| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In t7528 we spawn an SSH agent to verify that we can sign a commit via
it. This test has started to fail on some machines:
+++ ssh-agent
unix_listener_tmp: path "/home/pks/Development/git/build/test-output/trash directory.t7528-signed-commit-ssh/.ssh/agent/s.UTulegefEg.agent.UrPHumMXPq" too long for Unix domain socket
main: Couldn't prepare agent socket
As it turns out this is caused by a change in OpenSSH 10.1 [1]:
* ssh-agent(1), sshd(8): move agent listener sockets from /tmp to
under ~/.ssh/agent for both ssh-agent(1) and forwarded sockets
in sshd(8).
Instead of creating the socket in "/tmp", OpenSSH now creates the socket
in our home directory. And as the home directory gets modified to be
located in our test output directory we end up with paths that are
somewhat long. But Linux has a rather short limit of 108 characters for
socket paths, and other systems have even lower limits, so it is very
easy now to exceed the limit and run into the above error.
Work around the issue by using `ssh-agent -T`, which instructs it to
use the old behaviour and create the socket in "/tmp" again. This switch
has only been introduced with 10.1 though, so for older versions we have
to fall back to not using it. That's fine though, as older versions know
to put the socket into "/tmp" already.
An alternative approach would be to abbreviate the socket name itself so
that we create it as e.g. "sshsock" in the trash directory. But taking
the above example we'd still end up with a path that is 91 characters
long. So we wouldn't really have a lot of headroom, and it is quite
likely that some developers would see the issue on their machines.
[1]: https://www.openssh.com/txt/release-10.1
Reported-by: Xi Ruoyao <xry111@xry111.site>
Suggested-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Lauri Tirkkonen <lauri@hacktheplanet.fi>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In get_default_ssh_signing_key(), the default ssh signing key is
retrieved in `key_stdout` buf, which is then split using
strbuf_split_max() into up to two strbufs at a new line and the first
strbuf is returned as a `char *`and not a strbuf.
This makes the function lack the use of strbuf API as no edits are
performed on the split tokens.
Simplify the process of retrieving and returning the desired line by
using strchr() to isolate the line and xmemdupz() to return a copy of the
line. This removes the roundabout way of splitting the string into
strbufs, just to return the line.
Reported-by: Junio Hamano <gitster@pobox.com>
Helped-by: Christian Couder <christian.couder@gmail.com>
Helped-by: Kristoffer Haugsbakk <kristofferhaugsbakk@fastmail.com>
Signed-off-by: Olamide Caleb Bello <belkid98@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In get_ssh_finger_print(), the output of the `ssh-keygen` command is
put into `fingerprint_stdout` strbuf. The string in `fingerprint_stdout`
is then split into up to 3 strbufs using strbuf_split_max(). However they
are not modified after the split thereby not making use of the strbuf API
as the fingerprint token is merely returned as a char * and not a strbuf.
Hence they do not need to be strbufs.
Simplify the process of retrieving and returning the desired token by
using strchr() to isolate the token and xmemdupz() to return a copy of the
token. This removes the roundabout way of splitting the string into
strbufs just to return the token.
Reported-by: Junio Hamano <gitster@pobox.com>
Helped-by: Christian Couder <christian.couder@gmail.com>
Helped-by: Kristoffer Haugsbakk <kristofferhaugsbakk@fastmail.com>
Signed-off-by: Olamide Caleb Bello <belkid98@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier, b55e6d36 (diff: ensure consistent diff behavior with
ignore options, 2025-08-08) introduced "dry-run" mode to the
diff machinery so that content-based diff filtering (like
ignoring space changes or those that match -I<regex>) can first
try to produce a patch without emitting any output to see if
under the given diff filtering condition we would get any output
lines, and a new helper function diff_flush_patch_quietly() was
introduced to use the mode to see an individual filepair needs
to be shown.
However, the solution was not complete. When files are deleted,
file modes change, or there are unmerged entries in the index,
dry-run mode still produces output because we overlooked these
conditions, and as a result, dry-run mode was not quiet.
To fix this, return early in emit_diff_symbol_from_struct() if
we are in dry-run mode. This function will be called by all the
emit functions to output the results. Returning early can avoid
diff output when files are deleted or file modes are changed.
Stop print message in dry-run mode if we have unmerged entries
in index. Discard output of external diff tool in dry-run mode.
Signed-off-by: Lidong Yan <yldhome2d2@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier, we added is a protection for the loop that computes "git
diff --quiet -w" to ensure calls to the diff_flush_patch_quietly()
helper stays quiet. Do the same for another loop that deals with
options like "--name-status" to make calls to the same helper.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As documented in git-bisect(1), `git bisect help` should display usage
information. However, since the migration of `git bisect` to a full
builtin command in 73fce29427 (Turn `git bisect` into a full built-in,
2022-11-10), this behavior was broken. Running `git bisect help` would,
instead of showing usage, either fail silently if already in a bisect
session, or otherwise trigger an interactive autostart prompt asking "Do
you want me to do it for you [Y/n]?".
Similarly, since df63421be9 (bisect--helper: handle states directly,
2022-11-10), running invalid subcommands like `git bisect foobar` also
led to the same behavior.
This occurred because `help` and other unrecognized subcommands were
being unconditionally passed to `bisect_state`, which then called
`bisect_autostart`, triggering the interactive prompt.
Fix this by:
1. Adding explicit handling for the `help` subcommand to show usage;
2. Validating that unrecognized commands are actually valid state
commands before calling `bisect_state`;
3. Showing an error with usage for truly invalid commands.
This ensures that `git bisect help` displays the usage as documented,
and invalid commands fail cleanly without entering interactive mode.
Alternate terms are still handled correctly through
`check_and_set_terms`.
Signed-off-by: Ruoyu Zhong <zhongruoyu@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The changed-path Bloom filters feature has proven stable and reliable
over several years of use, delivering significant performance
improvement for file history computation in large monorepos. Currently
a user can opt-in to writing the changed-path Bloom filters using the
"--changed-paths" option to "git commit-graph write". The filters will
be persisted until the user drops the filters using the
"--no-changed-paths" option. For this functionality, refer to 0087a87ba8
(commit-graph: persist existence of changed-paths, 2020-07-01).
Large monorepos using Git's background maintenance to build and update
commit-graph files could use an easy switch to enable this feature
without a foreground computation. In this commit, we're proposing a new
config option "commitGraph.changedPaths":
* If "true", "git commit-graph write" will write Bloom filters,
equivalent to passing "--changed-paths";
* If "false" or "unset", Bloom filters will be written during "git
commit-graph write" only if the filters already exist in the current
commit-graph file. This matches the default behaviour of "git
commit-graph write" without any "--[no-]changed-paths" option. Note
"false" can disable a previous "true" config value but doesn't imply
"--no-changed-paths".
This config will always respect the precedence of command line option
"--[no-]changed-paths".
We also set this new config as optional recommended config in scalar to
turn on this feature for large repos.
Helped-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Emily Yang <emilyyang.git@gmail.com>
Acked-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using the structure subcommand for git-repo(1), evaluating a
repository may take some time depending on its shape. Add a progress
meter to provide feedback to the user about what is happening. The
progress meter is enabled by default when the command is executed from a
tty. It can also be explicitly enabled/disabled via the --[no-]progress
option.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All repository structure stats are outputted in a human-friendly table
form. This format is not suitable for machine parsing. Add a --format
option that supports three output modes: `table`, `keyvalue`, and `nul`.
The `table` mode is the default format and prints the same table output
as before.
With the `keyvalue` mode, each line of output contains a key-value pair
of a repository stat. The '=' character is used to delimit between keys
and values. The `nul` mode is similar to `keyvalue`, but key-values are
delimited by a NUL character instead of a newline. Also, instead of a
'=' character to delimit between keys and values, a newline character is
used. This allows stat values to support special characters without
having to cquote them. These two new modes provides output that is more
machine-friendly.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The amount of objects in a repository can provide insight regarding its
shape. To surface this information, use the path-walk API to count the
number of reachable objects in the repository by object type. All
regular references are used to determine the reachable set of objects.
The object counts are appended to the same table containing the
reference information.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The structure of a repository's history can have huge impacts on the
performance and health of the repository itself. Currently, Git lacks a
means to surface repository metrics regarding its structure/shape via a
single command. Acquiring this information requires users to be familiar
with the relevant data points and the various Git commands required to
surface them. To fill this gap, supplemental tools such as git-sizer(1)
have been developed.
To allow users to more readily identify repository structure related
information, introduce the "structure" subcommand in git-repo(1). The
goal of this subcommand is to eventually provide similar functionality
to git-sizer(1), but natively in Git.
The initial version of this command only iterates through all references
in the repository and tracks the count of branches, tags, remote refs,
and other reference types. The corresponding information is displayed in
a human-friendly table formatted in a very similar manner to
git-sizer(1). The width of each table column is adjusted automatically
to satisfy the requirements of the widest row contained.
Subsequent commits will surface additional relevant data points to
output and also provide other more machine-friendly output formats.
Based-on-patch-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When filtering refs, `ref_kind_from_refname()` is used to determine the
ref type. In a subsequent commit, this same logic is reused when
counting refs by type. Export the function to prepare for this change.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When setting up `struct ref_filter` for filter_refs(), the
`name_patterns` field must point to an array of pattern strings even if
no patterns are required. To improve this interface, treat a NULL
`name_patterns` field the same as when it points to an empty array.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Subcommand functions are often prefixed with `cmd_` to denote that they
are an entrypoint. Rename repo_info() to cmd_repo_info() accordingly.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Show option P in the prompt and explain it properly on a dedicated line
in online help and documentation.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unicode 17 is out. Update the unicode with table.
https://blog.unicode.org/2025/09/unicode-170-release-announcement.html
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update these Makefiles to be in line with other Makefiles from contrib
such as for contacts or subtree by making the following changes:
* Make the default settings after including config.mak.autogen and
config.mak.
* Add the missing $(CPPFLAGS) to the compiler command as well as the
missing $(CFLAGS) to the linker command.
* Use a pattern rule for compilation instead of a dedicated rule for
each compile unit.
* Get rid of $(MAIN), $(SRCS) and $(OBJS) and simply use their values
such as git-credential-libsecret and git-credential-libsecret.o.
* Strip @ from $(RM) to let the clean target rule be verbose.
* Define .PHONY for all special targets (all, clean).
Signed-off-by: Thomas Uhle <thomas.uhle@mailbox.tu-dresden.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
1. '--exclude=' option to 'git log' and 'git shortlog' are missing. Add the
option to __git_log_shortlog_options.
2. The `--committer` option in `git log` requires a pattern, such as
`--committer=ba`, but in `git shortlog`, specifying a pattern results in
an error: “error: option `committer' takes no value.” Handle them as
separate options for completion rather than a shared one.
Signed-off-by: KIYOTA Fumiya <aimluck.kiyota@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When an on-disk sparse index is expanded to a full one, it could be
due to some worktree state that requires looking at file entries
hidden within sparse tree entries. This can be avoided if the
worktree is cleaned up and some other issues related to the index
state are resolved.
Expand the advice message to include all of these cases, since 'git
sparse-checkout clean' is not currently capable of handling all
cases.
In the future, we may improve the behavior of 'git sparse-checkout
clean' to handle all of the cases.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On Windows, the MSYS layer translates absolute path names generated by
a shell script from the POSIX style /c/dir/file to the Windows style
C:/dir/file form that is understood by git.exe. This happens only when
the absolute path stands on its own as a program argument or a value of
an environment variable.
The earlier commits 749d6d166d (config: values of pathname type can be
prefixed with :(optional), 2025-09-28) and ccfcaf399f (parseopt: values
of pathname type can be prefixed with :(optional), 2025-09-28) added
test cases where ":(optional)" is inserted before an absolute path.
$PWD is used to construct the absolute paths, which gives the POSIX
form, and the result is ":(optional)/c/dir/template". Such command line
arguments are no longer recognized as absolute paths and do not undergo
translation.
Existing test cases that expect that the specified file does not exist
are not incorrect (after all, git.exe will not find /c/dir/template).
Yet, they are conceptually incorrect. That the use of $PWD is erroneous
is revealed by a test case that expects that the optional file exists.
Since no such test case is present, add one. Use "$(pwd)" to generate
the absolute paths, so that the command line arguments become
":(optional)C:/dir/template".
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running "git status -z --short", the marker on modified index
entries (e.g., "M") is colorized, but the "??" marker for untracked
entries is not. Let's fix the "??" entries to show color here.
At first glance you might think that neither should be colorized, as
usually one would use "-z" to get machine-readable output. But this is a
tricky and unusual case. We have two output formats, "--short" and
"--porcelain" which are substantially similar, but differ in that
"--short" is for humans who want something short and "--porcelain" is
for machines. And "-z" by itself, without any other output option, does
default to "--porcelain", so "git status -z" will not colorize anything.
But if you explicitly ask for "-z" and "--short" together, then that is
asking for the human-readable output, but separated by NULs. This is
unlikely to be useful directly, but could for example be used if the
output will be shown to a human outside of the terminal. At any rate,
the current behavior is clearly wrong (since we colorize some things but
not others), and I think colorizing everything is the least-surprising
thing we can do here.
Reported-by: Langbart <Langbart@protonmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In --quiet mode, since we produce only an exit code for "something was
changed" and no actual output, we can often get by with just a
tree-level diff. However, certain options require us to actually look at
the file contents (e.g., if we are ignoring whitespace changes). We have
a flag "diff_from_contents" for that, and if it is set we call
diff_flush() on each path.
To avoid producing any output (since we were asked to be --quiet), we
traditionally just redirected the output to /dev/null. That changed in
b55e6d36eb (diff: ensure consistent diff behavior with ignore options,
2025-08-08), which replaced that with a "dry_run" flag. In theory, with
dry_run set, we should produce no output. But it carries a risk of
regression: if we forget to respect dry_run in any of the output paths,
we'll accidentally produce output.
And indeed, there is at least one such regression in that commit, as it
covered only the case where we actually call into xdiff, and not
creation or deletion diffs, where we manually generate the headers. We
even test this case in t4035, but only with diff-tree, which does not
show the bug by default because it does not require diff_from_contents.
But git-diff does, because it allows external diff programs by default
(so we must dig into each diff filepair to decide if it requires running
an external diff that may declare two distinct blobs to actually be the
same).
We should fix all of those code paths to respect dry_run correctly, but
in the meantime we can protect ourselves more fully by restoring the
redirection to /dev/null. This gives us an extra layer of protection
against regressions dues to other code paths we've missed.
Though the original issue was reported with "git diff" (and due to its
default of --ext-diff), I've used "diff-tree -w" in the new test. It
triggers the same issue, but I think the fact that "-w" implies
diff_from_contents is a bit more obvious, and fits in with the rest of
t4035.
Reported-by: Jake Zimmerman <jake@zimmerman.io>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a preceding commit we have removed `packfile_store_get_packs()`. With
this function removed it's somewhat useless to still have the "all"
infix in `packfile_store_get_all_packs()`. Rename the latter to drop
that infix.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have a bunch of different sites that want to iterate through all
packs of a given `struct packfile_store`. This pattern is somewhat
verbose and repetitive, which makes it somewhat cumbersome.
Introduce a new macro `repo_for_each_pack()` that removes some of the
boilerplate.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the preceding commits we have removed all remaining callers of
`packfile_store_get_packs()`, the function is thus unused now. Remove
it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using multiple threads in git-grep(1) we eagerly preload both the
gitmodules file as well as the packfiles so that the threads won't race
with one another to initialize these data structures.
For packfiles, this is done by calling `packfile_store_get_packs()`,
which first loads our packfiles and then returns a pointer to the first
such packfile. This pointer is ignored though, as all we really care
about is that `packfile_store_prepare()` was called.
Historically, that function was file-local to "packfile.c", but that
changed with 4188332569 (packfile: move `get_multi_pack_index()` into
"midx.c", 2025-09-02). We can thus simplify the code by calling that
function directly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running maintenance tasks via git-maintenance(1) we have a couple
of auto-conditions that check whether or not a specific task should be
running. One such check is for incremental repacks, which essentially
use `git multi-pack-index repack` to repack a set of smaller packfiles
into one larger packfile.
The auto-condition for this task checks how many packfiles there are
that aren't indexed by any multi-pack index. If there is a sufficient
number then we execute the above command to combine those into a single
pack and add that pack to the MIDX.
As we don't care about MIDX'd packs we use `packfile_store_get_packs()`,
which knows to not load any packs that are indexed by a MIDX. But as
explained in the preceding commit, we want to get rid of that function.
We already handle packfiles that have a MIDX by the very nature of this
function, as we explicitly count non-MIDX'd packs. As such, we can
trivially switch over to use `packfile_store_get_all_packs()` instead.
Do so.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When searching for abbreviated or when trying to disambiguate object IDs
we do this in two steps:
1. We search through the multi-pack index.
2. We search through all packfiles not part of any multi-pack index.
The second step uses `packfile_store_get_packs()`, which knows to skip
loading any packfiles that are indexed by an MIDX; this is exactly what
we want.
But that function is somewhat problematic, as its behaviour is stateful
and is influenced by `packfile_store_get_all_packs()`. This function
basically does the same as `packfile_store_get_packs()`, but in addition
it also loads all packfiles indexed by an MIDX. The problem here is that
both of these functions act on the same linked list of packfiles, and
thus depending on whether or not `get_all_packs()` was called the result
returned by `get_packs()` will be different. Consequently, all callers
of `get_packs()` need to be prepared to see MIDX'd packs even though
these should in theory be excluded.
This interface is confusing and thus potentially dangerous, which is why
we're converting all callers of `get_packs()` to use `get_all_packs()`
instead.
Do so for the above functions in "object-name.c". As explained, we
already know to skip any MIDX'd packs in both `find_abbrev_len_packed()`
and `find_short_packed_object()`, so it's fine to start loading MIDX'd
packfiles.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 5040f9f164 ("doc: add technical design doc for large object
promisors", 2025-02-18) added the large object promisors document
as a technical document (with a '.txt' extension). The merge commit
2c6fd30198 ("Merge branch 'cc/lop-remote'", 2025-03-05) seems to
have renamed the file with an '.adoc' extension.
Despite the '.adoc' extension, this document was not being formatted
by asciidoc(tor) as part of the docs build. In order to do so, add
the document to the make and meson build files.
Having added the document to the build, asciidoc and asciidoctor find
(slightly different) problems with the syntax of the input document.
The first set of warnings (only issued by asciidoc) relate to some
'section title out of sequence: expected level 3, got level 4'. This
document uses 'setext' style of section headers, using a series of
underline characters, where the character used denotes the level of
the title. From document title to level 5 (see [1]), these characters
are =, -, ~, ^, +. This does not seem to fit the error message, which
implies that those characters denote levels 0 -> 4. Replacing the headings
underlined with '+' by the '^' character eliminates these warnings.
The second set of warnings (only issued by asciidoctor) relate to some
headings which seem to use both arabic and roman numerals as part of
a single 'list' sequence. This elicited either 'unterminated listing
block' or (for example) 'list item index: expected I, got II' warnings.
In order not to mix arabic and roman numerals, remove the numeral from
the '0) Non goals' heading. Similarly, the remaining roman numeral
entries had the ')' removed and turned into regular headings with I, II,
III ... at the beginning.
[1] https://asciidoctor.org/docs/asciidoc-recommended-practices/
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The formatting markup syntax used in this document (markdown?) is not
interpreted correctly by asciidoc or asciidoctor. The main problem is
the use of a '## ' prefix markup for some sub-headings, along with the
use of '```' code markup and some missing literal blocks.
In order to improve the (html) document formatting:
- replace the '## ' prefix sub-title syntax with the '~~' underlining
syntax for the relevant sub-headings.
- replace the '```' code markup, which causes asciidoc(tor) to simply
remove the marked up text, with a literal block '----' markup.
- the second ascii diagram, in the 'Merging commit-graph files'
section, is not rendered correctly by asciidoctor (asciidoc is fine)
so enclose it in a '....' block.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both asciidoc and asciidoctor issue warnings about 'list item index:
expected n got n-1' for n=1->7 on lines 928, 931, 951, 974, 980, 1033
and 1049. In asciidoc, numbered lists must start at one, whereas this
file has a list starting at zero. Also, asciidoc and asciidoctor warn
about 'section title out of sequence: expected level 1, got level 2'
on line 17. (asciidoc only complains about the first instance of this,
while asciidoctor complains about them all, on lines 95, 258, 303, 316,
545, 612, 752, 824, 895, 923 and 1053). These warnings stem from the
section titles not being correctly nested within a document/chapter
title.
In order to address the first set of warnings, simply renumber the list
from one to seven, rather than zero to six. Fortunately, this does not
require altering additional text, since the enumeration of 'Known Bugs'
is not referred to anywhere else in the document.
In order to address the second set of warnings, change the section title
syntax from '=== title ===' to '== title ==', effectively reducing the
nesting level of the title by one. Also, some apparent (sub-)titles are
not marked up with sub-title syntax, so add some '=== ' prefix(s) to the
relevant headings.
In addition to the warnings, address some other formatting issues:
- the use of heavily nested unordered lists is not reflected in the
output (making the file totally unreadable) because each level of
nesting requires a different syntax. (i.e. replace '*' with '**'
for the second level, '*' with '***' for the third level, etc.)
- make use of literal blocks and manual indentation to get asciidoc
and asciidoctor to display even remotely similar output.
- make use of labelled lists, in some places, to get a similar looking
output to the input, for both asciidoc and asciidoctor.
- replace the trailing space in: `git grep ${SEARCH_TERM} OLDREV `
otherwise the entire line in which that appears is removed from
the output.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both asciidoc and ascidoctor issue warnings about 'list item index:
expected n got n-1' for n=1->9 on lines 13, 15, 17, 20, 23, 25, 29,
31 and 33. In asciidoc, numbered lists must start at one, whereas this
file has a list starting at zero. Also, asciidoc and asciidoctor warn
about 'section title out of sequence: expected level 1, got level 2'
on line 38. (asciidoc only complains about the first instance of this,
while asciidoctor complains about them all, on lines 94, 141, 142,
184, 185, 257, 288, 289, 290, 397, 424, 485, 486 and 487). These
warnings stem from the section titles not being correctly nested within
a document/chapter title.
In order to address the first set of warnings, simply renumber the list
from one to nine, rather than zero to eight. This also requires altering
the text which refers to the section numbers, including other section
titles.
In order to address the second set of warnings, change the section title
syntax from '=== title ===' to '== title ==', effectively reducing the
nesting level of the title by one. Also, some of the titles are given
over multiple lines (they are very long), with an title '===' prefix
on each line. This leads to them being treated as separate sections
with no body text (as you can see from the line numbers given for the
asciidoctor warnings, above). So, for these titles, turn them into a
single (long) line of text.
In addition to the warnings, address some other formatting issues:
- the ascii branch diagrams didn't format correctly on asciidoctor
so include them in a literal block.
- several blocks of text were intended to be formatted 'as is' but
were not included in a literal block.
- in section 8, format the (A)->(D) in the text description as a
literal with `` marks, since (C) is rendered as a copyright
symbol in html otherwise.
- in section 9, a sub-list of two items is not formatted as such.
change the '*' introducer to '**' to correct the sub-list format.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Over the past several dozen commits, we have moved a large amount of
functionality out of the repack builtin and into other files like
repack.c, repack-cruft.c, repack-filtered.c, repack-midx.c, and
repack-promisor.c.
These files specify the minimal set of `#include`s that they need to
compile successfully, but we did not change the set of `#include`s in
the repack builtin itself.
Now that the code movement is complete, let's clean up that set of
`#include`s and trim down the builtin to include the minimal amount of
external headers necessary to compile.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In an identical fashion as the previous commit, move the function
`write_cruft_pack()` into its own compilation unit, and make the
function visible through the repack.h API.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a similar fashion as in previous commits, move the function
`write_filtered_pack()` out of the builtin and into its own compilation
unit.
This function is now part of the repack.h API, but implemented in its
own "repack-filtered.c" unit as it is a separate component from other
kinds of repacking operations.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "pack_kept_objects" variable is defined as static to the repack
builtin, but is inherently related to the pack-objects arguments that
the builtin uses when generating new packs.
Move that field into the "struct pack_objects_args", and shuffle around
where we append the corresponding command-line option when preparing a
pack-objects process. Specifically:
- `write_cruft_pack()` always wants to pass "--honor-pack-keep", so
explicitly set the `pack_kept_objects` field to "0" when initializing
the `write_pack_opts` struct before calling `write_cruft_pack()`.
- `write_filtered_pack()` no longer needs to handle writing the
command-line option "--honor-pack-keep" when preparing a pack-objects
process, since its call to `prepare_pack_objects()` will have already
taken care of that.
`write_filtered_pack()` also reads the `pack_kept_objects` field to
determine whether to write the existing kept packs with a leading "^"
character, so update that to read through the `po_args` pointer
instead.
- `cmd_repack()` also no longer has to write the "--honor-pack-keep"
flag explicitly, since this is also handled via its call to
`prepare_pack_objects()`.
Since there is a default value for "pack_kept_objects" that relies on
whether or not we are writing a bitmap (and not writing a MIDX), extract
a default initializer for `struct pack_objects_args` that keeps this
conditional default behavior.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a similar spirit as the previous commit(s), now that the function
`finish_pack_objects_cmd()` has no explicit dependencies within the
repack builtin, let's extract it.
This prepares us to extract the remaining two functions within the
repack builtin that explicitly write packfiles, which are
`write_cruft_pack()` and `write_filtered_pack()`, which will be done in
the future commits.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To prepare to move the `finish_pack_objects_cmd()` function out of the
builtin and into the repack.h API, there are a couple of things we need
to do first:
- First, let's take advantage of `write_pack_opts_is_local()` function
introduced in the previous commit instead of passing "local"
explicitly.
- Let's also avoid referring to the static 'packtmp' field within
builtin/repack.c by instead accessing it through the write_pack_opts
argument.
There are three callers which need to adjust themselves in order to
account for this change. The callers which reside in write_cruft_pack()
and write_filtered_pack() both already have an "opts" in scope, so they
can pass it through transparently.
The other call (at the bottom of `cmd_repack()`) needs to initialize its
own write_pack_opts to pass the necessary fields over to the direct call
to `finish_pack_objects_cmd()`.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to the previous commit, the functions `write_cruft_pack()` and
`write_filtered_pack()` both compute a "local" variable via the exact
same mechanism:
const char *scratch;
int local = skip_prefix(opts->destination, opts->packdir, &scratch);
Not only does this cause us to repeat the same pair of lines, it also
introduces an unnecessary "scratch" variable that is common between both
functions.
Instead of repeating ourselves, let's extract that functionality into a
new function in the repack.h API called "write_pack_opts_is_local()".
That function takes a pointer to a "struct write_pack_opts" (which has
as fields both "destination" and "packdir"), and can encapsulate the
dangling "scratch" field.
Extract that function and make it visible within the repack.h API, and
use it within both `write_cruft_pack()` and `write_filtered_pack()`.
While we're at it, match our modern conventions by returning a "bool"
instead of "int", and use `starts_with()` instead of `skip_prefix()` to
avoid storing the dummy "scratch" variable.
The remaining duplication (that is, that both `write_cruft_pack()` and
`write_filtered_pack()` still both call `write_pack_opts_is_local()`)
will be addressed in the following commit.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both callers within the repack builtin which call functions that take a
'write_pack_opts' structure have the following pattern:
struct write_pack_opts opts = {
.packdir = packdir,
.packtmp = packtmp,
.pack_prefix = find_pack_prefix(packdir, packtmp),
/* ... */
};
int ret = write_some_kind_of_pack(&opts, /* ... */);
, but both "packdir" and "packtmp" are fields within the write_pack_opts
struct itself!
Instead of also computing the pack_prefix ahead of time, let's have the
callees compute it themselves by moving `find_pack_prefix()` out of the
repack builtin, and have it take a write_pack_opts pointer instead of
the "packdir" and "packtmp" fields directly.
This avoids the callers having to do some prep work that is common
between the two of them, but also avoids the potential pitfall of
accidentally writing:
.pack_prefix = find_pack_prefix(packtmp, packdir),
(which is well-typed) when the caller meant to instead write:
.pack_prefix = find_pack_prefix(packdir, packtmp),
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to the changes made in the previous commit to
`write_filtered_pack()`, teach `write_cruft_pack()` to take a
`write_pack_opts` struct and use that where possible.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are various functions within the 'repack' builtin which are
responsible for writing different kinds of packs. They include:
- `static int write_filtered_pack(...)`
- `static int write_cruft_pack(...)`
as well as the function `finish_pack_objects_cmd()`, which is
responsible for finalizing a new pack write, and recording the checksum
of its contents in the 'names' list.
Both of these `write_` functions have a few things in common. They both
take a pointer to the 'pack_objects_args' struct, as well as a pair of
character pointers for `destination` and `pack_prefix`.
Instead of repeating those arguments for each function, let's extract an
options struct called "write_pack_opts" which has these three parameters
as member fields. While we're at it, add fields for "packdir," and
"packtmp", both of which are static variables within the builtin, and
need to be read from within these two functions.
This will shorten the list of parameters that callers have to provide to
`write_filtered_pack()`, avoid ambiguity when passing multiple variables
of the same type, and provide a unified interface for the two functions
mentioned earlier.
(Note that "pack_prefix" can be derived on the fly as a function of
"packdir" and "packtmp", making it unnecessary to store "pack_prefix"
explicitly. This commit ignores that potential cleanup in the name of
doing as few things as possible, but a later commit will make that
change.)
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we have sufficiently cleaned up the write_midx_included_packs()
function, we can move it (along with the struct repack_write_midx_opts)
out of the builtin, and into the repack.h header.
Since this function (and the static ones that it depends on) are
MIDX-specific details of the repacking process, move them to the
repack-midx.c compilation unit instead of the general repack.c one.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To write a MIDX at the end of a repack operation, 'git repack' presently
computes the set of packs to write into the MIDX, before invoking
`write_midx_included_packs()` with a `string_list` containing those
packs.
The logic for computing which packs are supposed to appear in the
resulting MIDX is within `midx_included_packs()`, where it is aware of
details like which cruft pack(s) were written/combined, if/how we did a
geometric repack, etc.
Computing this list ourselves before providing it to the sole function
to make use of that list `write_midx_included_packs()` is somewhat
awkward. In the future, repack will learn how to write incremental
MIDXs, which will use a very different pack selection routine.
Instead of doing something like:
struct string_list included_packs = STRING_LIST_INIT_DUP;
if (incremental) {
midx_incremental_included_packs(&included_packs, ...):
write_midx_incremental_included_packs(&included_packs, ...);
} else {
midx_included_packs(&included_packs, ...):
write_midx_included_packs(&included_packs, ...);
}
in the future, let's have each function that writes a MIDX be
responsible for itself computing the list of included packs. Inline the
declaration and initialization of `included_packs` into the
`write_midx_included_packs()` function itself, and repeat that pattern
in the future when we introduce new ways to write MIDXs.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of passing individual parameters (in this case, "existing",
"names", and "geometry") to `midx_included_packs()`, pass a pointer to a
`repack_write_midx_opts` structure instead.
Besides reducing the number of parameters necessary to call the
`midx_included_packs` function, this refactoring sets us up nicely to
inline the call to `midx_included_packs()` into
`write_midx_included_packs()`, thus making the caller (in this case,
`cmd_repack()`) oblivious to the set of packs being written into the
MIDX.
In order to do this, `repack_write_midx_opts` has to keep track of the
set of existing packs, so add an additional field to point to that set.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After writing a new MIDX, the repack command removes any bitmaps
belonging to packs which were written into the MIDX.
This is currently done in a separate function outside of
`write_midx_included_packs()`, which forces the caller to keep track of
the set of packs written into the MIDX.
Prepare to no longer require the caller to keep track of such
information by inlining the clean-up into `write_midx_included_packs()`.
Future commits will make the caller oblivious to the set of packs
included in the MIDX altogether.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
