: split "distinct types" message into two translatable messages
|
|
"git mailinfo" (hence "git am") learned the "--quoted-cr" option to
control how lines ending with CRLF wrapped in base64 or qp are
handled.
* dd/mailinfo-quoted-cr:
am: learn to process quoted lines that ends with CRLF
mailinfo: allow stripping quoted CR without warning
mailinfo: allow squelching quoted CRLF warning
mailinfo: warn if CRLF found in decoded base64/QP email
mailinfo: stop parsing options manually
mailinfo: load default metainfo_charset lazily
|
|
Code clean-up.
* ab/sparse-index-cleanup:
sparse-index.c: remove set_index_sparse_config()
|
|
Code clean-up.
* ab/streaming-simplify:
streaming.c: move {open,close,read} from vtable to "struct git_istream"
streaming.c: stop passing around "object_info *" to open()
streaming.c: remove {open,close,read}_method_decl() macros
streaming.c: remove enum/function/vtbl indirection
streaming.c: avoid forward declarations
|
|
The final part of "parallel checkout".
* mt/parallel-checkout-part-3:
ci: run test round with parallel-checkout enabled
parallel-checkout: add tests related to .gitattributes
t0028: extract encoding helpers to lib-encoding.sh
parallel-checkout: add tests related to path collisions
parallel-checkout: add tests for basic operations
checkout-index: add parallel checkout support
builtin/checkout.c: complete parallel checkout support
make_transient_cache_entry(): optionally alloc from mem_pool
|
|
"git push" learns to discover common ancestor with the receiving
end over protocol v2.
* jt/push-negotiation:
send-pack: support push negotiation
fetch: teach independent negotiation (no packfile)
fetch-pack: refactor command and capability write
fetch-pack: refactor add_haves()
fetch-pack: refactor process_acks()
|
|
These strings have not been modified in any translation, nor should they
be.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* mt/clean-clean:
clean: remove unnecessary variable
|
|
"git add -i --dry-run" does not dry-run, which was surprising. The
combination of options has taught to error out.
* ow/no-dryrun-in-add-i:
add: die if both --dry-run and --interactive are given
|
|
"git p4" learned to find branch points more efficiently.
* jk/p4-locate-branch-point-optim:
git-p4: speed up search for branch parent
git-p4: ensure complex branches are cloned correctly
|
|
Over-the-wire protocol learns a new request type to ask for object
sizes given a list of object names.
* ba/object-info:
object-info: support for retrieving object info
|
|
Code clean-up.
* pw/patience-diff-clean-up:
patience diff: remove unused variable
patience diff: remove unnecessary string comparisons
|
|
The word-diff mode has been taught to work better with a word
regexp that can match an empty string.
* pw/word-diff-zero-width-matches:
word diff: handle zero length matches
|
|
In the original ref-filter design, it will copy the parsed
atom's name and attributes to `used_atom[i].name` in the
atom's parsing step, and use it again for string matching
in the later specific ref attributes filling step. It use
a lot of string matching to determine which atom we need.
Introduce the enum "atom_type", each enum value is named
as `ATOM_*`, which is the index of each corresponding
valid_atom entry. In the first step of the atom parsing,
`used_atom.atom_type` will record corresponding enum value
from valid_atom entry index, and then in specific reference
attribute filling step, only need to compare the value of
the `used_atom[i].atom_type` to check the atom type.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the support for "objectsize:disk" was bolted onto the
existing support for "objectsize", it didn't follow the
usual pattern for handling "atomtype:modifier", which reads
the <modifier> part just once while parsing the format
string, and store the parsed result in the union in the
used_atom structure, so that the string form of it does not
have to be parsed over and over at runtime (e.g. in
grab_common_values()).
Add a new member `objectsize` to the union `used_atom.u`,
so that we can separate the check of <modifier> from the
check of <atomtype>, this will bring scalability to atom
`%(objectsize)`.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Alexey Roslyakov <alexey.roslyakov@gmail.com>
|
|
Commit 878f988350 (t/test-lib: teach --chain-lint to detect broken
&&-chains in subshells, 2018-07-11) introduced additional chain-lint
tests which add an extra "sed" pipeline to each test we run. This has a
measurable impact on runtime. Here are timings with and without a new
environment variable (added by this patch) that lets you disable just
the additional sed-based chain-lint tests:
Benchmark #1: GIT_TEST_CHAIN_LINT_HARDER=1 make test
Time (mean ± σ): 64.202 s ± 1.030 s [User: 622.469 s, System: 301.402 s]
Range (min … max): 61.571 s … 65.662 s 10 runs
Benchmark #2: GIT_TEST_CHAIN_LINT_HARDER=0 make test
Time (mean ± σ): 57.591 s ± 0.333 s [User: 529.368 s, System: 270.618 s]
Range (min … max): 57.143 s … 58.309 s 10 runs
Summary
'GIT_TEST_CHAIN_LINT_HARDER=0 make test' ran
1.11 ± 0.02 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=1 make test'
Of course those extra lint checks are doing something useful, so paying
a few extra seconds (at least on Linux) isn't so bad (though note the
CPU time; we're bounded in our parallel run here by the slowest test, so
it really is ~120s of CPU improvement).
But we can observe that there are some test scripts where they produce a
much stronger effect, and provide less value. In t0027 and t3070 we run
a very large number of small tests, all driven by a series of
functions/loops which are filling in the test bodies. There we get much
less bang for our buck in terms of bug-finding versus CPU cost.
This patch introduces a mechanism for controlling when those extra
lint checks are run, at two levels:
- a user can ask to disable or to force-enable the checks by setting
GIT_TEST_CHAIN_LINT_HARDER
- if the user hasn't specified a preference, individual scripts can
disable the checks by setting GIT_TEST_CHAIN_LINT_HARDER_DEFAULT;
scripts which don't set that get the current behavior of enabling
them.
In addition, this patch flips the default for t0027 and t3070's
mass-generated sections to disable the extra checks. Here are the timing
results for t0027:
Benchmark #1: GIT_TEST_CHAIN_LINT_HARDER=1 ./t0027-auto-crlf.sh
Time (mean ± σ): 17.078 s ± 0.848 s [User: 14.878 s, System: 7.075 s]
Range (min … max): 15.952 s … 18.421 s 10 runs
Benchmark #2: GIT_TEST_CHAIN_LINT_HARDER=0 ./t0027-auto-crlf.sh
Time (mean ± σ): 9.063 s ± 0.759 s [User: 7.890 s, System: 3.362 s]
Range (min … max): 7.747 s … 10.619 s 10 runs
Benchmark #3: ./t0027-auto-crlf.sh
Time (mean ± σ): 9.186 s ± 0.881 s [User: 7.957 s, System: 3.427 s]
Range (min … max): 7.796 s … 10.498 s 10 runs
Summary
'GIT_TEST_CHAIN_LINT_HARDER=0 ./t0027-auto-crlf.sh' ran
1.01 ± 0.13 times faster than './t0027-auto-crlf.sh'
1.88 ± 0.18 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=1 ./t0027-auto-crlf.sh'
We can see that disabling the checks for the whole script buys us an
almost 2x speedup. But the new default behavior, disabling them only for
the mass-generated part, gets us most of that speedup (but still leaves
the checks on for further manual tests people might write).
As a side note, I'd caution about comparing runtimes and CPU seconds
between this timing and the earlier "make test" one. In "make test",
we're running a lot of scripts in parallel, so the CPU is throttling
down (and thus a CPU second saved here would count for more during a
parallel run; the same work takes more CPU seconds there).
We get similar results for t3070:
Benchmark #1: GIT_TEST_CHAIN_LINT_HARDER=1 ./t3070-wildmatch.sh
Time (mean ± σ): 20.054 s ± 3.967 s [User: 16.003 s, System: 8.286 s]
Range (min … max): 11.891 s … 23.671 s 10 runs
Benchmark #2: GIT_TEST_CHAIN_LINT_HARDER=0 ./t3070-wildmatch.sh
Time (mean ± σ): 12.399 s ± 2.256 s [User: 7.542 s, System: 5.342 s]
Range (min … max): 9.606 s … 15.727 s 10 runs
Benchmark #3: ./t3070-wildmatch.sh
Time (mean ± σ): 10.726 s ± 3.476 s [User: 6.790 s, System: 4.365 s]
Range (min … max): 5.444 s … 15.376 s 10 runs
Summary
'./t3070-wildmatch.sh' ran
1.16 ± 0.43 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=0 ./t3070-wildmatch.sh'
1.87 ± 0.71 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=1 ./t3070-wildmatch.sh'
Again, we get almost a 2x speedup disabling these. In this case, there
are no tests not covered by the script's "default to disable" behavior,
so the second two benchmarks should be the same (and while they do
differ, you can see the variance is quite high but they're within one
standard deviation).
So it seems like for these two scripts, at least, disabling the extra
checks is a reasonable tradeoff. Sadly, the overall runtime of "make
test" on my system doesn't get much faster. But that's because we're
mostly limited by the cost of the single biggest test. Here are the
top-5 tests by wall-clock time from a parallel run, before my patch:
57.9192368984222 t9001-send-email.sh
45.6329638957977 t0027-auto-crlf.sh
32.5278220176697 t3070-wildmatch.sh
22.2701289653778 t7610-mergetool.sh
20.8635759353638 t1701-racy-split-index.sh
And after:
57.1476998329163 t9001-send-email.sh
33.776211977005 t0027-auto-crlf.sh
21.3116669654846 t7610-mergetool.sh
20.7748689651489 t1701-racy-split-index.sh
19.6957249641418 t7112-reset-submodule.sh
We dropped 12s from t0027, and t3070 dropped off our list entirely at
around 16s. In both cases we're bound by t9001, but its slowness is
due to the actual tests, so we'll have to deal with it in a different
way. But this reduces overall CPU, and means that dealing with t9001 (by
improving the speed of send-email or splitting it apart) will let us
reduce our overall runtime even on multi-core machines.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit afda36dbf3 ("git-prompt: include sparsity state as well",
2020-06-21) added the use of some variables to control how to show
sparsity state in the git prompt, but implicitly assumed that undefined
variables would be treated as the empty string. This breaks users who
run under 'set -u'; fix the code to be more explicit.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When `git stash show --include-untracked` or
`git stash show --only-untracked` is run on a stash that doesn't include
an untracked entry, a segfault occurs. This happens because we do not
check whether the untracked entry is actually present and just attempt
to blindly dereference it.
Ensure that the untracked entry is present before actually attempting to
dereference it.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We reference the non-existent option `git stash show --show-untracked`
when we really meant `--only-untracked`. Correct the test title
accordingly.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many places in the code were doing
while ((d = readdir(dir)) != NULL) {
if (is_dot_or_dotdot(d->d_name))
continue;
...process d...
}
Introduce a readdir_skip_dot_and_dotdot() helper to make that a one-liner:
while ((d = readdir_skip_dot_and_dotdot(dir)) != NULL) {
...process d...
}
This helper particularly simplifies checks for empty directories.
Also use this helper in read_cached_dir() so that our statistics are
consistent across platforms. (In other words, read_cached_dir() should
have been using is_dot_or_dotdot() and skipping such entries, but did
not and left it to treat_path() to detect and mark such entries as
path_none.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation comment for treat_directory() was originally written
in 095952 (Teach directory traversal about subprojects, 2007-04-11)
which was before the 'struct dir_struct' split its bitfield of named
options into a 'flags' enum in 7c4c97c0 (Turn the flags in struct
dir_struct into a single variable, 2009-02-16). When those flags
changed, the comment became stale, since members like
'show_other_directories' transitioned into flags like
DIR_SHOW_OTHER_DIRECTORIES.
Update the comments for treat_directory() to use these flag names rather
than the old member names.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A directory that is untracked does not imply that all files under it
should be categorized as untracked; in particular, if the caller is
interested in ignored files, many files or directories underneath the
untracked directory may be ignored. We previously partially handled
this right with DIR_SHOW_IGNORED_TOO, but missed DIR_SHOW_IGNORED. It
was not obvious, though, because the logic for untracked and excluded
files had been fused together making it harder to reason about. The
previous commit split that logic out, making it easier to notice that
DIR_SHOW_IGNORED was missing. Add it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The show_other_directories case in treat_directory() tried to handle
both excludes and untracked files with the same logic, and mishandled
both the excludes and the untracked files in the process, in different
ways. Split that logic apart, and then focus on the logic for the
excludes; a subsequent commit will address the logic for untracked
files.
For show_other_directories, an excluded directory means that
every path underneath that directory will also be excluded. Given that
the calling code requested to just show directories when everything
under a directory had the same state (that's what the
"DIR_SHOW_OTHER_DIRECTORIES" flag means), we generally do not need to
traverse into such directories and can just immediately mark them as
ignored (i.e. as path_excluded). The only reason we cannot just
immediately return path_excluded is the DIR_HIDE_EMPTY_DIRECTORIES flag
and the possibility that the ignored directory is an empty directory.
The code previously treated DIR_SHOW_IGNORED_TOO in most cases as an
exception as well, which was wrong. It can sometimes reduce the number
of cases where we need to recurse (namely if
DIR_SHOW_IGNORED_TOO_MODE_MATCHING is also set), but should not be able
to increase the number of cases where we need to recurse. Fix the logic
accordingly.
Some sidenotes about possible confusion with dir.c:
* "ignored" often refers to an untracked ignore", i.e. a file which is
not tracked which matches one of the ignore/exclusion rules. But you
can also have a "tracked ignore", a tracked file that happens to match
one of the ignore/exclusion rules and which dir.c has to worry about
since "git ls-files -c -i" is supposed to list them.
* The dir code often uses "ignored" and "excluded" interchangeably,
which you need to keep in mind while reading the code.
* "exclude" is used multiple ways in the code:
* As noted above, "exclude" is often a synonym for "ignored".
* The logic for parsing .gitignore files was re-used in
.git/info/sparse-checkout, except there it is used to mark paths that
the user wants to *keep*. This was mostly addressed by commit
65edd96aec ("treewide: rename 'exclude' methods to 'pattern'",
2019-09-03), but every once in a while you'll find a comment about
"exclude" referring to these patterns that might in fact be in use
by the sparse-checkout machinery for inclusion rules.
* The word "EXCLUDE" is also used for pathspec negation, as in
(pathspec->items[3].magic & PATHSPEC_EXCLUDE)
Thus if a user had a .gitignore file containing
*~
*.log
!settings.log
And then ran
git add -- 'settings.*' ':^settings.log'
Then :^settings.log is a pathspec negation making settings.log not
be requested to be added even though all other settings.* files are
being added. Also, !settings.log in the gitignore file is a negative
exclude pattern meaning that settings.log is normally a file we
want to track even though all other *.log files are ignored.
Sometimes it feels like dir.c needs its own glossary with its many
definitions, including the multiply-defined terms.
Reported-by: Jason Gore <Jason.Gore@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the last commit, we added a testcase showing that the directory
traversal machinery sometimes traverses into directories unnecessarily.
Here we show that there are cases where it does the opposite: it does
not traverse into directories, despite those directories having
important files that need to be flagged.
Add a testcase showing that `git ls-files -o -i --directory` can omit
some of the files it should be listing, and another showing that `git
clean -fX` can fail to clean out some of the expected files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The PNPM package manager is apparently creating deeply nested (but
ignored) directory structures; traversing them is costly
performance-wise, unnecessary, and in some cases is even throwing
warnings/errors because the paths are too long to handle on various
platforms. Add a testcase that checks for such unnecessary directory
traversal.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
ls-files --ignored can be used together with either --others or
--cached. After being perplexed for a bit and digging in to the code, I
assumed that ls-files -i was just broken and not printing anything and
I had a nice patch ready to submit when I finally realized that -i can be
used with --cached to find tracked ignores.
While that was a mistake on my part, and a careful reading of the
documentation could have made this more clear, I suspect this is an
error others are likely to make as well. In fact, of two uses in our
testsuite, I believe one of the two did make this error. In t1306.13,
there are NO tracked files, and all the excludes built up and used in
that test and in previous tests thus have to be about untracked files.
However, since they were looking for an empty result, the mistake went
unnoticed as their erroneous command also just happened to give an empty
answer.
-i will most the time be used with -o, which would suggest we could just
make -i imply -o in the absence of either a -o or -c, but that would be
a backward incompatible break. Instead, let's just flag -i without
either a -o or -c as an error, and update the two relevant testcases to
specify their intent.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Provide more statistics in trace2 output that include the number of
directories and total paths visited by the directory traversal logic.
Subsequent patches will take advantage of this to ensure we do not
unnecessarily traverse into ignored directories.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Louis Sautier <sautier.louis@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 07d90eadb50 (Makefile: add Perl runtime prefix support,
2018-04-10) PERL_DEFINES has been a simply-expanded variable, let's
make it recursively expanded instead.
This change doesn't matter for the correctness of the logic. Whether
we used simply-expanded or recursively expanded didn't change what we
wrote out in GIT-PERL-DEFINES, but being consistent with other rules
makes this easier to understand.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The remote-https process needs to update it's own instance of
`the_repository' when it sees an HTTP(S) remote is using sha256.
Without this, parse_oid_hex() fails to handle sha256 OIDs when
it's eventually called by parse_fetch().
Tested with:
git clone https://yhbt.net/sha256test.git
GIT_SMART_HTTP=0 git clone https://yhbt.net/sha256test.git
(plain http:// also works)
Cloning the URL via git:// required no changes
Signed-off-by: Eric Wong <e@80x24.org>
Acked-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
