diff options
Diffstat (limited to 'arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts')
| -rw-r--r-- | arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts | 56 |
1 files changed, 53 insertions, 3 deletions
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts index 41e3e9dd85f5..4de38613b0ea 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts @@ -126,6 +126,17 @@ gpio = <&sgpiom0 154 GPIO_ACTIVE_LOW>; }; }; + + standby_power_regulator: standby-power-regulator { + status = "okay"; + compatible = "regulator-fixed"; + regulator-name = "standby_power"; + gpio = <&gpio0 ASPEED_GPIO(M, 3) GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + regulator-always-on; + }; }; // Enable Primary flash on FMC for bring up activity @@ -216,6 +227,30 @@ status = "okay"; }; +&mdio0 { + status = "okay"; + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&mdio3 { + status = "okay"; + ethphy3: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <2>; + }; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + phy-mode = "rgmii-id"; + phy-handle = <ðphy3>; + pinctrl-0 = <&pinctrl_rgmii1_default>; +}; + &mac2 { status = "okay"; phy-mode = "rmii"; @@ -247,7 +282,7 @@ }; &sgpiom0 { - status="okay"; + status = "okay"; ngpios = <128>; gpio-line-names = "","", @@ -411,7 +446,7 @@ // I2C4 &i2c3 { - status = "disabled"; + status = "okay"; }; // I2C5 @@ -431,6 +466,7 @@ #interrupt-cells = <2>; interrupt-parent = <&gpio1>; interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>; + vcc-supply = <&standby_power_regulator>; gpio-line-names = "RTC_MUX_SEL-O", "PCI_MUX_SEL-O", @@ -464,6 +500,7 @@ #size-cells = <0>; reg = <0x71>; i2c-mux-idle-disconnect; + vdd-supply = <&standby_power_regulator>; imux16: i2c@0 { #address-cells = <1>; @@ -528,6 +565,7 @@ #size-cells = <0>; reg = <0x72>; i2c-mux-idle-disconnect; + vdd-supply = <&standby_power_regulator>; imux20: i2c@0 { #address-cells = <1>; @@ -545,6 +583,7 @@ reg = <0x21>; gpio-controller; #gpio-cells = <2>; + vcc-supply = <&standby_power_regulator>; gpio-line-names = "RST_CX_0_L-O", "RST_CX_1_L-O", @@ -584,6 +623,7 @@ #size-cells = <0>; reg = <0x73>; i2c-mux-idle-disconnect; + vdd-supply = <&standby_power_regulator>; imux24: i2c@0 { #address-cells = <1>; @@ -602,6 +642,7 @@ #size-cells = <0>; reg = <0x70>; i2c-mux-idle-disconnect; + vdd-supply = <&standby_power_regulator>; i2c25mux0: i2c@0 { #address-cells = <1>; @@ -648,6 +689,7 @@ #size-cells = <0>; reg = <0x75>; i2c-mux-idle-disconnect; + vdd-supply = <&standby_power_regulator>; imux28: i2c@0 { #address-cells = <1>; @@ -712,6 +754,7 @@ #size-cells = <0>; reg = <0x76>; i2c-mux-idle-disconnect; + vdd-supply = <&standby_power_regulator>; imux32: i2c@0 { #address-cells = <1>; @@ -729,6 +772,7 @@ reg = <0x21>; gpio-controller; #gpio-cells = <2>; + vcc-supply = <&standby_power_regulator>; gpio-line-names = "SEC_RST_CX_0_L-O", "SEC_RST_CX_1_L-O", @@ -768,6 +812,7 @@ #size-cells = <0>; reg = <0x77>; i2c-mux-idle-disconnect; + vdd-supply = <&standby_power_regulator>; imux36: i2c@0 { #address-cells = <1>; @@ -862,6 +907,7 @@ #interrupt-cells = <2>; interrupt-parent = <&gpio1>; interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>; + vcc-supply = <&standby_power_regulator>; gpio-line-names = "FPGA_THERM_OVERT_L-I", "FPGA_READY_BMC-I", @@ -891,6 +937,7 @@ #interrupt-cells = <2>; interrupt-parent = <&gpio1>; interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>; + vcc-supply = <&standby_power_regulator>; gpio-line-names = "SEC_FPGA_THERM_OVERT_L-I", "SEC_FPGA_READY_BMC-I", @@ -949,6 +996,7 @@ #interrupt-cells = <2>; interrupt-parent = <&gpio1>; interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>; + vcc-supply = <&standby_power_regulator>; gpio-line-names = "IOB_PRSNT_L", "IOB_DP_HPD", @@ -1014,6 +1062,7 @@ #size-cells = <0>; reg = <0x77>; i2c-mux-idle-disconnect; + vdd-supply = <&standby_power_regulator>; e1si2c0: i2c@0 { #address-cells = <1>; @@ -1054,6 +1103,7 @@ #size-cells = <0>; reg = <0x77>; i2c-mux-idle-disconnect; + vdd-supply = <&standby_power_regulator>; e1si2c4: i2c@0 { #address-cells = <1>; @@ -1100,7 +1150,7 @@ /*J0-J7*/ "", "", "", "", "", "", "", "", /*K0-K7*/ "", "", "", "", "", "", "", "", /*L0-L7*/ "", "", "", "", "", "", "", "", - /*M0-M7*/ "PCIE_EP_RST_EN-O", "BMC_FRU_WP-O", "HMC_RESET_L-O", "STBY_POWER_EN-O", + /*M0-M7*/ "PCIE_EP_RST_EN-O", "BMC_FRU_WP-O", "FPGA_RST_L-O", "STBY_POWER_EN-O", "STBY_POWER_PG-I", "PCIE_EP_RST_L-O", "", "", /*N0-N7*/ "", "", "", "", "", "", "", "", /*O0-O7*/ "", "", "", "", "", "", "", "", |