diff options
Diffstat (limited to 'drivers/net/sky2.c')
| -rw-r--r-- | drivers/net/sky2.c | 960 |
1 files changed, 539 insertions, 421 deletions
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 933e87f1cc68..459c845d6648 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -50,19 +50,18 @@ #include "sky2.h" #define DRV_NAME "sky2" -#define DRV_VERSION "1.5" +#define DRV_VERSION "1.9" #define PFX DRV_NAME " " /* * The Yukon II chipset takes 64 bit command blocks (called list elements) * that are organized into three (receive, transmit, status) different rings - * similar to Tigon3. A transmit can require several elements; - * a receive requires one (or two if using 64 bit dma). + * similar to Tigon3. */ -#define RX_LE_SIZE 512 +#define RX_LE_SIZE 1024 #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le)) -#define RX_MAX_PENDING (RX_LE_SIZE/2 - 2) +#define RX_MAX_PENDING (RX_LE_SIZE/6 - 2) #define RX_DEF_PENDING RX_MAX_PENDING #define RX_SKB_ALIGN 8 #define RX_BUF_WRITE 16 @@ -74,7 +73,6 @@ #define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */ #define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le)) -#define ETH_JUMBO_MTU 9000 #define TX_WATCHDOG (5 * HZ) #define NAPI_WEIGHT 64 #define PHY_RETRIES 1000 @@ -90,7 +88,7 @@ static int debug = -1; /* defaults above */ module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); -static int copybreak __read_mostly = 256; +static int copybreak __read_mostly = 128; module_param(copybreak, int, 0); MODULE_PARM_DESC(copybreak, "Receive copy threshold"); @@ -106,6 +104,7 @@ static const struct pci_device_id sky2_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */ + { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, /* DGE-550SX */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, @@ -117,10 +116,17 @@ static const struct pci_device_id sky2_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4365) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, { 0 } }; @@ -190,7 +196,6 @@ static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg) static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) { u16 power_control; - u32 reg1; int vaux; pr_debug("sky2_set_power_state %d\n", state); @@ -223,20 +228,9 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) else sky2_write8(hw, B2_Y2_CLK_GATE, 0); - /* Turn off phy power saving */ - reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); - reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); - - /* looks like this XL is back asswards .. */ - if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) { - reg1 |= PCI_Y2_PHY1_COMA; - if (hw->ports > 1) - reg1 |= PCI_Y2_PHY2_COMA; - } - sky2_pci_write32(hw, PCI_DEV_REG1, reg1); - udelay(100); - if (hw->chip_id == CHIP_ID_YUKON_EC_U) { + u32 reg1; + sky2_pci_write32(hw, PCI_DEV_REG3, 0); reg1 = sky2_pci_read32(hw, PCI_DEV_REG4); reg1 &= P_ASPM_CONTROL_MSK; @@ -248,15 +242,6 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) case PCI_D3hot: case PCI_D3cold: - /* Turn on phy power saving */ - reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); - if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) - reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); - else - reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); - sky2_pci_write32(hw, PCI_DEV_REG1, reg1); - udelay(100); - if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) sky2_write8(hw, B2_Y2_CLK_GATE, 0); else @@ -280,7 +265,7 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); } -static void sky2_phy_reset(struct sky2_hw *hw, unsigned port) +static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port) { u16 reg; @@ -302,7 +287,7 @@ static void sky2_phy_reset(struct sky2_hw *hw, unsigned port) static void sky2_phy_init(struct sky2_hw *hw, unsigned port) { struct sky2_port *sky2 = netdev_priv(hw->dev[port]); - u16 ctrl, ct1000, adv, pg, ledctrl, ledover; + u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg; if (sky2->autoneg == AUTONEG_ENABLE && !(hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) { @@ -321,7 +306,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) } ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); - if (hw->copper) { + if (sky2_is_copper(hw)) { if (hw->chip_id == CHIP_ID_YUKON_FE) { /* enable automatic crossover */ ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1; @@ -338,25 +323,37 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA; } } - gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); } else { /* workaround for deviation #4.88 (CRC errors) */ /* disable Automatic Crossover */ ctrl &= ~PHY_M_PC_MDIX_MSK; - gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); + } - if (hw->chip_id == CHIP_ID_YUKON_XL) { - /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */ - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2); - ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); - ctrl &= ~PHY_M_MAC_MD_MSK; - ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX); - gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); + + /* special setup for PHY 88E1112 Fiber */ + if (hw->chip_id == CHIP_ID_YUKON_XL && !sky2_is_copper(hw)) { + pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); + + /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */ + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2); + ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); + ctrl &= ~PHY_M_MAC_MD_MSK; + ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX); + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); + if (hw->pmd_type == 'P') { /* select page 1 to access Fiber registers */ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 1); + + /* for SFP-module set SIGDET polarity to low */ + ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); + ctrl |= PHY_M_FIB_SIGD_POL; + gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); } + + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); } ctrl = gm_phy_read(hw, port, PHY_MARV_CTRL); @@ -371,9 +368,10 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) ctrl = 0; ct1000 = 0; adv = PHY_AN_CSMA; + reg = 0; if (sky2->autoneg == AUTONEG_ENABLE) { - if (hw->copper) { + if (sky2_is_copper(hw)) { if (sky2->advertising & ADVERTISED_1000baseT_Full) ct1000 |= PHY_M_1000C_AFD; if (sky2->advertising & ADVERTISED_1000baseT_Half) @@ -386,8 +384,12 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) adv |= PHY_M_AN_10_FD; if (sky2->advertising & ADVERTISED_10baseT_Half) adv |= PHY_M_AN_10_HD; - } else /* special defines for FIBER (88E1011S only) */ - adv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD; + } else { /* special defines for FIBER (88E1040S only) */ + if (sky2->advertising & ADVERTISED_1000baseT_Full) + adv |= PHY_M_AN_1000X_AFD; + if (sky2->advertising & ADVERTISED_1000baseT_Half) + adv |= PHY_M_AN_1000X_AHD; + } /* Set Flow-control capabilities */ if (sky2->tx_pause && sky2->rx_pause) @@ -403,21 +405,46 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) /* forced speed/duplex settings */ ct1000 = PHY_M_1000C_MSE; - if (sky2->duplex == DUPLEX_FULL) - ctrl |= PHY_CT_DUP_MD; + /* Disable auto update for duplex flow control and speed */ + reg |= GM_GPCR_AU_ALL_DIS; switch (sky2->speed) { case SPEED_1000: ctrl |= PHY_CT_SP1000; + reg |= GM_GPCR_SPEED_1000; break; case SPEED_100: ctrl |= PHY_CT_SP100; + reg |= GM_GPCR_SPEED_100; break; } + if (sky2->duplex == DUPLEX_FULL) { + reg |= GM_GPCR_DUP_FULL; + ctrl |= PHY_CT_DUP_MD; + } else if (sky2->speed != SPEED_1000 && hw->chip_id != CHIP_ID_YUKON_EC_U) { + /* Turn off flow control for 10/100mbps */ + sky2->rx_pause = 0; + sky2->tx_pause = 0; + } + + if (!sky2->rx_pause) + reg |= GM_GPCR_FC_RX_DIS; + + if (!sky2->tx_pause) + reg |= GM_GPCR_FC_TX_DIS; + + /* Forward pause packets to GMAC? */ + if (sky2->tx_pause || sky2->rx_pause) + sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON); + else + sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); + ctrl |= PHY_CT_RESET; } + gma_write16(hw, port, GM_GP_CTRL, reg); + if (hw->chip_id != CHIP_ID_YUKON_FE) gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000); @@ -521,6 +548,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); } + /* Enable phy interrupt on auto-negotiation complete (or link up) */ if (sky2->autoneg == AUTONEG_ENABLE) gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL); @@ -528,6 +556,29 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); } +static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff) +{ + u32 reg1; + static const u32 phy_power[] + = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD }; + + /* looks like this XL is back asswards .. */ + if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) + onoff = !onoff; + + reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); + + if (onoff) + /* Turn off phy power saving */ + reg1 &= ~phy_power[port]; + else + reg1 |= phy_power[port]; + + sky2_pci_write32(hw, PCI_DEV_REG1, reg1); + sky2_pci_read32(hw, PCI_DEV_REG1); + udelay(100); +} + /* Force a renegotiation */ static void sky2_phy_reinit(struct sky2_port *sky2) { @@ -560,49 +611,11 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) gm_phy_read(hw, 1, PHY_MARV_INT_MASK) != 0); } - if (sky2->autoneg == AUTONEG_DISABLE) { - reg = gma_read16(hw, port, GM_GP_CTRL); - reg |= GM_GPCR_AU_ALL_DIS; - gma_write16(hw, port, GM_GP_CTRL, reg); - gma_read16(hw, port, GM_GP_CTRL); - - switch (sky2->speed) { - case SPEED_1000: - reg &= ~GM_GPCR_SPEED_100; - reg |= GM_GPCR_SPEED_1000; - break; - case SPEED_100: - reg &= ~GM_GPCR_SPEED_1000; - reg |= GM_GPCR_SPEED_100; - break; - case SPEED_10: - reg &= ~(GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100); - break; - } - - if (sky2->duplex == DUPLEX_FULL) - reg |= GM_GPCR_DUP_FULL; - - /* turn off pause in 10/100mbps half duplex */ - else if (sky2->speed != SPEED_1000 && - hw->chip_id != CHIP_ID_YUKON_EC_U) - sky2->tx_pause = sky2->rx_pause = 0; - } else - reg = GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100 | GM_GPCR_DUP_FULL; - - if (!sky2->tx_pause && !sky2->rx_pause) { - sky2_write32(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); - reg |= - GM_GPCR_FC_TX_DIS | GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; - } else if (sky2->tx_pause && !sky2->rx_pause) { - /* disable Rx flow-control */ - reg |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; - } - - gma_write16(hw, port, GM_GP_CTRL, reg); - sky2_read16(hw, SK_REG(port, GMAC_IRQ_SRC)); + /* Enable Transmit FIFO Underrun */ + sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK); + spin_lock_bh(&sky2->phy_lock); sky2_phy_init(hw, port); spin_unlock_bh(&sky2->phy_lock); @@ -754,15 +767,23 @@ static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2) struct sky2_tx_le *le = sky2->tx_le + sky2->tx_prod; sky2->tx_prod = RING_NEXT(sky2->tx_prod, TX_RING_SIZE); + le->ctrl = 0; return le; } +static inline struct tx_ring_info *tx_le_re(struct sky2_port *sky2, + struct sky2_tx_le *le) +{ + return sky2->tx_ring + (le - sky2->tx_le); +} + /* Update chip's next pointer */ static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx) { + q = Y2_QADDR(q, PREF_UNIT_PUT_IDX); wmb(); - sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx); - mmiowb(); + sky2_write16(hw, q, idx); + sky2_read16(hw, q); } @@ -770,6 +791,7 @@ static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2) { struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put; sky2->rx_put = RING_NEXT(sky2->rx_put, RX_LE_SIZE); + le->ctrl = 0; return le; } @@ -779,17 +801,16 @@ static inline u32 high32(dma_addr_t a) return sizeof(a) > sizeof(u32) ? (a >> 16) >> 16 : 0; } -/* Build description to hardware about buffer */ -static void sky2_rx_add(struct sky2_port *sky2, dma_addr_t map) +/* Build description to hardware for one receive segment */ +static void sky2_rx_add(struct sky2_port *sky2, u8 op, + dma_addr_t map, unsigned len) { struct sky2_rx_le *le; u32 hi = high32(map); - u16 len = sky2->rx_bufsize; if (sky2->rx_addr64 != hi) { le = sky2_next_rx(sky2); le->addr = cpu_to_le32(hi); - le->ctrl = 0; le->opcode = OP_ADDR64 | HW_OWNER; sky2->rx_addr64 = high32(map + len); } @@ -797,10 +818,52 @@ static void sky2_rx_add(struct sky2_port *sky2, dma_addr_t map) le = sky2_next_rx(sky2); le->addr = cpu_to_le32((u32) map); le->length = cpu_to_le16(len); - le->ctrl = 0; - le->opcode = OP_PACKET | HW_OWNER; + le->opcode = op | HW_OWNER; +} + +/* Build description to hardware for one possibly fragmented skb */ +static void sky2_rx_submit(struct sky2_port *sky2, + const struct rx_ring_info *re) +{ + int i; + + sky2_rx_add(sky2, OP_PACKET, re->data_addr, sky2->rx_data_size); + + for (i = 0; i < skb_shinfo(re->skb)->nr_frags; i++) + sky2_rx_add(sky2, OP_BUFFER, re->frag_addr[i], PAGE_SIZE); +} + + +static void sky2_rx_map_skb(struct pci_dev *pdev, struct rx_ring_info *re, + unsigned size) +{ + struct sk_buff *skb = re->skb; + int i; + + re->data_addr = pci_map_single(pdev, skb->data, size, PCI_DMA_FROMDEVICE); + pci_unmap_len_set(re, data_size, size); + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) + re->frag_addr[i] = pci_map_page(pdev, + skb_shinfo(skb)->frags[i].page, + skb_shinfo(skb)->frags[i].page_offset, + skb_shinfo(skb)->frags[i].size, + PCI_DMA_FROMDEVICE); } +static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re) +{ + struct sk_buff *skb = re->skb; + int i; + + pci_unmap_single(pdev, re->data_addr, pci_unmap_len(re, data_size), + PCI_DMA_FROMDEVICE); + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) + pci_unmap_page(pdev, re->frag_addr[i], + skb_shinfo(skb)->frags[i].size, + PCI_DMA_FROMDEVICE); +} /* Tell chip where to start receive checksum. * Actually has two checksums, but set both same to avoid possible byte @@ -811,7 +874,7 @@ static void rx_set_checksum(struct sky2_port *sky2) struct sky2_rx_le *le; le = sky2_next_rx(sky2); - le->addr = (ETH_HLEN << 16) | ETH_HLEN; + le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN); le->ctrl = 0; le->opcode = OP_TCPSTART | HW_OWNER; @@ -861,12 +924,10 @@ static void sky2_rx_clean(struct sky2_port *sky2) memset(sky2->rx_le, 0, RX_LE_BYTES); for (i = 0; i < sky2->rx_pending; i++) { - struct ring_info *re = sky2->rx_ring + i; + struct rx_ring_info *re = sky2->rx_ring + i; if (re->skb) { - pci_unmap_single(sky2->hw->pdev, - re->mapaddr, sky2->rx_bufsize, - PCI_DMA_FROMDEVICE); + sky2_rx_unmap_skb(sky2->hw->pdev, re); kfree_skb(re->skb); re->skb = NULL; } @@ -920,13 +981,13 @@ static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp struct sky2_hw *hw = sky2->hw; u16 port = sky2->port; - spin_lock_bh(&sky2->tx_lock); + netif_tx_lock_bh(dev); sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), RX_VLAN_STRIP_ON); sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_VLAN_TAG_ON); sky2->vlgrp = grp; - spin_unlock_bh(&sky2->tx_lock); + netif_tx_unlock_bh(dev); } static void sky2_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) @@ -935,48 +996,69 @@ static void sky2_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) struct sky2_hw *hw = sky2->hw; u16 port = sky2->port; - spin_lock_bh(&sky2->tx_lock); + netif_tx_lock_bh(dev); sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), RX_VLAN_STRIP_OFF); sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_VLAN_TAG_OFF); if (sky2->vlgrp) sky2->vlgrp->vlan_devices[vid] = NULL; - spin_unlock_bh(&sky2->tx_lock); + netif_tx_unlock_bh(dev); } #endif /* + * Allocate an skb for receiving. If the MTU is large enough + * make the skb non-linear with a fragment list of pages. + * * It appears the hardware has a bug in the FIFO logic that * cause it to hang if the FIFO gets overrun and the receive buffer - * is not aligned. ALso alloc_skb() won't align properly if slab - * debugging is enabled. + * is not 64 byte aligned. The buffer returned from netdev_alloc_skb is + * aligned except if slab debugging is enabled. */ -static inline struct sk_buff *sky2_alloc_skb(unsigned int size, gfp_t gfp_mask) +static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2) { struct sk_buff *skb; + unsigned long p; + int i; - skb = alloc_skb(size + RX_SKB_ALIGN, gfp_mask); - if (likely(skb)) { - unsigned long p = (unsigned long) skb->data; - skb_reserve(skb, ALIGN(p, RX_SKB_ALIGN) - p); + skb = netdev_alloc_skb(sky2->netdev, sky2->rx_data_size + RX_SKB_ALIGN); + if (!skb) + goto nomem; + + p = (unsigned long) skb->data; + skb_reserve(skb, ALIGN(p, RX_SKB_ALIGN) - p); + + for (i = 0; i < sky2->rx_nfrags; i++) { + struct page *page = alloc_page(GFP_ATOMIC); + + if (!page) + goto free_partial; + skb_fill_page_desc(skb, i, page, 0, PAGE_SIZE); } return skb; +free_partial: + kfree_skb(skb); +nomem: + return NULL; } /* * Allocate and setup receiver buffer pool. - * In case of 64 bit dma, there are 2X as many list elements - * available as ring entries - * and need to reserve one list element so we don't wrap around. + * Normal case this ends up creating one list element for skb + * in the receive ring. Worst case if using large MTU and each + * allocation falls on a different 64 bit region, that results + * in 6 list elements per ring entry. + * One element is used for checksum enable/disable, and one + * extra to avoid wrap. */ static int sky2_rx_start(struct sky2_port *sky2) { struct sky2_hw *hw = sky2->hw; + struct rx_ring_info *re; unsigned rxq = rxqaddr[sky2->port]; - int i; - unsigned thresh; + unsigned i, size, space, thresh; sky2->rx_put = sky2->rx_next = 0; sky2_qset(hw, rxq); @@ -989,26 +1071,56 @@ static int sky2_rx_start(struct sky2_port *sky2) sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1); rx_set_checksum(sky2); + + /* Space needed for frame data + headers rounded up */ + size = ALIGN(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8) + + 8; + + /* Stopping point for hardware truncation */ + thresh = (size - 8) / sizeof(u32); + + /* Account for overhead of skb - to avoid order > 0 allocation */ + space = SKB_DATA_ALIGN(size) + NET_SKB_PAD + + sizeof(struct skb_shared_info); + + sky2->rx_nfrags = space >> PAGE_SHIFT; + BUG_ON(sky2->rx_nfrags > ARRAY_SIZE(re->frag_addr)); + + if (sky2->rx_nfrags != 0) { + /* Compute residue after pages */ + space = sky2->rx_nfrags << PAGE_SHIFT; + + if (space < size) + size -= space; + else + size = 0; + + /* Optimize to handle small packets and headers */ + if (size < copybreak) + size = copybreak; + if (size < ETH_HLEN) + size = ETH_HLEN; + } + sky2->rx_data_size = size; + + /* Fill Rx ring */ for (i = 0; i < sky2->rx_pending; i++) { - struct ring_info *re = sky2->rx_ring + i; + re = sky2->rx_ring + i; - re->skb = sky2_alloc_skb(sky2->rx_bufsize, GFP_KERNEL); + re->skb = sky2_rx_alloc(sky2); if (!re->skb) goto nomem; - re->mapaddr = pci_map_single(hw->pdev, re->skb->data, - sky2->rx_bufsize, PCI_DMA_FROMDEVICE); - sky2_rx_add(sky2, re->mapaddr); + sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size); + sky2_rx_submit(sky2, re); } - /* * The receiver hangs if it receives frames larger than the * packet buffer. As a workaround, truncate oversize frames, but * the register is limited to 9 bits, so if you do frames > 2052 * you better get the MTU right! */ - thresh = (sky2->rx_bufsize - 8) / sizeof(u32); if (thresh > 0x1ff) sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF); else { @@ -1016,7 +1128,6 @@ static int sky2_rx_start(struct sky2_port *sky2) sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON); } - /* Tell chip about available buffers */ sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put); return 0; @@ -1075,11 +1186,13 @@ static int sky2_up(struct net_device *dev) goto err_out; memset(sky2->rx_le, 0, RX_LE_BYTES); - sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct ring_info), + sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct rx_ring_info), GFP_KERNEL); if (!sky2->rx_ring) goto err_out; + sky2_phy_power(hw, port, 1); + sky2_mac_init(hw, port); /* Determine available ram buffer space (in 4K blocks). @@ -1103,7 +1216,8 @@ static int sky2_up(struct net_device *dev) sky2_qset(hw, txqaddr[port]); /* Set almost empty threshold */ - if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == 1) + if (hw->chip_id == CHIP_ID_YUKON_EC_U + && hw->chip_rev == CHIP_REV_YU_EC_U_A0) sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0); sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map, @@ -1163,7 +1277,7 @@ static unsigned tx_le_req(const struct sk_buff *skb) if (skb_is_gso(skb)) ++count; - if (skb->ip_summed == CHECKSUM_HW) + if (skb->ip_summed == CHECKSUM_PARTIAL) ++count; return count; @@ -1174,8 +1288,6 @@ static unsigned tx_le_req(const struct sk_buff *skb) * A single packet can generate multiple list elements, and * the number of ring elements will probably be less than the number * of list elements used. - * - * No BH disabling for tx_lock here (like tg3) */ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) { @@ -1184,33 +1296,13 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) struct sky2_tx_le *le = NULL; struct tx_ring_info *re; unsigned i, len; - int avail; dma_addr_t mapping; u32 addr64; u16 mss; u8 ctrl; - /* No BH disabling for tx_lock here. We are running in BH disabled - * context and TX reclaim runs via poll inside of a software - * interrupt, and no related locks in IRQ processing. - */ - if (!spin_trylock(&sky2->tx_lock)) - return NETDEV_TX_LOCKED; - - if (unlikely(tx_avail(sky2) < tx_le_req(skb))) { - /* There is a known but harmless race with lockless tx - * and netif_stop_queue. - */ - if (!netif_queue_stopped(dev)) { - netif_stop_queue(dev); - if (net_ratelimit()) - printk(KERN_WARNING PFX "%s: ring full when queue awake!\n", - dev->name); - } - spin_unlock(&sky2->tx_lock); - - return NETDEV_TX_BUSY; - } + if (unlikely(tx_avail(sky2) < tx_le_req(skb))) + return NETDEV_TX_BUSY; if (unlikely(netif_msg_tx_queued(sky2))) printk(KERN_DEBUG "%s: tx queued, slot %u, len %d\n", @@ -1220,13 +1312,10 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE); addr64 = high32(mapping); - re = sky2->tx_ring + sky2->tx_prod; - /* Send high bits if changed or crosses boundary */ if (addr64 != sky2->tx_addr64 || high32(mapping + len) != sky2->tx_addr64) { le = get_tx_le(sky2); - le->tx.addr = cpu_to_le32(addr64); - le->ctrl = 0; + le->addr = cpu_to_le32(addr64); le->opcode = OP_ADDR64 | HW_OWNER; sky2->tx_addr64 = high32(mapping + len); } @@ -1234,25 +1323,16 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) /* Check for TCP Segmentation Offload */ mss = skb_shinfo(skb)->gso_size; if (mss != 0) { - /* just drop the packet if non-linear expansion fails */ - if (skb_header_cloned(skb) && - pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) { - dev_kfree_skb(skb); - goto out_unlock; - } - mss += ((skb->h.th->doff - 5) * 4); /* TCP options */ mss += (skb->nh.iph->ihl * 4) + sizeof(struct tcphdr); mss += ETH_HLEN; - } - if (mss != sky2->tx_last_mss) { - le = get_tx_le(sky2); - le->tx.tso.size = cpu_to_le16(mss); - le->tx.tso.rsvd = 0; - le->opcode = OP_LRGLEN | HW_OWNER; - le->ctrl = 0; - sky2->tx_last_mss = mss; + if (mss != sky2->tx_last_mss) { + le = get_tx_le(sky2); + le->addr = cpu_to_le32(mss); + le->opcode = OP_LRGLEN | HW_OWNER; + sky2->tx_last_mss = mss; + } } ctrl = 0; @@ -1261,9 +1341,8 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) if (sky2->vlgrp && vlan_tx_tag_present(skb)) { if (!le) { le = get_tx_le(sky2); - le->tx.addr = 0; + le->addr = 0; le->opcode = OP_VLAN|HW_OWNER; - le->ctrl = 0; } else le->opcode |= OP_VLAN; le->length = cpu_to_be16(vlan_tx_tag_get(skb)); @@ -1272,73 +1351,72 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) #endif /* Handle TCP checksum offload */ - if (skb->ip_summed == CHECKSUM_HW) { - u16 hdr = skb->h.raw - skb->data; - u16 offset = hdr + skb->csum; + if (skb->ip_summed == CHECKSUM_PARTIAL) { + unsigned offset = skb->h.raw - skb->data; + u32 tcpsum; + + tcpsum = offset << 16; /* sum start */ + tcpsum |= offset + skb->csum; /* sum write */ ctrl = CALSUM | WR_SUM | INIT_SUM | LOCK_SUM; if (skb->nh.iph->protocol == IPPROTO_UDP) ctrl |= UDPTCP; - le = get_tx_le(sky2); - le->tx.csum.start = cpu_to_le16(hdr); - le->tx.csum.offset = cpu_to_le16(offset); - le->length = 0; /* initial checksum value */ - le->ctrl = 1; /* one packet */ - le->opcode = OP_TCPLISW | HW_OWNER; + if (tcpsum != sky2->tx_tcpsum) { + sky2->tx_tcpsum = tcpsum; + + le = get_tx_le(sky2); + le->addr = cpu_to_le32(tcpsum); + le->length = 0; /* initial checksum value */ + le->ctrl = 1; /* one packet */ + le->opcode = OP_TCPLISW | HW_OWNER; + } } le = get_tx_le(sky2); - le->tx.addr = cpu_to_le32((u32) mapping); + le->addr = cpu_to_le32((u32) mapping); le->length = cpu_to_le16(len); le->ctrl = ctrl; le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER); - /* Record the transmit mapping info */ + re = tx_le_re(sky2, le); re->skb = skb; pci_unmap_addr_set(re, mapaddr, mapping); + pci_unmap_len_set(re, maplen, len); for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { - skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; - struct tx_ring_info *fre; + const skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset, frag->size, PCI_DMA_TODEVICE); addr64 = high32(mapping); if (addr64 != sky2->tx_addr64) { le = get_tx_le(sky2); - le->tx.addr = cpu_to_le32(addr64); + le->addr = cpu_to_le32(addr64); le->ctrl = 0; le->opcode = OP_ADDR64 | HW_OWNER; sky2->tx_addr64 = addr64; } le = get_tx_le(sky2); - le->tx.addr = cpu_to_le32((u32) mapping); + le->addr = cpu_to_le32((u32) mapping); le->length = cpu_to_le16(frag->size); le->ctrl = ctrl; le->opcode = OP_BUFFER | HW_OWNER; - fre = sky2->tx_ring - + RING_NEXT((re - sky2->tx_ring) + i, TX_RING_SIZE); - pci_unmap_addr_set(fre, mapaddr, mapping); + re = tx_le_re(sky2, le); + re->skb = skb; + pci_unmap_addr_set(re, mapaddr, mapping); + pci_unmap_len_set(re, maplen, frag->size); } - re->idx = sky2->tx_prod; le->ctrl |= EOP; - avail = tx_avail(sky2); - if (mss != 0 || avail < TX_MIN_PENDING) { - le->ctrl |= FRC_STAT; - if (avail <= MAX_SKB_TX_LE) - netif_stop_queue(dev); - } + if (tx_avail(sky2) <= MAX_SKB_TX_LE) + netif_stop_queue(dev); sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod); -out_unlock: - spin_unlock(&sky2->tx_lock); - dev->trans_start = jiffies; return NETDEV_TX_OK; } @@ -1347,59 +1425,59 @@ out_unlock: * Free ring elements from starting at tx_cons until "done" * * NB: the hardware will tell us about partial completion of multi-part - * buffers; these are deferred until completion. + * buffers so make sure not to free skb to early. */ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) { struct net_device *dev = sky2->netdev; struct pci_dev *pdev = sky2->hw->pdev; - u16 nxt, put; - unsigned i; + unsigned idx; BUG_ON(done >= TX_RING_SIZE); - if (unlikely(netif_msg_tx_done(sky2))) - printk(KERN_DEBUG "%s: tx done, up to %u\n", - dev->name, done); - - for (put = sky2->tx_cons; put != done; put = nxt) { - struct tx_ring_info *re = sky2->tx_ring + put; - struct sk_buff *skb = re->skb; - - nxt = re->idx; - BUG_ON(nxt >= TX_RING_SIZE); - prefetch(sky2->tx_ring + nxt); - - /* Check for partial status */ - if (tx_dist(put, done) < tx_dist(put, nxt)) + for (idx = sky2->tx_cons; idx != done; + idx = RING_NEXT(idx, TX_RING_SIZE)) { + struct sky2_tx_le *le = sky2->tx_le + idx; + struct tx_ring_info *re = sky2->tx_ring + idx; + + switch(le->opcode & ~HW_OWNER) { + case OP_LARGESEND: + case OP_PACKET: + pci_unmap_single(pdev, + pci_unmap_addr(re, mapaddr), + pci_unmap_len(re, maplen), + PCI_DMA_TODEVICE); break; - - skb = re->skb; - pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr), - skb_headlen(skb), PCI_DMA_TODEVICE); - - for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { - struct tx_ring_info *fre; - fre = sky2->tx_ring + RING_NEXT(put + i, TX_RING_SIZE); - pci_unmap_page(pdev, pci_unmap_addr(fre, mapaddr), - skb_shinfo(skb)->frags[i].size, + case OP_BUFFER: + pci_unmap_page(pdev, pci_unmap_addr(re, mapaddr), + pci_unmap_len(re, maplen), PCI_DMA_TODEVICE); + break; } - dev_kfree_skb(skb); + if (le->ctrl & EOP) { + if (unlikely(netif_msg_tx_done(sky2))) + printk(KERN_DEBUG "%s: tx done %u\n", + dev->name, idx); + dev_kfree_skb(re->skb); + } + + le->opcode = 0; /* paranoia */ } - sky2->tx_cons = put; + sky2->tx_cons = idx; if (tx_avail(sky2) > MAX_SKB_TX_LE + 4) netif_wake_queue(dev); } /* Cleanup all untransmitted buffers, assume transmitter not running */ -static void sky2_tx_clean(struct sky2_port *sky2) +static void sky2_tx_clean(struct net_device *dev) { - spin_lock_bh(&sky2->tx_lock); + struct sky2_port *sky2 = netdev_priv(dev); + + netif_tx_lock_bh(dev); sky2_tx_complete(sky2, sky2->tx_prod); - spin_unlock_bh(&sky2->tx_lock); + netif_tx_unlock_bh(dev); } /* Network shutdown */ @@ -1421,7 +1499,7 @@ static int sky2_down(struct net_device *dev) /* Stop more packets from being queued */ netif_stop_queue(dev); - sky2_phy_reset(hw, port); + sky2_gmac_reset(hw, port); /* Stop transmitter */ sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP); @@ -1430,6 +1508,13 @@ static int sky2_down(struct net_device *dev) sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET | RB_DIS_OP_MD); + /* WA for dev. #4.209 */ + if (hw->chip_id == CHIP_ID_YUKON_EC_U + && hw->chip_rev == CHIP_REV_YU_EC_U_A1) + sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), + sky2->speed != SPEED_1000 ? + TX_STFW_ENA : TX_STFW_DIS); + ctrl = gma_read16(hw, port, GM_GP_CTRL); ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA); gma_write16(hw, port, GM_GP_CTRL, ctrl); @@ -1469,12 +1554,14 @@ static int sky2_down(struct net_device *dev) imask &= ~portirq_msk[port]; sky2_write32(hw, B0_IMSK, imask); + sky2_phy_power(hw, port, 0); + /* turn off LED's */ sky2_write16(hw, B0_Y2LED, LED_STAT_OFF); synchronize_irq(hw->pdev->irq); - sky2_tx_clean(sky2); + sky2_tx_clean(dev); sky2_rx_clean(sky2); pci_free_consistent(hw->pdev, RX_LE_BYTES, @@ -1497,7 +1584,7 @@ static int sky2_down(struct net_device *dev) static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux) { - if (!hw->copper) + if (!sky2_is_copper(hw)) return SPEED_1000; if (hw->chip_id == CHIP_ID_YUKON_FE) @@ -1519,40 +1606,10 @@ static void sky2_link_up(struct sky2_port *sky2) unsigned port = sky2->port; u16 reg; - /* Enable Transmit FIFO Underrun */ - sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK); - - reg = gma_read16(hw, port, GM_GP_CTRL); - if (sky2->autoneg == AUTONEG_DISABLE) { - reg |= GM_GPCR_AU_ALL_DIS; - - /* Is write/read necessary? Copied from sky2_mac_init */ - gma_write16(hw, port, GM_GP_CTRL, reg); - gma_read16(hw, port, GM_GP_CTRL); - - switch (sky2->speed) { - case SPEED_1000: - reg &= ~GM_GPCR_SPEED_100; - reg |= GM_GPCR_SPEED_1000; - break; - case SPEED_100: - reg &= ~GM_GPCR_SPEED_1000; - reg |= GM_GPCR_SPEED_100; - break; - case SPEED_10: - reg &= ~(GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100); - break; - } - } else - reg &= ~GM_GPCR_AU_ALL_DIS; - - if (sky2->duplex == DUPLEX_FULL || sky2->autoneg == AUTONEG_ENABLE) - reg |= GM_GPCR_DUP_FULL; - /* enable Rx/Tx */ + reg = gma_read16(hw, port, GM_GP_CTRL); reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA; gma_write16(hw, port, GM_GP_CTRL, reg); - gma_read16(hw, port, GM_GP_CTRL); gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); @@ -1606,7 +1663,6 @@ static void sky2_link_down(struct sky2_port *sky2) reg = gma_read16(hw, port, GM_GP_CTRL); reg &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA); gma_write16(hw, port, GM_GP_CTRL, reg); - gma_read16(hw, port, GM_GP_CTRL); /* PCI post */ if (sky2->rx_pause && !sky2->tx_pause) { /* restore Asymmetric Pause bit */ @@ -1623,6 +1679,7 @@ static void sky2_link_down(struct sky2_port *sky2) if (netif_msg_link(sky2)) printk(KERN_INFO PFX "%s: Link is down.\n", sky2->netdev->name); + sky2_phy_init(hw, port); } @@ -1639,22 +1696,33 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux) return -1; } - if (hw->chip_id != CHIP_ID_YUKON_FE && - gm_phy_read(hw, port, PHY_MARV_1000T_STAT) & PHY_B_1000S_MSF) { - printk(KERN_ERR PFX "%s: master/slave fault", - sky2->netdev->name); - return -1; - } - if (!(aux & PHY_M_PS_SPDUP_RES)) { printk(KERN_ERR PFX "%s: speed/duplex mismatch", sky2->netdev->name); return -1; } - sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF; - sky2->speed = sky2_phy_speed(hw, aux); + if (sky2->speed == SPEED_1000) { + u16 ctl2 = gm_phy_read(hw, port, PHY_MARV_1000T_CTRL); + u16 lpa2 = gm_phy_read(hw, port, PHY_MARV_1000T_STAT); + if (lpa2 & PHY_B_1000S_MSF) { + printk(KERN_ERR PFX "%s: master/slave fault", + sky2->netdev->name); + return -1; + } + + if ((ctl2 & PHY_M_1000C_AFD) && (lpa2 & PHY_B_1000S_LP_FD)) + sky2->duplex = DUPLEX_FULL; + else + sky2->duplex = DUPLEX_HALF; + } else { + u16 adv = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV); + if ((aux & adv) & PHY_AN_FULL) + sky2->duplex = DUPLEX_FULL; + else + sky2->duplex = DUPLEX_HALF; + } /* Pause bits are offset (9..8) */ if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U) @@ -1663,8 +1731,11 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux) sky2->rx_pause = (aux & PHY_M_PS_RX_P_EN) != 0; sky2->tx_pause = (aux & PHY_M_PS_TX_P_EN) != 0; - if ((sky2->tx_pause || sky2->rx_pause) - && !(sky2->speed < SPEED_1000 && sky2->duplex == DUPLEX_HALF)) + if (sky2->duplex == DUPLEX_HALF && sky2->speed != SPEED_1000 + && hw->chip_id != CHIP_ID_YUKON_EC_U) + sky2->rx_pause = sky2->tx_pause = 0; + + if (sky2->rx_pause || sky2->tx_pause) sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON); else sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); @@ -1690,7 +1761,7 @@ static void sky2_phy_intr(struct sky2_hw *hw, unsigned port) printk(KERN_INFO PFX "%s: phy interrupt status 0x%x 0x%x\n", sky2->netdev->name, istatus, phystat); - if (istatus & PHY_M_IS_AN_COMPL) { + if (sky2->autoneg == AUTONEG_ENABLE && (istatus & PHY_M_IS_AN_COMPL)) { if (sky2_autoneg_done(sky2, phystat) == 0) sky2_link_up(sky2); goto out; @@ -1742,31 +1813,22 @@ static void sky2_tx_timeout(struct net_device *dev) } else if (report != sky2->tx_cons) { printk(KERN_INFO PFX "status report lost?\n"); - spin_lock_bh(&sky2->tx_lock); + netif_tx_lock_bh(dev); sky2_tx_complete(sky2, report); - spin_unlock_bh(&sky2->tx_lock); + netif_tx_unlock_bh(dev); } else { printk(KERN_INFO PFX "hardware hung? flushing\n"); sky2_write32(hw, Q_ADDR(txq, Q_CSR), BMU_STOP); sky2_write32(hw, Y2_QADDR(txq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); - sky2_tx_clean(sky2); + sky2_tx_clean(dev); sky2_qset(hw, txq); sky2_prefetch_init(hw, txq, sky2->tx_le_map, TX_RING_SIZE - 1); } } - -/* Want receive buffer size to be multiple of 64 bits - * and incl room for vlan and truncation - */ -static inline unsigned sky2_buf_size(int mtu) -{ - return ALIGN(mtu + ETH_HLEN + VLAN_HLEN, 8) + 8; -} - static int sky2_change_mtu(struct net_device *dev, int new_mtu) { struct sky2_port *sky2 = netdev_priv(dev); @@ -1801,7 +1863,7 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) sky2_rx_clean(sky2); dev->mtu = new_mtu; - sky2->rx_bufsize = sky2_buf_size(new_mtu); + mode = DATA_BLIND_VAL(DATA_BLIND_DEF) | GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF); @@ -1827,20 +1889,105 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) return err; } +/* For small just reuse existing skb for next receive */ +static struct sk_buff *receive_copy(struct sky2_port *sky2, + const struct rx_ring_info *re, + unsigned length) +{ + struct sk_buff *skb; + + skb = netdev_alloc_skb(sky2->netdev, length + 2); + if (likely(skb)) { + skb_reserve(skb, 2); + pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->data_addr, + length, PCI_DMA_FROMDEVICE); + memcpy(skb->data, re->skb->data, length); + skb->ip_summed = re->skb->ip_summed; + skb->csum = re->skb->csum; + pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr, + length, PCI_DMA_FROMDEVICE); + re->skb->ip_summed = CHECKSUM_NONE; + __skb_put(skb, length); + } + return skb; +} + +/* Adjust length of skb with fragments to match received data */ +static void skb_put_frags(struct sk_buff *skb, unsigned int hdr_space, + unsigned int length) +{ + int i, num_frags; + unsigned int size; + + /* put header into skb */ + size = min(length, hdr_space); + skb->tail += size; + skb->len += size; + length -= size; + + num_frags = skb_shinfo(skb)->nr_frags; + for (i = 0; i < num_frags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + if (length == 0) { + /* don't need this page */ + __free_page(frag->page); + --skb_shinfo(skb)->nr_frags; + } else { + size = min(length, (unsigned) PAGE_SIZE); + + frag->size = size; + skb->data_len += size; + skb->truesize += size; + skb->len += size; + length -= size; + } + } +} + +/* Normal packet - take skb from ring element and put in a new one */ +static struct sk_buff *receive_new(struct sky2_port *sky2, + struct rx_ring_info *re, + unsigned int length) +{ + struct sk_buff *skb, *nskb; + unsigned hdr_space = sky2->rx_data_size; + + pr_debug(PFX "receive new length=%d\n", length); + + /* Don't be tricky about reusing pages (yet) */ + nskb = sky2_rx_alloc(sky2); + if (unlikely(!nskb)) + return NULL; + + skb = re->skb; + sky2_rx_unmap_skb(sky2->hw->pdev, re); + + prefetch(skb->data); + re->skb = nskb; + sky2_rx_map_skb(sky2->hw->pdev, re, hdr_space); + + if (skb_shinfo(skb)->nr_frags) + skb_put_frags(skb, hdr_space, length); + else + skb_put(skb, hdr_space); + return skb; +} + /* * Receive one packet. - * For small packets or errors, just reuse existing skb. * For larger packets, get new buffer. */ -static struct sk_buff *sky2_receive(struct sky2_port *sky2, +static struct sk_buff *sky2_receive(struct net_device *dev, u16 length, u32 status) { - struct ring_info *re = sky2->rx_ring + sky2->rx_next; + struct sky2_port *sky2 = netdev_priv(dev); + struct rx_ring_info *re = sky2->rx_ring + sky2->rx_next; struct sk_buff *skb = NULL; if (unlikely(netif_msg_rx_status(sky2))) printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n", - sky2->netdev->name, sky2->rx_next, status, length); + dev->name, sky2->rx_next, status, length); sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending; prefetch(sky2->rx_ring + sky2->rx_next); @@ -1851,43 +1998,15 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2, if (!(status & GMR_FS_RX_OK)) goto resubmit; - if (length > sky2->netdev->mtu + ETH_HLEN) + if (length > dev->mtu + ETH_HLEN) goto oversize; - if (length < copybreak) { - skb = alloc_skb(length + 2, GFP_ATOMIC); - if (!skb) - goto resubmit; - - skb_reserve(skb, 2); - pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->mapaddr, - length, PCI_DMA_FROMDEVICE); - memcpy(skb->data, re->skb->data, length); - skb->ip_summed = re->skb->ip_summed; - skb->csum = re->skb->csum; - pci_dma_sync_single_for_device(sky2->hw->pdev, re->mapaddr, - length, PCI_DMA_FROMDEVICE); - } else { - struct sk_buff *nskb; - - nskb = sky2_alloc_skb(sky2->rx_bufsize, GFP_ATOMIC); - if (!nskb) - goto resubmit; - - skb = re->skb; - re->skb = nskb; - pci_unmap_single(sky2->hw->pdev, re->mapaddr, - sky2->rx_bufsize, PCI_DMA_FROMDEVICE); - prefetch(skb->data); - - re->mapaddr = pci_map_single(sky2->hw->pdev, nskb->data, - sky2->rx_bufsize, PCI_DMA_FROMDEVICE); - } - - skb_put(skb, length); + if (length < copybreak) + skb = receive_copy(sky2, re, length); + else + skb = receive_new(sky2, re, length); resubmit: - re->skb->ip_summed = CHECKSUM_NONE; - sky2_rx_add(sky2, re->mapaddr); + sky2_rx_submit(sky2, re); return skb; @@ -1900,7 +2019,7 @@ error: if (netif_msg_rx_err(sky2) && net_ratelimit()) printk(KERN_INFO PFX "%s: rx error, status 0x%x length %d\n", - sky2->netdev->name, status, length); + dev->name, status, length); if (status & (GMR_FS_LONG_ERR | GMR_FS_UN_SIZE)) sky2->net_stats.rx_length_errors++; @@ -1920,18 +2039,12 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last) struct sky2_port *sky2 = netdev_priv(dev); if (netif_running(dev)) { - spin_lock(&sky2->tx_lock); + netif_tx_lock(dev); sky2_tx_complete(sky2, last); - spin_unlock(&sky2->tx_lock); + netif_tx_unlock(dev); } } -/* Is status ring empty or is there more to do? */ -static inline int sky2_more_work(const struct sky2_hw *hw) -{ - return (hw->st_idx != sky2_read16(hw, STAT_PUT_IDX)); -} - /* Process status response ring */ static int sky2_status_intr(struct sky2_hw *hw, int to_do) { @@ -1955,16 +2068,15 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do) dev = hw->dev[le->link]; sky2 = netdev_priv(dev); - length = le->length; - status = le->status; + length = le16_to_cpu(le->length); + status = le32_to_cpu(le->status); switch (le->opcode & ~HW_OWNER) { case OP_RXSTAT: - skb = sky2_receive(sky2, length, status); + skb = sky2_receive(dev, length, status); if (!skb) break; - skb->dev = dev; skb->protocol = eth_type_trans(skb, dev); dev->last_rx = jiffies; @@ -2000,8 +2112,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do) #endif case OP_RXCHKS: skb = sky2->rx_ring[sky2->rx_next].skb; - skb->ip_summed = CHECKSUM_HW; - skb->csum = le16_to_cpu(status); + skb->ip_summed = CHECKSUM_COMPLETE; + skb->csum = status & 0xffff; break; case OP_TXINDEXLE: @@ -2022,6 +2134,9 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do) } } + /* Fully processed status ring so clear irq */ + sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); + exit_loop: if (buf_write[0]) { sky2 = netdev_priv(hw->dev[0]); @@ -2097,7 +2212,7 @@ static void sky2_hw_intr(struct sky2_hw *hw) sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); sky2_pci_write16(hw, PCI_STATUS, - pci_err | PCI_STATUS_ERROR_BITS); + pci_err | PCI_STATUS_ERROR_BITS); sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); } @@ -2105,7 +2220,8 @@ static void sky2_hw_intr(struct sky2_hw *hw) /* PCI-Express uncorrectable Error occurred */ u32 pex_err; - pex_err = sky2_pci_read32(hw, PEX_UNC_ERR_STAT); + pex_err = sky2_pci_read32(hw, + hw->err_cap + PCI_ERR_UNCOR_STATUS); if (net_ratelimit()) printk(KERN_ERR PFX "%s: pci express error (0x%x)\n", @@ -2113,15 +2229,20 @@ static void sky2_hw_intr(struct sky2_hw *hw) /* clear the interrupt */ sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); - sky2_pci_write32(hw, PEX_UNC_ERR_STAT, - 0xffffffffUL); + sky2_pci_write32(hw, + hw->err_cap + PCI_ERR_UNCOR_STATUS, + 0xffffffffUL); sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); - if (pex_err & PEX_FATAL_ERRORS) { + + /* In case of fatal error mask off to keep from getting stuck */ + if (pex_err & (PCI_ERR_UNC_POISON_TLP | PCI_ERR_UNC_FCP + | PCI_ERR_UNC_DLP)) { u32 hwmsk = sky2_read32(hw, B0_HWE_IMSK); hwmsk &= ~Y2_IS_PCI_EXP; sky2_write32(hw, B0_HWE_IMSK, hwmsk); } + } if (status & Y2_HWE_L1_MASK) @@ -2231,22 +2352,19 @@ static int sky2_poll(struct net_device *dev0, int *budget) sky2_descriptor_error(hw, 1, "transmit", Y2_IS_CHK_TXA2); work_done = sky2_status_intr(hw, work_limit); - *budget -= work_done; - dev0->quota -= work_done; - - if (status & Y2_IS_STAT_BMU) - sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); + if (work_done < work_limit) { + netif_rx_complete(dev0); - if (sky2_more_work(hw)) + sky2_read32(hw, B0_Y2_SP_LISR); + return 0; + } else { + *budget -= work_done; + dev0->quota -= work_done; return 1; - - netif_rx_complete(dev0); - - sky2_read32(hw, B0_Y2_SP_LISR); - return 0; + } } -static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t sky2_intr(int irq, void *dev_id) { struct sky2_hw *hw = dev_id; struct net_device *dev0 = hw->dev[0]; @@ -2303,8 +2421,9 @@ static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk) static int sky2_reset(struct sky2_hw *hw) { u16 status; - u8 t8, pmd_type; + u8 t8; int i; + u32 msk; sky2_write8(hw, B0_CTST, CS_RST_CLR); @@ -2345,13 +2464,15 @@ static int sky2_reset(struct sky2_hw *hw) sky2_write8(hw, B0_CTST, CS_MRST_CLR); /* clear any PEX errors */ - if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) - sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL); - - - pmd_type = sky2_read8(hw, B2_PMD_TYP); - hw->copper = !(pmd_type == 'L' || pmd_type == 'S'); + if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) { + hw->err_cap = pci_find_ext_capability(hw->pdev, PCI_EXT_CAP_ID_ERR); + if (hw->err_cap) + sky2_pci_write32(hw, + hw->err_cap + PCI_ERR_UNCOR_STATUS, + 0xffffffffUL); + } + hw->pmd_type = sky2_read8(hw, B2_PMD_TYP); hw->ports = 1; t8 = sky2_read8(hw, B2_Y2_HW_RES); if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) { @@ -2406,10 +2527,13 @@ static int sky2_reset(struct sky2_hw *hw) sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53); } - sky2_write32(hw, B0_HWE_IMSK, Y2_HWE_ALL_MASK); + msk = Y2_HWE_ALL_MASK; + if (!hw->err_cap) + msk &= ~Y2_IS_PCI_EXP; + sky2_write32(hw, B0_HWE_IMSK, msk); for (i = 0; i < hw->ports; i++) - sky2_phy_reset(hw, i); + sky2_gmac_reset(hw, i); memset(hw->st_le, 0, STATUS_LE_BYTES); hw->st_idx = 0; @@ -2448,21 +2572,22 @@ static int sky2_reset(struct sky2_hw *hw) static u32 sky2_supported_modes(const struct sky2_hw *hw) { - u32 modes; - if (hw->copper) { - modes = SUPPORTED_10baseT_Half - | SUPPORTED_10baseT_Full - | SUPPORTED_100baseT_Half - | SUPPORTED_100baseT_Full - | SUPPORTED_Autoneg | SUPPORTED_TP; + if (sky2_is_copper(hw)) { + u32 modes = SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full + | SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full + | SUPPORTED_Autoneg | SUPPORTED_TP; if (hw->chip_id != CHIP_ID_YUKON_FE) modes |= SUPPORTED_1000baseT_Half - | SUPPORTED_1000baseT_Full; + | SUPPORTED_1000baseT_Full; + return modes; } else - modes = SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE - | SUPPORTED_Autoneg; - return modes; + return SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full + | SUPPORTED_Autoneg + | SUPPORTED_FIBRE; } static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) @@ -2473,7 +2598,7 @@ static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) ecmd->transceiver = XCVR_INTERNAL; ecmd->supported = sky2_supported_modes(hw); ecmd->phy_address = PHY_ADDR_MARV; - if (hw->copper) { + if (sky2_is_copper(hw)) { ecmd->supported = SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half @@ -2482,12 +2607,14 @@ static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) | SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_TP; ecmd->port = PORT_TP; - } else + ecmd->speed = sky2->speed; + } else { + ecmd->speed = SPEED_1000; ecmd->port = PORT_FIBRE; + } ecmd->advertising = sky2->advertising; ecmd->autoneg = sky2->autoneg; - ecmd->speed = sky2->speed; ecmd->duplex = sky2->duplex; return 0; } @@ -2886,7 +3013,6 @@ static int sky2_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *ecmd) { struct sky2_port *sky2 = netdev_priv(dev); - int err = 0; sky2->autoneg = ecmd->autoneg; sky2->tx_pause = ecmd->tx_pause != 0; @@ -2894,7 +3020,7 @@ static int sky2_set_pauseparam(struct net_device *dev, sky2_phy_reinit(sky2); - return err; + return 0; } static int sky2_get_coalesce(struct net_device *dev, @@ -3051,7 +3177,7 @@ static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs, regs->len - B3_RI_WTO_R1); } -static struct ethtool_ops sky2_ethtool_ops = { +static const struct ethtool_ops sky2_ethtool_ops = { .get_settings = sky2_get_settings, .set_settings = sky2_set_settings, .get_drvinfo = sky2_get_drvinfo, @@ -3120,7 +3246,6 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, sky2->hw = hw; sky2->msg_enable = netif_msg_init(debug, default_msg); - spin_lock_init(&sky2->tx_lock); /* Auto speed and flow control */ sky2->autoneg = AUTONEG_ENABLE; sky2->tx_pause = 1; @@ -3133,13 +3258,11 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, spin_lock_init(&sky2->phy_lock); sky2->tx_pending = TX_DEF_PENDING; sky2->rx_pending = RX_DEF_PENDING; - sky2->rx_bufsize = sky2_buf_size(ETH_DATA_LEN); hw->dev[port] = dev; sky2->port = port; - dev->features |= NETIF_F_LLTX; if (hw->chip_id != CHIP_ID_YUKON_EC_U) dev->features |= NETIF_F_TSO; if (highmem) @@ -3175,8 +3298,7 @@ static void __devinit sky2_show_addr(struct net_device *dev) } /* Handle software interrupt used during MSI test */ -static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id, - struct pt_regs *regs) +static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id) { struct sky2_hw *hw = dev_id; u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2); @@ -3200,6 +3322,8 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw) struct pci_dev *pdev = hw->pdev; int err; + init_waitqueue_head (&hw->msi_wait); + sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW); err = request_irq(pdev->irq, sky2_test_intr, IRQF_SHARED, DRV_NAME, hw); @@ -3209,10 +3333,8 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw) return err; } - init_waitqueue_head (&hw->msi_wait); - sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ); - wmb(); + sky2_read8(hw, B0_CTST); wait_event_timeout(hw->msi_wait, hw->msi_detected, HZ/10); @@ -3304,12 +3426,13 @@ static int __devinit sky2_probe(struct pci_dev *pdev, hw->pm_cap = pm_cap; #ifdef __BIG_ENDIAN - /* byte swap descriptors in hardware */ + /* The sk98lin vendor driver uses hardware byte swapping but + * this driver uses software swapping. + */ { u32 reg; - reg = sky2_pci_read32(hw, PCI_DEV_REG2); - reg |= PCI_REV_DESC; + reg &= ~PCI_REV_DESC; sky2_pci_write32(hw, PCI_DEV_REG2, reg); } #endif @@ -3333,6 +3456,14 @@ static int __devinit sky2_probe(struct pci_dev *pdev, if (!dev) goto err_out_free_pci; + if (!disable_msi && pci_enable_msi(pdev) == 0) { + err = sky2_test_msi(hw); + if (err == -EOPNOTSUPP) + pci_disable_msi(pdev); + else if (err) + goto err_out_free_netdev; + } + err = register_netdev(dev); if (err) { printk(KERN_ERR PFX "%s: cannot register net device\n", @@ -3340,6 +3471,14 @@ static int __devinit sky2_probe(struct pci_dev *pdev, goto err_out_free_netdev; } + err = request_irq(pdev->irq, sky2_intr, IRQF_SHARED, dev->name, hw); + if (err) { + printk(KERN_ERR PFX "%s: cannot assign irq %d\n", + pci_name(pdev), pdev->irq); + goto err_out_unregister; + } + sky2_write32(hw, B0_IMSK, Y2_IS_BASE); + sky2_show_addr(dev); if (hw->ports > 1 && (dev1 = sky2_init_netdev(hw, 1, using_dac))) { @@ -3354,23 +3493,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev, } } - if (!disable_msi && pci_enable_msi(pdev) == 0) { - err = sky2_test_msi(hw); - if (err == -EOPNOTSUPP) - pci_disable_msi(pdev); - else if (err) - goto err_out_unregister; - } - - err = request_irq(pdev->irq, sky2_intr, IRQF_SHARED, DRV_NAME, hw); - if (err) { - printk(KERN_ERR PFX "%s: cannot assign irq %d\n", - pci_name(pdev), pdev->irq); - goto err_out_unregister; - } - - sky2_write32(hw, B0_IMSK, Y2_IS_BASE); - setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) hw); sky2_idle_start(hw); @@ -3380,10 +3502,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev, err_out_unregister: pci_disable_msi(pdev); - if (dev1) { - unregister_netdev(dev1); - free_netdev(dev1); - } unregister_netdev(dev); err_out_free_netdev: free_netdev(dev); |