| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The "files" backend explicitly carves out special logic for its initial
transaction so that it can avoid writing out every single reference as
a loose reference. While the assumption is that there shouldn't be any
preexisting references, we still have to verify that none of the newly
written references will conflict with any other new reference in the
same transaction.
Refactor the initial transaction to use batched refname availability
checks. This does not yet have an effect on performance as we still call
`refs_verify_refname_available()` in a loop. But this will change in
subsequent commits and then impact performance when cloning a repository
with many references or when migrating references to the "files" format.
This will improve performance when cloning a repository with many
references or when migrating references from any format to the "files"
format once the availability checks have learned to optimize checks for
many references in a subsequent commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Same as the "reftable" backend that we have adapted in the preceding
commit to use batched refname availability checks we can also do so for
the "files" backend. Things are a bit more intricate here though, as we
call `refs_verify_refname_available()` in a set of different contexts:
1. `lock_raw_ref()` when it hits either EEXISTS or EISDIR when creating
a new reference, mostly to create a nice, user-readable error
message. This is nothing we have to care about too much, as we only
hit this code path at most once when we hit a conflict.
2. `lock_raw_ref()` when it _could_ create the lockfile to check
whether it is conflicting with any packed refs. In the general case,
this code path will be hit once for every (successful) reference
update.
3. `lock_ref_oid_basic()`, but it is only executed when copying or
renaming references or when expiring reflogs. It will thus not be
called in contexts where we have many references queued up.
4. `refs_refname_ref_available()`, but again only when copying or
renaming references. It is thus not interesting due to the same
reason as the previous case.
5. `files_transaction_finish_initial()`, which is only executed when
creating a new repository or migrating references.
So out of these, only (2) and (5) are viable candidates to use the
batched checks.
Adapt `lock_raw_ref()` accordingly by queueing up reference names that
need to be checked for availability and then checking them after we have
processed all updates. This check is done before we (optionally) lock
the `packed-refs` file, which is somewhat flawed because it means that
the `packed-refs` could still change after the availability check and
thus create an undetected conflict. But unconditionally locking the file
would change semantics that users are likely to rely on, so we keep the
current locking sequence intact, even if it's suboptmial.
The refactoring of `files_transaction_finish_initial()` will be done in
the next commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `null_oid()` function returns the object ID that only consists of
zeroes. Naturally, this ID also depends on the hash algorithm used, as
the number of zeroes is different between SHA1 and SHA256. Consequently,
the function returns the hash-algorithm-specific null object ID.
This is currently done by depending on `the_hash_algo`, which implicitly
makes us depend on `the_repository`. Refactor the function to instead
pass in the hash algorithm for which we want to retrieve the null object
ID. Adapt callsites accordingly by passing in `the_repository`, thus
bubbling up the dependency on that global variable by one layer.
There are a couple of trivial exceptions for subsystems that already got
rid of `the_repository`. These subsystems instead use the repository
that is available via the calling context:
- "builtin/grep.c"
- "grep.c"
- "refs/debug.c"
There are also two non-trivial exceptions:
- "diff-no-index.c": Here we know that we may not have a repository
initialized at all, so we cannot rely on `the_repository`. Instead,
we adapt `diff_no_index()` to get a `struct git_hash_algo` as
parameter. The only caller is located in "builtin/diff.c", where we
know to call `repo_set_hash_algo()` in case we're running outside of
a Git repository. Consequently, it is fine to continue passing
`the_repository->hash_algo` even in this case.
- "builtin/ls-files.c": There is an in-flight patch series that drops
`USE_THE_REPOSITORY_VARIABLE` in this file, which causes a semantic
conflict because we use `null_oid()` in `show_submodule()`. The
value is passed to `repo_submodule_init()`, which may use the object
ID to resolve a tree-ish in the superproject from which we want to
read the submodule config. As such, the object ID should refer to an
object in the superproject, and consequently we need to use its hash
algorithm.
This means that we could in theory just not bother about this edge
case at all and just use `the_repository` in "diff-no-index.c". But
doing so would feel misdesigned.
Remove the `USE_THE_REPOSITORY_VARIABLE` preprocessor define in
"hash.c".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the preceding refactorings we now only have a couple of implicit
users of `the_repository` left in the "path" subsystem, all of which
depend on global state via `calc_shared_perm()`. Make the dependency on
`the_repository` explicit by passing the repo as a parameter instead and
adjust callers accordingly.
Note that this change bubbles up into a couple of subsystems that were
previously declared as free from `the_repository`. Instead of marking
all of them as `the_repository`-dependent again, we instead use the
repository that is available in the calling context. There are three
exceptions though with "copy.c", "pack-write.c" and "tempfile.c".
Adjusting these would require us to adapt callsites all over the place,
so this is left for a future iteration.
Mark "path.c" as free from `the_repository`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
reflog entries for symbolic ref updates were broken, which has been
corrected.
* kn/reflog-symref-fix:
refs: fix creation of reflog entries for symrefs
|
|
The commit 297c09eabb (refs: allow multiple reflog entries for the
same refname, 2024-12-16) added logic to exit early in
`lock_ref_for_update()` after obtaining the required lock. This was
added as a performance optimization on a false assumption that no
further processing was required for reflog-only updates.
However the assumption was wrong. For a symref's reflog entry, the
update needs to be populated with the old_oid value, but the early
exit skipped this necessary step.
This caused a bug in Git 2.48 in the files backend where target
references of symrefs being updated would create a corrupted reflog
entry for the symref since the old_oid is not populated.
Everything the early exit skipped in the code path is necessary for
both regular and symbolic ref, so eliminate the mistaken
optimization, and also add a test to ensure that such an issue
doesn't arise in the future.
Reported-by: Nika Layzell <nika@thelayzells.com>
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git refs migrate" learned to also migrate the reflog data across
backends.
* kn/reflog-migration:
refs: mark invalid refname message for translation
refs: add support for migrating reflogs
refs: allow multiple reflog entries for the same refname
refs: introduce the `ref_transaction_update_reflog` function
refs: add `committer_info` to `ref_transaction_add_update()`
refs: extract out refname verification in transactions
refs/files: add count field to ref_lock
refs: add `index` field to `struct ref_udpate`
refs: include committer info in `ref_update` struct
|
|
Start working to make the codebase buildable with -Wsign-compare.
* ps/build-sign-compare:
t/helper: don't depend on implicit wraparound
scalar: address -Wsign-compare warnings
builtin/patch-id: fix type of `get_one_patchid()`
builtin/blame: fix type of `length` variable when emitting object ID
gpg-interface: address -Wsign-comparison warnings
daemon: fix type of `max_connections`
daemon: fix loops that have mismatching integer types
global: trivial conversions to fix `-Wsign-compare` warnings
pkt-line: fix -Wsign-compare warning on 32 bit platform
csum-file: fix -Wsign-compare warning on 32-bit platform
diff.h: fix index used to loop through unsigned integer
config.mak.dev: drop `-Wno-sign-compare`
global: mark code units that generate warnings with `-Wsign-compare`
compat/win32: fix -Wsign-compare warning in "wWinMain()"
compat/regex: explicitly ignore "-Wsign-compare" warnings
git-compat-util: introduce macros to disable "-Wsign-compare" warnings
|
|
When "git fetch $remote" notices that refs/remotes/$remote/HEAD is
missing and discovers what branch the other side points with its
HEAD, refs/remotes/$remote/HEAD is updated to point to it.
* bf/set-head-symref:
fetch set_head: handle mirrored bare repositories
fetch: set remote/HEAD if it does not exist
refs: add create_only option to refs_update_symref_extended
refs: add TRANSACTION_CREATE_EXISTS error
remote set-head: better output for --auto
remote set-head: refactor for readability
refs: atomically record overwritten ref in update_symref
refs: standardize output of refs_read_symbolic_ref
t/t5505-remote: test failure of set-head
t/t5505-remote: set default branch to main
|
|
The reference transaction only allows a single update for a given
reference to avoid conflicts. This, however, isn't an issue for reflogs.
There are no conflicts to be resolved in reflogs and when migrating
reflogs between backends we'd have multiple reflog entries for the same
refname.
So allow multiple reflog updates within a single transaction. Also the
reflog creation logic isn't exposed to the end user. While this might
change in the future, currently, this reduces the scope of issues to
think about.
In the reftable backend, the writer sorts all updates based on the
update_index before writing to the block. When there are multiple
reflogs for a given refname, it is essential that the order of the
reflogs is maintained. So add the `index` value to the `update_index`.
The `index` field is only set when multiple reflog entries for a given
refname are added and as such in most scenarios the old behavior
remains.
This is required to add reflog migration support to `git refs migrate`.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a new function `ref_transaction_update_reflog`, for clients to
add a reflog update to a transaction. While the existing function
`ref_transaction_update` also allows clients to add a reflog entry, this
function does a few things more, It:
- Enforces that only a reflog entry is added and does not update the
ref itself.
- Allows the users to also provide the committer information. This
means clients can add reflog entries with custom committer
information.
The `transaction_refname_valid()` function also modifies the error
message selectively based on the type of the update. This change also
affects reflog updates which go through `ref_transaction_update()`.
A follow up commit will utilize this function to add reflog support to
`git refs migrate`.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `ref_transaction_add_update()` creates the `ref_update` struct. To
facilitate addition of reflogs in the next commit, the function needs to
accommodate setting the `committer_info` field in the struct. So modify
the function to also take `committer_info` as an argument and set it
accordingly.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When refs are updated in the files-backend, a lock is obtained for the
corresponding file path. This is the case even for reflogs, i.e. a lock
is obtained on the reference path instead of the reflog path. This
works, since generally, reflogs are updated alongside the ref.
The upcoming patches will add support for reflog updates in ref
transaction. This means, in a particular transaction we want to have ref
updates and reflog updates. For a given ref in a given transaction there
can be at most one update. But we can theoretically have multiple reflog
updates for a given ref in a given transaction. A great example of this
would be when migrating reflogs from one backend to another. There we
would batch all the reflog updates for a given reference in a single
transaction.
The current flow does not support this, because currently refs & reflogs
are treated as a single entity and capture the lock together. To
separate this, add a count field to ref_lock. With this, multiple
updates can hold onto a single ref_lock and the lock will only be
released when all of them release the lock.
This patch only adds the `count` field to `ref_lock` and adds the logic
to increment and decrement the lock. In a follow up commit, we'll
separate the reflog update logic from ref updates and utilize this
functionality.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The reference backends obtain the committer information from
`git_committer_info(0)` when adding a reflog. The upcoming patches
introduce support for migrating reflogs between the reference backends.
This requires an interface to creating reflogs, including custom
committer information.
Add a new field `committer_info` to the `ref_update` struct, which is
then used by the reference backends. If there is no `committer_info`
provided, the reference backends default to using
`git_committer_info(0)`. The field itself cannot be set to
`git_committer_info(0)` since the values are dynamic and must be
obtained right when the reflog is being committed.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fsck" learned to issue warnings on "curiously formatted" ref
contents that have always been taken valid but something Git
wouldn't have written itself (e.g., missing terminating end-of-line
after the full object name).
* sj/ref-contents-check:
ref: add symlink ref content check for files backend
ref: check whether the target of the symref is a ref
ref: add basic symref content check for files backend
ref: add more strict checks for regular refs
ref: port git-fsck(1) regular refs check for files backend
ref: support multiple worktrees check for refs
ref: initialize ref name outside of check functions
ref: check the full refname instead of basename
ref: initialize "fsck_ref_report" with zero
|
|
Currently there is only one special error for transaction, for when
there is a naming conflict, all other errors are dumped under a generic
error. Add a new special error case for when the caller requests the
reference to be updated only when it does not yet exist and the
reference actually does exist.
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the symbolic reference we want to read with refs_read_symbolic_ref
is actually not a symbolic reference, the files and the reftable
backends return different values (1 and -1 respectively). Standardize
the returned values so that 0 is success, -1 is a generic error and -2
is that the reference was actually non-symbolic.
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Besides the textual symref, we also allow symbolic links as the symref.
So, we should also provide the consistency check as what we have done
for textual symref. And also we consider deprecating writing the
symbolic links. We first need to access whether symbolic links still
be used. So, add a new fsck message "symlinkRef(INFO)" to tell the
user be aware of this information.
We have already introduced "files_fsck_symref_target". We should reuse
this function to handle the symrefs which use legacy symbolic links. We
should not check the trailing garbage for symbolic refs. Add a new
parameter "symbolic_link" to disable some checks which should only be
executed for textual symrefs.
And we need to also generate the "referent" parameter for reusing
"files_fsck_symref_target" by the following steps:
1. Use "strbuf_add_real_path" to resolve the symlink and get the
absolute path "ref_content" which the symlink ref points to.
2. Generate the absolute path "abs_gitdir" of "gitdir" and combine
"ref_content" and "abs_gitdir" to extract the relative path
"relative_referent_path".
3. If "ref_content" is outside of "gitdir", we just set "referent" with
"ref_content". Instead, we set "referent" with
"relative_referent_path".
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ideally, we want to the users use "git symbolic-ref" to create symrefs
instead of writing raw contents into the filesystem. However, "git
symbolic-ref" is strict with the refname but not strict with the
referent. For example, we can make the "referent" located at the
"$(gitdir)/logs/aaa" and manually write the content into this where we
can still successfully parse this symref by using "git rev-parse".
$ git init repo && cd repo && git commit --allow-empty -mx
$ git symbolic-ref refs/heads/test logs/aaa
$ echo $(git rev-parse HEAD) > .git/logs/aaa
$ git rev-parse test
We may need to add some restrictions for "referent" parameter when using
"git symbolic-ref" to create symrefs because ideally all the
nonpseudo-refs should be located under the "refs" directory and we may
tighten this in the future.
In order to tell the user we may tighten the above situation, create
a new fsck message "symrefTargetIsNotARef" to notify the user that this
may become an error in the future.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have code that checks regular ref contents, but we do not yet check
the contents of symbolic refs. By using "parse_loose_ref_content" for
symbolic refs, we will get the information of the "referent".
We do not need to check the "referent" by opening the file. This is
because if "referent" exists in the file system, we will eventually
check its correctness by inspecting every file in the "refs" directory.
If the "referent" does not exist in the filesystem, this is OK as it is
seen as the dangling symref.
So we just need to check the "referent" string content. A regular ref
could be accepted as a textual symref if it begins with "ref:", followed
by zero or more whitespaces, followed by the full refname, followed only
by whitespace characters. However, we always write a single SP after
"ref:" and a single LF after the refname. It may seem that we should
report a fsck error message when the "referent" does not apply above
rules and we should not be so aggressive because third-party
reimplementations of Git may have taken advantage of the looser syntax.
Put it more specific, we accept the following contents:
1. "ref: refs/heads/master "
2. "ref: refs/heads/master \n \n"
3. "ref: refs/heads/master\n\n"
When introducing the regular ref content checks, we created two fsck
infos "refMissingNewline" and "trailingRefContent" which exactly
represents above situations. So we will reuse these two fsck messages to
write checks to info the user about these situations.
But we do not allow any other trailing garbage. The followings are bad
symref contents which will be reported as fsck error by "git-fsck(1)".
1. "ref: refs/heads/master garbage\n"
2. "ref: refs/heads/master \n\n\n garbage "
And we introduce a new "badReferentName(ERROR)" fsck message to report
above errors by using "is_root_ref" and "check_refname_format" to check
the "referent". Since both "is_root_ref" and "check_refname_format"
don't work with whitespaces, we use the trimmed version of "referent"
with these functions.
In order to add checks, we will do the following things:
1. Record the untrimmed length "orig_len" and untrimmed last byte
"orig_last_byte".
2. Use "strbuf_rtrim" to trim the whitespaces or newlines to make sure
"is_root_ref" and "check_refname_format" won't be failed by them.
3. Use "orig_len" and "orig_last_byte" to check whether the "referent"
misses '\n' at the end or it has trailing whitespaces or newlines.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have already used "parse_loose_ref_contents" function to check
whether the ref content is valid in files backend. However, by
using "parse_loose_ref_contents", we allow the ref's content to end with
garbage or without a newline.
Even though we never create such loose refs ourselves, we have accepted
such loose refs. So, it is entirely possible that some third-party tools
may rely on such loose refs being valid. We should not report an error
fsck message at current. We should notify the users about such
"curiously formatted" loose refs so that adequate care is taken before
we decide to tighten the rules in the future.
And it's not suitable either to report a warn fsck message to the user.
We don't yet want the "--strict" flag that controls this bit to end up
generating errors for such weirdly-formatted reference contents, as we
first want to assess whether this retroactive tightening will cause
issues for any tools out there. It may cause compatibility issues which
may break the repository. So, we add the following two fsck infos to
represent the situation where the ref content ends without newline or
has trailing garbages:
1. refMissingNewline(INFO): A loose ref that does not end with
newline(LF).
2. trailingRefContent(INFO): A loose ref has trailing content.
It might appear that we can't provide the user with any warnings by
using FSCK_INFO. However, in "fsck.c::fsck_vreport", we will convert
FSCK_INFO to FSCK_WARN and we can still warn the user about these
situations when using "git refs verify" without introducing
compatibility issues.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git-fsck(1)" implicitly checks the ref content by passing the
callback "fsck_handle_ref" to the "refs.c::refs_for_each_rawref".
Then, it will check whether the ref content (eventually "oid")
is valid. If not, it will report the following error to the user.
error: refs/heads/main: invalid sha1 pointer 0000...
And it will also report above errors when there are dangling symrefs
in the repository wrongly. This does not align with the behavior of
the "git symbolic-ref" command which allows users to create dangling
symrefs.
As we have already introduced the "git refs verify" command, we'd better
check the ref content explicitly in the "git refs verify" command thus
later we could remove these checks in "git-fsck(1)" and launch a
subprocess to call "git refs verify" in "git-fsck(1)" to make the
"git-fsck(1)" more clean.
Following what "git-fsck(1)" does, add a similar check to "git refs
verify". Then add a new fsck error message "badRefContent(ERROR)" to
represent that a ref has an invalid content.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have already set up the infrastructure to check the consistency for
refs, but we do not support multiple worktrees. However, "git-fsck(1)"
will check the refs of worktrees. As we decide to get feature parity
with "git-fsck(1)", we need to set up support for multiple worktrees.
Because each worktree has its own specific refs, instead of just showing
the users "refs/worktree/foo", we need to display the full name such as
"worktrees/<id>/refs/worktree/foo". So we should know the id of the
worktree to get the full name. Add a new parameter "struct worktree *"
for "refs-internal.h::fsck_fn". Then change the related functions to
follow this new interface.
The "packed-refs" only exists in the main worktree, so we should only
check "packed-refs" in the main worktree. Use "is_main_worktree" method
to skip checking "packed-refs" in "packed_fsck" function.
Then, enhance the "files-backend.c::files_fsck_refs_dir" function to add
"worktree/<id>/" prefix when we are not in the main worktree.
Last, add a new test to check the refname when there are multiple
worktrees to exercise the code.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We passes "refs_check_dir" to the "files_fsck_refs_name" function which
allows it to create the checked ref name later. However, when we
introduce a new check function, we have to allocate redundant memory and
re-calculate the ref name. It's bad for us to allocate redundant memory
and duplicate logic. Instead, we should allocate and calculate it only
once and pass the ref name to the check functions.
In order not to do repeat calculation, rename "refs_check_dir" to
"refname". And in "files_fsck_refs_dir", create a new strbuf "refname",
thus whenever we handle a new ref, calculate the name and call the check
functions one by one.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In "files-backend.c::files_fsck_refs_name", we validate the refname
format by using "check_refname_format" to check the basename of the
iterator with "REFNAME_ALLOW_ONELEVEL" flag.
However, this is a bad implementation. Although we doesn't allow a
single "@" in ".git" directory, we do allow "refs/heads/@". So, we will
report an error wrongly when there is a "refs/heads/@" ref by using one
level refname "@".
Because we just check one level refname, we either cannot check the
other parts of the full refname. And we will ignore the following
errors:
"refs/heads/ new-feature/test"
"refs/heads/~new-feature/test"
In order to fix the above problem, enhance "files_fsck_refs_name" to use
the full name for "check_refname_format". Then, replace the tests which
are related to "@" and add tests to exercise the above situations using
for loop to avoid repetition.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In "fsck.c::fsck_refs_error_function", we need to tell whether "oid" and
"referent" is NULL. So, we need to always initialize these parameters to
NULL instead of letting them point to anywhere when creating a new
"fsck_ref_report" structure.
The original code explicitly initializes the "path" member in the
"struct fsck_ref_report" to NULL (which implicitly 0-initializes other
members in the struct). It is more customary to use "{ 0 }" to express
that we are 0-initializing everything. In order to align with the
codebase, initialize "fsck_ref_report" with zero.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reference transactions use `refs_verify_refname_available()` to check
for colliding references. This check consists of two parts:
- Checks for whether multiple ref updates in the same transaction
conflict with each other.
- Checks for whether existing refs conflict with any refs part of the
transaction.
While we generally cannot avoid the first check, the second check is
superfluous in cases where the transaction is an initial one in an
otherwise empty ref store. The check results in multiple ref reads as
well as the creation of a ref iterator for every ref we're checking,
which adds up quite fast when performing the check for many refs.
Introduce a new flag that allows us to skip this check and wire it up in
such that the backends pass it when running an initial transaction. This
leads to significant speedups when migrating ref storage backends. From
"files" to "reftable":
Benchmark 1: migrate files:reftable (refcount = 100000, revision = HEAD~)
Time (mean ± σ): 472.4 ms ± 6.7 ms [User: 175.9 ms, System: 285.2 ms]
Range (min … max): 463.5 ms … 483.2 ms 10 runs
Benchmark 2: migrate files:reftable (refcount = 100000, revision = HEAD)
Time (mean ± σ): 86.1 ms ± 1.9 ms [User: 67.9 ms, System: 16.0 ms]
Range (min … max): 82.9 ms … 90.9 ms 29 runs
Summary
migrate files:reftable (refcount = 100000, revision = HEAD) ran
5.48 ± 0.15 times faster than migrate files:reftable (refcount = 100000, revision = HEAD~)
And from "reftable" to "files":
Benchmark 1: migrate reftable:files (refcount = 100000, revision = HEAD~)
Time (mean ± σ): 452.7 ms ± 3.4 ms [User: 209.9 ms, System: 235.4 ms]
Range (min … max): 445.9 ms … 457.5 ms 10 runs
Benchmark 2: migrate reftable:files (refcount = 100000, revision = HEAD)
Time (mean ± σ): 95.2 ms ± 2.2 ms [User: 73.6 ms, System: 20.6 ms]
Range (min … max): 91.7 ms … 100.8 ms 28 runs
Summary
migrate reftable:files (refcount = 100000, revision = HEAD) ran
4.76 ± 0.11 times faster than migrate reftable:files (refcount = 100000, revision = HEAD~)
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "files" backend has implemented special logic when committing
the first transactions in an otherwise empty ref store: instead of
writing all refs as separate loose files, it instead knows to write them
all into a "packed-refs" file directly. This is significantly more
efficient than having to write each of the refs as separate "loose" ref.
The only user of this optimization is git-clone(1), which only uses this
mechanism to write regular refs. Consequently, the implementation does
not know how to handle both symbolic and root refs. While fine in the
context of git-clone(1), this keeps us from using the mechanism in more
cases.
Adapt the logic to also support symbolic and root refs by using a second
transaction that we use for all of the refs that need to be written as
loose refs.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are two different ways to commit a transaction:
- `ref_transaction_commit()` can be used to commit a regular
transaction and is what almost every caller wants.
- `initial_ref_transaction_commit()` can be used when it is known that
the ref store that the transaction is committed for is empty and
when there are no concurrent processes. This is used when cloning a
new repository.
Implementing this via two separate functions has a couple of downsides.
First, every reference backend needs to implement a separate callback
even in the case where they don't special-case the initial transaction.
Second, backends are basically forced to reimplement the whole logic for
how to commit the transaction like the "files" backend does, even though
backends may wish to only tweak certain behaviour of a "normal" commit.
Third, it is awkward that callers must never prepare the transaction as
this is somewhat different than how a transaction typically works.
Refactor the code such that we instead mark initial transactions via a
separate flag when starting the transaction. This addresses all of the
mentioned painpoints, where the most important part is that it will
allow backends to have way more leeway in how exactly they want to
handle the initial transaction.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the logic to commit initial transactions such that we can start to
call it in `files_transaction_finish()` in a subsequent commit without
requiring a separate function declaration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow passing flags when setting up a transaction such that the
behaviour of the transaction itself can be altered. This functionality
will be used in a subsequent patch.
Adapt callers accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* ps/environ-wo-the-repository: (21 commits)
environment: stop storing "core.notesRef" globally
environment: stop storing "core.warnAmbiguousRefs" globally
environment: stop storing "core.preferSymlinkRefs" globally
environment: stop storing "core.logAllRefUpdates" globally
refs: stop modifying global `log_all_ref_updates` variable
branch: stop modifying `log_all_ref_updates` variable
repo-settings: track defaults close to `struct repo_settings`
repo-settings: split out declarations into a standalone header
environment: guard state depending on a repository
environment: reorder header to split out `the_repository`-free section
environment: move `set_git_dir()` and related into setup layer
environment: make `get_git_namespace()` self-contained
environment: move object database functions into object layer
config: make dependency on repo in `read_early_config()` explicit
config: document `read_early_config()` and `read_very_early_config()`
environment: make `get_git_work_tree()` accept a repository
environment: make `get_graft_file()` accept a repository
environment: make `get_index_file()` accept a repository
environment: make `get_object_directory()` accept a repository
environment: make `get_git_common_dir()` accept a repository
...
|
|
"git pack-refs --auto" for the files backend was too aggressive,
which has been a bit tamed.
* ps/pack-refs-auto-heuristics:
refs/files: use heuristic to decide whether to repack with `--auto`
t0601: merge tests for auto-packing of refs
wrapper: introduce `log2u()`
|
|
Same as the preceding commit, storing the "core.preferSymlinkRefs" value
globally is misdesigned as this setting may be set per repository.
There is only a single user of this value anyway, namely the "files"
backend. So let's just remove the global variable and read the value of
this setting when initializing the backend.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The value of "core.logAllRefUpdates" is being stored in the global
variable `log_all_ref_updates`. This design is somewhat aged nowadays,
where it is entirely possible to access multiple repositories in the
same process which all have different values for this setting. So using
a single global variable to track it is plain wrong.
Remove the global variable. Instead, we now provide a new function part
of the repo-settings subsystem that parses the value for a specific
repository. While that may require us to read the value multiple times,
we work around this by reading it once when the ref backends are set up
and caching the value there.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In refs-related code we modify the global `log_all_ref_updates`
variable, which is done because `should_autocreate_reflog()` does not
accept passing an `enum log_refs_config` but instead accesses the global
variable. Adapt its interface such that the value is provided by the
caller, which allows us to compute the proper value locally without
having to modify global state.
This change requires us to move the enum to "repo-settings.h", or
otherwise we get compilation errors due to include cycles. We're about
to fully move this setting into the repo-settings subsystem anyway, so
this is fine.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In "environment.h" we have quite a lot of functions and variables that
either explicitly or implicitly depend on `the_repository`.
The implicit set of stateful declarations includes for example variables
which get populated when parsing a repository's Git configuration. This
set of variables is broken by design, as their state often depends on
the last repository config that has been parsed. So they may or may not
represent the state of `the_repository`.
Fixing that is quite a big undertaking, and later patches in this series
will demonstrate a solution for a first small set of those variables. So
for now, let's guard these with `USE_THE_REPOSITORY_VARIABLE` so that
callers are aware of the implicit dependency.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `--auto` flag for git-pack-refs(1) allows the ref backend to decide
whether or not a repack is in order. This switch has been introduced
mostly with the "reftable" backend in mind, which already knows to
auto-compact its tables during normal operations. When the flag is set,
then it will use the same auto-compaction mechanism and thus end up
doing nothing in most cases.
The "files" backend does not have any such heuristic yet and instead
packs any loose references unconditionally. So we rewrite the complete
"packed-refs" file even if there's only a single loose reference to be
packed.
Even worse, starting with 9f6714ab3e (builtin/gc: pack refs when using
`git maintenance run --auto`, 2024-03-25), `git pack-refs --auto` is
unconditionally executed via our auto maintenance, so we end up repacking
references every single time auto maintenance kicks in. And while that
commit already mentioned that the "files" backend unconditionally packs
refs now, the author obviously didn't quite think about the consequences
thereof. So while the idea was sound, we really should have added a
heuristic to the "files" backend before implementing it.
Introduce a heuristic that decides whether or not it is worth to pack
loose references. The important factors to decide here are the number of
loose references in comparison to the overall size of the "packed-refs"
file. The bigger the "packed-refs" file, the longer it takes to rewrite
it and thus we scale up the limit of allowed loose references before we
repack.
As is the nature of heuristics, this mechansim isn't obviously
"correct", but should rather be seen as a tradeoff between how much
resources we spend packing refs and how inefficient the ref store
becomes. For all I can say, we have successfully been using the exact
same heuristic in Gitaly for several years by now.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is needed to build things with -Werror=unused-parameter on a
platform without symbolic link support.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function was factored out in 57d0b1e2ea (files-backend: extract out
`create_symref_lock()`, 2024-05-07), but we never look at the ref_store
or refname parameters. We just need the path, which is already contained
in the lockfile struct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fsck" infrastructure has been taught to also check the sanity
of the ref database, in addition to the object database.
* sj/ref-fsck:
fsck: add ref name check for files backend
files-backend: add unified interface for refs scanning
builtin/refs: add verify subcommand
refs: set up ref consistency check infrastructure
fsck: add refs report function
fsck: add a unified interface for reporting fsck messages
fsck: make "fsck_error" callback generic
fsck: rename objects-related fsck error functions
fsck: rename "skiplist" to "skip_oids"
|
|
The refs API has been taught to give symref target information to
the users of ref iterators, allowing for-each-ref and friends to
avoid an extra ref_resolve_* API call per a symbolic ref.
* jc/refs-symref-referent:
ref-filter: populate symref from iterator
refs: add referent to each_ref_fn
refs: keep track of unresolved reference value in iterators
|
|
Leakfix.
* ss/packed-ref-store-leakfix:
refs/files: prevent memory leak by freeing packed_ref_store
|
|
Add a parameter to each_ref_fn so that callers to the ref APIs
that use this function as a callback can have acess to the
unresolved value of a symbolic ref.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since ref iterators do not hold onto the direct value of a reference
without resolving it, the only way to get ahold of a direct value of a
symbolic ref is to make a separate call to refs_read_symbolic_ref.
To make accessing the direct value of a symbolic ref more efficient,
let's save the direct value of the ref in the iterators for both the
files backend and the reftable backend.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git-fsck(1) only implicitly checks the reference, it does not fully
check refs with bad format name such as standalone "@".
However, a file ending with ".lock" should not be marked as having a bad
ref name. It is expected that concurrent writers may have such lock files.
We currently ignore this situation. But for bare ".lock" file, we will
report it as error.
In order to provide such checks, add a new fsck message id "badRefName"
with default ERROR type. Use existing "check_refname_format" to explicit
check the ref name. And add a new unit test to verify the functionality.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For refs and reflogs, we need to scan its corresponding directories to
check every regular file or symbolic link which shares the same pattern.
Introduce a unified interface for scanning directories for
files-backend.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "struct ref_store" is the base class which contains the "be" pointer
which provides backend-specific functions whose interfaces are defined
in the "ref_storage_be". We could reuse this polymorphism to define only
one interface. For every backend, we need to provide its own function
pointer.
The interfaces defined in the `ref_storage_be` are carefully structured
in semantic. It's organized as the five parts:
1. The name and the initialization interfaces.
2. The ref transaction interfaces.
3. The ref internal interfaces (pack, rename and copy).
4. The ref filesystem interfaces.
5. The reflog related interfaces.
To keep consistent with the git-fsck(1), add a new interface named
"fsck_refs_fn" to the end of "ref_storage_be". This semantic cannot be
grouped into any above five categories. Explicitly add blank line to
make it different from others.
Last, implement placeholder functions for each ref backends.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This complements 64a6dd8ffc (refs: implement removal of ref storages,
2024-06-06).
Signed-off-by: Sven Strickroth <email@cs-ware.de>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
