aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/ABI
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/ABI')
-rw-r--r--Documentation/ABI/stable/sysfs-block17
-rw-r--r--Documentation/ABI/stable/sysfs-class-backlight7
-rw-r--r--Documentation/ABI/testing/sysfs-class-power43
-rw-r--r--Documentation/ABI/testing/sysfs-class-power-gaokun27
-rw-r--r--Documentation/ABI/testing/sysfs-devices-system-cpu63
-rw-r--r--Documentation/ABI/testing/sysfs-driver-hid-appletb-kbd4
-rw-r--r--Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon28
-rw-r--r--Documentation/ABI/testing/sysfs-driver-qat_ras8
-rw-r--r--Documentation/ABI/testing/sysfs-driver-ufs32
-rw-r--r--Documentation/ABI/testing/sysfs-firmware-acpi21
-rw-r--r--Documentation/ABI/testing/sysfs-fs-erofs8
-rw-r--r--Documentation/ABI/testing/sysfs-kernel-reboot10
12 files changed, 252 insertions, 16 deletions
diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block
index 3879963f0f01..4ba771b56b3b 100644
--- a/Documentation/ABI/stable/sysfs-block
+++ b/Documentation/ABI/stable/sysfs-block
@@ -77,7 +77,7 @@ Description:
What: /sys/block/<disk>/diskseq
Date: February 2021
-Contact: Matteo Croce <mcroce@microsoft.com>
+Contact: Matteo Croce <teknoraver@meta.com>
Description:
The /sys/block/<disk>/diskseq files reports the disk
sequence number, which is a monotonically increasing
@@ -547,6 +547,21 @@ Description:
[RO] Maximum size in bytes of a single element in a DMA
scatter/gather list.
+What: /sys/block/<disk>/queue/max_write_streams
+Date: November 2024
+Contact: linux-block@vger.kernel.org
+Description:
+ [RO] Maximum number of write streams supported, 0 if not
+ supported. If supported, valid values are 1 through
+ max_write_streams, inclusive.
+
+What: /sys/block/<disk>/queue/write_stream_granularity
+Date: November 2024
+Contact: linux-block@vger.kernel.org
+Description:
+ [RO] Granularity of a write stream in bytes. The granularity
+ of a write stream is the size that should be discarded or
+ overwritten together to avoid write amplification in the device.
What: /sys/block/<disk>/queue/max_segments
Date: March 2010
diff --git a/Documentation/ABI/stable/sysfs-class-backlight b/Documentation/ABI/stable/sysfs-class-backlight
index 6102d6bebdf9..40b8c46b95b2 100644
--- a/Documentation/ABI/stable/sysfs-class-backlight
+++ b/Documentation/ABI/stable/sysfs-class-backlight
@@ -26,7 +26,12 @@ Date: March 2006
KernelVersion: 2.6.17
Contact: Richard Purdie <rpurdie@rpsys.net>
Description:
- Show the actual brightness by querying the hardware.
+ Show the actual brightness by querying the hardware. Due
+ to implementation differences in hardware this may not
+ match the value in 'brightness'. For example some hardware
+ may treat blanking differently or have custom power saving
+ features. Userspace should generally use the values in
+ 'brightness' to make decisions.
Users: HAL
What: /sys/class/backlight/<backlight>/max_brightness
diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power
index 2a5c1a09a28f..560124cc3177 100644
--- a/Documentation/ABI/testing/sysfs-class-power
+++ b/Documentation/ABI/testing/sysfs-class-power
@@ -822,3 +822,46 @@ Description:
Each entry is a link to the device which registered the extension.
Access: Read
+
+What: /sys/class/power_supply/max8971-charger/fast_charge_timer
+Date: May 2025
+KernelVersion: 6.15.0
+Contact: Svyatoslav Ryhel <clamor95@gmail.com>
+Description:
+ This entry shows and sets the maximum time the max8971
+ charger operates in fast-charge mode. When the timer expires
+ the device will terminate fast-charge mode (charging current
+ will drop to 0 A) and will trigger interrupt.
+
+ Valid values:
+
+ - 4 - 10 (hours), step by 1
+ - 0: disabled.
+
+What: /sys/class/power_supply/max8971-charger/top_off_threshold_current
+Date: May 2025
+KernelVersion: 6.15.0
+Contact: Svyatoslav Ryhel <clamor95@gmail.com>
+Description:
+ This entry shows and sets the charging current threshold for
+ entering top-off charging mode. When charging current in fast
+ charge mode drops below this value, the charger will trigger
+ interrupt and start top-off charging mode.
+
+ Valid values:
+
+ - 50000 - 200000 (microamps), step by 50000 (rounded down)
+
+What: /sys/class/power_supply/max8971-charger/top_off_timer
+Date: May 2025
+KernelVersion: 6.15.0
+Contact: Svyatoslav Ryhel <clamor95@gmail.com>
+Description:
+ This entry shows and sets the maximum time the max8971
+ charger operates in top-off charge mode. When the timer expires
+ the device will terminate top-off charge mode (charging current
+ will drop to 0 A) and will trigger interrupt.
+
+ Valid values:
+
+ - 0 - 70 (minutes), step by 10 (rounded down)
diff --git a/Documentation/ABI/testing/sysfs-class-power-gaokun b/Documentation/ABI/testing/sysfs-class-power-gaokun
new file mode 100644
index 000000000000..0633aed7b355
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-power-gaokun
@@ -0,0 +1,27 @@
+What: /sys/class/power_supply/gaokun-ec-battery/smart_charge_delay
+Date: March 2025
+KernelVersion: 6.15
+Contact: Pengyu Luo <mitltlatltl@gmail.com>
+Description:
+ This entry allows configuration of smart charging delay.
+
+ Smart charging behavior: when the power adapter is connected
+ for delay hours, battery charging will follow the rules of
+ charge_control_start_threshold and charge_control_end_threshold.
+ For more information about charge control, please refer to
+ sysfs-class-power.
+
+ Access: Read, Write
+
+ Valid values: In hours (non-negative)
+
+What: /sys/class/power_supply/gaokun-ec-battery/battery_adaptive_charge
+Date: March 2025
+KernelVersion: 6.15
+Contact: Pengyu Luo <mitltlatltl@gmail.com>
+Description:
+ This entry allows enabling battery adaptive charging.
+
+ Access: Read, Write
+
+ Valid values: 0 (disabled) or 1 (enabled)
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index 206079d3bd5b..8a4d7ecf46ec 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -111,6 +111,7 @@ What: /sys/devices/system/cpu/cpuidle/available_governors
/sys/devices/system/cpu/cpuidle/current_driver
/sys/devices/system/cpu/cpuidle/current_governor
/sys/devices/system/cpu/cpuidle/current_governer_ro
+ /sys/devices/system/cpu/cpuidle/intel_c1_demotion
Date: September 2007
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
Description: Discover cpuidle policy and mechanism
@@ -132,7 +133,11 @@ Description: Discover cpuidle policy and mechanism
current_governor_ro: (RO) displays current idle policy.
- See Documentation/admin-guide/pm/cpuidle.rst and
+ intel_c1_demotion: (RW) enables/disables the C1 demotion
+ feature on Intel CPUs.
+
+ See Documentation/admin-guide/pm/cpuidle.rst,
+ Documentation/admin-guide/pm/intel_idle.rst, and
Documentation/driver-api/pm/cpuidle.rst for more information.
@@ -268,6 +273,60 @@ Description: Discover CPUs in the same CPU frequency coordination domain
This file is only present if the acpi-cpufreq or the cppc-cpufreq
drivers are in use.
+What: /sys/devices/system/cpu/cpuX/cpufreq/auto_select
+Date: May 2025
+Contact: linux-pm@vger.kernel.org
+Description: Autonomous selection enable
+
+ Read/write interface to control autonomous selection enable
+ Read returns autonomous selection status:
+ 0: autonomous selection is disabled
+ 1: autonomous selection is enabled
+
+ Write 'y' or '1' or 'on' to enable autonomous selection.
+ Write 'n' or '0' or 'off' to disable autonomous selection.
+
+ This file is only present if the cppc-cpufreq driver is in use.
+
+What: /sys/devices/system/cpu/cpuX/cpufreq/auto_act_window
+Date: May 2025
+Contact: linux-pm@vger.kernel.org
+Description: Autonomous activity window
+
+ This file indicates a moving utilization sensitivity window to
+ the platform's autonomous selection policy.
+
+ Read/write an integer represents autonomous activity window (in
+ microseconds) from/to this file. The max value to write is
+ 1270000000 but the max significand is 127. This means that if 128
+ is written to this file, 127 will be stored. If the value is
+ greater than 130, only the first two digits will be saved as
+ significand.
+
+ Writing a zero value to this file enable the platform to
+ determine an appropriate Activity Window depending on the workload.
+
+ Writing to this file only has meaning when Autonomous Selection is
+ enabled.
+
+ This file is only present if the cppc-cpufreq driver is in use.
+
+What: /sys/devices/system/cpu/cpuX/cpufreq/energy_performance_preference_val
+Date: May 2025
+Contact: linux-pm@vger.kernel.org
+Description: Energy performance preference
+
+ Read/write an 8-bit integer from/to this file. This file
+ represents a range of values from 0 (performance preference) to
+ 0xFF (energy efficiency preference) that influences the rate of
+ performance increase/decrease and the result of the hardware's
+ energy efficiency and performance optimization policies.
+
+ Writing to this file only has meaning when Autonomous Selection is
+ enabled.
+
+ This file is only present if the cppc-cpufreq driver is in use.
+
What: /sys/devices/system/cpu/cpu*/cache/index3/cache_disable_{0,1}
Date: August 2008
@@ -511,11 +570,13 @@ Description: information about CPUs heterogeneity.
What: /sys/devices/system/cpu/vulnerabilities
/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+ /sys/devices/system/cpu/vulnerabilities/indirect_target_selection
/sys/devices/system/cpu/vulnerabilities/itlb_multihit
/sys/devices/system/cpu/vulnerabilities/l1tf
/sys/devices/system/cpu/vulnerabilities/mds
/sys/devices/system/cpu/vulnerabilities/meltdown
/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+ /sys/devices/system/cpu/vulnerabilities/old_microcode
/sys/devices/system/cpu/vulnerabilities/reg_file_data_sampling
/sys/devices/system/cpu/vulnerabilities/retbleed
/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-appletb-kbd b/Documentation/ABI/testing/sysfs-driver-hid-appletb-kbd
index 2a19584d091e..8c9718d83e9d 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-appletb-kbd
+++ b/Documentation/ABI/testing/sysfs-driver-hid-appletb-kbd
@@ -1,6 +1,6 @@
What: /sys/bus/hid/drivers/hid-appletb-kbd/<dev>/mode
-Date: September, 2023
-KernelVersion: 6.5
+Date: March, 2025
+KernelVersion: 6.15
Contact: linux-input@vger.kernel.org
Description:
The set of keys displayed on the Touch Bar.
diff --git a/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon
index 9bce281314df..4ca917ac6382 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon
@@ -111,7 +111,7 @@ Description: RO. Package current voltage in millivolt.
What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/temp2_input
Date: March 2025
-KernelVersion: 6.14
+KernelVersion: 6.15
Contact: intel-xe@lists.freedesktop.org
Description: RO. Package temperature in millidegree Celsius.
@@ -119,8 +119,32 @@ Description: RO. Package temperature in millidegree Celsius.
What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/temp3_input
Date: March 2025
-KernelVersion: 6.14
+KernelVersion: 6.15
Contact: intel-xe@lists.freedesktop.org
Description: RO. VRAM temperature in millidegree Celsius.
Only supported for particular Intel Xe graphics platforms.
+
+What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/fan1_input
+Date: March 2025
+KernelVersion: 6.16
+Contact: intel-xe@lists.freedesktop.org
+Description: RO. Fan 1 speed in RPM.
+
+ Only supported for particular Intel Xe graphics platforms.
+
+What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/fan2_input
+Date: March 2025
+KernelVersion: 6.16
+Contact: intel-xe@lists.freedesktop.org
+Description: RO. Fan 2 speed in RPM.
+
+ Only supported for particular Intel Xe graphics platforms.
+
+What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/fan3_input
+Date: March 2025
+KernelVersion: 6.16
+Contact: intel-xe@lists.freedesktop.org
+Description: RO. Fan 3 speed in RPM.
+
+ Only supported for particular Intel Xe graphics platforms.
diff --git a/Documentation/ABI/testing/sysfs-driver-qat_ras b/Documentation/ABI/testing/sysfs-driver-qat_ras
index 176dea1e9c0a..82ceb04445ec 100644
--- a/Documentation/ABI/testing/sysfs-driver-qat_ras
+++ b/Documentation/ABI/testing/sysfs-driver-qat_ras
@@ -4,7 +4,7 @@ KernelVersion: 6.7
Contact: qat-linux@intel.com
Description: (RO) Reports the number of correctable errors detected by the device.
- This attribute is only available for qat_4xxx devices.
+ This attribute is only available for qat_4xxx and qat_6xxx devices.
What: /sys/bus/pci/devices/<BDF>/qat_ras/errors_nonfatal
Date: January 2024
@@ -12,7 +12,7 @@ KernelVersion: 6.7
Contact: qat-linux@intel.com
Description: (RO) Reports the number of non fatal errors detected by the device.
- This attribute is only available for qat_4xxx devices.
+ This attribute is only available for qat_4xxx and qat_6xxx devices.
What: /sys/bus/pci/devices/<BDF>/qat_ras/errors_fatal
Date: January 2024
@@ -20,7 +20,7 @@ KernelVersion: 6.7
Contact: qat-linux@intel.com
Description: (RO) Reports the number of fatal errors detected by the device.
- This attribute is only available for qat_4xxx devices.
+ This attribute is only available for qat_4xxx and qat_6xxx devices.
What: /sys/bus/pci/devices/<BDF>/qat_ras/reset_error_counters
Date: January 2024
@@ -38,4 +38,4 @@ Description: (WO) Write to resets all error counters of a device.
# cat /sys/bus/pci/devices/<BDF>/qat_ras/errors_fatal
0
- This attribute is only available for qat_4xxx devices.
+ This attribute is only available for qat_4xxx and qat_6xxx devices.
diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs
index ae0191295d29..e36d2de16cbd 100644
--- a/Documentation/ABI/testing/sysfs-driver-ufs
+++ b/Documentation/ABI/testing/sysfs-driver-ufs
@@ -1604,3 +1604,35 @@ Description:
prevent the UFS from frequently performing clock gating/ungating.
The attribute is read/write.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_lvl_exception_count
+What: /sys/bus/platform/devices/*.ufs/device_lvl_exception_count
+Date: March 2025
+Contact: Bao D. Nguyen <quic_nguyenb@quicinc.com>
+Description:
+ This attribute is applicable to ufs devices compliant to the
+ JEDEC specifications version 4.1 or later. The
+ device_lvl_exception_count is a counter indicating the number of
+ times the device level exceptions have occurred since the last
+ time this variable is reset. Writing a 0 value to this
+ attribute will reset the device_lvl_exception_count. If the
+ device_lvl_exception_count reads a positive value, the user
+ application should read the device_lvl_exception_id attribute to
+ know more information about the exception.
+
+ The attribute is read/write.
+
+What: /sys/bus/platform/drivers/ufshcd/*/device_lvl_exception_id
+What: /sys/bus/platform/devices/*.ufs/device_lvl_exception_id
+Date: March 2025
+Contact: Bao D. Nguyen <quic_nguyenb@quicinc.com>
+Description:
+ Reading the device_lvl_exception_id returns the
+ qDeviceLevelExceptionID attribute of the ufs device JEDEC
+ specification version 4.1. The definition of the
+ qDeviceLevelExceptionID is the ufs device vendor specific
+ implementation. Refer to the device manufacturer datasheet for
+ more information on the meaning of the qDeviceLevelExceptionID
+ attribute value.
+
+ The attribute is read only.
diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi
index 5249ad5a96d9..f4de60c4134d 100644
--- a/Documentation/ABI/testing/sysfs-firmware-acpi
+++ b/Documentation/ABI/testing/sysfs-firmware-acpi
@@ -248,3 +248,24 @@ Description:
# cat ff_pwr_btn
7 enabled
+What: /sys/firmware/acpi/memory_ranges/rangeX
+Date: February 2025
+Contact: Tony Luck <tony.luck@intel.com>
+Description:
+ On systems with the ACPI MRRM table reports the parameters for
+ each range.
+
+ base: Starting system physical address.
+
+ length: Length of this range in bytes.
+
+ node: NUMA node that this range belongs to. Negative numbers
+ indicate that the node number could not be determined (e.g
+ for an address range that is reserved for future hot add of
+ memory).
+
+ local_region_id: ID associated with access by agents
+ local to this range of addresses.
+
+ remote_region_id: ID associated with access by agents
+ non-local to this range of addresses.
diff --git a/Documentation/ABI/testing/sysfs-fs-erofs b/Documentation/ABI/testing/sysfs-fs-erofs
index b134146d735b..bf3b6299c15e 100644
--- a/Documentation/ABI/testing/sysfs-fs-erofs
+++ b/Documentation/ABI/testing/sysfs-fs-erofs
@@ -27,3 +27,11 @@ Description: Writing to this will drop compression-related caches,
- 1 : invalidate cached compressed folios
- 2 : drop in-memory pclusters
- 3 : drop in-memory pclusters and cached compressed folios
+
+What: /sys/fs/erofs/accel
+Date: May 2025
+Contact: "Bo Liu" <liubo03@inspur.com>
+Description: Used to set or show hardware accelerators in effect
+ and multiple accelerators are separated by '\n'.
+ Supported accelerator(s): qat_deflate.
+ Disable all accelerators with an empty string (echo > accel).
diff --git a/Documentation/ABI/testing/sysfs-kernel-reboot b/Documentation/ABI/testing/sysfs-kernel-reboot
index e117aba46be0..52571fd5ddba 100644
--- a/Documentation/ABI/testing/sysfs-kernel-reboot
+++ b/Documentation/ABI/testing/sysfs-kernel-reboot
@@ -1,7 +1,7 @@
What: /sys/kernel/reboot
Date: November 2020
KernelVersion: 5.11
-Contact: Matteo Croce <mcroce@microsoft.com>
+Contact: Matteo Croce <teknoraver@meta.com>
Description: Interface to set the kernel reboot behavior, similarly to
what can be done via the reboot= cmdline option.
(see Documentation/admin-guide/kernel-parameters.txt)
@@ -9,25 +9,25 @@ Description: Interface to set the kernel reboot behavior, similarly to
What: /sys/kernel/reboot/mode
Date: November 2020
KernelVersion: 5.11
-Contact: Matteo Croce <mcroce@microsoft.com>
+Contact: Matteo Croce <teknoraver@meta.com>
Description: Reboot mode. Valid values are: cold warm hard soft gpio
What: /sys/kernel/reboot/type
Date: November 2020
KernelVersion: 5.11
-Contact: Matteo Croce <mcroce@microsoft.com>
+Contact: Matteo Croce <teknoraver@meta.com>
Description: Reboot type. Valid values are: bios acpi kbd triple efi pci
What: /sys/kernel/reboot/cpu
Date: November 2020
KernelVersion: 5.11
-Contact: Matteo Croce <mcroce@microsoft.com>
+Contact: Matteo Croce <teknoraver@meta.com>
Description: CPU number to use to reboot.
What: /sys/kernel/reboot/force
Date: November 2020
KernelVersion: 5.11
-Contact: Matteo Croce <mcroce@microsoft.com>
+Contact: Matteo Croce <teknoraver@meta.com>
Description: Don't wait for any other CPUs on reboot and
avoid anything that could hang.
generated by cgit v1.2.3 (git 2.39.1) at 2025-12-16 02:24:12 +0000