| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Instead of passing individual parameters (in this case, "existing",
"names", and "geometry") to `midx_included_packs()`, pass a pointer to a
`repack_write_midx_opts` structure instead.
Besides reducing the number of parameters necessary to call the
`midx_included_packs` function, this refactoring sets us up nicely to
inline the call to `midx_included_packs()` into
`write_midx_included_packs()`, thus making the caller (in this case,
`cmd_repack()`) oblivious to the set of packs being written into the
MIDX.
In order to do this, `repack_write_midx_opts` has to keep track of the
set of existing packs, so add an additional field to point to that set.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After writing a new MIDX, the repack command removes any bitmaps
belonging to packs which were written into the MIDX.
This is currently done in a separate function outside of
`write_midx_included_packs()`, which forces the caller to keep track of
the set of packs written into the MIDX.
Prepare to no longer require the caller to keep track of such
information by inlining the clean-up into `write_midx_included_packs()`.
Future commits will make the caller oblivious to the set of packs
included in the MIDX altogether.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The next commit will inline the call to `remove_redundant_bitmaps()`
into `write_midx_included_packs()`. Reorder these two functions to avoid
a forward declaration to `remove_redundant_bitmaps()`.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of storing the list of MIDX pack names separately, let's inline
it into the existing_packs struct, further reducing the number of
parameters we have to pass around.
This amounts to adding a new string_list to the existing_packs struct,
and populating it via `existing_packs_collect()`. This is fairly
straightforward to do, since we are already looping over all packs, all
we need to do is:
if (p->multi_pack_index)
string_list_append(&existing->midx_packs, pack_basename(p));
Note, however, that this check *must* come before other conditions where
we discard and do not keep track of a pack, including the condition "if
(!p->pack_local)" immediately below. This is because the existing
routine which collects MIDX pack names does so blindly, and does not
discard, for example, non-local packs.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When writing a new MIDX, repack must determine whether or not there are
any packs in the MIDX it is replacing (if one exists) that are not
somehow represented in the new MIDX (e.g., either by preserving the pack
verbatim, or rolling it up as part of a geometric repack, etc.).
In order to do this, it keeps track of a list of pack names from the
MIDX present in the repository at the start of the repack operation.
Since we manipulate and close the object store, we cannot rely on the
repository's in-core representation of the MIDX, since this is subject
to change and/or go away.
When this behavior was introduced in 5ee86c273b (repack: exclude cruft
pack(s) from the MIDX where possible, 2025-06-23), we maintained an
array of character pointers instead of using a convenience API, such as
string-list.h.
Store the list of MIDX pack names in a string_list, thereby reducing the
number of parameters we have to pass to `midx_has_unknown_packs()`.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function 'write_midx_included_packs()', which is responsible for
writing a new MIDX with a given set of included packs, currently takes a
list of six arguments.
In order to extract this function out of the builtin, we have to pass
in a few additional parameters, like 'midx_must_contain_cruft' and
'packdir', which are currently declared as static variables within the
builtin/repack.c compilation unit.
Instead of adding additional parameters to `write_midx_included_packs()`
extract out an "opts" struct that names these parameters, and pass a
pointer to that, making it less cumbersome to add additional parameters.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When writing a MIDX, 'git repack' takes a snapshot of the repository's
references and writes the result out to a file, which it then passes to
'git multi-pack-index write' via the '--refs-snapshot'.
This is done in order to make bitmap selections with respect to what we
are packing, thus avoiding a race where an incoming reference update
causes us to try and write a bitmap for a commit not present in the
MIDX.
Extract this functionality out into a new repack-midx.c compilation
unit, and expose the necessary functions via the repack.h API.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the pack_geometry API is fully factored and isolated from the
rest of the builtin, declare it within repack.h and move its
implementation to "repack-geometry.c" as a separate component.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For similar reasons as the preceding commit, pass the "packdir" variable
directly to `pack_geometry_remove_redundant()` as a parameter to the
function.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prepare to move pack_geometry-related APIs to their own compilation unit
by passing in the static "pack_kept_objects" variable directly as a
parameter to the 'pack_geometry_init()' function.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename functions which work with 'struct pack_geometry' to begin with
"pack_geometry_". While we're at it, change `free_pack_geometry()` to
instead be named `pack_geometry_release()` to match our conventions, and
make clear that that function frees the contents of the struct, not the
memory allocated to hold the struct itself.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we have properly factored the portion of the builtin which is
responsible for repacking promisor objects, we can move that function
(and associated dependencies) out of the builtin entirely.
Similar to previous extractions, this function is declared in repack.h,
but implemented in a separate repack-promisor.c file. This is done to
separate promisor-specific repacking functionality from generic repack
utilities (like "existing_packs", and "generated_pack" APIs).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a similar spirit as previous commit(s), pass the "packtmp" variable
to "repack_promisor_objects()" as an explicit parameter of the function,
preparing us to move this function in a following commit.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we have factored the "generated_pack" API, we can move it to
repack.ch, further slimming down builtin/repack.c.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Repeat what was done in the preceding commit for the
`generated_pack_install()` function, which needs both "packdir" and
"packtmp".
(As an aside, it is somewhat unfortunate that the final three parameters
to this function are all "const char *", making errors like passing
"packdir" and "packtmp" in the wrong order easy. We could define a new
structure here, but that may be too heavy-handed.)
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a similar spirit as previous commits, this function needs to know the
temporary pack prefix, which it currently accesses through the static
"packtmp" variable within builtin/repack.c.
Pass it explicitly as a function parameter to facilitate moving this
function out of builtin/repack.c entirely.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Once all new packs are known to exist, 'repack' installs their contents
from their temporary location into their permanent one. This is a
semi-involved procedure for each pack, since for each extension (e.g.,
".idx", ".pack", ".mtimes", and so on) we have to either:
- adjust the filemode of the temporary file before renaming it into
place, or
- die() if we are missing a non-optional extension, or
- unlink() any existing file for extensions that we did not generate
(e.g., if a non-cruft pack we generated was identical to, say, a
cruft pack which existed at the beginning of the process, we have to
remove the ".mtimes" file).
Extract this procedure into its own function, and call it
"generated_pack_install"(). This will set us up for pulling this
function out of the builtin entirely and making it part of the repack.h
API, which will be done in a future commit.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The name "generated_pack_data" is somewhat redundant, since the contents
of the struct *is* the data associated with the generated pack.
Rename the structure to just "generated_pack", resulting in less awkward
function names, like "generated_pack_has_ext()" which is preferable to
"generated_pack_data_has_ext()".
Rename a few related functions to align with the convention that
functions to do with a struct "S" should be prefixed with "S_".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The repack builtin defines an API for keeping track of which packs
were found in the repository at the beginning of the repack operation.
This is used to classify what state a pack was in (kept, non-kept, or
cruft), and is also used to mark which packs to delete (or keep) at the
end of a repack operation.
Now that the prerequisite refactoring is complete, this API is isolated
enough that it can be moved out to repack.[ch] and removed from the
builtin entirely.
As a result, some of its functions become static within repack.c,
cleaning up the visible API.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are a couple of spots that cause warnings within the
existing_packs API without DISABLE_SIGN_COMPARE_WARNINGS under
DEVELOPER=1 mode.
In both cases, we have int values that are being compared against size_t
ones. Neither of these two cases are incorrect, and the cast is
completely OK in practice. But both are unnecessary, since:
- in existing_packs_mark_for_deletion_1(), 'hexsz' should be defined as
a size_t anyway, since algop->hexsz is.
- in existing_packs_collect(), 'i' should be defined as a size_t since
it is counting up to the value of a string_list's 'nr' field.
(This patch is a little bit of noise, but I would rather see us squelch
these warnings ahead of moving the existing_packs API into a separate
compilation unit to avoid having to define DISABLE_SIGN_COMPARE_WARNINGS
in repack.c.)
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
builtin/repack.c defines a static "packdir" to instruct pack-objects on
where to write any new packfiles. This is also the directory scanned
when removing any packfiles which were made redundant by the latest
repack.
Prepare to move the "existing_packs_remove_redundant" function to its
own compilation unit by passing in this information as a parameter to
that function.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extract "remove_redundant_pack()" as generic repack-related
functionality by moving its implementation to the repack.[ch]
compilation unit.
This is a prerequisite to moving the "existing_packs" API, which is one
of the callers of this function. (The remaining caller in the pack
geometry code will eventually move to its own compilation unit as well,
and will likewise rely on this function.)
While moving it over, prefix the function name with "repack_" to
indicate that it belongs to the repack-subsystem.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename many of the 'struct existing_packs'-related functions according
to the convention introduced in and described by 541204aabe
(Documentation: document naming schema for structs and their functions,
2024-07-30).
Note that some functions which operate over an individual entry in the
list of existing packs are prefixed with "existing_pack_" instead of the
plural form.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the 'prepare_pack_objects' function no longer refers to
external, static variables, move it out to repack.h as generic
functionality.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The static variable 'delta_base_offset' determines whether or not we
pass the "--delta-base-offset" command-line argument when spawning
pack-objects as a child process. Its introduction dates back to when
repack was rewritten in C, all the way back in a1bbc6c017 (repack:
rewrite the shell script in C, 2013-09-15).
'struct pack_objects_args' was introduced much later on in 4571324b99
(builtin/repack.c: allow configuring cruft pack generation, 2022-05-20),
but did not move the 'delta_base_offset' variable.
Since the 'delta_base_offset' is a property of an individual
pack-objects command, re-introduce that variable as a member of 'struct
pack_objects_args', which will enable further code movement in the
subsequent commits.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A subsequent commit will remove 'delta_base_offset' as a static variable
within builtin/repack.c, and reintroduce it as a member of the 'struct
pack_objects_args'.
As a result, the repack_config callback will need to have both the
cruft- and non-cruft 'struct pack_objects_args's in scope. Introduce a
new 'struct repack_config_ctx' to allow the callee to provide both
pointers to the callback.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Over the years, builtin/repack.c has turned into a grab-bag of
functionality powering the 'git repack' builtin. Among its many
capabilities, it:
- can build and spawn 'git pack-objects' commands, which in turn
generate new packs
- has infrastructure to manage the set of existing packs in a
repository
- has infrastructure to split a sequence of packs into a geometric
progression based on object size
- can manage both generating and combining cruft packs together
- can write new MIDXs
to name a few.
As a result, this builtin has accumulated a lot of code, making adding
new functionality difficult. In the future, 'repack' will learn how to
manage a chain of incremental MIDXs, adding yet more functionality into
the builtin.
As a prerequisite step, let's first move some of the functionality in
the builtin into its own repack.[ch].
This will be done over the course of many steps, since there are many
individual components, some of which will end up in other, yet-to-exist
compilation units of their own. Some of the code movement here is also
non-trivial, so performing it in individual steps will make it easier to
verify.
Let's start by migrating 'struct pack_objects_args' (and the related
corresponding pack_objects_args_release() function) into repack.h, and
teach both the Makefile and Meson how to build the new compilation unit.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In previous commits, we started passing either repository or
git_hash_algo pointers around to various spots within builtin/repack.c
to reduce our dependency on the_repository in the hope of undef'ing
USE_THE_REPOSITORY_VARIABLE.
This commit takes us as far as we can (easily) go in that direction by
removing the only use of a convenience function that only exists when
USE_THE_REPOSITORY_VARIABLE is defined.
Unfortunately, the only other such function is "is_bare_repository()",
which is less than straightforward to convert into, say,
"repo_is_bare()", the latter of the two accepting a repository pointer.
Punt on that for now, and declare this commit as the stopping point for
our efforts in the direction of undef'ing USE_THE_REPOSITORY_VARIABLE.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a similar spirit as previous commits, avoid referring directly to
"the_hash_algo" in builtin/repack.c::finish_pack_objects_cmd() and
instead accept one as a parameter to the function.
Since this function has a number of callers throughout the builtin, the
diff is a little noisier than previous commits. However, each hunk is
limited to passing the hash_algo parameter from a repository pointer
that is already in scope.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a similar spirit as the previous commits, avoid referring directly to
"the_hash_algo" within builtin/repack.c::repack_promisor_objects().
Since there is already a repository pointer in scope, use its hash_algo
value instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a similar spirit as the previous commit, avoid referring directly to
"the_hash_algo" within builtin/repack.c::write_oid().
Unlike the previous commit, we are within a callback function, so must
introduce a new struct to pass additional data through its "data"
pointer.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "mark_packs_for_deletion_1" function uses "the_hash_algo->hexsz" to
isolate a pack's checksum before deleting it to avoid deleting a newly
written pack having the same checksum (that is, some generated pack
wound up identical to an existing pack).
Avoid this by passing down a "struct git_hash_algo" pointer, and refer to
the hash algorithm through it instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pass a "struct repository" pointer to the 'repack_promisor_objects()'
function to avoid using "the_repository".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'remove_redundant_pack()' function uses "the_repository" to obtain,
and optionally remove, the repository's MIDX. Instead of relying on
"the_repository", pass around a "struct repository *" parameter through
its callers, and use that instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid using "the_repository" in various MIDX-related ref snapshotting
functions.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are a number of spots within builtin/repack.c which refer to
"the_repository", and either make use of the "existing packs" API
or otherwise have a 'struct existing_packs *' in scope.
Add a "repo" member to "struct existing_packs" and use that instead of
"the_repository" in such locations.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reduce builtin/repack.c's reliance on `the_repository` by using the
currently-UNUSED "repo" parameter within cmd_repack().
The following commits will continue to reduce the usage of
the_repository in other places within builtin/repack.c.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git format-patch --range-diff=... --notes=..." did not drive the
underlying range-diff with correct --notes parameter, ending up
comparing with different set of notes from its main patch output
you would get from "git format-patch --notes=..." for a singleton
patch.
* kh/format-patch-range-diff-notes:
format-patch: handle range-diff on notes correctly for single patches
revision: add rdiff_log_arg to rev_info
range-diff: rename other_arg to log_arg
|
|
In b0b910e052 (cat-file.c: add batch handling for submodules,
2025-06-02), we began handling submodule entries specially when batching
cat-file like so:
$ echo :sha1collisiondetection | git.compile cat-file --batch-check
855827c583bc30645ba427885caa40c5b81764d2 submodule
Commit b0b910e052 notes that submodules are handled differently than
non-existent objects, which print "<given-name> <type>", since there is
(a) no object to resolve the OID of in the first place, and as commit
b0b910e052 notes, (b) for submodules in particular, it is useful to know
what commit it points at without having to spawn another Git process.
That commit does so by calling report_object_status() and passing in
"oid_to_hex(&data->oid)" for the "obj_name" parameter. This is
unnecessary, however, since report_object_status() will do the same
automatically if given a NULL "obj_name" argument.
That behavior dates back to 6a951937ae (cat-file: add
--batch-all-objects option, 2015-06-22), so rely on that instead of
having the caller open-code that part of report_object_status().
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recently, eaaddf5791 (fast-import: add '--signed-commits=<mode>'
option, 2025-09-17) added support for controlling how signed commits
are handled by `git fast-import`, but there is no option yet to
decide about signed tags.
To remediate that, let's add a '--signed-tags=<mode>' option to
`git fast-import` too.
With this, both `git fast-export` and `git fast-import` have both
a '--signed-tags=<mode>' and a '--signed-commits=<mode>' supporting
the same <mode>s.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently the handle_tag() function in "builtin/fast-export.c" searches
only for "\n-----BEGIN PGP SIGNATURE-----\n" in the tag message to find
a tag signature.
This doesn't handle all kinds of OpenPGP signatures as some can start
with "-----BEGIN PGP MESSAGE-----" too, and this doesn't handle SSH and
X.509 signatures either as they use "-----BEGIN SSH SIGNATURE-----" and
"-----BEGIN SIGNED MESSAGE-----" respectively.
To handle all these kinds of tag signatures supported by Git, let's use
the parse_signed_buffer() function to properly find signatures in tag
messages.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Right now, we have a way to print the storage hash, the input hash, and
the output hash, but we lack a way to print the compatibility hash. Add
a new type to --show-object-format, compat, which prints this value.
If no compatibility hash exists, simply print a newline. This is
important to allow users to use multiple options at once while still
getting unambiguous output.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git reflog write" did not honor the configured user.name/email
which has been corrected.
* ml/reflog-write-committer-info-fix:
builtin/reflog: respect user config in "write" subcommand
|
|
Code clean-up.
* ps/odb-clean-stale-wrappers:
odb: drop deprecated wrapper functions
|
|
Code clean-up around the in-core list of all the pack files and
object database(s).
* ps/packfile-store:
packfile: refactor `get_packed_git_mru()` to work on packfile store
packfile: refactor `get_all_packs()` to work on packfile store
packfile: refactor `get_packed_git()` to work on packfile store
packfile: move `get_multi_pack_index()` into "midx.c"
packfile: introduce function to load and add packfiles
packfile: refactor `install_packed_git()` to work on packfile store
packfile: split up responsibilities of `reprepare_packed_git()`
packfile: refactor `prepare_packed_git()` to work on packfile store
packfile: reorder functions to avoid function declaration
odb: move kept cache into `struct packfile_store`
odb: move MRU list of packfiles into `struct packfile_store`
odb: move packfile map into `struct packfile_store`
odb: move initialization bit into `struct packfile_store`
odb: move list of packfiles into `struct packfile_store`
packfile: introduce a new `struct packfile_store`
|
|
The "do you still use it?" message given by a command that is
deeply deprecated and allow us to suggest alternatives has been
updated.
* kh/you-still-use-whatchanged-fix:
BreakingChanges: remove claim about whatchanged reports
whatchanged: remove not-even-shorter clause
whatchanged: hint about git-log(1) and aliasing
you-still-use-that??: help the user help themselves
t0014: test shadowing of aliases for a sample of builtins
git: allow alias-shadowing deprecated builtins
git: move seen-alias bookkeeping into handle_alias(...)
git: add `deprecated` category to --list-cmds
Makefile: don’t add whatchanged after it has been removed
|
|
The use of "git config get" command to learn how ANSI color
sequence is for a particular type, e.g., "git config get
--type=color --default=reset no.such.thing", isn't very ergonomic.
* ps/config-get-color-fixes:
builtin/config: do not spawn pager when printing color codes
builtin/config: special-case retrieving colors without a key
builtin/config: do not die in `get_color()`
t1300: small style fixups
t1300: write test expectations in the test's body
|
|
"git fast-import" learned that "--signed-commits=<how>" option that
corresponds to that of "git fast-export".
* cc/fast-import-strip-signed-commits:
fast-import: add '--signed-commits=<mode>' option
gpg-interface: refactor 'enum sign_mode' parsing
|
|
"git refs optimize" is added for not very well explained reason
despite it does the same thing as "git pack-refs"...
* ms/refs-optimize:
t: add test for git refs optimize subcommand
t0601: refactor tests to be shareable
builtin/refs: add optimize subcommand
doc: pack-refs: factor out common options
builtin/pack-refs: factor out core logic into a shared library
builtin/pack-refs: convert to use the generic refs_optimize() API
reftable-backend: implement 'optimize' action
files-backend: implement 'optimize' action
refs: add a generic 'optimize' API
|
|
The work to build on the bulk-checkin infrastructure to create many
objects at once in a transaction and to abstract it into the
generic object layer continues.
* jt/odb-transaction:
odb: add transaction interface
object-file: update naming from bulk-checkin
object-file: relocate ODB transaction code
bulk-checkin: drop flush_odb_transaction()
builtin/update-index: end ODB transaction when --verbose is specified
bulk-checkin: remove ODB transaction nesting
|
