diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/cpufreq/Kconfig.powerpc | 7 | ||||
| -rw-r--r-- | drivers/cpufreq/Makefile | 1 | ||||
| -rw-r--r-- | drivers/cpufreq/maple-cpufreq.c | 242 | ||||
| -rw-r--r-- | drivers/cpuidle/cpuidle-pseries.c | 1 | ||||
| -rw-r--r-- | drivers/edac/Kconfig | 18 | ||||
| -rw-r--r-- | drivers/edac/Makefile | 2 | ||||
| -rw-r--r-- | drivers/edac/amd8111_edac.c | 596 | ||||
| -rw-r--r-- | drivers/edac/amd8111_edac.h | 118 | ||||
| -rw-r--r-- | drivers/edac/amd8131_edac.c | 358 | ||||
| -rw-r--r-- | drivers/edac/amd8131_edac.h | 107 | ||||
| -rw-r--r-- | drivers/macintosh/via-pmu-led.c | 19 | ||||
| -rw-r--r-- | drivers/ps3/ps3-lpm.c | 2 | ||||
| -rw-r--r-- | drivers/ps3/ps3-sys-manager.c | 2 | ||||
| -rw-r--r-- | drivers/ps3/ps3-vuart.c | 4 | ||||
| -rw-r--r-- | drivers/ps3/sys-manager-core.c | 2 |
15 files changed, 16 insertions, 1463 deletions
diff --git a/drivers/cpufreq/Kconfig.powerpc b/drivers/cpufreq/Kconfig.powerpc index 58151ca56695..eb678fa5260a 100644 --- a/drivers/cpufreq/Kconfig.powerpc +++ b/drivers/cpufreq/Kconfig.powerpc @@ -17,13 +17,6 @@ config CPU_FREQ_CBE_PMI frequencies. Using PMI, the processor will not only be able to run at lower speed, but also at lower core voltage. -config CPU_FREQ_MAPLE - bool "Support for Maple 970FX Evaluation Board" - depends on PPC_MAPLE - help - This adds support for frequency switching on Maple 970FX - Evaluation Board and compatible boards (IBM JS2x blades). - config CPU_FREQ_PMAC bool "Support for Apple PowerBooks" depends on ADB_PMU && PPC32 diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 10d7d6e55da8..d35a28dd9463 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -93,7 +93,6 @@ obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o obj-$(CONFIG_CPU_FREQ_CBE) += ppc-cbe-cpufreq.o ppc-cbe-cpufreq-y += ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o obj-$(CONFIG_CPU_FREQ_CBE_PMI) += ppc_cbe_cpufreq_pmi.o -obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o obj-$(CONFIG_QORIQ_CPUFREQ) += qoriq-cpufreq.o obj-$(CONFIG_CPU_FREQ_PMAC) += pmac32-cpufreq.o obj-$(CONFIG_CPU_FREQ_PMAC64) += pmac64-cpufreq.o diff --git a/drivers/cpufreq/maple-cpufreq.c b/drivers/cpufreq/maple-cpufreq.c deleted file mode 100644 index 690da85c4865..000000000000 --- a/drivers/cpufreq/maple-cpufreq.c +++ /dev/null @@ -1,242 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2011 Dmitry Eremin-Solenikov - * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> - * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de> - * - * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs, - * that is iMac G5 and latest single CPU desktop. - */ - -#undef DEBUG - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/cpufreq.h> -#include <linux/init.h> -#include <linux/completion.h> -#include <linux/mutex.h> -#include <linux/time.h> -#include <linux/of.h> - -#define DBG(fmt...) pr_debug(fmt) - -/* see 970FX user manual */ - -#define SCOM_PCR 0x0aa001 /* PCR scom addr */ - -#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */ -#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */ -#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */ -#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */ -#define PCR_SPEED_MASK 0x000e0000U /* speed mask */ -#define PCR_SPEED_SHIFT 17 -#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */ -#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */ -#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */ -#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */ -#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */ -#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */ - -#define SCOM_PSR 0x408001 /* PSR scom addr */ -/* warning: PSR is a 64 bits register */ -#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */ -#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */ -#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */ -#define PSR_CUR_SPEED_SHIFT (56) - -/* - * The G5 only supports two frequencies (Quarter speed is not supported) - */ -#define CPUFREQ_HIGH 0 -#define CPUFREQ_LOW 1 - -static struct cpufreq_frequency_table maple_cpu_freqs[] = { - {0, CPUFREQ_HIGH, 0}, - {0, CPUFREQ_LOW, 0}, - {0, 0, CPUFREQ_TABLE_END}, -}; - -/* Power mode data is an array of the 32 bits PCR values to use for - * the various frequencies, retrieved from the device-tree - */ -static int maple_pmode_cur; - -static const u32 *maple_pmode_data; -static int maple_pmode_max; - -/* - * SCOM based frequency switching for 970FX rev3 - */ -static int maple_scom_switch_freq(int speed_mode) -{ - unsigned long flags; - int to; - - local_irq_save(flags); - - /* Clear PCR high */ - scom970_write(SCOM_PCR, 0); - /* Clear PCR low */ - scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0); - /* Set PCR low */ - scom970_write(SCOM_PCR, PCR_HILO_SELECT | - maple_pmode_data[speed_mode]); - - /* Wait for completion */ - for (to = 0; to < 10; to++) { - unsigned long psr = scom970_read(SCOM_PSR); - - if ((psr & PSR_CMD_RECEIVED) == 0 && - (((psr >> PSR_CUR_SPEED_SHIFT) ^ - (maple_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3) - == 0) - break; - if (psr & PSR_CMD_COMPLETED) - break; - udelay(100); - } - - local_irq_restore(flags); - - maple_pmode_cur = speed_mode; - ppc_proc_freq = maple_cpu_freqs[speed_mode].frequency * 1000ul; - - return 0; -} - -static int maple_scom_query_freq(void) -{ - unsigned long psr = scom970_read(SCOM_PSR); - int i; - - for (i = 0; i <= maple_pmode_max; i++) - if ((((psr >> PSR_CUR_SPEED_SHIFT) ^ - (maple_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0) - break; - return i; -} - -/* - * Common interface to the cpufreq core - */ - -static int maple_cpufreq_target(struct cpufreq_policy *policy, - unsigned int index) -{ - return maple_scom_switch_freq(index); -} - -static unsigned int maple_cpufreq_get_speed(unsigned int cpu) -{ - return maple_cpu_freqs[maple_pmode_cur].frequency; -} - -static int maple_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - cpufreq_generic_init(policy, maple_cpu_freqs, 12000); - return 0; -} - -static struct cpufreq_driver maple_cpufreq_driver = { - .name = "maple", - .flags = CPUFREQ_CONST_LOOPS, - .init = maple_cpufreq_cpu_init, - .verify = cpufreq_generic_frequency_table_verify, - .target_index = maple_cpufreq_target, - .get = maple_cpufreq_get_speed, - .attr = cpufreq_generic_attr, -}; - -static int __init maple_cpufreq_init(void) -{ - struct device_node *cpunode; - unsigned int psize; - unsigned long max_freq; - const u32 *valp; - u32 pvr_hi; - int rc = -ENODEV; - - /* - * Behave here like powermac driver which checks machine compatibility - * to ease merging of two drivers in future. - */ - if (!of_machine_is_compatible("Momentum,Maple") && - !of_machine_is_compatible("Momentum,Apache")) - return 0; - - /* Get first CPU node */ - cpunode = of_cpu_device_node_get(0); - if (cpunode == NULL) { - pr_err("Can't find any CPU 0 node\n"); - goto bail_noprops; - } - - /* Check 970FX for now */ - /* we actually don't care on which CPU to access PVR */ - pvr_hi = PVR_VER(mfspr(SPRN_PVR)); - if (pvr_hi != 0x3c && pvr_hi != 0x44) { - pr_err("Unsupported CPU version (%x)\n", pvr_hi); - goto bail_noprops; - } - - /* Look for the powertune data in the device-tree */ - /* - * On Maple this property is provided by PIBS in dual-processor config, - * not provided by PIBS in CPU0 config and also not provided by SLOF, - * so YMMV - */ - maple_pmode_data = of_get_property(cpunode, "power-mode-data", &psize); - if (!maple_pmode_data) { - DBG("No power-mode-data !\n"); - goto bail_noprops; - } - maple_pmode_max = psize / sizeof(u32) - 1; - - /* - * From what I see, clock-frequency is always the maximal frequency. - * The current driver can not slew sysclk yet, so we really only deal - * with powertune steps for now. We also only implement full freq and - * half freq in this version. So far, I haven't yet seen a machine - * supporting anything else. - */ - valp = of_get_property(cpunode, "clock-frequency", NULL); - if (!valp) - goto bail_noprops; - max_freq = (*valp)/1000; - maple_cpu_freqs[0].frequency = max_freq; - maple_cpu_freqs[1].frequency = max_freq/2; - - /* Force apply current frequency to make sure everything is in - * sync (voltage is right for example). Firmware may leave us with - * a strange setting ... - */ - msleep(10); - maple_pmode_cur = -1; - maple_scom_switch_freq(maple_scom_query_freq()); - - pr_info("Registering Maple CPU frequency driver\n"); - pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", - maple_cpu_freqs[1].frequency/1000, - maple_cpu_freqs[0].frequency/1000, - maple_cpu_freqs[maple_pmode_cur].frequency/1000); - - rc = cpufreq_register_driver(&maple_cpufreq_driver); - -bail_noprops: - of_node_put(cpunode); - - return rc; -} - -module_init(maple_cpufreq_init); - - -MODULE_DESCRIPTION("cpufreq driver for Maple 970FX/970MP boards"); -MODULE_LICENSE("GPL"); diff --git a/drivers/cpuidle/cpuidle-pseries.c b/drivers/cpuidle/cpuidle-pseries.c index 14db9b7d985d..f68c65f1d023 100644 --- a/drivers/cpuidle/cpuidle-pseries.c +++ b/drivers/cpuidle/cpuidle-pseries.c @@ -22,6 +22,7 @@ #include <asm/idle.h> #include <asm/plpar_wrappers.h> #include <asm/rtas.h> +#include <asm/time.h> static struct cpuidle_driver pseries_idle_driver = { .name = "pseries_idle", diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index 81af6c344d6b..06f7b43a6f78 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -311,24 +311,6 @@ config EDAC_CELL Cell Broadband Engine internal memory controller on platform without a hypervisor -config EDAC_AMD8131 - tristate "AMD8131 HyperTransport PCI-X Tunnel" - depends on PCI && PPC_MAPLE - help - Support for error detection and correction on the - AMD8131 HyperTransport PCI-X Tunnel chip. - Note, add more Kconfig dependency if it's adopted - on some machine other than Maple. - -config EDAC_AMD8111 - tristate "AMD8111 HyperTransport I/O Hub" - depends on PCI && PPC_MAPLE - help - Support for error detection and correction on the - AMD8111 HyperTransport I/O Hub chip. - Note, add more Kconfig dependency if it's adopted - on some machine other than Maple. - config EDAC_CPC925 tristate "IBM CPC925 Memory Controller (PPC970FX)" depends on PPC64 diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index faf310eec4a6..f9cf19d8d13d 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -63,8 +63,6 @@ i10nm_edac-y := i10nm_base.o obj-$(CONFIG_EDAC_I10NM) += i10nm_edac.o skx_edac_common.o obj-$(CONFIG_EDAC_CELL) += cell_edac.o -obj-$(CONFIG_EDAC_AMD8111) += amd8111_edac.o -obj-$(CONFIG_EDAC_AMD8131) += amd8131_edac.o obj-$(CONFIG_EDAC_HIGHBANK_MC) += highbank_mc_edac.o obj-$(CONFIG_EDAC_HIGHBANK_L2) += highbank_l2_edac.o diff --git a/drivers/edac/amd8111_edac.c b/drivers/edac/amd8111_edac.c deleted file mode 100644 index a6d3013d5823..000000000000 --- a/drivers/edac/amd8111_edac.c +++ /dev/null @@ -1,596 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * amd8111_edac.c, AMD8111 Hyper Transport chip EDAC kernel module - * - * Copyright (c) 2008 Wind River Systems, Inc. - * - * Authors: Cao Qingtao <qingtao.cao@windriver.com> - * Benjamin Walsh <benjamin.walsh@windriver.com> - * Hu Yongqi <yongqi.hu@windriver.com> - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/bitops.h> -#include <linux/edac.h> -#include <linux/pci_ids.h> -#include <asm/io.h> - -#include "edac_module.h" -#include "amd8111_edac.h" - -#define AMD8111_EDAC_REVISION " Ver: 1.0.0" -#define AMD8111_EDAC_MOD_STR "amd8111_edac" - -#define PCI_DEVICE_ID_AMD_8111_PCI 0x7460 - -enum amd8111_edac_devs { - LPC_BRIDGE = 0, -}; - -enum amd8111_edac_pcis { - PCI_BRIDGE = 0, -}; - -/* Wrapper functions for accessing PCI configuration space */ -static int edac_pci_read_dword(struct pci_dev *dev, int reg, u32 *val32) -{ - int ret; - - ret = pci_read_config_dword(dev, reg, val32); - if (ret != 0) - printk(KERN_ERR AMD8111_EDAC_MOD_STR - " PCI Access Read Error at 0x%x\n", reg); - - return ret; -} - -static void edac_pci_read_byte(struct pci_dev *dev, int reg, u8 *val8) -{ - int ret; - - ret = pci_read_config_byte(dev, reg, val8); - if (ret != 0) - printk(KERN_ERR AMD8111_EDAC_MOD_STR - " PCI Access Read Error at 0x%x\n", reg); -} - -static void edac_pci_write_dword(struct pci_dev *dev, int reg, u32 val32) -{ - int ret; - - ret = pci_write_config_dword(dev, reg, val32); - if (ret != 0) - printk(KERN_ERR AMD8111_EDAC_MOD_STR - " PCI Access Write Error at 0x%x\n", reg); -} - -static void edac_pci_write_byte(struct pci_dev *dev, int reg, u8 val8) -{ - int ret; - - ret = pci_write_config_byte(dev, reg, val8); - if (ret != 0) - printk(KERN_ERR AMD8111_EDAC_MOD_STR - " PCI Access Write Error at 0x%x\n", reg); -} - -/* - * device-specific methods for amd8111 PCI Bridge Controller - * - * Error Reporting and Handling for amd8111 chipset could be found - * in its datasheet 3.1.2 section, P37 - */ -static void amd8111_pci_bridge_init(struct amd8111_pci_info *pci_info) -{ - u32 val32; - struct pci_dev *dev = pci_info->dev; - - /* First clear error detection flags on the host interface */ - - /* Clear SSE/SMA/STA flags in the global status register*/ - edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32); - if (val32 & PCI_STSCMD_CLEAR_MASK) - edac_pci_write_dword(dev, REG_PCI_STSCMD, val32); - - /* Clear CRC and Link Fail flags in HT Link Control reg */ - edac_pci_read_dword(dev, REG_HT_LINK, &val32); - if (val32 & HT_LINK_CLEAR_MASK) - edac_pci_write_dword(dev, REG_HT_LINK, val32); - - /* Second clear all fault on the secondary interface */ - - /* Clear error flags in the memory-base limit reg. */ - edac_pci_read_dword(dev, REG_MEM_LIM, &val32); - if (val32 & MEM_LIMIT_CLEAR_MASK) - edac_pci_write_dword(dev, REG_MEM_LIM, val32); - - /* Clear Discard Timer Expired flag in Interrupt/Bridge Control reg */ - edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32); - if (val32 & PCI_INTBRG_CTRL_CLEAR_MASK) - edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32); - - /* Last enable error detections */ - if (edac_op_state == EDAC_OPSTATE_POLL) { - /* Enable System Error reporting in global status register */ - edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32); - val32 |= PCI_STSCMD_SERREN; - edac_pci_write_dword(dev, REG_PCI_STSCMD, val32); - - /* Enable CRC Sync flood packets to HyperTransport Link */ - edac_pci_read_dword(dev, REG_HT_LINK, &val32); - val32 |= HT_LINK_CRCFEN; - edac_pci_write_dword(dev, REG_HT_LINK, val32); - - /* Enable SSE reporting etc in Interrupt control reg */ - edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32); - val32 |= PCI_INTBRG_CTRL_POLL_MASK; - edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32); - } -} - -static void amd8111_pci_bridge_exit(struct amd8111_pci_info *pci_info) -{ - u32 val32; - struct pci_dev *dev = pci_info->dev; - - if (edac_op_state == EDAC_OPSTATE_POLL) { - /* Disable System Error reporting */ - edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32); - val32 &= ~PCI_STSCMD_SERREN; - edac_pci_write_dword(dev, REG_PCI_STSCMD, val32); - - /* Disable CRC flood packets */ - edac_pci_read_dword(dev, REG_HT_LINK, &val32); - val32 &= ~HT_LINK_CRCFEN; - edac_pci_write_dword(dev, REG_HT_LINK, val32); - - /* Disable DTSERREN/MARSP/SERREN in Interrupt Control reg */ - edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32); - val32 &= ~PCI_INTBRG_CTRL_POLL_MASK; - edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32); - } -} - -static void amd8111_pci_bridge_check(struct edac_pci_ctl_info *edac_dev) -{ - struct amd8111_pci_info *pci_info = edac_dev->pvt_info; - struct pci_dev *dev = pci_info->dev; - u32 val32; - - /* Check out PCI Bridge Status and Command Register */ - edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32); - if (val32 & PCI_STSCMD_CLEAR_MASK) { - printk(KERN_INFO "Error(s) in PCI bridge status and command" - "register on device %s\n", pci_info->ctl_name); - printk(KERN_INFO "SSE: %d, RMA: %d, RTA: %d\n", - (val32 & PCI_STSCMD_SSE) != 0, - (val32 & PCI_STSCMD_RMA) != 0, - (val32 & PCI_STSCMD_RTA) != 0); - - val32 |= PCI_STSCMD_CLEAR_MASK; - edac_pci_write_dword(dev, REG_PCI_STSCMD, val32); - - edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); - } - - /* Check out HyperTransport Link Control Register */ - edac_pci_read_dword(dev, REG_HT_LINK, &val32); - if (val32 & HT_LINK_LKFAIL) { - printk(KERN_INFO "Error(s) in hypertransport link control" - "register on device %s\n", pci_info->ctl_name); - printk(KERN_INFO "LKFAIL: %d\n", - (val32 & HT_LINK_LKFAIL) != 0); - - val32 |= HT_LINK_LKFAIL; - edac_pci_write_dword(dev, REG_HT_LINK, val32); - - edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); - } - - /* Check out PCI Interrupt and Bridge Control Register */ - edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32); - if (val32 & PCI_INTBRG_CTRL_DTSTAT) { - printk(KERN_INFO "Error(s) in PCI interrupt and bridge control" - "register on device %s\n", pci_info->ctl_name); - printk(KERN_INFO "DTSTAT: %d\n", - (val32 & PCI_INTBRG_CTRL_DTSTAT) != 0); - - val32 |= PCI_INTBRG_CTRL_DTSTAT; - edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32); - - edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); - } - - /* Check out PCI Bridge Memory Base-Limit Register */ - edac_pci_read_dword(dev, REG_MEM_LIM, &val32); - if (val32 & MEM_LIMIT_CLEAR_MASK) { - printk(KERN_INFO - "Error(s) in mem limit register on %s device\n", - pci_info->ctl_name); - printk(KERN_INFO "DPE: %d, RSE: %d, RMA: %d\n" - "RTA: %d, STA: %d, MDPE: %d\n", - (val32 & MEM_LIMIT_DPE) != 0, - (val32 & MEM_LIMIT_RSE) != 0, - (val32 & MEM_LIMIT_RMA) != 0, - (val32 & MEM_LIMIT_RTA) != 0, - (val32 & MEM_LIMIT_STA) != 0, - (val32 & MEM_LIMIT_MDPE) != 0); - - val32 |= MEM_LIMIT_CLEAR_MASK; - edac_pci_write_dword(dev, REG_MEM_LIM, val32); - - edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); - } -} - -static struct resource *legacy_io_res; -static int at_compat_reg_broken; -#define LEGACY_NR_PORTS 1 - -/* device-specific methods for amd8111 LPC Bridge device */ -static void amd8111_lpc_bridge_init(struct amd8111_dev_info *dev_info) -{ - u8 val8; - struct pci_dev *dev = dev_info->dev; - - /* First clear REG_AT_COMPAT[SERR, IOCHK] if necessary */ - legacy_io_res = request_region(REG_AT_COMPAT, LEGACY_NR_PORTS, - AMD8111_EDAC_MOD_STR); - if (!legacy_io_res) - printk(KERN_INFO "%s: failed to request legacy I/O region " - "start %d, len %d\n", __func__, - REG_AT_COMPAT, LEGACY_NR_PORTS); - else { - val8 = __do_inb(REG_AT_COMPAT); - if (val8 == 0xff) { /* buggy port */ - printk(KERN_INFO "%s: port %d is buggy, not supported" - " by hardware?\n", __func__, REG_AT_COMPAT); - at_compat_reg_broken = 1; - release_region(REG_AT_COMPAT, LEGACY_NR_PORTS); - legacy_io_res = NULL; - } else { - u8 out8 = 0; - if (val8 & AT_COMPAT_SERR) - out8 = AT_COMPAT_CLRSERR; - if (val8 & AT_COMPAT_IOCHK) - out8 |= AT_COMPAT_CLRIOCHK; - if (out8 > 0) - __do_outb(out8, REG_AT_COMPAT); - } - } - - /* Second clear error flags on LPC bridge */ - edac_pci_read_byte(dev, REG_IO_CTRL_1, &val8); - if (val8 & IO_CTRL_1_CLEAR_MASK) - edac_pci_write_byte(dev, REG_IO_CTRL_1, val8); -} - -static void amd8111_lpc_bridge_exit(struct amd8111_dev_info *dev_info) -{ - if (legacy_io_res) - release_region(REG_AT_COMPAT, LEGACY_NR_PORTS); -} - -static void amd8111_lpc_bridge_check(struct edac_device_ctl_info *edac_dev) -{ - struct amd8111_dev_info *dev_info = edac_dev->pvt_info; - struct pci_dev *dev = dev_info->dev; - u8 val8; - - edac_pci_read_byte(dev, REG_IO_CTRL_1, &val8); - if (val8 & IO_CTRL_1_CLEAR_MASK) { - printk(KERN_INFO - "Error(s) in IO control register on %s device\n", - dev_info->ctl_name); - printk(KERN_INFO "LPC ERR: %d, PW2LPC: %d\n", - (val8 & IO_CTRL_1_LPC_ERR) != 0, - (val8 & IO_CTRL_1_PW2LPC) != 0); - - val8 |= IO_CTRL_1_CLEAR_MASK; - edac_pci_write_byte(dev, REG_IO_CTRL_1, val8); - - edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name); - } - - if (at_compat_reg_broken == 0) { - u8 out8 = 0; - val8 = __do_inb(REG_AT_COMPAT); - if (val8 & AT_COMPAT_SERR) - out8 = AT_COMPAT_CLRSERR; - if (val8 & AT_COMPAT_IOCHK) - out8 |= AT_COMPAT_CLRIOCHK; - if (out8 > 0) { - __do_outb(out8, REG_AT_COMPAT); - edac_device_handle_ue(edac_dev, 0, 0, - edac_dev->ctl_name); - } - } -} - -/* General devices represented by edac_device_ctl_info */ -static struct amd8111_dev_info amd8111_devices[] = { - [LPC_BRIDGE] = { - .err_dev = PCI_DEVICE_ID_AMD_8111_LPC, - .ctl_name = "lpc", - .init = amd8111_lpc_bridge_init, - .exit = amd8111_lpc_bridge_exit, - .check = amd8111_lpc_bridge_check, - }, - {0}, -}; - -/* PCI controllers represented by edac_pci_ctl_info */ -static struct amd8111_pci_info amd8111_pcis[] = { - [PCI_BRIDGE] = { - .err_dev = PCI_DEVICE_ID_AMD_8111_PCI, - .ctl_name = "AMD8111_PCI_Controller", - .init = amd8111_pci_bridge_init, - .exit = amd8111_pci_bridge_exit, - .check = amd8111_pci_bridge_check, - }, - {0}, -}; - -static int amd8111_dev_probe(struct pci_dev *dev, - const struct pci_device_id *id) -{ - struct amd8111_dev_info *dev_info = &amd8111_devices[id->driver_data]; - int ret = -ENODEV; - - dev_info->dev = pci_get_device(PCI_VENDOR_ID_AMD, - dev_info->err_dev, NULL); - - if (!dev_info->dev) { - printk(KERN_ERR "EDAC device not found:" - "vendor %x, device %x, name %s\n", - PCI_VENDOR_ID_AMD, dev_info->err_dev, - dev_info->ctl_name); - goto err; - } - - if (pci_enable_device(dev_info->dev)) { - printk(KERN_ERR "failed to enable:" - "vendor %x, device %x, name %s\n", - PCI_VENDOR_ID_AMD, dev_info->err_dev, - dev_info->ctl_name); - goto err_dev_put; - } - - /* - * we do not allocate extra private structure for - * edac_device_ctl_info, but make use of existing - * one instead. - */ - dev_info->edac_idx = edac_device_alloc_index(); - dev_info->edac_dev = - edac_device_alloc_ctl_info(0, dev_info->ctl_name, 1, - NULL, 0, 0, dev_info->edac_idx); - if (!dev_info->edac_dev) { - ret = -ENOMEM; - goto err_dev_put; - } - - dev_info->edac_dev->pvt_info = dev_info; - dev_info->edac_dev->dev = &dev_info->dev->dev; - dev_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR; - dev_info->edac_dev->ctl_name = dev_info->ctl_name; - dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev); - - if (edac_op_state == EDAC_OPSTATE_POLL) - dev_info->edac_dev->edac_check = dev_info->check; - - if (dev_info->init) - dev_info->init(dev_info); - - if (edac_device_add_device(dev_info->edac_dev) > 0) { - printk(KERN_ERR "failed to add edac_dev for %s\n", - dev_info->ctl_name); - goto err_edac_free_ctl; - } - - printk(KERN_INFO "added one edac_dev on AMD8111 " - "vendor %x, device %x, name %s\n", - PCI_VENDOR_ID_AMD, dev_info->err_dev, - dev_info->ctl_name); - - return 0; - -err_edac_free_ctl: - edac_device_free_ctl_info(dev_info->edac_dev); -err_dev_put: - pci_dev_put(dev_info->dev); -err: - return ret; -} - -static void amd8111_dev_remove(struct pci_dev *dev) -{ - struct amd8111_dev_info *dev_info; - - for (dev_info = amd8111_devices; dev_info->err_dev; dev_info++) - if (dev_info->dev->device == dev->device) - break; - - if (!dev_info->err_dev) /* should never happen */ - return; - - if (dev_info->edac_dev) { - edac_device_del_device(dev_info->edac_dev->dev); - edac_device_free_ctl_info(dev_info->edac_dev); - } - - if (dev_info->exit) - dev_info->exit(dev_info); - - pci_dev_put(dev_info->dev); -} - -static int amd8111_pci_probe(struct pci_dev *dev, - const struct pci_device_id *id) -{ - struct amd8111_pci_info *pci_info = &amd8111_pcis[id->driver_data]; - int ret = -ENODEV; - - pci_info->dev = pci_get_device(PCI_VENDOR_ID_AMD, - pci_info->err_dev, NULL); - - if (!pci_info->dev) { - printk(KERN_ERR "EDAC device not found:" - "vendor %x, device %x, name %s\n", - PCI_VENDOR_ID_AMD, pci_info->err_dev, - pci_info->ctl_name); - goto err; - } - - if (pci_enable_device(pci_info->dev)) { - printk(KERN_ERR "failed to enable:" - "vendor %x, device %x, name %s\n", - PCI_VENDOR_ID_AMD, pci_info->err_dev, - pci_info->ctl_name); - goto err_dev_put; - } - - /* - * we do not allocate extra private structure for - * edac_pci_ctl_info, but make use of existing - * one instead. - */ - pci_info->edac_idx = edac_pci_alloc_index(); - pci_info->edac_dev = edac_pci_alloc_ctl_info(0, pci_info->ctl_name); - if (!pci_info->edac_dev) { - ret = -ENOMEM; - goto err_dev_put; - } - - pci_info->edac_dev->pvt_info = pci_info; - pci_info->edac_dev->dev = &pci_info->dev->dev; - pci_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR; - pci_info->edac_dev->ctl_name = pci_info->ctl_name; - pci_info->edac_dev->dev_name = dev_name(&pci_info->dev->dev); - - if (edac_op_state == EDAC_OPSTATE_POLL) - pci_info->edac_dev->edac_check = pci_info->check; - - if (pci_info->init) - pci_info->init(pci_info); - - if (edac_pci_add_device(pci_info->edac_dev, pci_info->edac_idx) > 0) { - printk(KERN_ERR "failed to add edac_pci for %s\n", - pci_info->ctl_name); - goto err_edac_free_ctl; - } - - printk(KERN_INFO "added one edac_pci on AMD8111 " - "vendor %x, device %x, name %s\n", - PCI_VENDOR_ID_AMD, pci_info->err_dev, - pci_info->ctl_name); - - return 0; - -err_edac_free_ctl: - edac_pci_free_ctl_info(pci_info->edac_dev); -err_dev_put: - pci_dev_put(pci_info->dev); -err: - return ret; -} - -static void amd8111_pci_remove(struct pci_dev *dev) -{ - struct amd8111_pci_info *pci_info; - - for (pci_info = amd8111_pcis; pci_info->err_dev; pci_info++) - if (pci_info->dev->device == dev->device) - break; - - if (!pci_info->err_dev) /* should never happen */ - return; - - if (pci_info->edac_dev) { - edac_pci_del_device(pci_info->edac_dev->dev); - edac_pci_free_ctl_info(pci_info->edac_dev); - } - - if (pci_info->exit) - pci_info->exit(pci_info); - - pci_dev_put(pci_info->dev); -} - -/* PCI Device ID talbe for general EDAC device */ -static const struct pci_device_id amd8111_edac_dev_tbl[] = { - { - PCI_VEND_DEV(AMD, 8111_LPC), - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .class = 0, - .class_mask = 0, - .driver_data = LPC_BRIDGE, - }, - { - 0, - } /* table is NULL-terminated */ -}; -MODULE_DEVICE_TABLE(pci, amd8111_edac_dev_tbl); - -static struct pci_driver amd8111_edac_dev_driver = { - .name = "AMD8111_EDAC_DEV", - .probe = amd8111_dev_probe, - .remove = amd8111_dev_remove, - .id_table = amd8111_edac_dev_tbl, -}; - -/* PCI Device ID table for EDAC PCI controller */ -static const struct pci_device_id amd8111_edac_pci_tbl[] = { - { - PCI_VEND_DEV(AMD, 8111_PCI), - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .class = 0, - .class_mask = 0, - .driver_data = PCI_BRIDGE, - }, - { - 0, - } /* table is NULL-terminated */ -}; -MODULE_DEVICE_TABLE(pci, amd8111_edac_pci_tbl); - -static struct pci_driver amd8111_edac_pci_driver = { - .name = "AMD8111_EDAC_PCI", - .probe = amd8111_pci_probe, - .remove = amd8111_pci_remove, - .id_table = amd8111_edac_pci_tbl, -}; - -static int __init amd8111_edac_init(void) -{ - int val; - - printk(KERN_INFO "AMD8111 EDAC driver " AMD8111_EDAC_REVISION "\n"); - printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc.\n"); - - /* Only POLL mode supported so far */ - edac_op_state = EDAC_OPSTATE_POLL; - - val = pci_register_driver(&amd8111_edac_dev_driver); - val |= pci_register_driver(&amd8111_edac_pci_driver); - - return val; -} - -static void __exit amd8111_edac_exit(void) -{ - pci_unregister_driver(&amd8111_edac_pci_driver); - pci_unregister_driver(&amd8111_edac_dev_driver); -} - - -module_init(amd8111_edac_init); -module_exit(amd8111_edac_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Cao Qingtao <qingtao.cao@windriver.com>"); -MODULE_DESCRIPTION("AMD8111 HyperTransport I/O Hub EDAC kernel module"); diff --git a/drivers/edac/amd8111_edac.h b/drivers/edac/amd8111_edac.h deleted file mode 100644 index 200cab1b3e42..000000000000 --- a/drivers/edac/amd8111_edac.h +++ /dev/null @@ -1,118 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * amd8111_edac.h, EDAC defs for AMD8111 hypertransport chip - * - * Copyright (c) 2008 Wind River Systems, Inc. - * - * Authors: Cao Qingtao <qingtao.cao@windriver.com> - * Benjamin Walsh <benjamin.walsh@windriver.com> - * Hu Yongqi <yongqi.hu@windriver.com> - */ - -#ifndef _AMD8111_EDAC_H_ -#define _AMD8111_EDAC_H_ - -/************************************************************ - * PCI Bridge Status and Command Register, DevA:0x04 - ************************************************************/ -#define REG_PCI_STSCMD 0x04 -enum pci_stscmd_bits { - PCI_STSCMD_SSE = BIT(30), - PCI_STSCMD_RMA = BIT(29), - PCI_STSCMD_RTA = BIT(28), - PCI_STSCMD_SERREN = BIT(8), - PCI_STSCMD_CLEAR_MASK = (PCI_STSCMD_SSE | - PCI_STSCMD_RMA | - PCI_STSCMD_RTA) -}; - -/************************************************************ - * PCI Bridge Memory Base-Limit Register, DevA:0x1c - ************************************************************/ -#define REG_MEM_LIM 0x1c -enum mem_limit_bits { - MEM_LIMIT_DPE = BIT(31), - MEM_LIMIT_RSE = BIT(30), - MEM_LIMIT_RMA = BIT(29), - MEM_LIMIT_RTA = BIT(28), - MEM_LIMIT_STA = BIT(27), - MEM_LIMIT_MDPE = BIT(24), - MEM_LIMIT_CLEAR_MASK = (MEM_LIMIT_DPE | - MEM_LIMIT_RSE | - MEM_LIMIT_RMA | - MEM_LIMIT_RTA | - MEM_LIMIT_STA | - MEM_LIMIT_MDPE) -}; - -/************************************************************ - * HyperTransport Link Control Register, DevA:0xc4 - ************************************************************/ -#define REG_HT_LINK 0xc4 -enum ht_link_bits { - HT_LINK_LKFAIL = BIT(4), - HT_LINK_CRCFEN = BIT(1), - HT_LINK_CLEAR_MASK = (HT_LINK_LKFAIL) -}; - -/************************************************************ - * PCI Bridge Interrupt and Bridge Control, DevA:0x3c - ************************************************************/ -#define REG_PCI_INTBRG_CTRL 0x3c -enum pci_intbrg_ctrl_bits { - PCI_INTBRG_CTRL_DTSERREN = BIT(27), - PCI_INTBRG_CTRL_DTSTAT = BIT(26), - PCI_INTBRG_CTRL_MARSP = BIT(21), - PCI_INTBRG_CTRL_SERREN = BIT(17), - PCI_INTBRG_CTRL_PEREN = BIT(16), - PCI_INTBRG_CTRL_CLEAR_MASK = (PCI_INTBRG_CTRL_DTSTAT), - PCI_INTBRG_CTRL_POLL_MASK = (PCI_INTBRG_CTRL_DTSERREN | - PCI_INTBRG_CTRL_MARSP | - PCI_INTBRG_CTRL_SERREN) -}; - -/************************************************************ - * I/O Control 1 Register, DevB:0x40 - ************************************************************/ -#define REG_IO_CTRL_1 0x40 -enum io_ctrl_1_bits { - IO_CTRL_1_NMIONERR = BIT(7), - IO_CTRL_1_LPC_ERR = BIT(6), - IO_CTRL_1_PW2LPC = BIT(1), - IO_CTRL_1_CLEAR_MASK = (IO_CTRL_1_LPC_ERR | IO_CTRL_1_PW2LPC) -}; - -/************************************************************ - * Legacy I/O Space Registers - ************************************************************/ -#define REG_AT_COMPAT 0x61 -enum at_compat_bits { - AT_COMPAT_SERR = BIT(7), - AT_COMPAT_IOCHK = BIT(6), - AT_COMPAT_CLRIOCHK = BIT(3), - AT_COMPAT_CLRSERR = BIT(2), -}; - -struct amd8111_dev_info { - u16 err_dev; /* PCI Device ID */ - struct pci_dev *dev; - int edac_idx; /* device index */ - char *ctl_name; - struct edac_device_ctl_info *edac_dev; - void (*init)(struct amd8111_dev_info *dev_info); - void (*exit)(struct amd8111_dev_info *dev_info); - void (*check)(struct edac_device_ctl_info *edac_dev); -}; - -struct amd8111_pci_info { - u16 err_dev; /* PCI Device ID */ - struct pci_dev *dev; - int edac_idx; /* pci index */ - const char *ctl_name; - struct edac_pci_ctl_info *edac_dev; - void (*init)(struct amd8111_pci_info *dev_info); - void (*exit)(struct amd8111_pci_info *dev_info); - void (*check)(struct edac_pci_ctl_info *edac_dev); -}; - -#endif /* _AMD8111_EDAC_H_ */ diff --git a/drivers/edac/amd8131_edac.c b/drivers/edac/amd8131_edac.c deleted file mode 100644 index 28610ba514f4..000000000000 --- a/drivers/edac/amd8131_edac.c +++ /dev/null @@ -1,358 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * amd8131_edac.c, AMD8131 hypertransport chip EDAC kernel module - * - * Copyright (c) 2008 Wind River Systems, Inc. - * - * Authors: Cao Qingtao <qingtao.cao@windriver.com> - * Benjamin Walsh <benjamin.walsh@windriver.com> - * Hu Yongqi <yongqi.hu@windriver.com> - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/bitops.h> -#include <linux/edac.h> -#include <linux/pci_ids.h> - -#include "edac_module.h" -#include "amd8131_edac.h" - -#define AMD8131_EDAC_REVISION " Ver: 1.0.0" -#define AMD8131_EDAC_MOD_STR "amd8131_edac" - -/* Wrapper functions for accessing PCI configuration space */ -static void edac_pci_read_dword(struct pci_dev *dev, int reg, u32 *val32) -{ - int ret; - - ret = pci_read_config_dword(dev, reg, val32); - if (ret != 0) - printk(KERN_ERR AMD8131_EDAC_MOD_STR - " PCI Access Read Error at 0x%x\n", reg); -} - -static void edac_pci_write_dword(struct pci_dev *dev, int reg, u32 val32) -{ - int ret; - - ret = pci_write_config_dword(dev, reg, val32); - if (ret != 0) - printk(KERN_ERR AMD8131_EDAC_MOD_STR - " PCI Access Write Error at 0x%x\n", reg); -} - -/* Support up to two AMD8131 chipsets on a platform */ -static struct amd8131_dev_info amd8131_devices[] = { - { - .inst = NORTH_A, - .devfn = DEVFN_PCIX_BRIDGE_NORTH_A, - .ctl_name = "AMD8131_PCIX_NORTH_A", - }, - { - .inst = NORTH_B, - .devfn = DEVFN_PCIX_BRIDGE_NORTH_B, - .ctl_name = "AMD8131_PCIX_NORTH_B", - }, - { - .inst = SOUTH_A, - .devfn = DEVFN_PCIX_BRIDGE_SOUTH_A, - .ctl_name = "AMD8131_PCIX_SOUTH_A", - }, - { - .inst = SOUTH_B, - .devfn = DEVFN_PCIX_BRIDGE_SOUTH_B, - .ctl_name = "AMD8131_PCIX_SOUTH_B", - }, - {.inst = NO_BRIDGE,}, -}; - -static void amd8131_pcix_init(struct amd8131_dev_info *dev_info) -{ - u32 val32; - struct pci_dev *dev = dev_info->dev; - - /* First clear error detection flags */ - edac_pci_read_dword(dev, REG_MEM_LIM, &val32); - if (val32 & MEM_LIMIT_MASK) - edac_pci_write_dword(dev, REG_MEM_LIM, val32); - - /* Clear Discard Timer Timedout flag */ - edac_pci_read_dword(dev, REG_INT_CTLR, &val32); - if (val32 & INT_CTLR_DTS) - edac_pci_write_dword(dev, REG_INT_CTLR, val32); - - /* Clear CRC Error flag on link side A */ - edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32); - if (val32 & LNK_CTRL_CRCERR_A) - edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32); - - /* Clear CRC Error flag on link side B */ - edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32); - if (val32 & LNK_CTRL_CRCERR_B) - edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32); - - /* - * Then enable all error detections. - * - * Setup Discard Timer Sync Flood Enable, - * System Error Enable and Parity Error Enable. - */ - edac_pci_read_dword(dev, REG_INT_CTLR, &val32); - val32 |= INT_CTLR_PERR | INT_CTLR_SERR | INT_CTLR_DTSE; - edac_pci_write_dword(dev, REG_INT_CTLR, val32); - - /* Enable overall SERR Error detection */ - edac_pci_read_dword(dev, REG_STS_CMD, &val32); - val32 |= STS_CMD_SERREN; - edac_pci_write_dword(dev, REG_STS_CMD, val32); - - /* Setup CRC Flood Enable for link side A */ - edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32); - val32 |= LNK_CTRL_CRCFEN; - edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32); - - /* Setup CRC Flood Enable for link side B */ - edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32); - val32 |= LNK_CTRL_CRCFEN; - edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32); -} - -static void amd8131_pcix_exit(struct amd8131_dev_info *dev_info) -{ - u32 val32; - struct pci_dev *dev = dev_info->dev; - - /* Disable SERR, PERR and DTSE Error detection */ - edac_pci_read_dword(dev, REG_INT_CTLR, &val32); - val32 &= ~(INT_CTLR_PERR | INT_CTLR_SERR | INT_CTLR_DTSE); - edac_pci_write_dword(dev, REG_INT_CTLR, val32); - - /* Disable overall System Error detection */ - edac_pci_read_dword(dev, REG_STS_CMD, &val32); - val32 &= ~STS_CMD_SERREN; - edac_pci_write_dword(dev, REG_STS_CMD, val32); - - /* Disable CRC Sync Flood on link side A */ - edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32); - val32 &= ~LNK_CTRL_CRCFEN; - edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32); - - /* Disable CRC Sync Flood on link side B */ - edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32); - val32 &= ~LNK_CTRL_CRCFEN; - edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32); -} - -static void amd8131_pcix_check(struct edac_pci_ctl_info *edac_dev) -{ - struct amd8131_dev_info *dev_info = edac_dev->pvt_info; - struct pci_dev *dev = dev_info->dev; - u32 val32; - - /* Check PCI-X Bridge Memory Base-Limit Register for errors */ - edac_pci_read_dword(dev, REG_MEM_LIM, &val32); - if (val32 & MEM_LIMIT_MASK) { - printk(KERN_INFO "Error(s) in mem limit register " - "on %s bridge\n", dev_info->ctl_name); - printk(KERN_INFO "DPE: %d, RSE: %d, RMA: %d\n" - "RTA: %d, STA: %d, MDPE: %d\n", - val32 & MEM_LIMIT_DPE, - val32 & MEM_LIMIT_RSE, - val32 & MEM_LIMIT_RMA, - val32 & MEM_LIMIT_RTA, - val32 & MEM_LIMIT_STA, - val32 & MEM_LIMIT_MDPE); - - val32 |= MEM_LIMIT_MASK; - edac_pci_write_dword(dev, REG_MEM_LIM, val32); - - edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); - } - - /* Check if Discard Timer timed out */ - edac_pci_read_dword(dev, REG_INT_CTLR, &val32); - if (val32 & INT_CTLR_DTS) { - printk(KERN_INFO "Error(s) in interrupt and control register " - "on %s bridge\n", dev_info->ctl_name); - printk(KERN_INFO "DTS: %d\n", val32 & INT_CTLR_DTS); - - val32 |= INT_CTLR_DTS; - edac_pci_write_dword(dev, REG_INT_CTLR, val32); - - edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); - } - - /* Check if CRC error happens on link side A */ - edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32); - if (val32 & LNK_CTRL_CRCERR_A) { - printk(KERN_INFO "Error(s) in link conf and control register " - "on %s bridge\n", dev_info->ctl_name); - printk(KERN_INFO "CRCERR: %d\n", val32 & LNK_CTRL_CRCERR_A); - - val32 |= LNK_CTRL_CRCERR_A; - edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32); - - edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); - } - - /* Check if CRC error happens on link side B */ - edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32); - if (val32 & LNK_CTRL_CRCERR_B) { - printk(KERN_INFO "Error(s) in link conf and control register " - "on %s bridge\n", dev_info->ctl_name); - printk(KERN_INFO "CRCERR: %d\n", val32 & LNK_CTRL_CRCERR_B); - - val32 |= LNK_CTRL_CRCERR_B; - edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32); - - edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); - } -} - -static struct amd8131_info amd8131_chipset = { - .err_dev = PCI_DEVICE_ID_AMD_8131_APIC, - .devices = amd8131_devices, - .init = amd8131_pcix_init, - .exit = amd8131_pcix_exit, - .check = amd8131_pcix_check, -}; - -/* - * There are 4 PCIX Bridges on ATCA-6101 that share the same PCI Device ID, - * so amd8131_probe() would be called by kernel 4 times, with different - * address of pci_dev for each of them each time. - */ -static int amd8131_probe(struct pci_dev *dev, const struct pci_device_id *id) -{ - struct amd8131_dev_info *dev_info; - - for (dev_info = amd8131_chipset.devices; dev_info->inst != NO_BRIDGE; - dev_info++) - if (dev_info->devfn == dev->devfn) - break; - - if (dev_info->inst == NO_BRIDGE) /* should never happen */ - return -ENODEV; - - /* - * We can't call pci_get_device() as we are used to do because - * there are 4 of them but pci_dev_get() instead. - */ - dev_info->dev = pci_dev_get(dev); - - if (pci_enable_device(dev_info->dev)) { - pci_dev_put(dev_info->dev); - printk(KERN_ERR "failed to enable:" - "vendor %x, device %x, devfn %x, name %s\n", - PCI_VENDOR_ID_AMD, amd8131_chipset.err_dev, - dev_info->devfn, dev_info->ctl_name); - return -ENODEV; - } - - /* - * we do not allocate extra private structure for - * edac_pci_ctl_info, but make use of existing - * one instead. - */ - dev_info->edac_idx = edac_pci_alloc_index(); - dev_info->edac_dev = edac_pci_alloc_ctl_info(0, dev_info->ctl_name); - if (!dev_info->edac_dev) - return -ENOMEM; - - dev_info->edac_dev->pvt_info = dev_info; - dev_info->edac_dev->dev = &dev_info->dev->dev; - dev_info->edac_dev->mod_name = AMD8131_EDAC_MOD_STR; - dev_info->edac_dev->ctl_name = dev_info->ctl_name; - dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev); - - if (edac_op_state == EDAC_OPSTATE_POLL) - dev_info->edac_dev->edac_check = amd8131_chipset.check; - - if (amd8131_chipset.init) - amd8131_chipset.init(dev_info); - - if (edac_pci_add_device(dev_info->edac_dev, dev_info->edac_idx) > 0) { - printk(KERN_ERR "failed edac_pci_add_device() for %s\n", - dev_info->ctl_name); - edac_pci_free_ctl_info(dev_info->edac_dev); - return -ENODEV; - } - - printk(KERN_INFO "added one device on AMD8131 " - "vendor %x, device %x, devfn %x, name %s\n", - PCI_VENDOR_ID_AMD, amd8131_chipset.err_dev, - dev_info->devfn, dev_info->ctl_name); - - return 0; -} - -static void amd8131_remove(struct pci_dev *dev) -{ - struct amd8131_dev_info *dev_info; - - for (dev_info = amd8131_chipset.devices; dev_info->inst != NO_BRIDGE; - dev_info++) - if (dev_info->devfn == dev->devfn) - break; - - if (dev_info->inst == NO_BRIDGE) /* should never happen */ - return; - - if (dev_info->edac_dev) { - edac_pci_del_device(dev_info->edac_dev->dev); - edac_pci_free_ctl_info(dev_info->edac_dev); - } - - if (amd8131_chipset.exit) - amd8131_chipset.exit(dev_info); - - pci_dev_put(dev_info->dev); -} - -static const struct pci_device_id amd8131_edac_pci_tbl[] = { - { - PCI_VEND_DEV(AMD, 8131_BRIDGE), - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .class = 0, - .class_mask = 0, - .driver_data = 0, - }, - { - 0, - } /* table is NULL-terminated */ -}; -MODULE_DEVICE_TABLE(pci, amd8131_edac_pci_tbl); - -static struct pci_driver amd8131_edac_driver = { - .name = AMD8131_EDAC_MOD_STR, - .probe = amd8131_probe, - .remove = amd8131_remove, - .id_table = amd8131_edac_pci_tbl, -}; - -static int __init amd8131_edac_init(void) -{ - printk(KERN_INFO "AMD8131 EDAC driver " AMD8131_EDAC_REVISION "\n"); - printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc.\n"); - - /* Only POLL mode supported so far */ - edac_op_state = EDAC_OPSTATE_POLL; - - return pci_register_driver(&amd8131_edac_driver); -} - -static void __exit amd8131_edac_exit(void) -{ - pci_unregister_driver(&amd8131_edac_driver); -} - -module_init(amd8131_edac_init); -module_exit(amd8131_edac_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Cao Qingtao <qingtao.cao@windriver.com>"); -MODULE_DESCRIPTION("AMD8131 HyperTransport PCI-X Tunnel EDAC kernel module"); diff --git a/drivers/edac/amd8131_edac.h b/drivers/edac/amd8131_edac.h deleted file mode 100644 index 5f362abdaf12..000000000000 --- a/drivers/edac/amd8131_edac.h +++ /dev/null @@ -1,107 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * amd8131_edac.h, EDAC defs for AMD8131 hypertransport chip - * - * Copyright (c) 2008 Wind River Systems, Inc. - * - * Authors: Cao Qingtao <qingtao.cao@windriver.com> - * Benjamin Walsh <benjamin.walsh@windriver.com> - * Hu Yongqi <yongqi.hu@windriver.com> - */ - -#ifndef _AMD8131_EDAC_H_ -#define _AMD8131_EDAC_H_ - -#define DEVFN_PCIX_BRIDGE_NORTH_A 8 -#define DEVFN_PCIX_BRIDGE_NORTH_B 16 -#define DEVFN_PCIX_BRIDGE_SOUTH_A 24 -#define DEVFN_PCIX_BRIDGE_SOUTH_B 32 - -/************************************************************ - * PCI-X Bridge Status and Command Register, DevA:0x04 - ************************************************************/ -#define REG_STS_CMD 0x04 -enum sts_cmd_bits { - STS_CMD_SSE = BIT(30), - STS_CMD_SERREN = BIT(8) -}; - -/************************************************************ - * PCI-X Bridge Interrupt and Bridge Control Register, - ************************************************************/ -#define REG_INT_CTLR 0x3c -enum int_ctlr_bits { - INT_CTLR_DTSE = BIT(27), - INT_CTLR_DTS = BIT(26), - INT_CTLR_SERR = BIT(17), - INT_CTLR_PERR = BIT(16) -}; - -/************************************************************ - * PCI-X Bridge Memory Base-Limit Register, DevA:0x1C - ************************************************************/ -#define REG_MEM_LIM 0x1c -enum mem_limit_bits { - MEM_LIMIT_DPE = BIT(31), - MEM_LIMIT_RSE = BIT(30), - MEM_LIMIT_RMA = BIT(29), - MEM_LIMIT_RTA = BIT(28), - MEM_LIMIT_STA = BIT(27), - MEM_LIMIT_MDPE = BIT(24), - MEM_LIMIT_MASK = MEM_LIMIT_DPE|MEM_LIMIT_RSE|MEM_LIMIT_RMA| - MEM_LIMIT_RTA|MEM_LIMIT_STA|MEM_LIMIT_MDPE -}; - -/************************************************************ - * Link Configuration And Control Register, side A - ************************************************************/ -#define REG_LNK_CTRL_A 0xc4 - -/************************************************************ - * Link Configuration And Control Register, side B - ************************************************************/ -#define REG_LNK_CTRL_B 0xc8 - -enum lnk_ctrl_bits { - LNK_CTRL_CRCERR_A = BIT(9), - LNK_CTRL_CRCERR_B = BIT(8), - LNK_CTRL_CRCFEN = BIT(1) -}; - -enum pcix_bridge_inst { - NORTH_A = 0, - NORTH_B = 1, - SOUTH_A = 2, - SOUTH_B = 3, - NO_BRIDGE = 4 -}; - -struct amd8131_dev_info { - int devfn; - enum pcix_bridge_inst inst; - struct pci_dev *dev; - int edac_idx; /* pci device index */ - char *ctl_name; - struct edac_pci_ctl_info *edac_dev; -}; - -/* - * AMD8131 chipset has two pairs of PCIX Bridge and related IOAPIC - * Controller, and ATCA-6101 has two AMD8131 chipsets, so there are - * four PCIX Bridges on ATCA-6101 altogether. - * - * These PCIX Bridges share the same PCI Device ID and are all of - * Function Zero, they could be discrimated by their pci_dev->devfn. - * They share the same set of init/check/exit methods, and their - * private structures are collected in the devices[] array. - */ -struct amd8131_info { - u16 err_dev; /* PCI Device ID for AMD8131 APIC*/ - struct amd8131_dev_info *devices; - void (*init)(struct amd8131_dev_info *dev_info); - void (*exit)(struct amd8131_dev_info *dev_info); - void (*check)(struct edac_pci_ctl_info *edac_dev); -}; - -#endif /* _AMD8131_EDAC_H_ */ - diff --git a/drivers/macintosh/via-pmu-led.c b/drivers/macintosh/via-pmu-led.c index a4fb16d7db3c..fc1af74b6596 100644 --- a/drivers/macintosh/via-pmu-led.c +++ b/drivers/macintosh/via-pmu-led.c @@ -92,18 +92,15 @@ static int __init via_pmu_led_init(void) if (dt == NULL) return -ENODEV; model = of_get_property(dt, "model", NULL); - if (model == NULL) { - of_node_put(dt); - return -ENODEV; - } + if (!model) + goto put_node; + if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 && strncmp(model, "iBook", strlen("iBook")) != 0 && strcmp(model, "PowerMac7,2") != 0 && - strcmp(model, "PowerMac7,3") != 0) { - of_node_put(dt); - /* ignore */ - return -ENODEV; - } + strcmp(model, "PowerMac7,3") != 0) + goto put_node; + of_node_put(dt); spin_lock_init(&pmu_blink_lock); @@ -112,6 +109,10 @@ static int __init via_pmu_led_init(void) pmu_blink_req.done = pmu_req_done; return led_classdev_register(NULL, &pmu_led); + +put_node: + of_node_put(dt); + return -ENODEV; } late_initcall(via_pmu_led_init); diff --git a/drivers/ps3/ps3-lpm.c b/drivers/ps3/ps3-lpm.c index 200ad8751860..188ae2572674 100644 --- a/drivers/ps3/ps3-lpm.c +++ b/drivers/ps3/ps3-lpm.c @@ -91,7 +91,7 @@ struct ps3_lpm_shadow_regs { * struct ps3_lpm_priv - Private lpm device data. * * @open: An atomic variable indicating the lpm driver has been opened. - * @rights: The lpm rigths granted by the system policy module. A logical + * @rights: The lpm rights granted by the system policy module. A logical * OR of enum ps3_lpm_rights. * @node_id: The node id of a BE processor whose performance monitor this * lpar has the right to use. diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c index ad8ef59dea34..ab798b52910e 100644 --- a/drivers/ps3/ps3-sys-manager.c +++ b/drivers/ps3/ps3-sys-manager.c @@ -362,7 +362,7 @@ static int ps3_sys_manager_send_request_shutdown( * ps3_sys_manager_send_response - Send a 'response' to the system manager. * @status: zero = success, others fail. * - * The guest sends this message to the system manager to acnowledge success or + * The guest sends this message to the system manager to acknowledge success or * failure of a command sent by the system manager. */ diff --git a/drivers/ps3/ps3-vuart.c b/drivers/ps3/ps3-vuart.c index 6328abd51ffa..5cb92535a4a1 100644 --- a/drivers/ps3/ps3-vuart.c +++ b/drivers/ps3/ps3-vuart.c @@ -467,8 +467,8 @@ struct list_buffer { * * If the port is idle on entry as much of the incoming data is written to * the port as the port will accept. Otherwise a list buffer is created - * and any remaning incoming data is copied to that buffer. The buffer is - * then enqueued for transmision via the transmit interrupt. + * and any remaining incoming data is copied to that buffer. The buffer is + * then enqueued for transmission via the transmit interrupt. */ int ps3_vuart_write(struct ps3_system_bus_device *dev, const void *buf, diff --git a/drivers/ps3/sys-manager-core.c b/drivers/ps3/sys-manager-core.c index e061b7d0632b..f50032ad9702 100644 --- a/drivers/ps3/sys-manager-core.c +++ b/drivers/ps3/sys-manager-core.c @@ -12,7 +12,7 @@ #include <asm/ps3.h> /** - * Staticly linked routines that allow late binding of a loaded sys-manager + * Statically linked routines that allow late binding of a loaded sys-manager * module. */ |