| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When 0 <= i < xdfile_t.nreff the following is true:
xdfile_t.ha[i] == xdfile_t.recs[xdfile_t.rindex[i]]
This makes the code about 5% slower. The fields rindex and ha are
specific to the classic diff (myers and minimal). I plan on creating a
struct for classic diff, but there's a lot of cleanup that needs to be
done before that can happen and leaving ha in would make those cleanups
harder to follow.
A subsequent commit will delete the chastore cha from xdfile_t. That
later commit will investigate deleting ha and cha independently and
together.
Signed-off-by: Ezekiel Newren <ezekielnewren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Every field in this struct is an alias for a certain field in xdfile_t.
diffdata_t.nrec -> xdfile_t.nreff
diffdata_t.ha -> xdfile_t.ha
diffdata_t.rindex -> xdfile_t.rindex
diffdata_t.rchg -> xdfile_t.rchg
I think this struct existed before xdfile_t, and was kept for backward
compatibility reasons. I think xdiffi should have been refactored to
use the new (xdfile_t) struct, but was easier to alias it instead.
The local variables rchg* and rindex* don't shorten the lines by much,
nor do they really need to be there to make the code more readable.
Delete them.
Signed-off-by: Ezekiel Newren <ezekielnewren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the type xrecord_t as the local variable for the functions in the
file xdiff/xemit.c. Most places directly reference the fields inside of
this struct, doing that here makes it more consistent with the rest of
the code.
Signed-off-by: Ezekiel Newren <ezekielnewren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When xrecord_t was a linked list, and recs didn't exist, I assume this
function walked the list until it found the right record. Accessing
a contiguous array is so trivial that this function is now superfluous.
Delete it.
Signed-off-by: Ezekiel Newren <ezekielnewren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
gitk currently accepts a single themeloader file via the config file,
and will source this with errors reported to the console. This is fine
for simple configuration, but will not support interactive theme
exploration from the gui. In particular, a themeloader file must be
sourced only once as the themes defined cannot be re-defined. Also,
errors must be handled rather than just aborting while printing to the
console. So, add a proc to handle the above, supporting expansion of
the gui config pages.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
|
|
gitk has a number of variables used in setting up colors for the classic
(non-themed) widget set. These variables are unused with ttk, so let's
eliminate them. But, leave the variables in the config file for now -
those can be eliminated after this change is merged.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
|
|
gitk offers to change the ui color on the colors prefs page, but the
variable set has no effect because gitk is using themes. Let's eliminate
the "Interface" color selection option from that page.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
|
|
gitk allows searching for commits with various criteria, and provides
up/down search buttons to facilitate this search. These buttons are
labelled with bitmaps, and those bitmaps are not always recolored
correctly for the ui scheme as the theme colors are not known. Let's
just use text labels on these, allowing the styles to handle any
coloring needed. Use utf codepoints for the arrows, presuming that these
code points are available in the selected font.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
|
|
gitk maintains a stack of commit ids visited, and allows navigating
these using a pair of buttons shown with arrows using bitmaps. An attempt
is made to recolor these bitmaps to handle different color schemes, but
this is unreliable across multiple themes as the required colors are not
universally known. Let's just use text labels for these buttons,
allowing the themes to recolor the text along with everything else. Use
utf code points for the text, presuming that these arrow glyphs are
available in the selected font.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
|
|
gitk uses themed widgets with a user selected theme, but also invokes
tk_setPalette to configure colors for the non-themed widgets including
the menubar. However, themes in general are expected to configure
those colors already. The builtin themes (default, alt, clam, classic on
unix/X11) all have compatible colors, and need no such reconfiguration,
and (most, if not all) available themes set the options database for this
purpose as well. Furthermore, gitk in the past avoided invoking
tk_setPalette on Windows to avoid some issues.
So, let's stop calling tk_setPalette everywhere, and just rely upon the
selected theme (possibly user installed) to have set all needed colors.
Note: if a user installs more than one theme using $themeloader, the last
one installed will have defined the colors to be used. Those colors will
probably be incorrect for any other set, including Tk's builtin set.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
|
|
gitk uses themed tk, but has no capability to alter the theme defined
by Tk. While there are documented ways to install other themes, and
to make one the default, these methods are obscure at best. Instead,
let's offer two config variables:
- theme this is the name of the theme to use, and must be available.
- themeloader - this is the full pathname of a tcl script that
will load one or more themes into the Tk namespace.
By default, theme is set to the theme active when Tk is started, and
themeloader = {}. These variables must be defined to something else to
have any user visible effect.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
|
|
All the final paragraphs on these three options are rendered as
literal blocks. The intent was surely to keep each of them wed to their
respective description list items. But the attempt at maintaining the
indentation level of the block causes each them to be interpreted as a
code block, since code blocks can be represented using indentation.
We need to use list continuation (+) in order to keep them wed to
their blocks.
There is also an unordered list which sandwiches two paragraphs on an
option. We don’t need to do anything about that since it attaches to the
description list item without list continuation (i.e. it is already
correct). But for consistency let’s use list continuation and an open
block on it.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These tests prepare the working tree & index state to have something
to be committed, and try a sequence of "test_must_fail git commit".
If an earlier one did not fail by a bug, a later one will fail for
a wrong reason (namely, "nothing to commit").
Give them "--allow-empty" to make sure that they would work even
when there is nothing to commit by accident.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: D. Ben Knoble <ben.knoble+github@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The formatter currently suggests adding a space between a control macro
and parentheses. In the Git project, this is not typically expected. Set
`SpaceBeforeParens` to `ControlStatementsExceptControlMacros`
accordingly.
Helped-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Asciidoctor and asciidoc.py have different behaviors when a paragraph
follows a nested list item. Asciidoctor has a bug[1] that makes it keep a
plus sign (+) used to attached paragraphs at the beginning of the paragraph.
This commit uses workarounds to avoid this problem by using second level
definition lists and open blocks.
[1]:https://github.com/asciidoctor/asciidoctor/issues/4704
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
xrecord_t.next, xdfile_t.hbits, xdfile_t.rhash are initialized,
but never used for anything by the code. Remove them.
Best-viewed-with: --color-words
Signed-off-by: Ezekiel Newren <ezekielnewren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These local variables are essentially a hand-rolled additional
implementation of xdl_free_ctx() inlined into xdl_prepare_ctx(). Modify
the code to use the existing xdl_free_ctx() function so there aren't
two ways to free such variables.
Signed-off-by: Ezekiel Newren <ezekielnewren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move xdl_prepare_env() later in the file to avoid the need
for static forward declarations.
Best-viewed-with: --color-moved
Signed-off-by: Ezekiel Newren <ezekielnewren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the recent update in Git for Windows/ARM64 as of
https://github.com/git-for-windows/git-sdk-arm64/commit/21b288e16358
cURL was updated from v8.15.0 to v8.16.0, and the LLVM-based builds (but
strangely not the GCC-based builds) continuously greet me thusly:
http-push.c:211:2: error: call to '_curl_easy_setopt_err_long' declared
with 'warning' attribute: curl_easy_setopt expects a long argument
[-Werror,-Wattribute-warning]
CC builtin/apply.o
211 | curl_easy_setopt(curl, CURLOPT_INFILESIZE, buffer->buf.len);
| ^
C:/a/git-sdk-arm64/git-sdk-arm64/minimal-sdk/clangarm64/include/curl/typecheck-gcc.h:50:15:
note: expanded from macro 'curl_easy_setopt'
50 | _curl_easy_setopt_err_long(); \
| ^
1 error generated.
make: *** [Makefile:2877: http-push.o] Error 1
The easiest way to shut up that compile error (which is legitimate,
seeing as the `CURLOPT_INFILESIZE` options expects a `long` parameter,
but `buffer->buf.len` refers to the `size_t` attribute of a `strbuf`)
would be to simply cast the parameter to a `long`.
However, there is a much better solution: To use the
`CURLOPT_INFILESIZE_LARGE` option instead, which was added in cURL
v7.11.0 (see https://curl.se/ch/7.11.0.html) and which Git _already_
uses in `curl_append_msgs_to_imap()`.
This fix was the motivation for renaming `xcurl_off_t()` to
`cast_size_t_to_curl_off_t()` and making it available more broadly,
which is the reason why it is used here, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When casting a `size_t` to `curl_off_t`, there is a currently uncommon
chance that the value can be cut off (`curl_off_t` is expected to be a
signed 64-bit data type).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This commit moves the `xcurl_off_t()` function, which validates that a
given value fits within the `curl_off_t` data type and then casts it, to
a more central place so that it can be used outside of `remote-curl.c`,
too.
At the same time, this function is renamed to conform better with the
naming convention of the helper functions that safely cast from one data
type to another which has been well established in `git-compat-util.h`.
With this move, `gettext.h` must be `#include`d in `http.h` to allow the
error message to remain translatable.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
gitk's 'Commit ID' button uses a classic widget, not a themed one,
leading to inconsistent style. Commit 51a7e8b654 (d93f1713b0 ("gitk: Use
themed tk widgets", 2009-04-17) that added themed widgets did not touch
this particular widget, but does not say why. Regardless, let's use a
themed button to be consistent with the rest of the interface.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
|
|
If one of the two provided paths for git diff --no-index ends in a '/',
a failure similar to the following occurs:
$ git diff --no-index -- /tmp/ /tmp/ ':!'
fatal: `pos + len' is too far after the end of the buffer
This occurs because of an incorrect calculation of the skip lengths in
diff_no_index(). The code wants to calculate the length of the string,
but add one in case the string doesn't end with a slash.
The method it uses is incorrect, as it always checks the trailing NUL
character of the string. This will never be a '/', so we always add one.
In the event that we *do* have a trailing slash, this will create an
off-by-one length error later when using the skip value.
The most straightforward fix would be to correct the skip1 and skip2
lengths by using ends_with().
However, Johannes made a good point that the existing logic is wasting a
lot of computation. We generate the match string by copying the path in
and then skipping almost all of it immediately with a potentially
expensive memmove() from the strbuf_remove() call. We also re-initialize
the match stringbuf each time we call read_directory_contents.
The read_directory_contents really wants a path that is rooted at the
start of the directory scan. We're currently building this by taking the
full path and stripping out the start portion. Instead, replace this
logic by building up the portion of the match as we go.
Start by initializing two strbuf in diff_no_index containing the empty
string. Pass these into queue_diff, which in turn passes the appropriate
left or right side into read_directory_contents.
As before, we build up the matches by appending elements to the match
path and then clearing them using strbuf_setlen.
In the recursive portion of the queue_diff algorithm, we build up new
match paths the same way that we build up new buffer paths, by appending
the elements and then clearing them with strbuf_setlen after each
iteration. This is cheaper as it avoids repeated allocations, and is a
bit simpler to track what is going on.
Add a couple of test cases that pass in paths already ending in '/', to
ensure the tests cover this regression.
Reported-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Closes: https://lore.kernel.org/git/c75ec5f9-407a-6555-d4fb-bb629d54ec61@gmx.de/
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
[jc: small leakfixes at the end of diff_no_index()]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
(The two next paragraphs are taken from the previous commit.)
git-format-patch(1) supports Git notes by showing them beneath the
patch/commit message, similar to git-log(1). The command also supports
showing those same notes ref names in the range diff output.
Note *the same* ref names; any Git notes options or configuration
variables need to be handed off to the range-diff machinery. This works
correctly in the case when the range diff is on the cover letter. But it
does not work correctly when the output is a single patch with an
embedded range diff.
Concretely, git-format-patch(1) needs to pass `--[no-]notes` options on
to the range-diff subprocess in `range-diff.c`. Range diffs for single-
commit series are handled in `log-tree.c`. But `log-tree.c` had no
access to any `log_arg` variable before we added it to `rev_info` in the
previous commit.
Use that new struct member to fix this inconsistency.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-format-patch(1) supports Git notes by showing them beneath the
patch/commit message, similar to git-log(1). The command also supports
showing those same notes ref names in the range diff output.
Note *the same* ref names; any Git notes options or configuration
variables need to be handed off to the range-diff machinery. This works
correctly in the case when the range diff is on the cover letter. But it
does not work correctly when the output is a single patch with an
embedded range diff.
Concretely, git-format-patch(1) needs to pass `--[no-]notes` options
on to the range-diff subprocess in `range-diff.c`. This is handled in
`builtin/log.c` by the local variable `log_arg` in the case of mul-
tiple commits, but not in the single commit case where there is no
cover letter and the range diff is embedded in the patch output; the
range diff is then made in `log-tree.c`, whither `log_arg` has not
been propagated. This means that the range-diff subprocess reverts
to its default behavior, which is to act like git-log(1) w.r.t. notes.
We need to fix this. But first lay the groundwork by converting
`log_arg` to a struct member; next we can simply use that member
in `log-tree.c` without having to thread it from `builtin/log.c`.
No functional changes.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename `other_arg` to `log_arg` in `range_diff_options` and
related places.
“Other argument” comes from bd361918 (range-diff: pass through --notes
to `git log`, 2019-11-20) which introduced Git notes handling to
git-range-diff(1) by passing that option on to git-log(1). And that kind
of name might be fine in a local context. However, it was initially
spread among multiple files, and is now[1] part of the
`range_diff_options` struct. It is, prima facie, difficult to guess what
“other” means, especially when just looking at the struct.
But with a little reading we find out that it is used for `--[no-]notes`
and `--diff-merges`, which are both passed on to git-log(1). We should
just rename it to reflect this role; `log_arg` suggests, along with the
`strvec` type, that it is used to pass extra arguments to git-log(1).
† 1: since f1ce6c19 (range-diff: combine all options in a single data
structure, 2021-02-05)
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If, when the user edits a hunk, they change deletion lines into
context lines or vice versa, then the number of hunks that the edited
hunk can be split into may differ from the unedited hunk. This means
that so we should recalculate `hunk->splittable_into` after the hunk
has been edited. In practice users are unlikely to hit this bug as it
is doubtful that a user who has edited a hunk will split it afterwards.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a hunk is split, each of the new hunks inherits whether it is
selected or not from the original hunk. If a selected hunk is split
all of the new hunks are marked as "selected" and the user is only
prompted with the first of the split hunks. The user is not asked
whether or not they wish to select the rest of the new hunks. This
means that if they wish to deselect any of the new hunks apart from
the first one they have to navigate back to the hunk they want to
deselect before they can deselect it. This is unfortunate as the user
is presumably splitting the original hunk because they only want to
select some sub-set of it.
Instead mark all the new hunks as "undecided" so that the user is
prompted whether they wish to select each one in turn. In the case
where the user only wants to change the selection of the first of
the split hunks they will now have to do more work re-selecting the
remaining split hunks. However, changing the selection of any of the
other newly created hunks is now much simpler as the user no-longer has
to navigate back to them in order to change their selected state.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
gitk uses classic (non-themed) spinboxes rather than the ttk variants.
Commit d93f1713b0 ("gitk: Use themed tk widgets", 2009-04-17) that added
ttk makes no mention of why ttk:spinboxes were omitted, but this leads
to an inconsistent interface. Let's use the ttk version.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
|
|
From user feedback, there was a request for examples, as well as a
comment that one person found "If git push [<repository>] without
any <refspec> argument is set to update some ref at the destination
with <src> with remote.<repository>.push configuration variable..."
impossible to understand.
To make the section easier to navigate, create a list of every possible
refspec form, with examples for each form as well as 2 forms which were
previously missing (patterns and negative refspecs).
Made a few changes to use more familiar language, but ultimately
refspecs are a pretty advanced feature so I've mostly left the
terminology alone.
Signed-off-by: Julia Evans <julia@jvns.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Right now the rules for when a `git push` is allowed are buried at the
bottom of the description of `<refspec>`. Put them in their own section
so that we can reference them from `--force` and give some context for
why they exist.
Having the "PUSH RULES" section also lets us be a little bit more
specific with the rule in `--force`: we can just focus on the rule
for pushing for a branch (which is likely the one that's most relevant)
and leave the details about what happens when you push to a tag or a ref
that isn't a branch to the later section.
Signed-off-by: Julia Evans <julia@jvns.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `get_packed_git_mru()` function prepares the packfile store and then
returns its packfiles in most-recently-used order. Refactor it to accept
a packfile store instead of a repository to clarify its scope.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `get_all_packs()` function prepares the packfile store and then
returns its packfiles. Refactor it to accept a packfile store instead of
a repository to clarify its scope.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `get_packed_git()` function prepares the packfile store and then
returns its packfiles. Refactor it to accept a packfile store instead of
a repository to clarify its scope.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `get_multi_pack_index()` function is declared and implemented in the
packfile subsystem, even though it really belongs into the multi-pack
index subsystem. The reason for this is likely that it needs to call
`packfile_store_prepare()`, which is not exposed by the packfile system.
In a subsequent commit we're about to add another caller outside of the
packfile system though, so we'll have to expose the function anyway.
Do so now already and move `get_multi_pack_index()` into the MIDX
subsystem.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have a recurring pattern where we essentially perform an upsert of a
packfile in case it isn't yet known by the packfile store. The logic to
do so is non-trivial as we have to reconstruct the packfile's key, check
the map of packfiles, then create the new packfile and finally add it to
the store.
Introduce a new function that does this dance for us. Refactor callsites
to use it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `install_packed_git()` functions adds a packfile to a specific
object store. Refactor it to accept a packfile store instead of a
repository to clarify its scope.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `reprepare_packed_git()` we perform a couple of operations:
- We reload alternate object directories.
- We clear the loose object cache.
- We reprepare packfiles.
While the logic is hosted in "packfile.c", it clearly reaches into other
subsystems that aren't related to packfiles.
Split up the responsibility and introduce `odb_reprepare()` which now
becomes responsible for repreparing the whole object database. The
existing `reprepare_packed_git()` function is refactored accordingly and
only cares about reloading the packfile store now.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `prepare_packed_git()` function and its friends are responsible for
loading packfiles as well as the multi-pack index for a given object
database. Refactor these functions to accept a packfile store instead of
a repository to clarify their scope.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reorder functions so that we can avoid a forward declaration of
`prepare_packed_git()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The object database tracks a cache of "kept" packfiles, which is used by
git-pack-objects(1) to handle cruft objects. With the introduction of
the `struct packfile_store` we have a better place to host this cache
though.
Move the cache accordingly.
This moves the last bit of packfile-related state from the object
database into the packfile store. Adapt the comment for the `packfiles`
pointer in `struct object_database` to reflect this.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The object database tracks the list of packfiles in most-recently-used
order, which is mostly used to favor reading from packfiles that contain
most of the objects that we're currently accessing. With the
introduction of the `struct packfile_store` we have a better place to
host this list though.
Move the list accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The object database tracks a map of packfiles by their respective paths,
which is used to figure out whether a given packfile has already been
loaded. With the introduction of the `struct packfile_store` we have a
better place to host this list though.
Move the map accordingly.
`pack_map_entry_cmp()` isn't used anywhere but in "packfile.c" anymore
after this change, so we convert it to a static function, as well. Note
that we also drop the `inline` hint: the function is used as a callback
function exclusively, and callbacks cannot be inlined.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The object database knows to skip re-initializing the list of packfiles
in case it's already been initialized. Whether or not that is the case
is tracked via a separate `initialized` bit that is stored in the object
database. With the introduction of the `struct packfile_store` we have a
better place to host this bit though.
Move it accordingly. While at it, convert the field into a boolean now
that we're allowed to use them in our code base.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The object database tracks the list of packfiles it currently knows
about. With the introduction of the `struct packfile_store` we have a
better place to host this list though.
Move the list accordingly. Extract the logic from `odb_clear()` that
knows to close all such packfiles and move it into the new subsystem, as
well.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Information about an object database's packfiles is currently
distributed across two different structures:
- `struct packed_git` contains the `next` pointer as well as the
`mru_head`, both of which serve to store the list of packfiles.
- `struct object_database` contains several fields that relate to the
packfiles.
So we don't really have a central data structure that tracks our
packfiles, and consequently responsibilities aren't always clear cut.
A consequence for the upcoming pluggable object databases is that this
makes it very hard to move management of packfiles from the object
database level down into the object database source.
Introduce a new `struct packfile_store` which is about to become the
single source of truth for managing packfiles. Right now this data
structure doesn't yet contain anything, but in subsequent patches we
will move all data structures that relate to packfiles and that are
currently contained in `struct object_database` into this new home.
Note that this is only a first step: most importantly, we won't (yet)
move the `struct packed_git::next` pointer around. This will happen in a
subsequent patch series though so that `struct packed_git` will really
only host information about the specific packfile it represents.
Further note that the new structure still sits at the wrong level at the
end of this patch series: as mentioned, it should eventually sit at the
level of the object database source, not at the object database level.
But introducing the packfile store now already makes it way easier to
eventually push down the now-selfcontained data structure by one level.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In an argc/argv pair, the entry for argv[argc] is generally NULL. You
can iterate by counting up to argc, or by looking for the NULL entry in
argv.
When we pass such a pair to setup_revisions(), it shrinks argc to
account for the options we consumed and returns the result to the
caller. But it doesn't touch the entries after the reduced argc. So
argv[argc] will be left pointing at some arbitrary entry rather than
NULL.
This isn't the source of any known bugs, since all callers are aware of
the limitation and act accordingly. But it's a possible gotcha that may
be easy to miss.
Let's set the new argv[argc] to NULL, taking care to free it if the
caller asked us to do so.
It is tempting to do likewise for all of the entries afterwards, too, as
some of them may also need to be freed (e.g., if coming from a strvec).
But doing so isn't entirely trivial, as we munge argc in the function
(e.g., when we find "--" and move all of the entries after it into the
prune_data list). It would be possible with some light refactoring, but
it's probably not worth it. Nobody should ever look at them (they are
beyond the revised argc and past the NULL argv entry) outside of strvec
cleanup, and setup_revisions_from_strvec() already handles this case.
There's one other interesting gotcha: many callers which do not want to
provide arguments just pass 0/NULL for argc/argv. We need to check for
this case before assigning the final NULL.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commit converted callers of setup_revisions() with a strvec
to use the safer and easier _from_strvec() variant.
Let's now convert spots that don't directly have a strvec, but receive
an argc/argv pair that eventually comes from one. We'll instead pass the
strvec down to the point where we call setup_revisions().
That makes these functions slightly less flexible if they were to grow
other callers that don't use strvecs, but this rigidity is buying us
some safety. It is only safe to pass the free_removed_argv_elements
option to setup_revisions() if we know the elements of argv/argc are
allocated on the heap. That isn't communicated in the type system when
we are passed the bare elements. But if we get a strvec, we know that
the elements are allocated strings.
And at any rate, each of these modified functions has only a single
caller (that has a strvec), so the loss of flexibility is unlikely to
ever matter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
