From c573572c52758c4368ebc410d6b801fefa6bcbdd Mon Sep 17 00:00:00 2001
From: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Date: Thu, 9 May 2019 13:48:28 +0200
Subject: send-email: move the read_config() function above getopts
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This is in preparation for a later change where we'll read the config
first before parsing command-line options. As the move detection will
show no lines (except one line of comment) is changed here, just moved
around.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
 git-send-email.perl | 97 ++++++++++++++++++++++++++---------------------------
 1 file changed, 48 insertions(+), 49 deletions(-)

(limited to 'git-send-email.perl')

diff --git a/git-send-email.perl b/git-send-email.perl
index f4c07908d2..6d6dee6bcf 100755
--- a/git-send-email.perl
+++ b/git-send-email.perl
@@ -307,6 +307,54 @@ sub signal_handler {
 $SIG{TERM} = \&signal_handler;
 $SIG{INT}  = \&signal_handler;
 
+# Read our sendemail.* config
+sub read_config {
+	my ($prefix) = @_;
+
+	foreach my $setting (keys %config_bool_settings) {
+		my $target = $config_bool_settings{$setting}->[0];
+		$$target = Git::config_bool(@repo, "$prefix.$setting") unless (defined $$target);
+	}
+
+	foreach my $setting (keys %config_path_settings) {
+		my $target = $config_path_settings{$setting};
+		if (ref($target) eq "ARRAY") {
+			unless (@$target) {
+				my @values = Git::config_path(@repo, "$prefix.$setting");
+				@$target = @values if (@values && defined $values[0]);
+			}
+		}
+		else {
+			$$target = Git::config_path(@repo, "$prefix.$setting") unless (defined $$target);
+		}
+	}
+
+	foreach my $setting (keys %config_settings) {
+		my $target = $config_settings{$setting};
+		next if $setting eq "to" and defined $no_to;
+		next if $setting eq "cc" and defined $no_cc;
+		next if $setting eq "bcc" and defined $no_bcc;
+		if (ref($target) eq "ARRAY") {
+			unless (@$target) {
+				my @values = Git::config(@repo, "$prefix.$setting");
+				@$target = @values if (@values && defined $values[0]);
+			}
+		}
+		else {
+			$$target = Git::config(@repo, "$prefix.$setting") unless (defined $$target);
+		}
+	}
+
+	if (!defined $smtp_encryption) {
+		my $enc = Git::config(@repo, "$prefix.smtpencryption");
+		if (defined $enc) {
+			$smtp_encryption = $enc;
+		} elsif (Git::config_bool(@repo, "$prefix.smtpssl")) {
+			$smtp_encryption = 'ssl';
+		}
+	}
+}
+
 # Begin by accumulating all the variables (defined above), that we will end up
 # needing, first, from the command line:
 
@@ -387,55 +435,6 @@ die __("`batch-size` and `relogin` must be specified together " .
 	"(via command-line or configuration option)\n")
 	if defined $relogin_delay and not defined $batch_size;
 
-# Now, let's fill any that aren't set in with defaults:
-
-sub read_config {
-	my ($prefix) = @_;
-
-	foreach my $setting (keys %config_bool_settings) {
-		my $target = $config_bool_settings{$setting}->[0];
-		$$target = Git::config_bool(@repo, "$prefix.$setting") unless (defined $$target);
-	}
-
-	foreach my $setting (keys %config_path_settings) {
-		my $target = $config_path_settings{$setting};
-		if (ref($target) eq "ARRAY") {
-			unless (@$target) {
-				my @values = Git::config_path(@repo, "$prefix.$setting");
-				@$target = @values if (@values && defined $values[0]);
-			}
-		}
-		else {
-			$$target = Git::config_path(@repo, "$prefix.$setting") unless (defined $$target);
-		}
-	}
-
-	foreach my $setting (keys %config_settings) {
-		my $target = $config_settings{$setting};
-		next if $setting eq "to" and defined $no_to;
-		next if $setting eq "cc" and defined $no_cc;
-		next if $setting eq "bcc" and defined $no_bcc;
-		if (ref($target) eq "ARRAY") {
-			unless (@$target) {
-				my @values = Git::config(@repo, "$prefix.$setting");
-				@$target = @values if (@values && defined $values[0]);
-			}
-		}
-		else {
-			$$target = Git::config(@repo, "$prefix.$setting") unless (defined $$target);
-		}
-	}
-
-	if (!defined $smtp_encryption) {
-		my $enc = Git::config(@repo, "$prefix.smtpencryption");
-		if (defined $enc) {
-			$smtp_encryption = $enc;
-		} elsif (Git::config_bool(@repo, "$prefix.smtpssl")) {
-			$smtp_encryption = 'ssl';
-		}
-	}
-}
-
 # read configuration from [sendemail "$identity"], fall back on [sendemail]
 $identity = Git::config(@repo, "sendemail.identity") unless (defined $identity);
 read_config("sendemail.$identity") if (defined $identity);
-- 
cgit v1.2.3


From e60f6d13f3b04ee3a8aa50ed5a0b97d2fb58bad8 Mon Sep 17 00:00:00 2001
From: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Date: Thu, 9 May 2019 13:48:29 +0200
Subject: send-email: rename the @bcclist variable for consistency
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The "to" and "cc" variables are named @initial_{to,cc}, let's rename
this one to match them.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
 git-send-email.perl | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'git-send-email.perl')

diff --git a/git-send-email.perl b/git-send-email.perl
index 6d6dee6bcf..b6af001419 100755
--- a/git-send-email.perl
+++ b/git-send-email.perl
@@ -169,7 +169,7 @@ my $re_encoded_text = qr/[^? \000-\037\177-\377]+/;
 my $re_encoded_word = qr/=\?($re_token)\?($re_token)\?($re_encoded_text)\?=/;
 
 # Variables we fill in automatically, or via prompting:
-my (@to,$no_to,@initial_to,@cc,$no_cc,@initial_cc,@bcclist,$no_bcc,@xh,
+my (@to,$no_to,@initial_to,@cc,$no_cc,@initial_cc,@initial_bcc,$no_bcc,@xh,
 	$initial_in_reply_to,$reply_to,$initial_subject,@files,
 	$author,$sender,$smtp_authpass,$annotate,$use_xmailer,$compose,$time);
 
@@ -264,7 +264,7 @@ my %config_settings = (
     "cc" => \@initial_cc,
     "cccmd" => \$cc_cmd,
     "aliasfiletype" => \$aliasfiletype,
-    "bcc" => \@bcclist,
+    "bcc" => \@initial_bcc,
     "suppresscc" => \@suppress_cc,
     "envelopesender" => \$envelope_sender,
     "confirm"   => \$confirm,
@@ -374,7 +374,7 @@ $rc = GetOptions(
 		    "no-to" => \$no_to,
 		    "cc=s" => \@initial_cc,
 		    "no-cc" => \$no_cc,
-		    "bcc=s" => \@bcclist,
+		    "bcc=s" => \@initial_bcc,
 		    "no-bcc" => \$no_bcc,
 		    "chain-reply-to!" => \$chain_reply_to,
 		    "no-chain-reply-to" => sub {$chain_reply_to = 0},
@@ -922,7 +922,7 @@ sub expand_one_alias {
 
 @initial_to = process_address_list(@initial_to);
 @initial_cc = process_address_list(@initial_cc);
-@bcclist = process_address_list(@bcclist);
+@initial_bcc = process_address_list(@initial_bcc);
 
 if ($thread && !defined $initial_in_reply_to && $prompting) {
 	$initial_in_reply_to = ask(
@@ -1345,7 +1345,7 @@ sub send_message {
 		    }
 	       @cc);
 	my $to = join (",\n\t", @recipients);
-	@recipients = unique_email_list(@recipients,@cc,@bcclist);
+	@recipients = unique_email_list(@recipients,@cc,@initial_bcc);
 	@recipients = (map { extract_valid_address_or_die($_) } @recipients);
 	my $date = format_2822_time($time++);
 	my $gitversion = '@@GIT_VERSION@@';
-- 
cgit v1.2.3


From 3494dfd3ee058bbeab6a462673d9184dcd694a8b Mon Sep 17 00:00:00 2001
From: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Date: Thu, 9 May 2019 13:48:30 +0200
Subject: send-email: do defaults -> config -> getopt in that order
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Change the git-send-email command-line argument parsing and config
reading code to parse those two in the right order. I.e. first we set
our hardcoded defaults, then we read our config, and finally we read
the command-line, with later sets overriding earlier sets.

This fixes a bug introduced in e67a228cd8 ("send-email:
automatically determine transfer-encoding", 2018-07-08). That change
broke the reading of sendmail.transferencoding because it wasn't
careful to update the code to parse them in the previous "defaults
-> getopt -> config" order.

But as we can see from the history for this file doing it this way was
never what we actually wanted, it's just something we grew organically
as of 5483c71d7a ("git-send-email: make options easier to configure.",
2007-06-27) and have been dealing with the fallout since, e.g. in
463b0ea22b ("send-email: Fix %config_path_settings handling",
2011-10-14).

As can be seen in this change the only place where we actually want to
do something clever is with the to/cc/bcc variables, where setting
them on the command-line (or using --no-{to,cc,bcc}) should clear out
values we grab from the config.

All the rest are things where the command-line should simply override
the config values, and by reading the config first the config code
doesn't need all this "let's not set it, if it was on the command-line"
special-casing, as [1] shows we'd otherwise need to care about the
difference between whether something was a default or present in
config to fix the bug in e67a228cd8.

1. https://public-inbox.org/git/20190508105607.178244-2-gitster@pobox.com/

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
 git-send-email.perl   | 91 +++++++++++++++++++++++++++------------------------
 t/t9001-send-email.sh | 13 +++++++-
 2 files changed, 61 insertions(+), 43 deletions(-)

(limited to 'git-send-email.perl')

diff --git a/git-send-email.perl b/git-send-email.perl
index b6af001419..46a5242d25 100755
--- a/git-send-email.perl
+++ b/git-send-email.perl
@@ -169,11 +169,15 @@ my $re_encoded_text = qr/[^? \000-\037\177-\377]+/;
 my $re_encoded_word = qr/=\?($re_token)\?($re_token)\?($re_encoded_text)\?=/;
 
 # Variables we fill in automatically, or via prompting:
-my (@to,$no_to,@initial_to,@cc,$no_cc,@initial_cc,@initial_bcc,$no_bcc,@xh,
+my (@to,@cc,@xh,$envelope_sender,
 	$initial_in_reply_to,$reply_to,$initial_subject,@files,
-	$author,$sender,$smtp_authpass,$annotate,$use_xmailer,$compose,$time);
-
-my $envelope_sender;
+	$author,$sender,$smtp_authpass,$annotate,$compose,$time);
+# Things we either get from config, *or* are overridden on the
+# command-line.
+my ($no_cc, $no_to, $no_bcc);
+my (@config_to, @getopt_to);
+my (@config_cc, @getopt_cc);
+my (@config_bcc, @getopt_bcc);
 
 # Example reply to:
 #$initial_in_reply_to = ''; #<20050203173208.GA23964@foobar.com>';
@@ -220,33 +224,37 @@ sub do_edit {
 }
 
 # Variables with corresponding config settings
-my ($thread, $chain_reply_to, $suppress_from, $signed_off_by_cc);
+my ($suppress_from, $signed_off_by_cc);
 my ($cover_cc, $cover_to);
 my ($to_cmd, $cc_cmd);
 my ($smtp_server, $smtp_server_port, @smtp_server_options);
 my ($smtp_authuser, $smtp_encryption, $smtp_ssl_cert_path);
 my ($batch_size, $relogin_delay);
 my ($identity, $aliasfiletype, @alias_files, $smtp_domain, $smtp_auth);
-my ($validate, $confirm);
+my ($confirm);
 my (@suppress_cc);
 my ($auto_8bit_encoding);
 my ($compose_encoding);
-my $target_xfer_encoding = 'auto';
-
+# Variables with corresponding config settings & hardcoded defaults
 my ($debug_net_smtp) = 0;		# Net::SMTP, see send_message()
+my $thread = 1;
+my $chain_reply_to = 0;
+my $use_xmailer = 1;
+my $validate = 1;
+my $target_xfer_encoding = 'auto';
 
 my %config_bool_settings = (
-    "thread" => [\$thread, 1],
-    "chainreplyto" => [\$chain_reply_to, 0],
-    "suppressfrom" => [\$suppress_from, undef],
-    "signedoffbycc" => [\$signed_off_by_cc, undef],
-    "cccover" => [\$cover_cc, undef],
-    "tocover" => [\$cover_to, undef],
-    "signedoffcc" => [\$signed_off_by_cc, undef],      # Deprecated
-    "validate" => [\$validate, 1],
-    "multiedit" => [\$multiedit, undef],
-    "annotate" => [\$annotate, undef],
-    "xmailer" => [\$use_xmailer, 1]
+    "thread" => \$thread,
+    "chainreplyto" => \$chain_reply_to,
+    "suppressfrom" => \$suppress_from,
+    "signedoffbycc" => \$signed_off_by_cc,
+    "cccover" => \$cover_cc,
+    "tocover" => \$cover_to,
+    "signedoffcc" => \$signed_off_by_cc,
+    "validate" => \$validate,
+    "multiedit" => \$multiedit,
+    "annotate" => \$annotate,
+    "xmailer" => \$use_xmailer,
 );
 
 my %config_settings = (
@@ -259,12 +267,12 @@ my %config_settings = (
     "smtpauth" => \$smtp_auth,
     "smtpbatchsize" => \$batch_size,
     "smtprelogindelay" => \$relogin_delay,
-    "to" => \@initial_to,
+    "to" => \@config_to,
     "tocmd" => \$to_cmd,
-    "cc" => \@initial_cc,
+    "cc" => \@config_cc,
     "cccmd" => \$cc_cmd,
     "aliasfiletype" => \$aliasfiletype,
-    "bcc" => \@initial_bcc,
+    "bcc" => \@config_bcc,
     "suppresscc" => \@suppress_cc,
     "envelopesender" => \$envelope_sender,
     "confirm"   => \$confirm,
@@ -312,8 +320,9 @@ sub read_config {
 	my ($prefix) = @_;
 
 	foreach my $setting (keys %config_bool_settings) {
-		my $target = $config_bool_settings{$setting}->[0];
-		$$target = Git::config_bool(@repo, "$prefix.$setting") unless (defined $$target);
+		my $target = $config_bool_settings{$setting};
+		my $v = Git::config_bool(@repo, "$prefix.$setting");
+		$$target = $v if defined $v;
 	}
 
 	foreach my $setting (keys %config_path_settings) {
@@ -325,15 +334,13 @@ sub read_config {
 			}
 		}
 		else {
-			$$target = Git::config_path(@repo, "$prefix.$setting") unless (defined $$target);
+			my $v = Git::config_path(@repo, "$prefix.$setting");
+			$$target = $v if defined $v;
 		}
 	}
 
 	foreach my $setting (keys %config_settings) {
 		my $target = $config_settings{$setting};
-		next if $setting eq "to" and defined $no_to;
-		next if $setting eq "cc" and defined $no_cc;
-		next if $setting eq "bcc" and defined $no_bcc;
 		if (ref($target) eq "ARRAY") {
 			unless (@$target) {
 				my @values = Git::config(@repo, "$prefix.$setting");
@@ -341,7 +348,8 @@ sub read_config {
 			}
 		}
 		else {
-			$$target = Git::config(@repo, "$prefix.$setting") unless (defined $$target);
+			my $v = Git::config(@repo, "$prefix.$setting");
+			$$target = $v if defined $v;
 		}
 	}
 
@@ -355,6 +363,10 @@ sub read_config {
 	}
 }
 
+$identity = Git::config(@repo, "sendemail.identity");
+read_config("sendemail.$identity") if defined $identity;
+read_config("sendemail");
+
 # Begin by accumulating all the variables (defined above), that we will end up
 # needing, first, from the command line:
 
@@ -369,12 +381,12 @@ $rc = GetOptions(
                     "in-reply-to=s" => \$initial_in_reply_to,
 		    "reply-to=s" => \$reply_to,
 		    "subject=s" => \$initial_subject,
-		    "to=s" => \@initial_to,
+		    "to=s" => \@getopt_to,
 		    "to-cmd=s" => \$to_cmd,
 		    "no-to" => \$no_to,
-		    "cc=s" => \@initial_cc,
+		    "cc=s" => \@getopt_cc,
 		    "no-cc" => \$no_cc,
-		    "bcc=s" => \@initial_bcc,
+		    "bcc=s" => \@getopt_bcc,
 		    "no-bcc" => \$no_bcc,
 		    "chain-reply-to!" => \$chain_reply_to,
 		    "no-chain-reply-to" => sub {$chain_reply_to = 0},
@@ -423,6 +435,11 @@ $rc = GetOptions(
 		    "relogin-delay=i" => \$relogin_delay,
 	 );
 
+# Munge any "either config or getopt, not both" variables
+my @initial_to = @getopt_to ? @getopt_to : ($no_to ? () : @config_to);
+my @initial_cc = @getopt_cc ? @getopt_cc : ($no_cc ? () : @config_cc);
+my @initial_bcc = @getopt_bcc ? @getopt_bcc : ($no_bcc ? () : @config_bcc);
+
 usage() if $help;
 unless ($rc) {
     usage();
@@ -435,16 +452,6 @@ die __("`batch-size` and `relogin` must be specified together " .
 	"(via command-line or configuration option)\n")
 	if defined $relogin_delay and not defined $batch_size;
 
-# read configuration from [sendemail "$identity"], fall back on [sendemail]
-$identity = Git::config(@repo, "sendemail.identity") unless (defined $identity);
-read_config("sendemail.$identity") if (defined $identity);
-read_config("sendemail");
-
-# fall back on builtin bool defaults
-foreach my $setting (values %config_bool_settings) {
-	${$setting->[0]} = $setting->[1] unless (defined (${$setting->[0]}));
-}
-
 # 'default' encryption is none -- this only prevents a warning
 $smtp_encryption = '' unless (defined $smtp_encryption);
 
diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh
index 1da282c415..c67be97e30 100755
--- a/t/t9001-send-email.sh
+++ b/t/t9001-send-email.sh
@@ -1433,7 +1433,18 @@ test_expect_success $PREREQ '--transfer-encoding overrides sendemail.transferEnc
 	test -z "$(ls msgtxt*)"
 '
 
-test_expect_success $PREREQ 'sendemail.transferencoding=8bit' '
+test_expect_success $PREREQ 'sendemail.transferencoding=8bit via config' '
+	clean_fake_sendmail &&
+	git -c sendemail.transferencoding=8bit send-email \
+		--smtp-server="$(pwd)/fake.sendmail" \
+		email-using-8bit \
+		2>errors >out &&
+	sed '1,/^$/d' msgtxt1 >actual &&
+	sed '1,/^$/d' email-using-8bit >expected &&
+	test_cmp expected actual
+'
+
+test_expect_success $PREREQ 'sendemail.transferencoding=8bit via cli' '
 	clean_fake_sendmail &&
 	git send-email \
 		--transfer-encoding=8bit \
-- 
cgit v1.2.3


From 3ff15040e22676db0b369efbd8b908b8fcc9b38d Mon Sep 17 00:00:00 2001
From: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Date: Fri, 17 May 2019 21:55:44 +0200
Subject: send-email: fix regression in sendemail.identity parsing
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Fix a regression in my recent 3494dfd3ee ("send-email: do defaults ->
config -> getopt in that order", 2019-05-09). I missed that the
$identity variable needs to be extracted from the command-line before
we do the config reading, as it determines which config variable we
should read first. See [1] for the report.

The sendemail.identity feature was added back in
34cc60ce2b ("send-email: Add support for SSL and SMTP-AUTH",
2007-09-03), there were no tests to assert that it worked properly.

So let's fix both the regression, and add some tests to assert that
this is being parsed properly. While I'm at it I'm adding a
--no-identity option to go with --[to|cc|bcc] variable, since the
semantics are similar. It's like to/cc/bcc except that unlike those we
don't support multiple identities, but we could now easily add it
support for it if anyone cares.

In just fixing the --identity command-line parsing bug I discovered
that a narrow fix to that wouldn't do. In read_config() we had a state
machine that would only set config values if they weren't set already,
and thus by proxy we wouldn't e.g. set "to" based on sendemail.to if
we'd seen sendemail.gmail.to before, with --identity=gmail.

I'd modified some of the relevant code in 3494dfd3ee, but just
reverting to that wouldn't do, since it would bring back the
regression fixed in that commit.

Refactor read_config() do what we actually mean here. We don't want to
set a given sendemail.VAR if a sendemail.$identity.VAR previously set
it. The old code was conflating this desire with the hardcoded
defaults for these variables, and as discussed in 3494dfd3ee that was
never going to work. Instead pass along the state of whether an
identity config set something before, as distinguished from the state
of the default just being false, or the default being a non-bool or
true (e.g. --transferencoding).

I'm still not happy with the test coverage here, e.g. there's nothing
testing sendemail.smtpEncryption, but I only have so much time to fix
this code.

1. https://public-inbox.org/git/5cddeb61.1c69fb81.47ed4.e648@mx.google.com/

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
 Documentation/git-send-email.txt |  4 +++
 git-send-email.perl              | 59 ++++++++++++++++++++++++------------
 t/t9001-send-email.sh            | 64 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 108 insertions(+), 19 deletions(-)

(limited to 'git-send-email.perl')

diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt
index 01fd9d4b59..cf4e3d99bc 100644
--- a/Documentation/git-send-email.txt
+++ b/Documentation/git-send-email.txt
@@ -277,6 +277,10 @@ Automating
 	Clears any list of "To:", "Cc:", "Bcc:" addresses previously
 	set via config.
 
+--no-identity::
+	Clears the previously read value of `sendemail.identity` set
+	via config, if any.
+
 --to-cmd=<command>::
 	Specify a command to execute once per patch file which
 	should generate patch file specific "To:" entries.
diff --git a/git-send-email.perl b/git-send-email.perl
index 46a5242d25..474598339e 100755
--- a/git-send-email.perl
+++ b/git-send-email.perl
@@ -174,7 +174,7 @@ my (@to,@cc,@xh,$envelope_sender,
 	$author,$sender,$smtp_authpass,$annotate,$compose,$time);
 # Things we either get from config, *or* are overridden on the
 # command-line.
-my ($no_cc, $no_to, $no_bcc);
+my ($no_cc, $no_to, $no_bcc, $no_identity);
 my (@config_to, @getopt_to);
 my (@config_cc, @getopt_cc);
 my (@config_bcc, @getopt_bcc);
@@ -317,44 +317,53 @@ $SIG{INT}  = \&signal_handler;
 
 # Read our sendemail.* config
 sub read_config {
-	my ($prefix) = @_;
+	my ($configured, $prefix) = @_;
 
 	foreach my $setting (keys %config_bool_settings) {
 		my $target = $config_bool_settings{$setting};
 		my $v = Git::config_bool(@repo, "$prefix.$setting");
-		$$target = $v if defined $v;
+		next unless defined $v;
+		next if $configured->{$setting}++;
+		$$target = $v;
 	}
 
 	foreach my $setting (keys %config_path_settings) {
 		my $target = $config_path_settings{$setting};
 		if (ref($target) eq "ARRAY") {
-			unless (@$target) {
-				my @values = Git::config_path(@repo, "$prefix.$setting");
-				@$target = @values if (@values && defined $values[0]);
-			}
+			my @values = Git::config_path(@repo, "$prefix.$setting");
+			next unless @values;
+			next if $configured->{$setting}++;
+			@$target = @values;
 		}
 		else {
 			my $v = Git::config_path(@repo, "$prefix.$setting");
-			$$target = $v if defined $v;
+			next unless defined $v;
+			next if $configured->{$setting}++;
+			$$target = $v;
 		}
 	}
 
 	foreach my $setting (keys %config_settings) {
 		my $target = $config_settings{$setting};
 		if (ref($target) eq "ARRAY") {
-			unless (@$target) {
-				my @values = Git::config(@repo, "$prefix.$setting");
-				@$target = @values if (@values && defined $values[0]);
-			}
+			my @values = Git::config(@repo, "$prefix.$setting");
+			next unless @values;
+			next if $configured->{$setting}++;
+			@$target = @values;
 		}
 		else {
 			my $v = Git::config(@repo, "$prefix.$setting");
-			$$target = $v if defined $v;
+			next unless defined $v;
+			next if $configured->{$setting}++;
+			$$target = $v;
 		}
 	}
 
 	if (!defined $smtp_encryption) {
-		my $enc = Git::config(@repo, "$prefix.smtpencryption");
+		my $setting = "$prefix.smtpencryption";
+		my $enc = Git::config(@repo, $setting);
+		return unless defined $enc;
+		return if $configured->{$setting}++;
 		if (defined $enc) {
 			$smtp_encryption = $enc;
 		} elsif (Git::config_bool(@repo, "$prefix.smtpssl")) {
@@ -363,16 +372,29 @@ sub read_config {
 	}
 }
 
+# sendemail.identity yields to --identity. We must parse this
+# special-case first before the rest of the config is read.
 $identity = Git::config(@repo, "sendemail.identity");
-read_config("sendemail.$identity") if defined $identity;
-read_config("sendemail");
+my $rc = GetOptions(
+	"identity=s" => \$identity,
+	"no-identity" => \$no_identity,
+);
+usage() unless $rc;
+undef $identity if $no_identity;
+
+# Now we know enough to read the config
+{
+    my %configured;
+    read_config(\%configured, "sendemail.$identity") if defined $identity;
+    read_config(\%configured, "sendemail");
+}
 
 # Begin by accumulating all the variables (defined above), that we will end up
 # needing, first, from the command line:
 
 my $help;
-my $rc = GetOptions("h" => \$help,
-                    "dump-aliases" => \$dump_aliases);
+$rc = GetOptions("h" => \$help,
+                 "dump-aliases" => \$dump_aliases);
 usage() unless $rc;
 die __("--dump-aliases incompatible with other options\n")
     if !$help and $dump_aliases and @ARGV;
@@ -401,7 +423,6 @@ $rc = GetOptions(
 		    "smtp-debug:i" => \$debug_net_smtp,
 		    "smtp-domain:s" => \$smtp_domain,
 		    "smtp-auth=s" => \$smtp_auth,
-		    "identity=s" => \$identity,
 		    "annotate!" => \$annotate,
 		    "no-annotate" => sub {$annotate = 0},
 		    "compose" => \$compose,
diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh
index 98858e5e4a..4be4b50ff9 100755
--- a/t/t9001-send-email.sh
+++ b/t/t9001-send-email.sh
@@ -1200,6 +1200,61 @@ test_expect_success $PREREQ 'sendemail.to works' '
 	grep "To: Somebody <somebody@ex.com>" stdout
 '
 
+test_expect_success $PREREQ 'setup sendemail.identity' '
+	git config --replace-all sendemail.to "default@example.com" &&
+	git config --replace-all sendemail.isp.to "isp@example.com" &&
+	git config --replace-all sendemail.cloud.to "cloud@example.com"
+'
+
+test_expect_success $PREREQ 'sendemail.identity: reads the correct identity config' '
+	git -c sendemail.identity=cloud send-email \
+		--dry-run \
+		--from="nobody@example.com" \
+		$patches >stdout &&
+	grep "To: cloud@example.com" stdout
+'
+
+test_expect_success $PREREQ 'sendemail.identity: identity overrides sendemail.identity' '
+	git -c sendemail.identity=cloud send-email \
+		--identity=isp \
+		--dry-run \
+		--from="nobody@example.com" \
+		$patches >stdout &&
+	grep "To: isp@example.com" stdout
+'
+
+test_expect_success $PREREQ 'sendemail.identity: --no-identity clears previous identity' '
+	git -c sendemail.identity=cloud send-email \
+		--no-identity \
+		--dry-run \
+		--from="nobody@example.com" \
+		$patches >stdout &&
+	grep "To: default@example.com" stdout
+'
+
+test_expect_success $PREREQ 'sendemail.identity: bool identity variable existance overrides' '
+	git -c sendemail.identity=cloud \
+		-c sendemail.xmailer=true \
+		-c sendemail.cloud.xmailer=false \
+		send-email \
+		--dry-run \
+		--from="nobody@example.com" \
+		$patches >stdout &&
+	grep "To: cloud@example.com" stdout &&
+	! grep "X-Mailer" stdout
+'
+
+test_expect_success $PREREQ 'sendemail.identity: bool variable fallback' '
+	git -c sendemail.identity=cloud \
+		-c sendemail.xmailer=false \
+		send-email \
+		--dry-run \
+		--from="nobody@example.com" \
+		$patches >stdout &&
+	grep "To: cloud@example.com" stdout &&
+	! grep "X-Mailer" stdout
+'
+
 test_expect_success $PREREQ '--no-to overrides sendemail.to' '
 	git send-email \
 		--dry-run \
@@ -1757,6 +1812,15 @@ test_expect_success '--dump-aliases must be used alone' '
 	test_must_fail git send-email --dump-aliases --to=janice@example.com -1 refs/heads/accounting
 '
 
+test_expect_success $PREREQ 'aliases and sendemail.identity' '
+	test_must_fail git \
+		-c sendemail.identity=cloud \
+		-c sendemail.aliasesfile=default-aliases \
+		-c sendemail.cloud.aliasesfile=cloud-aliases \
+		send-email -1 2>stderr &&
+	test_i18ngrep "cloud-aliases" stderr
+'
+
 test_sendmail_aliases () {
 	msg="$1" && shift &&
 	expect="$@" &&
-- 
cgit v1.2.3