| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Built-in Git subcommands are supplied the repository object to work
with; they learned to do the same when they invoke sub-subcommands.
* kn/pass-repo-to-builtin-sub-sub-commands:
builtin: pass repository to sub commands
|
|
In 9b1cb5070f (builtin: add a repository parameter for builtin
functions, 2024-09-13) the repository was passed down to all builtin
commands. This allowed the repository to be passed down to lower layers
without depending on the global `the_repository` variable.
Continue this work by also passing down the repository parameter from
the command to sub-commands. This will help pass down the repository to
other subsystems and cleanup usage of global variables like
'the_repository' and 'the_hash_algo'.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both `git sparse-checkout add` and `git sparse-checkout set` accept a
list of additional directories or patterns. These get massaged via calls
to `sanitize_paths()`, which may end up modifying the passed-in array by
updating its pointers to be prefixed paths. This allocates memory that
we never free.
Refactor the code to instead use a `struct strvec`, which makes it way
easier for us to track the lifetime correctly. The couple of extra
memory allocations likely do not matter as we only ever populate it with
command line arguments.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git sparse-checkout disable" turns a sparse checkout into a
regular checkout, the index is fully expanded. This totally
expected behaviour however had an "oops, we are expanding the
index" advice message, which has been corrected.
* ds/sparse-checkout-expansion-advice:
sparse-checkout: disable advice in 'disable'
|
|
When running 'git sparse-checkout disable' with the sparse index
enabled, Git is expected to expand the index into a full index. However,
it currently outputs the advice message saying that that is unexpected
and likely due to an issue with the working directory.
Disable this advice message when in this code path. Establish a pattern
for doing a similar removal in the future.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The convention to calling into built-in command implementation has
been updated to pass the repository, if known, together with the
prefix value.
* jc/pass-repo-to-builtins:
add: pass in repo variable instead of global the_repository
builtin: remove USE_THE_REPOSITORY for those without the_repository
builtin: remove USE_THE_REPOSITORY_VARIABLE from builtin.h
builtin: add a repository parameter for builtin functions
|
|
Instead of including USE_THE_REPOSITORY_VARIABLE by default on every
builtin, remove it from builtin.h and add it to all the builtins that
include builtin.h (by definition, that means all builtins/*.c).
Also, remove the include statement for repository.h since it gets
brought in through builtin.h.
The next step will be to migrate each builtin
from having to use the_repository.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to reduce the usage of the global the_repository, add a
parameter to builtin functions that will get passed a repository
variable.
This commit uses UNUSED on most of the builtin functions, as subsequent
commits will modify the actual builtins to pass the repository parameter
down.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When updating sparse patterns, we open a lock_file to write out the new
data. The lock_file struct holds the file descriptor, but we call
fdopen() to get a stdio handle to do the actual write.
After we finish writing, we fflush() so that all of the data is on disk,
and then call commit_lock_file() which closes the descriptor. But we
never fclose() the stdio handle, leaking it.
The obvious solution seems like it would be to just call fclose(). But
when? If we do it before commit_lock_file(), then the lock_file code is
left thinking it owns the now-closed file descriptor, and will do an
extra close() on the descriptor. But if we do it before, we have the
opposite problem: the lock_file code will close the descriptor, and
fclose() will do the extra close().
We can handle this correctly by using fdopen_lock_file(). That leaves
ownership of the stdio handle with the lock_file, which knows not to
double-close it.
We do have to adjust the code a bit:
- we have to handle errors ourselves; we can just die(), since that's
what xfdopen() would have done (and we can even provide a more
specific error message).
- we no longer need to call fflush(); committing the lock-file
auto-closes it, which will now do the flush for us. As a bonus, this
will actually check that the flush was successful before renaming
the file into place.
- we can get rid of the local "fd" variable, since we never look at it
ourselves now
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When writing a new "sparse-checkout" file, we do the usual strategy of
writing to a lockfile and committing it into place. But we don't check
the outcome of commit_lock_file(). Failing there would prevent us from
writing a bogus file (good), but we would ignore the error and return a
successful exit code (bad).
Fix this by calling die(). Note that we need to keep the sparse_filename
variable valid for longer, since the filename stored in the lock_file
struct will be dropped when we run commit_lock_file().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In write_patterns_and_update(), we always need to free the pattern list
before exiting the function. Rather than handling it manually when we
return early, we can jump to an "out" label where cleanup happens. This
let us drop one line, but also establishes a pattern we can use for
other cleanup.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More memory leaks have been plugged.
* ps/leakfixes-more: (29 commits)
builtin/blame: fix leaking ignore revs files
builtin/blame: fix leaking prefixed paths
blame: fix leaking data for blame scoreboards
line-range: plug leaking find functions
merge: fix leaking merge bases
builtin/merge: fix leaking `struct cmdnames` in `get_strategy()`
sequencer: fix memory leaks in `make_script_with_merges()`
builtin/clone: plug leaking HEAD ref in `wanted_peer_refs()`
apply: fix leaking string in `match_fragment()`
sequencer: fix leaking string buffer in `commit_staged_changes()`
commit: fix leaking parents when calling `commit_tree_extended()`
config: fix leaking "core.notesref" variable
rerere: fix various trivial leaks
builtin/stash: fix leak in `show_stash()`
revision: free diff options
builtin/log: fix leaking commit list in git-cherry(1)
merge-recursive: fix memory leak when finalizing merge
builtin/merge-recursive: fix leaking object ID bases
builtin/difftool: plug memory leaks in `run_dir_diff()`
object-name: free leaking object contexts
...
|
|
The `OPT_FILENAME()` option will, if set, put an allocated string into
the user-provided variable. Consequently, that variable thus needs to be
free'd by the caller of `parse_options()`. Some callsites don't though
and thus leak memory. Fix those.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In insert_recursive_pattern(), we create a new pattern_entry to insert
into the parent_hashmap. If we find that the same entry already exists
in the hashmap, we skip adding the new one. But we forget to free the new
one, creating a leak.
We can fix it by cleaning up the discarded entry. It would probably be
possible to avoid creating it in the first place, but it's non-trivial.
We'd have to define a "keydata" struct that lets us compare the existing
entries to the broken-out fields. It's probably not worth the
complexity, so we'll punt on that for now.
There is one subtlety here: our insertion is happening in a loop, with
each iteration looking at the pattern we just inserted (hence the
"recursive" in the name). So if we skip insertion, what do we look at?
The obvious answer is that we should remember the existing duplicate we
found and use that. But I _think_ in that case, we probably already have
all of the recursive bits already (from when the original entry was
added). And so just breaking out of the loop would be correct. But I'm
not 100% sure on that; after all, the original leaky code could have
done the same break, but it didn't.
So I went with the "obvious answer" above, which has no chance of
changing the behavior aside from fixing the leak.
With this patch, t1091 can now be marked leak-free.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In sparse_checkout_list(), we put the hashmap entries into a string_list
so we can sort them. But after printing, we forget to free the list.
This patch drops 5 leaks from t1091.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In sparse_checkout_list(), we create a pattern_list that needs to
eventually be cleared. We remember to do so in the regular code path,
but the cone-mode path does an early return, and forgets to clean up.
We could fix the leak by adding a new call to clear_pattern_list(). But
we can simplify even further by just skipping the early return, pushing
the other code path (which consists now of only one line!) into an else
block. That also matches the same cone/non-cone if/else used in some
other functions.
This fixes 15 leaks found in t1091.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We allocate a heap buffer via get_sparse_checkout_filename(). Most calls
remember to free it, but sparse_checkout_init() forgets to, causing a
leak. Ironically, it remembers to do so in the error return paths, but
not in the path that makes it all the way to the function end!
Fixing this clears up 6 leaks from t1091.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In update_working_directory(), we take in a pattern_list, attach it to
the repository index by assigning it to index->sparse_checkout_patterns,
and then call unpack_trees. Afterwards, we remove it by setting
index->sparse_checkout_patterns back to NULL.
But there are two possible leaks here:
1. If the index already had a populated sparse_checkout_patterns,
we've obliterated it. We can fix this by saving and restoring it,
rather than always setting it back to NULL.
2. We may call the function with a NULL pattern_list, expecting it to
use the on-disk sparse file. In that case, the index routines will
lazy-load the sparse patterns automatically. But now at the end of
the function when we restore the patterns, we'll leak those
lazy-loaded ones!
We can fix this by freeing the pattern list before overwriting its
pointer whenever it does not match what was passed in (in practice
this should only happen when the passed-in list is NULL, but this
is erring on the defensive side).
Together these remove 48 indirect leaks found in t1091.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In add_patterns_from_input(), we may read lines from a file with a loop
like this:
while (!strbuf_getline(&line, file)) {
...
strbuf_to_cone_pattern(&line, pl);
}
/* we don't strbuf_release(&line) here! */
This generally is OK because strbuf_to_cone_pattern() consumes the
buffer via strbuf_detach(). But we can leak in a few cases:
1. We don't always consume the buffer! If the line ends up empty after
trimming, we leave strbuf_to_cone_pattern() without detaching. In
most cases this is OK, because a subsequent getline() call will use
the same buffer. But if you had an empty line at the end of file,
for example, it would leak.
2. Even if strbuf_to_cone_pattern() always consumed the buffer,
there's a subtle issue with strbuf_getline(). As we saw in
94e2aa555e (strbuf: fix leak when `appendwholeline()` fails with
EOF, 2024-05-27), it's possible for it to return EOF with an
allocated buffer (e.g., if the underlying getdelim() call saw an
error). So we should always strbuf_release() after finishing a read
loop like this.
Note that even the code to read patterns from argv has the same problem.
Because that also uses strbuf_to_cone_pattern(), we stuff each argv
entry into a strbuf. It uses the same "line" strbuf as the getline code,
but we should position the strbuf_release() to cover both code paths.
This fixes at least 9 leaks found in t1091.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we read patterns from --stdin, we loop on strbuf_getline(), and
detach each line we read to pass into add_pattern(). This used to be
necessary because add_pattern() required that the pattern strings remain
valid while the pattern_list was in use. But it also created a leak,
since we didn't record the detached buffers anywhere else.
Now that add_pattern() has been modified to make its own copy of the
strings, we can stop detaching and fix the leak. This fixes 4 leaks
detected in t1091.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In sparse_checkout_init(), we first try to load patterns from an
existing file. If we found any, we return immediately, but end up
leaking the patterns we parsed. Fixing this reduces the number of leaks
in t7002 from 9 down to 5.
Note that there are two other exits from the function, but they don't
need the same treatment:
- if we can't resolve HEAD, we write out a hard-coded sparse file and
return. But we know the pattern list is empty there, since we didn't
find any in the on-disk file and we haven't yet added any of our
own.
- otherwise, we do populate the list and then tail-call into
write_patterns_and_update(). But that function frees the
pattern_list itself, so we don't need to.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The add_pattern() function takes a pattern string, but neither makes a
copy of it nor takes ownership of the memory. So it is the caller's
responsibility to make sure the string hangs around as long as the
pattern_list which references it.
There are a few cases in sparse-checkout where we use string literal
patterns by stuffing them into a strbuf, detaching the buffer, and then
passing the result into add_pattern(). This creates a leak when the
pattern_list is eventually cleared, since we don't retain a copy of the
detached buffer to free.
But we can observe that the whole strbuf dance is unnecessary. The point
was presumably[1] to satisfy the lifetime requirement of the string. But
string literals have static duration; we can count on them lasting for
the whole program.
So we can fix the leak by just passing them directly. And as a bonus,
that simplifies the code. The leaks can be seen in t7002, which drops
from 25 leaks to 22 with this patch. It also makes t3602 and t1090
leak-free.
In the long run, we will also want to clean up this (undocumented!)
memory lifetime requirement of add_pattern(). But that can come in a
later patch; passing the string literals directly will be the right
thing either way.
[1] The code in question comes from 416adc8711 (sparse-checkout: update
working directory in-process for 'init', 2019-11-21) and 99dfa6f970
(sparse-checkout: use in-process update for disable subcommand,
2019-11-21), but I didn't see anything in their commit messages or
on the list explaining the strbufs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use a string list to hold sorted and de-duped patterns, but don't
free it before leaving the function, causing a leak.
This drops the number of leaks found in t7002 from 27 to 25.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git sparse-checkout (add|set) --[no-]cone --end-of-options" did
not handle "--end-of-options" correctly after a recent update.
* en/sparse-checkout-eoo:
sparse-checkout: be consistent with end of options markers
|
|
"git sparse-checkout set" added default patterns even when the
patterns are being fed from the standard input, which has been
corrected.
* jc/sparse-checkout-set-default-fix:
sparse-checkout: use default patterns for 'set' only !stdin
|
|
"git sparse-checkout set ---no-cone" uses default patterns when none
is given from the command line, but it should do so ONLY when
--stdin is not being used. Right now, add_patterns_from_input()
called when reading from the standard input is sloppy and does not
check if there are extra command line parameters that the command
will silently ignore, but that will change soon and not setting this
unnecessary and unused default patterns start to matter when it gets
fixed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
93851746 (parse-options: decouple "--end-of-options" and "--",
2023-12-06) updated the world order to make callers of parse-options
that set PARSE_OPT_KEEP_UNKNOWN_OPT responsible for deciding what to
do with "--end-of-options" they may see after parse_options() returns.
This made a previous bug in sparse-checkout more visible; namely,
that
git sparse-checkout [add|set] --[no-]cone --end-of-options ...
would simply treat "--end-of-options" as one of the paths to include in
the sparse-checkout. But this was already problematic before; namely,
git sparse-checkout [add|set| --[no-]cone --sikp-checks ...
would not give an error on the mis-typed "--skip-checks" but instead
simply treat "--sikp-checks" as a path or pattern to include in the
sparse-checkout, which is highly unfriendly.
This behavior began when the command was converted to parse-options in
7bffca95ea (sparse-checkout: add '--stdin' option to set subcommand,
2019-11-21). Back then it was just called KEEP_UNKNOWN. Later it was
renamed to KEEP_UNKNOWN_OPT in 99d86d60e5 (parse-options:
PARSE_OPT_KEEP_UNKNOWN only applies to --options, 2022-08-19) to clarify
that it was only about dashed options; we always keep non-option
arguments. Looking at that original patch, both Peff and I think that
the author was simply confused about the mis-named option, and really
just wanted to keep the non-option arguments. We never should have used
the flag all along (and the other cases were cargo-culted within the
file).
Remove the erroneous PARSE_OPT_KEEP_UNKNOWN_OPT flag now to fix this
bug. Note that this does mean that anyone who might have been using
git sparse-checkout [add|set] [--[no-]cone] --foo --bar
to request paths or patterns '--foo' and '--bar' will now have to use
git sparse-checkout [add|set] [--[no-]cone] -- --foo --bar
That makes sparse-checkout more consistent with other git commands,
provides users much friendlier error messages and behavior, and is
consistent with the all-caps warning in git-sparse-checkout.txt that
this command "is experimental...its behavior...will likely change". :-)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Header clean-up.
* en/header-split-cache-h: (24 commits)
protocol.h: move definition of DEFAULT_GIT_PORT from cache.h
mailmap, quote: move declarations of global vars to correct unit
treewide: reduce includes of cache.h in other headers
treewide: remove double forward declaration of read_in_full
cache.h: remove unnecessary includes
treewide: remove cache.h inclusion due to pager.h changes
pager.h: move declarations for pager.c functions from cache.h
treewide: remove cache.h inclusion due to editor.h changes
editor: move editor-related functions and declarations into common file
treewide: remove cache.h inclusion due to object.h changes
object.h: move some inline functions and defines from cache.h
treewide: remove cache.h inclusion due to object-file.h changes
object-file.h: move declarations for object-file.c functions from cache.h
treewide: remove cache.h inclusion due to git-zlib changes
git-zlib: move declarations for git-zlib functions from cache.h
treewide: remove cache.h inclusion due to object-name.h changes
object-name.h: move declarations for object-name.c functions from cache.h
treewide: remove unnecessary cache.h inclusion
treewide: be explicit about dependence on mem-pool.h
treewide: be explicit about dependence on oid-array.h
...
|
|
"git sparse-checkout" command learns a debugging aid for the sparse
rule definitions.
* ws/sparse-check-rules:
builtin/sparse-checkout: add check-rules command
builtin/sparse-checkout: remove NEED_WORK_TREE flag
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Split key function and data structure definitions out of cache.h to
new header files and adjust the users.
* en/header-split-cleanup:
csum-file.h: remove unnecessary inclusion of cache.h
write-or-die.h: move declarations for write-or-die.c functions from cache.h
treewide: remove cache.h inclusion due to setup.h changes
setup.h: move declarations for setup.c functions from cache.h
treewide: remove cache.h inclusion due to environment.h changes
environment.h: move declarations for environment.c functions from cache.h
treewide: remove unnecessary includes of cache.h
wrapper.h: move declarations for wrapper.c functions from cache.h
path.h: move function declarations for path.c functions from cache.h
cache.h: remove expand_user_path()
abspath.h: move absolute path functions from cache.h
environment: move comment_line_char from cache.h
treewide: remove unnecessary cache.h inclusion from several sources
treewide: remove unnecessary inclusion of gettext.h
treewide: be explicit about dependence on gettext.h
treewide: remove unnecessary cache.h inclusion from a few headers
|
|
Code clean-up around the use of the_repository.
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
|
|
en/header-split-cache-h
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
|
|
Apply the part of "the_repository.pending.cocci" pertaining to
"cache.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There exists no direct way to interrogate git about which paths are
matched by a given set of sparsity rules. It is possible to get this
information from git, but it includes checking out the commit that
contains the paths, applying the sparse checkout patterns and then using
something like 'git ls-files -t' to check if the skip worktree bit is
set. This works in some case, but there are cases where it is awkward or
infeasible to generate a checkout for this purpose.
Exposing the pattern matching of sparse checkout enables more tooling to
be built and avoids a situation where tools that want to reason about
sparse checkouts start containing parallel implementation of the rules.
To accommodate this, add a 'check-rules' subcommand to the
'sparse-checkout' builtin along the lines of the 'git check-ignore' and
'git check-attr' commands. The new command accepts a list of paths on
stdin and outputs just the ones the match the sparse checkout.
To allow for use in a bare repository and to allow for interrogating
about other patterns than the current ones, include a '--rules-file'
option which allows the caller to explicitly pass sparse checkout rules
in the format accepted by 'sparse-checkout set --stdin'.
To allow for reuse of the handling of input patterns for the
'--rules-file' flag, modify 'add_patterns_from_input()' to be able to
read from a 'FILE' instead of just stdin.
To allow for reuse of the logic which decides whether or not rules
should be interpreted as cone-mode patterns, split that part out of
'update_modes()' such that can be called without modifying the config.
An alternative could have been to create a new 'check-sparsity' command.
However, placing it under 'sparse-checkout' allows for a) more easily
re-using the sparse checkout pattern matching and cone/non-code mode
handling, and b) keeps the documentation for the command next to the
experimental warning and the cone-mode discussion.
Signed-off-by: William Sprent <williams@unity3d.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for adding a sub-command to 'sparse-checkout' that can be
run in a bare repository, remove the 'NEED_WORK_TREE' flag from its
entry in the 'commands' array of 'git.c'.
To avoid that this changes any behaviour, add calls to
'setup_work_tree()' to all of the 'sparse-checkout' sub-commands and add
tests that verify that 'sparse-checkout <cmd>' still fail with a clear
error message telling the user that the command needs a work tree.
Signed-off-by: William Sprent <williams@unity3d.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 2f6b1eb794 ("cache API: add a "INDEX_STATE_INIT" macro/function,
add release_index()", 2023-01-12) mistakenly added some initialization
of a member of unpack_trees_options that was intended to be
internal-only. This initialization should be done within
update_sparsity() instead.
Note that while o->result is mostly meant for unpack_trees() and
update_sparsity() mostly operates without o->result,
check_ok_to_remove() does consult it so we need to ensure it is properly
initialized.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
struct unpack_trees_options has the following field and comment:
struct pattern_list *pl; /* for internal use */
Despite the internal-use comment, commit e091228e17 ("sparse-checkout:
update working directory in-process", 2019-11-21) starting setting this
field from an external caller. At the time, the only way around that
would have been to modify unpack_trees() to take an extra pattern_list
argument, and there's a lot of callers of that function. However, when
we split update_sparsity() off as a separate function, with
sparse-checkout being the sole caller, the need to update other callers
went away. Fix this API problem by adding a pattern_list argument to
update_sparsity() and stop setting the internal o.pl field directly.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the "repo" member was added to "the_index" in [1] the
repo_read_index() was made to populate it, but the unpopulated
"the_index" variable didn't get the same treatment.
Let's do that in initialize_the_repository() when we set it up, and
likewise for all of the current callers initialized an empty "struct
index_state".
This simplifies code that needs to deal with "the_index" or a custom
"struct index_state", we no longer need to second-guess this part of
the "index_state" deep in the stack. A recent example of such
second-guessing is the "istate->repo ? istate->repo : the_repository"
code in [2]. We can now simply use "istate->repo".
We're doing this by making use of the INDEX_STATE_INIT() macro (and
corresponding function) added in [3], which now have mandatory "repo"
arguments.
Because we now call index_state_init() in repository.c's
initialize_the_repository() we don't need to handle the case where we
have a "repo->index" whose "repo" member doesn't match the "repo"
we're setting up, i.e. the "Complete the double-reference" code in
repo_read_index() being altered here. That logic was originally added
in [1], and was working around the lack of what we now have in
initialize_the_repository().
For "fsmonitor-settings.c" we can remove the initialization of a NULL
"r" argument to "the_repository". This was added back in [4], and was
needed at the time for callers that would pass us the "r" from an
"istate->repo". Before this change such a change to
"fsmonitor-settings.c" would segfault all over the test suite (e.g. in
t0002-gitfile.sh).
This change has wider eventual implications for
"fsmonitor-settings.c". The reason the other lazy loading behavior in
it is required (starting with "if (!r->settings.fsmonitor) ..." is
because of the previously passed "r" being "NULL".
I have other local changes on top of this which move its configuration
reading to "prepare_repo_settings()" in "repo-settings.c", as we could
now start to rely on it being called for our "r". But let's leave all
of that for now, and narrowly remove this particular part of the
lazy-loading.
1. 1fd9ae517c4 (repository: add repo reference to index_state,
2021-01-23)
2. ee1f0c242ef (read-cache: add index.skipHash config option,
2023-01-06)
3. 2f6b1eb794e (cache API: add a "INDEX_STATE_INIT" macro/function,
add release_index(), 2023-01-12)
4. 1e0ea5c4316 (fsmonitor: config settings are repository-specific,
2022-03-25)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Hopefully in some not so distant future, we'll get advantages from always
initializing the "repo" member of the "struct index_state". To make
that easier let's introduce an initialization macro & function.
The various ad-hoc initialization of the structure can then be changed
over to it, and we can remove the various "0" assignments in
discard_index() in favor of calling index_state_init() at the end.
While not strictly necessary, let's also change the CALLOC_ARRAY() of
various "struct index_state *" to use an ALLOC_ARRAY() followed by
index_state_init() instead.
We're then adding the release_index() function and converting some
callers (including some of these allocations) over to it if they
either won't need to use their "struct index_state" again, or are just
about to call index_state_init().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's arguably more correct to say "[<option>...]" than either of these
forms, but the vast majority of our documentation uses the
"[<options>]" form to indicate an arbitrary number of options, let's
do the same in these cases, which were the odd ones out.
In the case of "mv" and "sparse-checkout" let's add the missing "[]"
to indicate that these are optional.
In the case of "t/helper/test-proc-receive.c" there is no *.txt
version, making it the only hunk in this commit that's not a "doc txt
& -h consistency" change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The whitespace padding of alternatives should be of the form "[-f |
--force]" not "[-f|--force]". Likewise we should not have padding
before the first option, so "(--all | <pack-filename>...)" is correct,
not "( --all | <pack-filename>... )".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent commits such as bf0a6b65fc (builtin/multi-pack-index.c: let
parse-options parse subcommands, 2022-08-19) converted a few functions
to match our usual argc/argv/prefix conventions, but the prefix argument
remains unused.
However, there is a good use for it: they should pass it to their own
parse_options() functions, where it may be used to adjust the value of
any filename options. In all but one of these functions, there's no
behavior change, since they don't use OPT_FILENAME. But this is an
actual fix for one option, which you can see by modifying the test suite
like so:
diff --git a/t/t5326-multi-pack-bitmaps.sh b/t/t5326-multi-pack-bitmaps.sh
index 4fe57414c1..d0974d4371 100755
--- a/t/t5326-multi-pack-bitmaps.sh
+++ b/t/t5326-multi-pack-bitmaps.sh
@@ -186,7 +186,11 @@ test_expect_success 'writing a bitmap with --refs-snapshot' '
# Then again, but with a refs snapshot which only sees
# refs/tags/one.
- git multi-pack-index write --bitmap --refs-snapshot=snapshot &&
+ (
+ mkdir subdir &&
+ cd subdir &&
+ git multi-pack-index write --bitmap --refs-snapshot=../snapshot
+ ) &&
test_path_is_file $midx &&
test_path_is_file $midx-$(midx_checksum $objdir).bitmap &&
I'd emphasize that this wasn't broken by bf0a6b65fc; it has been broken
all along, because the sub-function never got to see the prefix. It is
that commit which is actually enabling us to fix it (and which also
brought attention to the problem because it triggers -Wunused-parameter!)
The other functions changed here don't use OPT_FILENAME at all. In their
cases this isn't fixing anything visible, but it's following the usual
pattern and future-proofing them against somebody adding new options and
being surprised.
I didn't include a test for the one visible case above. We don't
generally test routine parse-options behavior for individual options.
The challenge here was finding the problem, and now that this has been
done, it's not likely to regress. Likewise, we could apply the patch
above to cover it "for free" but it makes reading the rest of the test
unnecessarily complicated.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
