| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In an earlier commit, a bug was described where it's possible for Git to
produce non-murmur3 hashes when the platform's "char" type is signed,
and there are paths with characters whose highest bit is set (i.e. all
characters >= 0x80).
That patch allows the caller to control which version of Bloom filters
are read and written. However, even on platforms with a signed "char"
type, it is possible to reuse existing Bloom filters if and only if
there are no changed paths in any commit's first parent tree-diff whose
characters have their highest bit set.
When this is the case, we can reuse the existing filter without having
to compute a new one. This is done by marking trees which are known to
have (or not have) any such paths. When a commit's root tree is verified
to not have any such paths, we mark it as such and declare that the
commit's Bloom filter is reusable.
Note that this heuristic only goes in one direction. If neither a commit
nor its first parent have any paths in their trees with non-ASCII
characters, then we know for certain that a path with non-ASCII
characters will not appear in a tree-diff against that commit's first
parent. The reverse isn't necessarily true: just because the tree-diff
doesn't contain any such paths does not imply that no such paths exist
in either tree.
So we end up recomputing some Bloom filters that we don't strictly have
to (i.e. their bits are the same no matter which version of murmur3 we
use). But culling these out is impossible, since we'd have to perform
the full tree-diff, which is the same effort as computing the Bloom
filter from scratch.
But because we can cache our results in each tree's flag bits, we can
often avoid recomputing many filters, thereby reducing the time it takes
to run
$ git commit-graph write --changed-paths --reachable
when upgrading from v1 to v2 Bloom filters.
To benchmark this, let's generate a commit-graph in linux.git with v1
changed-paths in generation order[^1]:
$ git clone git@github.com:torvalds/linux.git
$ cd linux
$ git commit-graph write --reachable --changed-paths
$ graph=".git/objects/info/commit-graph"
$ mv $graph{,.bak}
Then let's time how long it takes to go from v1 to v2 filters (with and
without the upgrade path enabled), resetting the state of the
commit-graph each time:
$ git config commitGraph.changedPathsVersion 2
$ hyperfine -p 'cp -f $graph.bak $graph' -L v 0,1 \
'GIT_TEST_UPGRADE_BLOOM_FILTERS={v} git.compile commit-graph write --reachable --changed-paths'
On linux.git (where there aren't any non-ASCII paths), the timings
indicate that this patch represents a speed-up over recomputing all
Bloom filters from scratch:
Benchmark 1: GIT_TEST_UPGRADE_BLOOM_FILTERS=0 git.compile commit-graph write --reachable --changed-paths
Time (mean ± σ): 124.873 s ± 0.316 s [User: 124.081 s, System: 0.643 s]
Range (min … max): 124.621 s … 125.227 s 3 runs
Benchmark 2: GIT_TEST_UPGRADE_BLOOM_FILTERS=1 git.compile commit-graph write --reachable --changed-paths
Time (mean ± σ): 79.271 s ± 0.163 s [User: 74.611 s, System: 4.521 s]
Range (min … max): 79.112 s … 79.437 s 3 runs
Summary
'GIT_TEST_UPGRADE_BLOOM_FILTERS=1 git.compile commit-graph write --reachable --changed-paths' ran
1.58 ± 0.01 times faster than 'GIT_TEST_UPGRADE_BLOOM_FILTERS=0 git.compile commit-graph write --reachable --changed-paths'
On git.git, we do have some non-ASCII paths, giving us a more modest
improvement from 4.163 seconds to 3.348 seconds, for a 1.24x speed-up.
On my machine, the stats for git.git are:
- 8,285 Bloom filters computed from scratch
- 10 Bloom filters generated as empty
- 4 Bloom filters generated as truncated due to too many changed paths
- 65,114 Bloom filters were reused when transitioning from v1 to v2.
[^1]: Note that this is is important, since `--stdin-packs` or
`--stdin-commits` orders commits in the commit-graph by their pack
position (with `--stdin-packs`) or in the raw input (with
`--stdin-commits`).
Since we compute Bloom filters in the same order that commits appear
in the graph, we must see a commit's (first) parent before we process
the commit itself. This is only guaranteed to happen when sorting
commits by their generation number.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Bit position 23 is one column too far to the left.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The murmur3 implementation in bloom.c has a bug when converting series
of 4 bytes into network-order integers when char is signed (which is
controllable by a compiler option, and the default signedness of char is
platform-specific). When a string contains characters with the high bit
set, this bug causes results that, although internally consistent within
Git, does not accord with other implementations of murmur3 (thus,
the changed path filters wouldn't be readable by other off-the-shelf
implementatios of murmur3) and even with Git binaries that were compiled
with different signedness of char. This bug affects both how Git writes
changed path filters to disk and how Git interprets changed path filters
on disk.
Therefore, introduce a new version (2) of changed path filters that
corrects this problem. The existing version (1) is still supported and
is still the default, but users should migrate away from it as soon
as possible.
Because this bug only manifests with characters that have the high bit
set, it may be possible that some (or all) commits in a given repo would
have the same changed path filter both before and after this fix is
applied. However, in order to determine whether this is the case, the
changed paths would first have to be computed, at which point it is not
much more expensive to just compute a new changed path filter.
So this patch does not include any mechanism to "salvage" changed path
filters from repositories. There is also no "mixed" mode - for each
invocation of Git, reading and writing changed path filters are done
with the same version number; this version number may be explicitly
stated (typically if the user knows which version they need) or
automatically determined from the version of the existing changed path
filters in the repository.
There is a change in write_commit_graph(). graph_read_bloom_data()
makes it possible for chunk_bloom_data to be non-NULL but
bloom_filter_settings to be NULL, which causes a segfault later on. I
produced such a segfault while developing this patch, but couldn't find
a way to reproduce it neither after this complete patch (or before),
but in any case it seemed like a good thing to include that might help
future patch authors.
The value in t0095 was obtained from another murmur3 implementation
using the following Go source code:
package main
import "fmt"
import "github.com/spaolacci/murmur3"
func main() {
fmt.Printf("%x\n", murmur3.Sum32([]byte("Hello world!")))
fmt.Printf("%x\n", murmur3.Sum32([]byte{0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff}))
}
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In an earlier commit, we began ignoring the Bloom data ("BDAT") chunk
for commit-graphs whose Bloom filters were computed using a hash version
incompatible with the value of `commitGraph.changedPathVersion`.
Now that the Bloom API has been hardened to discard these incompatible
filters (with the exception of low-level APIs), we can safely load these
Bloom filters unconditionally.
We no longer want to return early from `graph_read_bloom_data()`, and
similarly do not want to set the bloom_settings' `hash_version` field as
a side-effect. The latter is because we want to wait until we know which
Bloom settings we're using (either the defaults, from the GIT_TEST
variables, or from the previous commit-graph layer) before deciding what
hash_version to use.
If we detect an existing BDAT chunk, we'll infer the rest of the
settings (e.g., number of hashes, bits per entry, and maximum number of
changed paths) from the earlier graph layer. The hash_version will be
inferred from the previous layer as well, unless one has already been
specified via configuration.
Once all of that is done, we normalize the value of the hash_version to
either "1" or "2".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Callers use the inline `get_bloom_filter()` implementation as a thin
wrapper around `get_or_compute_bloom_filter()`. The former calls the
latter with a value of "0" for `compute_if_not_present`, making
`get_bloom_filter()` the default read-only path for fetching an existing
Bloom filter.
Callers expect the value returned from `get_bloom_filter()` is usable,
that is that it's compatible with the configured value corresponding to
`commitGraph.changedPathsVersion`.
This is OK, since the commit-graph machinery only initializes its BDAT
chunk (thereby enabling it to service Bloom filter queries) when the
Bloom filter hash_version is compatible with our settings. So any value
returned by `get_bloom_filter()` is trivially useable.
However, subsequent commits will load the BDAT chunk even when the Bloom
filters are built with incompatible hash versions. Prepare to handle
this by teaching `get_bloom_filter()` to discard filters that are
incompatible with the configured hash version.
Callers who wish to read incompatible filters (e.g., for upgrading
filters from v1 to v2) may use the lower level routine,
`get_or_compute_bloom_filter()`.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In subsequent commits, we will want to load existing Bloom filters out
of a commit-graph, even when the hash version they were computed with
does not match the value of `commitGraph.changedPathVersion`.
In order to differentiate between the two, add a "version" field to each
Bloom filter.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A subsequent commit will introduce another version of the changed-path
filter in the commit graph file. In order to control which version to
write (and read), a config variable is needed.
Therefore, introduce this config variable. For forwards compatibility,
teach Git to not read commit graphs when the config variable
is set to an unsupported version. Because we teach Git this,
commitgraph.readChangedPaths is now redundant, so deprecate it and
define its behavior in terms of the config variable we introduce.
This commit does not change the behavior of writing (Git writes changed
path filters when explicitly instructed regardless of any config
variable), but a subsequent commit will restrict Git such that it will
only write when commitgraph.changedPathsVersion is a recognized value.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Subsequent commits will teach Git another version of changed path
filter that has different behavior with paths that contain at least
one character with its high bit set, so test the existing behavior as
a baseline.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Implement a mode of the "read-graph" test helper to dump out the
hexadecimal contents of the Bloom filter(s) contained in a commit-graph.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prepare for a future commit to use the load_bloom_filter_from_graph()
function directly to load specific Bloom filters out of the commit-graph
for manual inspection (to be used during tests).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prepare for the 'read-graph' test helper to perform other tasks besides
dumping high-level information about the commit-graph by extracting its
main routine into a separate function.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code change to Git to support version 2 will be done in subsequent
commits.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The changed-path Bloom filter mechanism is parameterized by a couple of
variables, notably the number of bits per hash (typically "m" in Bloom
filter literature) and the number of hashes themselves (typically "k").
It is critically important that filters are read with the Bloom filter
settings that they were written with. Failing to do so would mean that
each query is liable to compute different fingerprints, meaning that the
filter itself could return a false negative. This goes against a basic
assumption of using Bloom filters (that they may return false positives,
but never false negatives) and can lead to incorrect results.
We have some existing logic to carry forward existing Bloom filter
settings from one layer to the next. In `write_commit_graph()`, we have
something like:
if (!(flags & COMMIT_GRAPH_NO_WRITE_BLOOM_FILTERS)) {
struct commit_graph *g = ctx->r->objects->commit_graph;
/* We have changed-paths already. Keep them in the next graph */
if (g && g->chunk_bloom_data) {
ctx->changed_paths = 1;
ctx->bloom_settings = g->bloom_filter_settings;
}
}
, which drags forward Bloom filter settings across adjacent layers.
This doesn't quite address all cases, however, since it is possible for
intermediate layers to contain no Bloom filters at all. For example,
suppose we have two layers in a commit-graph chain, say, {G1, G2}. If G1
contains Bloom filters, but G2 doesn't, a new G3 (whose base graph is
G2) may be written with arbitrary Bloom filter settings, because we only
check the immediately adjacent layer's settings for compatibility.
This behavior has existed since the introduction of changed-path Bloom
filters. But in practice, this is not such a big deal, since the only
way up until this point to modify the Bloom filter settings at write
time is with the undocumented environment variables:
- GIT_TEST_BLOOM_SETTINGS_BITS_PER_ENTRY
- GIT_TEST_BLOOM_SETTINGS_NUM_HASHES
- GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS
(it is still possible to tweak MAX_CHANGED_PATHS between layers, but
this does not affect reads, so is allowed to differ across multiple
graph layers).
But in future commits, we will introduce another parameter to change the
hash algorithm used to compute Bloom fingerprints itself. This will be
exposed via a configuration setting, making this foot-gun easier to use.
To prevent this potential issue, validate that all layers of a split
commit-graph have compatible settings with the newest layer which
contains Bloom filters.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Original-test-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commit-graph stores changed-path Bloom filters which represent the
set of paths included in a tree-level diff between a commit's root tree
and that of its parent.
When a commit has no parents, the tree-diff is computed against that
commit's root tree and the empty tree. In other words, every path in
that commit's tree is stored in the Bloom filter (since they all appear
in the diff).
Consult these filters during pathspec-limited traversals in the function
`rev_same_tree_as_empty()`. Doing so yields a performance improvement
where we can avoid enumerating the full set of paths in a parentless
commit's root tree when we know that the path(s) of interest were not
listed in that commit's changed-path Bloom filter.
Suggested-by: SZEDER Gábor <szeder.dev@gmail.com>
Original-patch-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing implementation of test_bloom_filters_not_used() asserts
that the Bloom filter sub-system has not been initialized at all, by
checking for the absence of any data from it from trace2.
In the following commit, it will become possible to load Bloom filters
without using them (e.g., because the `commitGraph.changedPathVersion`
introduced later in this series is incompatible with the hash version
with which the commit-graph's Bloom filters were written).
When this is the case, it's possible to initialize the Bloom filter
sub-system, while still not using any Bloom filters. When this is the
case, check that the data dump from the Bloom sub-system is all zeros,
indicating that no filters were used.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When trying to execute a non-existent program from GIT_PAGER, we display
an error. However, we also send the complete text to the terminal
and return a successful exit code. This can be confusing for the user
and the displayed error could easily become obscured by a lengthy
text.
For example, here the error message would be very far above after
sending 50 MB of text:
$ GIT_PAGER=non-existent t/test-terminal.perl git log | wc -c
error: cannot run non-existent: No such file or directory
50314363
Let's make the error clear by aborting the process and return an error
so that the user can easily correct their mistake.
This will be the result of the change:
$ GIT_PAGER=non-existent t/test-terminal.perl git log | wc -c
error: cannot run non-existent: No such file or directory
fatal: unable to execute pager 'non-existent'
0
The behavior change we're introducing in this commit affects two tests
in t7006, which is a good sign regarding test coverage and requires us
to address it.
The first test is 'git skips paging non-existing command'. This test
comes from f7991f01f2 (t7006: clean up SIGPIPE handling in trace2 tests,
2021-11-21,) where a modification was made to a test that was originally
introduced in c24b7f6736 (pager: test for exit code with and without
SIGPIPE, 2021-02-02). That original test was, IMHO, in the same
direction we're going in this commit.
At any rate, this test obviously needs to be adjusted to check the new
behavior we are introducing. Do it.
The second test being affected is: 'non-existent pager doesnt cause
crash', introduced in f917f57f40 (pager: fix crash when pager program
doesn't exist, 2021-11-24). As its name states, it has the intention of
checking that we don't introduce a regression that produces a crash when
GIT_PAGER points to a nonexistent program.
This test could be considered redundant nowadays, due to us already
having several tests checking implicitly what a non-existent command in
GIT_PAGER produces. However, let's maintain a good belt-and-suspenders
strategy; adapt it to the new world.
Finally, it's worth noting that we are not changing the behavior if the
command specified in GIT_PAGER is a shell command. In such cases, it
is:
$ GIT_PAGER=:\;non-existent t/test-terminal.perl git log
:;non-existent: 1: non-existent: not found
died of signal 13 at t/test-terminal.perl line 33.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The eol attribute only accepts "crlf" and "lf",
but the example incorrectly capitalizes "crlf".
References:
- https://git-scm.com/docs/gitattributes#_eol
- https://github.com/git/git/blob/v2.45.2/convert.c#L1278
Signed-off-by: Shane Sun <github@waterlemons2k.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clarification to avoid an appearance of using an uninitialized
variable.
* kl/attr-read-attr-fromindex-msan-workaround:
attr: fix msan issue in read_attr_from_index
|
|
Code cleanup.
* jc/worktree-git-path:
worktree_git_path(): move the declaration to path.h
|
|
"git update-server-info" and "git commit-graph --write" have been
updated to use the tempfile API to avoid leaving cruft after
failing.
* tb/commit-graph-use-tempfile:
server-info.c: remove temporary info files on exit
commit-graph.c: remove temporary graph layers on exit
|
|
For over a year, setting add.interactive.useBuiltin configuration
variable did nothing but giving a "this does not do anything"
warning. Finally remove it.
* jc/add-i-retire-usebuiltin-config:
add-i: finally retire add.interactive.useBuiltin
|
|
Earlier we stopped using the tree of HEAD as the default source of
attributes in a bare repository, but failed to document it. This
has been corrected.
* jc/no-default-attr-tree-in-bare:
attr.tree: HEAD:.gitattributes is no longer the default in a bare repo
|
|
We forgot to normalize the result of getcwd() to NFC on macOS where
all other paths are normalized, which has been corrected. This still
does not address the case where core.precomposeUnicode configuration
is not defined globally.
* tb/precompose-getcwd:
macOS: ls-files path fails if path of workdir is NFD
|
|
The pseudo-merge reachability bitmap to help more efficient storage
of the reachability bitmap in a repository with too many refs has
been added.
* tb/pseudo-merge-reachability-bitmap: (26 commits)
pack-bitmap.c: ensure pseudo-merge offset reads are bounded
Documentation/technical/bitmap-format.txt: add missing position table
t/perf: implement performance tests for pseudo-merge bitmaps
pseudo-merge: implement support for finding existing merges
ewah: `bitmap_equals_ewah()`
pack-bitmap: extra trace2 information
pack-bitmap.c: use pseudo-merges during traversal
t/test-lib-functions.sh: support `--notick` in `test_commit_bulk()`
pack-bitmap: implement test helpers for pseudo-merge
ewah: implement `ewah_bitmap_popcount()`
pseudo-merge: implement support for reading pseudo-merge commits
pack-bitmap.c: read pseudo-merge extension
pseudo-merge: scaffolding for reads
pack-bitmap: extract `read_bitmap()` function
pack-bitmap-write.c: write pseudo-merge table
pseudo-merge: implement support for selecting pseudo-merge commits
config: introduce `git_config_double()`
pack-bitmap: make `bitmap_writer_push_bitmapped_commit()` public
pack-bitmap: implement `bitmap_writer_has_bitmapped_object_id()`
pack-bitmap-write: support storing pseudo-merge commits
...
|
|
We ignore the option --color-moved if an external diff program is
configured, presumably because its overhead is unnecessary in that case.
Respect the option if we don't actually use the external diff, though.
Reported-by: lolligerhans@gmx.de
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I'm not sure exactly how to trigger the leak, but it seems fairly
obvious that the `content' buffer should be freed even if
convert_object_file() fails. Noticed while working in this area
on unrelated things.
Signed-off-by: Eric Wong <e@80x24.org>
Acked-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* pk/swedish-translation:
git-gui: sv.po: Update Swedish translation (576t0f0u)
|
|
* bc/french-translation:
git-gui: po: fix typo in French "aperçu"
|
|
The "fuzz smoke test" job compiles various .o files to create
libgit.a and others, but the final build product of the fuzzer build
is *not* "git". Since the job is not interested in building a
working "git", it does not define any build flags, and among the
notable ones that are missing is NO_CURL---even though the CI
environment that runs the job does not have libcURL development
package installed.
This obviously leads to a build failure.
Pass NO_CURL=NoThanks to "make" to make sure things will build
correctly, if we add any conditional compilation with "#ifdef
NO_CURL ... #endif" in the codebase.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Show ZLIB_VERSION, if defined, in "git version --build-options"
output.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Show LIBCURL_VERSION, if defined, in "git version --build-options"
output.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "--heads" option of "ls-remote" and "show-ref" has been been
deprecated; "--branches" replaces "--heads".
* jc/heads-are-branches:
show-ref: introduce --branches and deprecate --heads
ls-remote: introduce --branches and deprecate --heads
refs: call branches branches
|
|
The structure of the document that records longer-term project
decisions to deprecate/remove/update various behaviour has been
outlined.
* ps/document-breaking-changes:
BreakingChanges: document that we do not plan to deprecate git-checkout
BreakingChanges: document removal of grafting
BreakingChanges: document upcoming change from "sha1" to "sha256"
docs: introduce document to announce breaking changes
|
|
When the user adds to "git rebase -i" instruction to "pick" a merge
commit, the error experience is not pleasant. Such an error is now
caught earlier in the process that parses the todo list.
* pw/rebase-i-error-message:
rebase -i: improve error message when picking merge
rebase -i: pass struct replay_opts to parse_insn_line()
|
|
Fix for a progress bar.
* ds/ahead-behind-fix:
commit-graph: increment progress indicator
|
|
Setting core.abbrev too early before the repository set-up
(typically in "git clone") caused segfault, which as been
corrected.
* ps/abbrev-length-before-setup-fix:
object-name: don't try to abbreviate to lengths greater than hexsz
parse-options-cb: stop clamping "--abbrev=" to hash length
config: fix segfault when parsing "core.abbrev" without repo
|
|
"git format-patch --interdiff" for multi-patch series learned to
turn on cover letters automatically (unless told never to enable
cover letter with "--no-cover-letter" and such).
* rj/format-patch-auto-cover-with-interdiff:
format-patch: assume --cover-letter for diff in multi-patch series
t4014: cleanups in a few tests
|
|
"git update-ref --stdin" learned to handle transactional updates of
symbolic-refs.
* kn/update-ref-symref:
update-ref: add support for 'symref-update' command
reftable: pick either 'oid' or 'target' for new updates
update-ref: add support for 'symref-create' command
update-ref: add support for 'symref-delete' command
update-ref: add support for 'symref-verify' command
refs: specify error for regular refs with `old_target`
refs: create and use `ref_update_expects_existing_old_ref()`
|
|
"oidtree" tests were rewritten to use the unit test framework.
* gt/unit-test-oidtree:
t/: migrate helper/test-oidtree.c to unit-tests/t-oidtree.c
|
|
Assorted fixes to multi-pack-index code paths.
* tb/multi-pack-reuse-fix:
pack-revindex.c: guard against out-of-bounds pack lookups
pack-bitmap.c: avoid uninitialized `pack_int_id` during reuse
midx-write.c: do not read existing MIDX with `packs_to_include`
|
|
To help developers, the build procedure now allows builders to use
CFLAGS_APPEND to specify additional CFLAGS.
* ps/make-append-to-cflags:
Makefile: add ability to append to CFLAGS and LDFLAGS
|
|
"git diff --exit-code --ext-diff" learned to take the exit status
of the external diff driver into account when deciding the exit
status of the overall "git diff" invocation when configured to do
so.
* rs/diff-exit-code-with-external-diff:
diff: let external diffs report that changes are uninteresting
userdiff: add and use struct external_diff
t4020: test exit code with external diffs
|
|
Doc update.
* ds/doc-add-interactive-singlekey:
doc: interactive.singleKey is disabled by default
|
|
This change uses the OpenSSL supplied OPENSSL_VERSION_TEXT #define supplied
for this purpose by that project. If the #define is not present, the version
is not reported.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
cfc5cf428b (receive-pack.c: consolidate find header logic, 2022-01-06)
introduced find_header_mem() and turned find_commit_header() into a thin
wrapper. Since then, the latter has become the last remaining caller of
the former. Remove it to restore find_commit_header() to the state
before cfc5cf428b, get rid of a strlen(3) call and resolve a NEEDSWORK
note in the process.
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The end of t5500 contains two tests which use a single helper function,
fetch_filter_blob_limit_zero(). It takes a parameter to point to the
path of the server repository, which we store locally as $SERVER. The
first caller uses the relative path "server", while the second points
into the httpd document root.
Commit 07ef3c6604 (fetch test: use more robust test for filtered
objects, 2019-12-23) refactored some lines, but accidentally switched
"$SERVER" to "server" in one spot. That means the second caller is
looking at the server directory from the previous test rather than its
own.
This happens to work out because the "server" directory from the first
test is still hanging around, and the contents of the two are identical.
But it was clearly not the intended behavior, and is fragile to cleaning
up the leftovers from the first test.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 08809c09aa13 (mingw: add a helper function to attach GDB to the
current process, 2020-02-13), I added a declaration that was not needed.
Back then, that did not matter, but now that the declaration of that
symbol was changed in mingw-w64's headers, it causes the following
compile error:
CC compat/mingw.o
compat/mingw.c: In function 'open_in_gdb':
compat/mingw.c:35:9: error: function declaration isn't a prototype [-Werror=strict-prototypes]
35 | extern char *_pgmptr;
| ^~~~~~
In file included from C:/git-sdk-64/usr/src/git/build-installers/mingw64/lib/gcc/x86_64-w64-mingw32/14.1.0/include/mm_malloc.h:27,
from C:/git-sdk-64/usr/src/git/build-installers/mingw64/lib/gcc/x86_64-w64-mingw32/14.1.0/include/xmmintrin.h:34,
from C:/git-sdk-64/usr/src/git/build-installers/mingw64/lib/gcc/x86_64-w64-mingw32/14.1.0/include/immintrin.h:31,
from C:/git-sdk-64/usr/src/git/build-installers/mingw64/lib/gcc/x86_64-w64-mingw32/14.1.0/include/x86intrin.h:32,
from C:/git-sdk-64/usr/src/git/build-installers/mingw64/include/winnt.h:1658,
from C:/git-sdk-64/usr/src/git/build-installers/mingw64/include/minwindef.h:163,
from C:/git-sdk-64/usr/src/git/build-installers/mingw64/include/windef.h:9,
from C:/git-sdk-64/usr/src/git/build-installers/mingw64/include/windows.h:69,
from C:/git-sdk-64/usr/src/git/build-installers/mingw64/include/winsock2.h:23,
from compat/../git-compat-util.h:215,
from compat/mingw.c:1:
compat/mingw.c:35:22: error: '__p__pgmptr' redeclared without dllimport attribute: previous dllimport ignored [-Werror=attributes]
35 | extern char *_pgmptr;
| ^~~~~~~
Let's just drop the declaration and get rid of this compile error.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fetch-pack internals have multiple options related to creating
".keep" lock-files for the received pack:
- if args.lock_pack is set, then we tell index-pack to create a .keep
file. In the fetch-pack plumbing command, this is triggered by
passing "-k" twice.
- if the caller passes in a pack_lockfiles string list, then we use it
to record the path of the keep-file created by index-pack. We get
that name by reading the stdout of index-pack. In the fetch-pack
command, this is triggered by passing the (undocumented) --lock-pack
option; without it, we pass in a NULL string list.
So it's possible to ask index-pack to create the lock-file (using "-k
-k") but not ask to record it (by avoiding "--lock-pack"). This worked
fine until 5476e1efde (fetch-pack: print and use dangling .gitmodules,
2021-02-22), but now it causes a segfault.
Before that commit, if pack_lockfiles was NULL, we wouldn't bother
reading the output from index-pack at all. But since that commit,
index-pack may produce extra output if we asked it to fsck. So even if
nobody cares about the lockfile path, we still need to read it to skip
to the output we do care about.
We correctly check that we didn't get a NULL lockfile path (which can
happen if we did not ask it to create a .keep file at all), but we
missed the case where the lockfile path is not NULL (due to "-k -k") but
the pack_lockfiles string_list is NULL (because nobody passed
"--lock-pack"), and segfault trying to add to the NULL string-list.
We can fix this by skipping the append to the string list when either
the value or the list is NULL. In that case we must also free the
lockfile path to avoid leaking it when it's non-NULL.
Nobody noticed the bug for so long because the transport code used by
"git fetch" always passes in a pack_lockfiles pointer, and remote-curl
(the main user of the fetch-pack plumbing command) always passes
--lock-pack.
Reported-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
