| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In the preceding commits we have renamed the structures contained in
"object-store.h" to `struct object_database` and `struct odb_backend`.
As such, the code files "object-store.{c,h}" are confusingly named now.
Rename them to "odb.{c,h}" accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `object_directory` structure is used as an access point for a single
object directory like ".git/objects". While the structure isn't yet
fully self-contained, the intent is for it to eventually contain all
information required to access objects in one specific location.
While the name "object directory" is a good fit for now, this will
change over time as we continue with the agenda to make pluggable object
databases a thing. Eventually, objects may not be accessed via any kind
of directory at all anymore, but they could instead be backed by any
kind of durable storage mechanism. While it seems quite far-fetched for
now, it is thinkable that eventually this might even be some form of a
database, for example.
As such, the current name of this structure will become worse over time
as we evolve into the direction of pluggable ODBs. Immediate next steps
will start to carve out proper self-contained object directories, which
requires us to pass in these object directories as parameters. Based on
our modern naming schema this means that those functions should then be
named after their subsystem, which means that we would start to bake the
current name into the codebase more and more.
Let's preempt this by renaming the structure. There have been a couple
alternatives that were discussed:
- `odb_backend` was discarded because it led to the association that
one object database has a single backend, but the model is that one
alternate has one backend. Furthermore, "backend" is more about the
actual backing implementation and less about the high-level concept.
- `odb_alternate` was discarded because it is a bit of a stretch to
also call the main object directory an "alternate".
Instead, pick `odb_source` as the new name. It makes it sufficiently
clear that there can be multiple sources and does not cause confusion
when mixed with the already-existing "alternate" terminology.
In the future, this change allows us to easily introduce for example a
`odb_files_source` and other format-specific implementations.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t5310 lacks a test to ensure git works correctly when commit bitmap
data is corrupted. So this patch add test helper in pack-bitmap.c to
list each commit bitmap position in bitmap file and `load corrupt bitmap`
test case in t/t5310 to corrupt a commit bitmap before loading it.
Signed-off-by: Lidong Yan <502024330056@smail.nju.edu.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git pack-objects" learns to find delta bases from blobs at the
same path, using the --path-walk API.
* ds/path-walk-2:
pack-objects: allow --shallow and --path-walk
path-walk: add new 'edge_aggressive' option
pack-objects: thread the path-based compression
pack-objects: refactor path-walk delta phase
scalar: enable path-walk during push via config
pack-objects: enable --path-walk via config
repack: add --path-walk option
t5538: add tests to confirm deltas in shallow pushes
pack-objects: introduce GIT_TEST_PACK_PATH_WALK
p5313: add performance tests for --path-walk
pack-objects: update usage to match docs
pack-objects: add --path-walk option
pack-objects: extract should_attempt_deltas()
|
|
In preparation for allowing both the --shallow and --path-walk options
in the 'git pack-objects' builtin, create a new 'edge_aggressive' option
in the path-walk API. This option will help walk the boundary more
thoroughly and help avoid sending extra objects during fetches and
pushes.
The only use of the 'edge_hint_aggressive' option in the revision API is
within mark_edges_uninteresting(), which is usually called before
between prepare_revision_walk() and before visiting commits with
get_revision(). In prepare_revision_walk(), the UNINTERESTING commits
are walked until a boundary is found.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's occasionally useful when testing or debugging to be able to do raw
zlib inflate/deflate operations (e.g., to check the bytes of a specific
loose or packed object).
Even though zlib's deflate algorithm is used by many other programs,
this is surprisingly hard to do in a portable way. E.g., gzip can do
this if you manually munge some header bytes. But the result is somewhat
arcane, and we don't assume gzip is available anyway. Likewise, pigz
will handle raw zlib, but we can't assume it is available.
So let's introduce a short test helper for just doing zlib operations.
We'll use it in subsequent patches to add some new tests, but it would
also have come in handy a few times in the past:
- The hard-coded pack data from 3b910d0c5e (add tests for indexing
packs with delta cycles, 2013-08-23) could probably be generated on
the fly.
- Likewise we could avoid the hard-coded data from 0b1493c2d4
(git_inflate(): skip zlib_post_call() sanity check on Z_NEED_DICT,
2025-02-25). Though note this would require support for more zlib
options.
- It would have helped with the debugging documented in 41dfbb2dbe
(howto: add article on recovering a corrupted object, 2013-10-25).
I'll leave refactoring existing tests for another day, but I hope the
examples above show the general utility.
I aimed for simplicity in the code. In particular, it will read all
input into a memory buffer, rather than streaming. That makes the zlib
loops harder to get wrong (which has been a source of subtle bugs in the
past).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git index-pack --fix-thin" used to abort to prevent a cycle in
delta chains from forming in a corner case even when there is no
such cycle.
* ds/fix-thin-fix:
index-pack: allow revisiting REF_DELTA chains
t5309: create failing test for 'git index-pack'
test-tool: add pack-deltas helper
|
|
Overhaul of the reftable API.
* ps/reftable-api-revamp:
reftable/table: move printing logic into test helper
reftable/constants: make block types part of the public interface
reftable/table: introduce iterator for table blocks
reftable/table: add `reftable_table` to the public interface
reftable/block: expose a generic iterator over reftable records
reftable/block: make block iterators reseekable
reftable/block: store block pointer in the block iterator
reftable/block: create public interface for reading blocks
git-zlib: use `struct z_stream_s` instead of typedef
reftable/block: rename `block_reader` to `reftable_block`
reftable/block: rename `block` to `block_data`
reftable/table: move reading block into block reader
reftable/block: simplify how we track restart points
reftable/blocksource: consolidate code into a single file
reftable/reader: rename data structure to "table"
reftable: fix formatting of the license header
|
|
Code clean-up.
* az/tighten-string-array-constness:
global: mark usage strings and string tables const
|
|
When trying to demonstrate certain behavior in tests, it can be helpful
to create packfiles that have specific delta structures. 'git
pack-objects' uses various algorithms to select deltas based on their
compression rates, but that does not always demonstrate all possible
packfile shapes. This becomes especially important when wanting to test
'git index-pack' and its ability to parse certain pack shapes.
We have prior art in t/lib-pack.sh, where certain delta structures are
produced by manually writing certain opaque pack contents. However,
producing these script updates is cumbersome and difficult to do as a
contributor.
Instead, create a new test-tool, 'test-tool pack-deltas', that reads a
list of instructions for which objects to include in a packfile and how
those objects should be written in delta form.
At the moment, this only supports REF_DELTAs as those are the kinds of
deltas needed to exercise a bug in 'git index-pack'.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update parse-options API to catch mistakes to pass address of an
integral variable of a wrong type/size.
* ps/parse-options-integers:
parse-options: detect mismatches in integer signedness
parse-options: introduce precision handling for `OPTION_UNSIGNED`
parse-options: introduce precision handling for `OPTION_INTEGER`
parse-options: rename `OPT_MAGNITUDE()` to `OPT_UNSIGNED()`
parse-options: support unit factors in `OPT_INTEGER()`
global: use designated initializers for options
parse: fix off-by-one for minimum signed values
|
|
Code clean-up.
* ps/object-file-cleanup:
object-store: merge "object-store-ll.h" and "object-store.h"
object-store: remove global array of cached objects
object: split out functions relating to object store subsystem
object-file: drop `index_blob_stream()`
object-file: split up concerns of `HASH_*` flags
object-file: split out functions relating to object store subsystem
object-file: move `xmmap()` into "wrapper.c"
object-file: move `git_open_cloexec()` to "compat/open.c"
object-file: move `safe_create_leading_directories()` into "path.c"
object-file: move `mkdir_in_gitdir()` into "path.c"
|
|
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This commit is the equivalent to the preceding commit, but instead of
introducing precision handling for `OPTION_INTEGER` we introduce it for
`OPTION_UNSIGNED`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `OPTION_INTEGER` option type accepts a signed integer. The type of
the underlying integer is a simple `int`, which restricts the range of
values accepted by such options. But there is a catch: because the
caller provides a pointer to the value via the `.value` field, which is
a simple void pointer. This has two consequences:
- There is no check whether the passed value is sufficiently long to
store the entire range of `int`. This can lead to integer wraparound
in the best case and out-of-bounds writes in the worst case.
- Even when a caller knows that they want to store a value larger than
`INT_MAX` they don't have a way to do so.
In practice this doesn't tend to be a huge issue because users typically
don't end up passing huge values to most commands. But the parsing logic
is demonstrably broken, and it is too easy to get the calling convention
wrong.
Improve the situation by introducing a new `precision` field into the
structure. This field gets assigned automatically by `OPT_INTEGER_F()`
and tracks the size of the passed value. Like this it becomes possible
for the caller to pass arbitrarily-sized integers and the underlying
logic knows to handle it correctly by doing range checks. Furthermore,
convert the code to use `strtoimax()` intstead of `strtol()` so that we
can also parse values larger than `LONG_MAX`.
Note that we do not yet assert signedness of the passed variable, which
is another source of bugs. This will be handled in a subsequent commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the preceding commit, `OPT_INTEGER()` has learned to support unit
factors. Consequently, the major differencen between `OPT_INTEGER()` and
`OPT_MAGNITUDE()` isn't the support of unit factors anymore, as both of
them do support them now. Instead, the difference is that one handles
signed and the other handles unsigned integers.
Adapt the name of `OPT_MAGNITUDE()` accordingly by renaming it to
`OPT_UNSIGNED()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While we expose macros for most of our different option types understood
by the "parse-options" subsystem, not every combination of fields that
has one as that would otherwise quickly lead to an explosion of macros.
Instead, we just initialize structures manually for those variants of
fields that don't have a macro.
Callsites that open-code these structure initialization don't use
designated initializers though and instead just provide values for each
of the fields that they want to initialize. This has three significant
downsides:
- Callsites need to specify all values up to the last field that they
care about. This often includes fields that should simply be left at
their default zero-initialized state, which adds distraction.
- Any reader not deeply familiar with the layout of the structure
has a hard time figuring out what the respective initializers mean.
- Reordering or introducing new fields in the middle of the structure
is impossible without adapting all callsites.
Convert all sites to instead use designated initializers, which we have
started using in our codebase quite a while ago. This allows us to skip
any default-initialized fields, gives the reader context by specifying
the field names and allows us to reorder or introduce new fields where
we want to.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"make test" used to have a hard dependency on (basic) Perl; tests
have been rewritten help environment with NO_PERL test the build as
much as possible.
* ps/test-wo-perl-prereq:
t5703: refactor test to not depend on Perl
t5316: refactor `max_chain()` to not depend on Perl
t0210: refactor trace2 scrubbing to not use Perl
t0021: refactor `generate_random_characters()` to not depend on Perl
t/lib-httpd: refactor "one-time-perl" CGI script to not depend on Perl
t/lib-t6000: refactor `name_from_description()` to not depend on Perl
t/lib-gpg: refactor `sanitize_pgp()` to not depend on Perl
t: refactor tests depending on Perl for textconv scripts
t: refactor tests depending on Perl to print data
t: refactor tests depending on Perl substitution operator
t: refactor tests depending on Perl transliteration operator
Makefile: stop requiring Perl when running tests
meson: stop requiring Perl when tests are enabled
t: adapt existing PERL prerequisites
t: introduce PERL_TEST_HELPERS prerequisite
t: adapt `test_readlink()` to not use Perl
t: adapt `test_copy_bytes()` to not use Perl
t: adapt character translation helpers to not use Perl
t: refactor environment sanitization to not use Perl
t: skip chain lint when PERL_PATH is unset
|
|
The object layer has been updated to take an explicit repository
instance as a parameter in more code paths.
* ps/object-wo-the-repository:
hash: stop depending on `the_repository` in `null_oid()`
hash: fix "-Wsign-compare" warnings
object-file: split out logic regarding hash algorithms
delta-islands: stop depending on `the_repository`
object-file-convert: stop depending on `the_repository`
pack-bitmap-write: stop depending on `the_repository`
pack-revindex: stop depending on `the_repository`
pack-check: stop depending on `the_repository`
environment: move access to "core.bigFileThreshold" into repo settings
pack-write: stop depending on `the_repository` and `the_hash_algo`
object: stop depending on `the_repository`
csum-file: stop depending on `the_repository`
|
|
The "object-store-ll.h" header has been introduced to keep transitive
header dependendcies and compile times at bay. Now that we have created
a new "object-store.c" file though we can easily move the last remaining
additional bit of "object-store.h", the `odb_path_map`, out of the
header.
Do so. As the "object-store.h" header is now equivalent to its low-level
alternative we drop the latter and inline it into the former.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ps/object-wo-the-repository:
hash: stop depending on `the_repository` in `null_oid()`
hash: fix "-Wsign-compare" warnings
object-file: split out logic regarding hash algorithms
delta-islands: stop depending on `the_repository`
object-file-convert: stop depending on `the_repository`
pack-bitmap-write: stop depending on `the_repository`
pack-revindex: stop depending on `the_repository`
pack-check: stop depending on `the_repository`
environment: move access to "core.bigFileThreshold" into repo settings
pack-write: stop depending on `the_repository` and `the_hash_algo`
object: stop depending on `the_repository`
csum-file: stop depending on `the_repository`
|
|
The logic to print individual blocks in a table is hosted in the
reftable library. This is only the case due to historical reasons though
because users of the library had no interfaces to read blocks one by
one. Otherwise, printing individual blocks has no place in the reftable
library given that the format will not be generic in the first place.
We have now grown a public interface to iterate through blocks contained
in a table, and thus we can finally move the logic to print them into
the test helper.
Move over the logic and refactor it accordingly. Note that the iterator
also trivially allows us to access index sections, which we previously
didn't print at all. This omission wasn't intentional though, so start
dumping those sections as well so that we can assert that indices are
written as expected.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `struct reftable_reader` subsystem encapsulates a table that has
been read from the disk. As such, the current name of that structure is
somewhat hard to understand as it only talks about the fact that we read
something from disk, without really giving an indicator _what_ that is.
Furthermore, this naming schema doesn't really fit well into how the
other structures are named: `reftable_merged_table`, `reftable_stack`,
`reftable_block` and `reftable_record` are all named after what they
encapsulate.
Rename the subsystem to `reftable_table`, which directly gives a hint
that the data structure is about handling the individual tables part of
the stack.
While this change results in a lot of churn, it prepares for us exposing
the APIs to third-party callers now that the reftable library is a
standalone library that can be linked against by other projects.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have a bunch of tests that use Perl to perform character
transliteration via the "y/" or "tr/" operator. These usecases can be
trivially replaced with tr(1).
Refactor the tests accordingly so that we can drop a couple of
PERL_TEST_HELPERS prerequisites.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `test_readlink()` helper function reads a symbolic link and returns
the path it is pointing to. It is thus equivalent to the readlink(1)
utility, which isn't available on all supported platforms. As such, it
is implemented using Perl so that we can use it even on platforms where
the shell utility isn't available.
While using readlink(1) is not an option, what we can do is to implement
the logic ourselves in our test-tool. Do so, which allows a bunch of
tests to pass when Perl is not available.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"Dubious ownership" checks on Windows has been tightened up.
* js/mingw-admins-are-special:
test-tool path-utils: support debugging "dubious ownership" issues
mingw: special-case administrators even more
|
|
The code paths to check whether a refname X is available (by seeing
if another ref X/Y exists, etc.) have been optimized.
* ps/refname-avail-check-optim:
refs: reuse iterators when determining refname availability
refs/iterator: implement seeking for files iterators
refs/iterator: implement seeking for packed-ref iterators
refs/iterator: implement seeking for ref-cache iterators
refs/iterator: implement seeking for reftable iterators
refs/iterator: implement seeking for merged iterators
refs/iterator: provide infrastructure to re-seek iterators
refs/iterator: separate lifecycle from iteration
refs: stop re-verifying common prefixes for availability
refs/files: batch refname availability checks for initial transactions
refs/files: batch refname availability checks for normal transactions
refs/reftable: batch refname availability checks
refs: introduce function to batch refname availability checks
builtin/update-ref: skip ambiguity checks when parsing object IDs
object-name: allow skipping ambiguity checks in `get_oid()` family
object-name: introduce `repo_get_oid_with_flags()`
|
|
This adds a new sub-sub-command for `test-tool`, simply passing through
the command-line arguments to the `is_path_owned_by_current_user()`
function.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The ref and reflog iterators have their lifecycle attached to iteration:
once the iterator reaches its end, it is automatically released and the
caller doesn't have to care about that anymore. When the iterator should
be released before it has been exhausted, callers must explicitly abort
the iterator via `ref_iterator_abort()`.
This lifecycle is somewhat unusual in the Git codebase and creates two
problems:
- Callsites need to be very careful about when exactly they call
`ref_iterator_abort()`, as calling the function is only valid when
the iterator itself still is. This leads to somewhat awkward calling
patterns in some situations.
- It is impossible to reuse iterators and re-seek them to a different
prefix. This feature isn't supported by any iterator implementation
except for the reftable iterators anyway, but if it was implemented
it would allow us to optimize cases where we need to search for
specific references repeatedly by reusing internal state.
Detangle the lifecycle from iteration so that we don't deallocate the
iterator anymore once it is exhausted. Instead, callers are now expected
to always call a newly introduce `ref_iterator_free()` function that
deallocates the iterator and its internal state.
Note that the `dir_iterator` is somewhat special because it does not
implement the `ref_iterator` interface, but is only used to implement
other iterators. Consequently, we have to provide `dir_iterator_free()`
instead of `dir_iterator_release()` as the allocated structure itself is
managed by the `dir_iterator` interfaces, as well, and not freed by
`ref_iterator_free()` like in all the other cases.
While at it, drop the return value of `ref_iterator_abort()`, which
wasn't really required by any of the iterator implementations anyway.
Furthermore, stop calling `base_ref_iterator_free()` in any of the
backends, but instead call it in `ref_iterator_free()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `null_oid()` function returns the object ID that only consists of
zeroes. Naturally, this ID also depends on the hash algorithm used, as
the number of zeroes is different between SHA1 and SHA256. Consequently,
the function returns the hash-algorithm-specific null object ID.
This is currently done by depending on `the_hash_algo`, which implicitly
makes us depend on `the_repository`. Refactor the function to instead
pass in the hash algorithm for which we want to retrieve the null object
ID. Adapt callsites accordingly by passing in `the_repository`, thus
bubbling up the dependency on that global variable by one layer.
There are a couple of trivial exceptions for subsystems that already got
rid of `the_repository`. These subsystems instead use the repository
that is available via the calling context:
- "builtin/grep.c"
- "grep.c"
- "refs/debug.c"
There are also two non-trivial exceptions:
- "diff-no-index.c": Here we know that we may not have a repository
initialized at all, so we cannot rely on `the_repository`. Instead,
we adapt `diff_no_index()` to get a `struct git_hash_algo` as
parameter. The only caller is located in "builtin/diff.c", where we
know to call `repo_set_hash_algo()` in case we're running outside of
a Git repository. Consequently, it is fine to continue passing
`the_repository->hash_algo` even in this case.
- "builtin/ls-files.c": There is an in-flight patch series that drops
`USE_THE_REPOSITORY_VARIABLE` in this file, which causes a semantic
conflict because we use `null_oid()` in `show_submodule()`. The
value is passed to `repo_submodule_init()`, which may use the object
ID to resolve a tree-ish in the superproject from which we want to
read the submodule config. As such, the object ID should refer to an
object in the superproject, and consequently we need to use its hash
algorithm.
This means that we could in theory just not bother about this edge
case at all and just use `the_repository` in "diff-no-index.c". But
doing so would feel misdesigned.
Remove the `USE_THE_REPOSITORY_VARIABLE` preprocessor define in
"hash.c".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fallouts from recent renaming of documentation files from .txt
suffix to the new .adoc suffix have been corrected.
* tz/doc-txt-to-adoc-fixes: (38 commits)
xdiff: *.txt -> *.adoc fixes
unpack-trees.c: *.txt -> *.adoc fixes
transport.h: *.txt -> *.adoc fixes
trace2/tr2_sysenv.c: *.txt -> *.adoc fixes
trace2.h: *.txt -> *.adoc fixes
t6434: *.txt -> *.adoc fixes
t6012: *.txt -> *.adoc fixes
t/helper/test-rot13-filter.c: *.txt -> *.adoc fixes
simple-ipc.h: *.txt -> *.adoc fixes
setup.c: *.txt -> *.adoc fixes
refs.h: *.txt -> *.adoc fixes
pseudo-merge.h: *.txt -> *.adoc fixes
parse-options.h: *.txt -> *.adoc fixes
object-name.c: *.txt -> *.adoc fixes
list-objects-filter-options.h: *.txt -> *.adoc fixes
fsck.h: *.txt -> *.adoc fixes
diffcore.h: *.txt -> *.adoc fixes
diff.h: *.txt -> *.adoc fixes
contrib/long-running-filter: *.txt -> *.adoc fixes
config.c: *.txt -> *.adoc fixes
...
|
|
The path.[ch] API takes an explicit repository parameter passed
throughout the callchain, instead of relying on the_repository
singleton instance.
* ps/path-sans-the-repository:
path: adjust last remaining users of `the_repository`
environment: move access to "core.sharedRepository" into repo settings
environment: move access to "core.hooksPath" into repo settings
repo-settings: introduce function to clear struct
path: drop `git_path()` in favor of `repo_git_path()`
rerere: let `rerere_path()` write paths into a caller-provided buffer
path: drop `git_common_path()` in favor of `repo_common_path()`
worktree: return allocated string from `get_worktree_git_dir()`
path: drop `git_path_buf()` in favor of `repo_git_path_replace()`
path: drop `git_pathdup()` in favor of `repo_git_path()`
path: drop unused `strbuf_git_path()` function
path: refactor `repo_submodule_path()` family of functions
submodule: refactor `submodule_to_gitdir()` to accept a repo
path: refactor `repo_worktree_path()` family of functions
path: refactor `repo_git_path()` family of functions
path: refactor `repo_common_path()` family of functions
|
|
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Assorted fixes and improvements to the build procedure based on
meson.
* ps/build-meson-fixes-0130:
gitlab-ci: restrict maximum number of link jobs on Windows
meson: consistently use custom program paths to resolve programs
meson: fix overwritten `git` variable
meson: prevent finding sed(1) in a loop
meson: improve handling of `sane_tool_path` option
meson: improve PATH handling
meson: drop separate version library
meson: stop linking libcurl into all executables
meson: introduce `libgit_curl` dependency
meson: simplify use of the common-main library
meson: inline the static 'git' library
meson: fix OpenSSL fallback when not explicitly required
meson: fix exec path with enabled runtime prefix
|
|
The "common-main.c" file is used by multiple executables. In order to
make it easy to set it up we have created a separate library that these
executables can link against. All of these executables also want to link
against `libgit.a` though, which makes it necessary to specify both of
these as dependencies for every executable.
Simplify this a bit by declaring the library as a source dependency:
instead of creating a static library, we now instead compile the common
set of files into each executable separately.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Lazy-loading missing files in a blobless clone on demand is costly
as it tends to be one-blob-at-a-time. "git backfill" is introduced
to help bulk-download necessary files beforehand.
* ds/backfill:
backfill: assume --sparse when sparse-checkout is enabled
backfill: add --sparse option
backfill: add --min-batch-size=<n> option
backfill: basic functionality and tests
backfill: add builtin boilerplate
|
|
"git pack-objects" and its wrapper "git repack" learned an option
to use an alternative path-hash function to improve delta-base
selection to produce a packfile with deeper history than window
size.
* ds/name-hash-tweaks:
pack-objects: prevent name hash version change
test-tool: add helper for name-hash values
p5313: add size comparison test
pack-objects: add GIT_TEST_NAME_HASH_VERSION
repack: add --name-hash-version option
pack-objects: add --name-hash-version option
pack-objects: create new name-hash function version
|
|
As explained in an earlier commit, we're refactoring path-related
functions to provide a consistent interface for computing paths into the
commondir, gitdir and worktree. Refactor the "submodule" family of
functions accordingly.
Note that in contrast to the other `repo_*_path()` families, we have to
pass in the repository as a non-constant pointer. This is because we end
up calling `repo_read_gitmodules()` deep down in the callstack, which
may end up modifying the repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One way to significantly reduce the cost of a Git clone and later fetches is
to use a blobless partial clone and combine that with a sparse-checkout that
reduces the paths that need to be populated in the working directory. Not
only does this reduce the cost of clones and fetches, the sparse-checkout
reduces the number of objects needed to download from a promisor remote.
However, history investigations can be expensive as computing blob diffs
will trigger promisor remote requests for one object at a time. This can be
avoided by downloading the blobs needed for the given sparse-checkout using
'git backfill' and its new '--sparse' mode, at a time that the user is
willing to pay that extra cost.
Note that this is distinctly different from the '--filter=sparse:<oid>'
option, as this assumes that the partial clone has all reachable trees and
we are using client-side logic to avoid downloading blobs outside of the
sparse-checkout cone. This avoids the server-side cost of walking trees
while also achieving a similar goal. It also downloads in batches based on
similar path names, presenting a resumable download if things are
interrupted.
This augments the path-walk API to have a possibly-NULL 'pl' member that may
point to a 'struct pattern_list'. This could be more general than the
sparse-checkout definition at HEAD, but 'git backfill --sparse' is currently
the only consumer.
Be sure to test this in both cone mode and not cone mode. Cone mode has the
benefit that the path-walk can skip certain paths once they would expand
beyond the sparse-checkout. Non-cone mode can describe the included files
using both positive and negative patterns, which changes the possible return
values of path_matches_pattern_list(). Test both kinds of matches for
increased coverage.
To test this, we can create a blobless sparse clone, expand the
sparse-checkout slightly, and then run 'git backfill --sparse' to see
how much data is downloaded. The general steps are
1. git clone --filter=blob:none --sparse <url>
2. git sparse-checkout set <dir1> ... <dirN>
3. git backfill --sparse
For the Git repository with the 'builtin' directory in the
sparse-checkout, we get these results for various batch sizes:
| Batch Size | Pack Count | Pack Size | Time |
|-----------------|------------|-----------|-------|
| (Initial clone) | 3 | 110 MB | |
| 10K | 12 | 192 MB | 17.2s |
| 15K | 9 | 192 MB | 15.5s |
| 20K | 8 | 192 MB | 15.5s |
| 25K | 7 | 192 MB | 14.7s |
This case matters less because a full clone of the Git repository from
GitHub is currently at 277 MB.
Using a copy of the Linux repository with the 'kernel/' directory in the
sparse-checkout, we get these results:
| Batch Size | Pack Count | Pack Size | Time |
|-----------------|------------|-----------|------|
| (Initial clone) | 2 | 1,876 MB | |
| 10K | 11 | 2,187 MB | 46s |
| 25K | 7 | 2,188 MB | 43s |
| 50K | 5 | 2,194 MB | 44s |
| 100K | 4 | 2,194 MB | 48s |
This case is more meaningful because a full clone of the Linux
repository is currently over 6 GB, so this is a valuable way to download
a fraction of the repository and no longer need network access for all
reachable objects within the sparse-checkout.
Choosing a batch size will depend on a lot of factors, including the
user's network speed or reliability, the repository's file structure,
and how many versions there are of the file within the sparse-checkout
scope. There will not be a one-size-fits-all solution.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The API around choosing to use unsafe variant of SHA-1
implementation has been updated in an attempt to make it harder to
abuse.
* tb/unsafe-hash-cleanup:
hash.h: drop unsafe_ function variants
csum-file: introduce hashfile_checkpoint_init()
t/helper/test-hash.c: use unsafe_hash_algo()
csum-file.c: use unsafe_hash_algo()
hash.h: introduce `unsafe_hash_algo()`
csum-file.c: extract algop from hashfile_checksum_valid()
csum-file: store the hash algorithm as a struct field
t/helper/test-tool: implement sha1-unsafe helper
|
|
Adapt callers to use generic hash context helpers instead of using the
hash algorithm to update them. This makes the callsites easier to reason
about and removes the possibility that the wrong hash algorithm is used
to update the hash context's state. And as a nice side effect this also
gets rid of a bunch of users of `the_hash_algo`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We generally avoid using `typedef` in the Git codebase. One exception
though is the `git_hash_ctx`, likely because it used to be a union
rather than a struct until the preceding commit refactored it. But now
that it is a normal `struct` there isn't really a need for a typedef
anymore.
Drop the typedef and adapt all callers accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tb/unsafe-hash-cleanup:
hash.h: drop unsafe_ function variants
csum-file: introduce hashfile_checkpoint_init()
t/helper/test-hash.c: use unsafe_hash_algo()
csum-file.c: use unsafe_hash_algo()
hash.h: introduce `unsafe_hash_algo()`
csum-file.c: extract algop from hashfile_checksum_valid()
csum-file: store the hash algorithm as a struct field
t/helper/test-tool: implement sha1-unsafe helper
|
|
Introduce a new API to visit objects in batches based on a common
path, or by type.
* ds/path-walk-1:
path-walk: drop redundant parse_tree() call
path-walk: reorder object visits
path-walk: mark trees and blobs as UNINTERESTING
path-walk: visit tags and cached objects
path-walk: allow consumer to specify object types
t6601: add helper for testing path-walk API
test-lib-functions: add test_cmp_sorted
path-walk: introduce an object walk by path
|
|
The help text from "git $cmd -h" appear on the standard output for
some $cmd and the standard error for others. The built-in commands
have been fixed to show them on the standard output consistently.
* jc/show-usage-help:
builtin: send usage() help text to standard output
oddballs: send usage() help text to standard output
builtins: send usage_with_options() help text to standard output
usage: add show_usage_if_asked()
parse-options: add show_usage_with_options_if_asked()
t0012: optionally check that "-h" output goes to stdout
|
|
Add a new test-tool helper, name-hash, to output the value of the
name-hash algorithms for the input list of strings, one per line.
Since the name-hash values can be stored in the .bitmap files, it is
important that these hash functions do not change across Git versions.
Add a simple test to t5310-pack-bitmaps.sh to provide some testing of
the current values. Due to how these functions are implemented, it would
be difficult to change them without disturbing these values. The paths
used for this test are carefully selected to demonstrate some of the
behavior differences of the two current name hash versions, including
which conditions will cause them to collide.
Create a performance test that uses test_size to demonstrate how
collisions occur for these hash algorithms. This test helps inform
someone as to the behavior of the name-hash algorithms for their repo
based on the paths at HEAD.
My copy of the Git repository shows modest statistics around the
collisions of the default name-hash algorithm:
Test this tree
--------------------------------------------------
5314.1: paths at head 4.5K
5314.2: distinct hash value: v1 4.1K
5314.3: maximum multiplicity: v1 13
5314.4: distinct hash value: v2 4.2K
5314.5: maximum multiplicity: v2 9
Here, the maximum collision multiplicity is 13, but around 10% of paths
have a collision with another path.
In a more interesting example, the microsoft/fluentui [1] repo had these
statistics at time of committing:
Test this tree
--------------------------------------------------
5314.1: paths at head 19.5K
5314.2: distinct hash value: v1 8.2K
5314.3: maximum multiplicity: v1 279
5314.4: distinct hash value: v2 17.8K
5314.5: maximum multiplicity: v2 44
[1] https://github.com/microsoft/fluentui
That demonstrates that of the nearly twenty thousand path names, they
are assigned around eight thousand distinct values. 279 paths are
assigned to a single value, leading the packing algorithm to sort
objects from those paths together, by size.
With the v2 name hash function, the maximum multiplicity lowers to 44,
leaving some room for further improvement.
In a more extreme example, an internal monorepo had a much worse
collision rate:
Test this tree
--------------------------------------------------
5314.1: paths at head 227.3K
5314.2: distinct hash value: v1 72.3K
5314.3: maximum multiplicity: v1 14.4K
5314.4: distinct hash value: v2 166.5K
5314.5: maximum multiplicity: v2 138
Here, we can see that the v2 name hash function provides somem
improvements, but there are still a number of collisions that could lead
to repacking problems at this scale.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove a series of conditionals within the shared cmd_hash_impl() helper
that powers the 'sha1' and 'sha1-unsafe' helpers.
Instead, replace them with a single conditional that transforms the
specified hash algorithm into its unsafe variant. Then all subsequent
calls can directly use whatever function it wants to call without having
to decide between the safe and unsafe variants.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the new "unsafe" SHA-1 build knob, it is convenient to have a
test-tool that can exercise Git's unsafe SHA-1 wrappers for testing,
similar to 't/helper/test-tool sha1'.
Implement that helper by altering the implementation of that test-tool
(in cmd_hash_impl(), which is generic and parameterized over different
hash functions) to conditionally run the unsafe variants of the chosen
hash function, and expose the new behavior via a new 'sha1-unsafe' test
helper.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More code paths have a repository passed through the callchain,
instead of assuming the primary the_repository object.
* ps/the-repository:
match-trees: stop using `the_repository`
graph: stop using `the_repository`
add-interactive: stop using `the_repository`
tmp-objdir: stop using `the_repository`
resolve-undo: stop using `the_repository`
credential: stop using `the_repository`
mailinfo: stop using `the_repository`
diagnose: stop using `the_repository`
server-info: stop using `the_repository`
send-pack: stop using `the_repository`
serve: stop using `the_repository`
trace: stop using `the_repository`
pager: stop using `the_repository`
progress: stop using `the_repository`
|
|
The code to compute "unique" name used git_rand() which can fail or
get stuck; the callsite does not require cryptographic security.
Introduce the "insecure" mode and use it appropriately.
* ps/reftable-get-random-fix:
reftable/stack: accept insecure random bytes
wrapper: allow generating insecure random bytes
|
