aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/amdgpu/amdgpu.h (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2025-10-14sched/fair: Fix pelt lost idle time detectionVincent Guittot1-13/+13
The check for some lost idle pelt time should be always done when pick_next_task_fair() fails to pick a task and not only when we call it from the fair fast-path. The case happens when the last running task on rq is a RT or DL task. When the latter goes to sleep and the /Sum of util_sum of the rq is at the max value, we don't account the lost of idle time whereas we should. Fixes: 67692435c411 ("sched: Rework pick_next_task() slow-path") Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2025-10-14sched/deadline: Stop dl_server before CPU goes offlinePeter Zijlstra (Intel)2-0/+5
IBM CI tool reported kernel warning[1] when running a CPU removal operation through drmgr[2]. i.e "drmgr -c cpu -r -q 1" WARNING: CPU: 0 PID: 0 at kernel/sched/cpudeadline.c:219 cpudl_set+0x58/0x170 NIP [c0000000002b6ed8] cpudl_set+0x58/0x170 LR [c0000000002b7cb8] dl_server_timer+0x168/0x2a0 Call Trace: [c000000002c2f8c0] init_stack+0x78c0/0x8000 (unreliable) [c0000000002b7cb8] dl_server_timer+0x168/0x2a0 [c00000000034df84] __hrtimer_run_queues+0x1a4/0x390 [c00000000034f624] hrtimer_interrupt+0x124/0x300 [c00000000002a230] timer_interrupt+0x140/0x320 Git bisects to: commit 4ae8d9aa9f9d ("sched/deadline: Fix dl_server getting stuck") This happens since: - dl_server hrtimer gets enqueued close to cpu offline, when kthread_park enqueues a fair task. - CPU goes offline and drmgr removes it from cpu_present_mask. - hrtimer fires and warning is hit. Fix it by stopping the dl_server before CPU is marked dead. [1]: https://lore.kernel.org/all/8218e149-7718-4432-9312-f97297c352b9@linux.ibm.com/ [2]: https://github.com/ibm-power-utilities/powerpc-utils/tree/next/src/drmgr [sshegde: wrote the changelog and tested it] Fixes: 4ae8d9aa9f9d ("sched/deadline: Fix dl_server getting stuck") Closes: https://lore.kernel.org/all/8218e149-7718-4432-9312-f97297c352b9@linux.ibm.com Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com>
2025-10-14HID: hid-debug: Fix spelling mistake "Rechargable" -> "Rechargeable"Colin Ian King1-1/+1
There is a spelling mistake in HID description. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-10-14net: airoha: Take into account out-of-order tx completions in airoha_dev_xmit()Lorenzo Bianconi1-1/+15
Completion napi can free out-of-order tx descriptors if hw QoS is enabled and packets with different priority are queued to same DMA ring. Take into account possible out-of-order reports checking if the tx queue is full using circular buffer head/tail pointer instead of the number of queued packets. Fixes: 23020f0493270 ("net: airoha: Introduce ethernet support for EN7581 SoC") Suggested-by: Simon Horman <horms@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251012-airoha-tx-busy-queue-v2-1-a600b08bab2d@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-10-14tcp: fix tcp_tso_should_defer() vs large RTTEric Dumazet1-4/+15
Neal reported that using neper tcp_stream with TCP_TX_DELAY set to 50ms would often lead to flows stuck in a small cwnd mode, regardless of the congestion control. While tcp_stream sets TCP_TX_DELAY too late after the connect(), it highlighted two kernel bugs. The following heuristic in tcp_tso_should_defer() seems wrong for large RTT: delta = tp->tcp_clock_cache - head->tstamp; /* If next ACK is likely to come too late (half srtt), do not defer */ if ((s64)(delta - (u64)NSEC_PER_USEC * (tp->srtt_us >> 4)) < 0) goto send_now; If next ACK is expected to come in more than 1 ms, we should not defer because we prefer a smooth ACK clocking. While blamed commit was a step in the good direction, it was not generic enough. Another patch fixing TCP_TX_DELAY for established flows will be proposed when net-next reopens. Fixes: 50c8339e9299 ("tcp: tso: restore IW10 after TSO autosizing") Reported-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Link: https://patch.msgid.link/20251011115742.1245771-1-edumazet@google.com [pabeni@redhat.com: fixed whitespace issue] Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-10-14HID: Kconfig: Fix build error from CONFIG_HID_HAPTICJonathan Denose1-1/+1
Temporarily change CONFIG_HID_HAPTIC to be bool instead of tristate, until we implement a permanent solution. Recently the CONFIG_HID_HAPTIC Kconfig option was reported as causing the following build errors: MODPOST Module.symvers ERROR: modpost: "hid_haptic_init" [drivers/hid/hid-multitouch.ko] undefined! ERROR: modpost: "hid_haptic_pressure_increase" [drivers/hid/hid-multitouch.ko] undefined! ERROR: modpost: "hid_haptic_check_pressure_unit" [drivers/hid/hid-multitouch.ko] undefined! ERROR: modpost: "hid_haptic_input_configured" [drivers/hid/hid-multitouch.ko] undefined! ERROR: modpost: "hid_haptic_input_mapping" [drivers/hid/hid-multitouch.ko] undefined! ERROR: modpost: "hid_haptic_feature_mapping" [drivers/hid/hid-multitouch.ko] undefined! ERROR: modpost: "hid_haptic_pressure_reset" [drivers/hid/hid-multitouch.ko] undefined! make[3]: *** [/home/thl/var/linux.dev/scripts/Makefile.modpost:147: Module.symvers] Error 1 when the kernel is compiled with the following configuration: CONFIG_HID=y CONFIG_HID_MULTITOUCH=m CONFIG_HID_HAPTIC=m To resolve this, temporarily change the CONFIG_HID_HAPTIC option to be bool, until we arrive at a permanent solution to enable CONFIG_HID_HAPTIC to be tristate. For a more detailed discussion, see [1]. [1]: https://lore.kernel.org/linux-input/auypydfkhx2eg7vp764way4batdilzc35inqda3exwzs3tk3ff@oagat6g46zto/ Signed-off-by: Jonathan Denose <jdenose@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-10-14r8152: add error handling in rtl8152_driver_initYi Cong1-1/+6
rtl8152_driver_init() is missing the error handling. When rtl8152_driver registration fails, rtl8152_cfgselector_driver should be deregistered. Fixes: ec51fbd1b8a2 ("r8152: add USB device driver for config selection") Cc: stable@vger.kernel.org Signed-off-by: Yi Cong <yicong@kylinos.cn> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251011082415.580740-1-yicongsrfy@163.com [pabeni@redhat.com: clarified the commit message] Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-10-14HID: nintendo: Rate limit IMU compensation messageVicki Pfau1-2/+2
Some controllers are very bad at updating the IMU, leading to these messages spamming the syslog. Rate-limiting them helps with this a bit. Signed-off-by: Vicki Pfau <vi@endrift.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-10-14HID: nintendo: Wait longer for initial probeVicki Pfau1-1/+1
Some third-party controllers, such as the PB Tails CHOC, won't always respond quickly on startup. Since this packet is needed for probe, and only once during probe, let's just wait an extra second, which makes connecting consistent. Signed-off-by: Vicki Pfau <vi@endrift.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-10-14HID: core: Add printk_ratelimited variants to hid_warn() etcVicki Pfau1-0/+11
hid_warn_ratelimited() is needed. Add the others as part of the block. Signed-off-by: Vicki Pfau <vi@endrift.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-10-14usbnet: Fix using smp_processor_id() in preemptible code warningsZqiang1-0/+2
Syzbot reported the following warning: BUG: using smp_processor_id() in preemptible [00000000] code: dhcpcd/2879 caller is usbnet_skb_return+0x74/0x490 drivers/net/usb/usbnet.c:331 CPU: 1 UID: 0 PID: 2879 Comm: dhcpcd Not tainted 6.15.0-rc4-syzkaller-00098-g615dca38c2ea #0 PREEMPT(voluntary) Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120 check_preemption_disabled+0xd0/0xe0 lib/smp_processor_id.c:49 usbnet_skb_return+0x74/0x490 drivers/net/usb/usbnet.c:331 usbnet_resume_rx+0x4b/0x170 drivers/net/usb/usbnet.c:708 usbnet_change_mtu+0x1be/0x220 drivers/net/usb/usbnet.c:417 __dev_set_mtu net/core/dev.c:9443 [inline] netif_set_mtu_ext+0x369/0x5c0 net/core/dev.c:9496 netif_set_mtu+0xb0/0x160 net/core/dev.c:9520 dev_set_mtu+0xae/0x170 net/core/dev_api.c:247 dev_ifsioc+0xa31/0x18d0 net/core/dev_ioctl.c:572 dev_ioctl+0x223/0x10e0 net/core/dev_ioctl.c:821 sock_do_ioctl+0x19d/0x280 net/socket.c:1204 sock_ioctl+0x42f/0x6a0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f For historical and portability reasons, the netif_rx() is usually run in the softirq or interrupt context, this commit therefore add local_bh_disable/enable() protection in the usbnet_resume_rx(). Fixes: 43daa96b166c ("usbnet: Stop RX Q on MTU change") Link: https://syzkaller.appspot.com/bug?id=81f55dfa587ee544baaaa5a359a060512228c1e1 Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Zqiang <qiang.zhang@linux.dev> Link: https://patch.msgid.link/20251011070518.7095-1-qiang.zhang@linux.dev Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-10-14HID: quirks: Add ALWAYS_POLL quirk for VRS R295 steering wheelOleg Makarenko2-0/+2
This patch adds ALWAYS_POLL quirk for the VRS R295 steering wheel joystick. This device reboots itself every 8-10 seconds if it is not polled. Signed-off-by: Oleg Makarenko <oleg@makarenk.ooo> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-10-14HID: quirks: avoid Cooler Master MM712 dongle wakeup bugTristan Lobb2-0/+4
The Cooler Master Mice Dongle includes a vendor defined HID interface alongside its mouse interface. Not polling it will cause the mouse to stop responding to polls on any interface once woken up again after going into power saving mode. Add the HID_QUIRK_ALWAYS_POLL quirk alongside the Cooler Master VID and the Dongle's PID. Signed-off-by: Tristan Lobb <tristan.lobb@it-lobb.de> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-10-14Octeontx2-af: Fix missing error code in cgx_probe()Harshit Mogalapalli1-0/+1
When CGX fails mapping to NIX, set the error code to -ENODEV, currently err is zero and that is treated as success path. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/aLAdlCg2_Yv7Y-3h@stanley.mountain/ Fixes: d280233fc866 ("Octeontx2-af: Fix NIX X2P calibration failures") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251010204239.94237-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-10-14HID: cp2112: Add parameter validation to data lengthDeepak Sharma1-3/+24
Syzkaller reported a stack OOB access in cp2112_write_req caused by lack of parameter validation for the user input in I2C SMBUS ioctl in cp2112 driver Add the parameter validation for the data->block[0] to be bounded by I2C_SMBUS_BLOCK_MAX + the additional compatibility padding [jkosina@suse.com: fix whitespace damage] Reported-by: syzbot+7617e19c8a59edfbd879@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7617e19c8a59edfbd879 Tested-by: syzbot+7617e19c8a59edfbd879@syzkaller.appspotmail.com Signed-off-by: Deepak Sharma <deepak.sharma.472935@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-10-14HID: intel-thc-hid: intel-quickspi: Add ARL PCI Device Id'sAbhishek Tamboli2-0/+8
Add the missing PCI ID for the quickspi device used on the Lenovo Yoga Pro 9i 16IAH10. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=220567 Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com> Reviewed-by: Even Xu <even.xu@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-10-14HID: intel-thc-hid: Intel-quickspi: switch first interrupt from level to ↵Even Xu1-2/+1
edge detection The original implementation used level detection for the first interrupt after device reset to avoid potential interrupt line noise and missed interrupts during the initialization phase. However, this approach introduced unintended side effects when tested with certain touch panels, including: - Delayed hardware interrupt response - Multiple spurious interrupt triggers Switching back to edge detection for the first interrupt resolves these issues while maintaining reliable interrupt handling. Extensive testing across multiple platforms with touch panels from various vendors confirms this change introduces no regressions. [jkosina@suse.com: properly capitalize shortlog] Fixes: 9d8d51735a3a ("HID: intel-thc-hid: intel-quickspi: Add HIDSPI protocol implementation") Tested-by: Rui Zhang <rui1.zhang@intel.com> Signed-off-by: Even Xu <even.xu@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-10-14HID: intel-thc-hid: intel-quicki2c: Fix wrong type castingXinpeng Sun1-1/+1
The type definition of qcdev->i2c_max_frame_size is already u32, so remove the unnecessary type casting le16_to_cpu. Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202509280841.pxmgBzKW-lkp@intel.com/ Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-10-14perf/core: Fix MMAP2 event device with backing filesAdrian Hunter1-2/+2
Some file systems like FUSE-based ones or overlayfs may record the backing file in struct vm_area_struct vm_file, instead of the user file that the user mmapped. That causes perf to misreport the device major/minor numbers of the file system of the file, and the generation of the file, and potentially other inode details. There is an existing helper file_user_inode() for that situation. Use file_user_inode() instead of file_inode() to get the inode for MMAP2 events. Example: Setup: # cd /root # mkdir test ; cd test ; mkdir lower upper work merged # cp `which cat` lower # mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged # perf record -e cycles:u -- /root/test/merged/cat /proc/self/maps ... 55b2c91d0000-55b2c926b000 r-xp 00018000 00:1a 3419 /root/test/merged/cat ... [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.004 MB perf.data (5 samples) ] # # stat /root/test/merged/cat File: /root/test/merged/cat Size: 1127792 Blocks: 2208 IO Block: 4096 regular file Device: 0,26 Inode: 3419 Links: 1 Access: (0755/-rwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2025-09-08 12:23:59.453309624 +0000 Modify: 2025-09-08 12:23:59.454309624 +0000 Change: 2025-09-08 12:23:59.454309624 +0000 Birth: 2025-09-08 12:23:59.453309624 +0000 Before: Device reported 00:02 differs from stat output and /proc/self/maps # perf script --show-mmap-events | grep /root/test/merged/cat cat 377 [-01] 243.078558: PERF_RECORD_MMAP2 377/377: [0x55b2c91d0000(0x9b000) @ 0x18000 00:02 3419 2068525940]: r-xp /root/test/merged/cat After: Device reported 00:1a is the same as stat output and /proc/self/maps # perf script --show-mmap-events | grep /root/test/merged/cat cat 362 [-01] 127.755167: PERF_RECORD_MMAP2 362/362: [0x55ba6e781000(0x9b000) @ 0x18000 00:1a 3419 0]: r-xp /root/test/merged/cat With respect to stable kernels, overlayfs mmap function ovl_mmap() was added in v4.19 but file_user_inode() was not added until v6.8 and never back-ported to stable kernels. FMODE_BACKING that it depends on was added in v6.5. This issue has gone largely unnoticed, so back-porting before v6.8 is probably not worth it, so put 6.8 as the stable kernel prerequisite version, although in practice the next long term kernel is 6.12. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Amir Goldstein <amir73il@gmail.com> Cc: stable@vger.kernel.org # 6.8
2025-10-14perf/core: Fix MMAP event path names with backing filesAdrian Hunter1-1/+1
Some file systems like FUSE-based ones or overlayfs may record the backing file in struct vm_area_struct vm_file, instead of the user file that the user mmapped. Since commit def3ae83da02f ("fs: store real path instead of fake path in backing file f_path"), file_path() no longer returns the user file path when applied to a backing file. There is an existing helper file_user_path() for that situation. Use file_user_path() instead of file_path() to get the path for MMAP and MMAP2 events. Example: Setup: # cd /root # mkdir test ; cd test ; mkdir lower upper work merged # cp `which cat` lower # mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged # perf record -e intel_pt//u -- /root/test/merged/cat /proc/self/maps ... 55b0ba399000-55b0ba434000 r-xp 00018000 00:1a 3419 /root/test/merged/cat ... [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.060 MB perf.data ] # Before: File name is wrong (/cat), so decoding fails: # perf script --no-itrace --show-mmap-events cat 367 [016] 100.491492: PERF_RECORD_MMAP2 367/367: [0x55b0ba399000(0x9b000) @ 0x18000 00:02 3419 489959280]: r-xp /cat ... # perf script --itrace=e | wc -l Warning: 19 instruction trace errors 19 # After: File name is correct (/root/test/merged/cat), so decoding is ok: # perf script --no-itrace --show-mmap-events cat 364 [016] 72.153006: PERF_RECORD_MMAP2 364/364: [0x55ce4003d000(0x9b000) @ 0x18000 00:02 3419 3132534314]: r-xp /root/test/merged/cat # perf script --itrace=e # perf script --itrace=e | wc -l 0 # Fixes: def3ae83da02f ("fs: store real path instead of fake path in backing file f_path") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Amir Goldstein <amir73il@gmail.com> Cc: stable@vger.kernel.org
2025-10-14perf/core: Fix address filter match with backing filesAdrian Hunter1-1/+1
It was reported that Intel PT address filters do not work in Docker containers. That relates to the use of overlayfs. overlayfs records the backing file in struct vm_area_struct vm_file, instead of the user file that the user mmapped. In order for an address filter to match, it must compare to the user file inode. There is an existing helper file_user_inode() for that situation. Use file_user_inode() instead of file_inode() to get the inode for address filter matching. Example: Setup: # cd /root # mkdir test ; cd test ; mkdir lower upper work merged # cp `which cat` lower # mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged # perf record --buildid-mmap -e intel_pt//u --filter 'filter * @ /root/test/merged/cat' -- /root/test/merged/cat /proc/self/maps ... 55d61d246000-55d61d2e1000 r-xp 00018000 00:1a 3418 /root/test/merged/cat ... [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.015 MB perf.data ] # perf buildid-cache --add /root/test/merged/cat Before: Address filter does not match so there are no control flow packets # perf script --itrace=e # perf script --itrace=b | wc -l 0 # perf script -D | grep 'TIP.PGE' | wc -l 0 # After: Address filter does match so there are control flow packets # perf script --itrace=e # perf script --itrace=b | wc -l 235 # perf script -D | grep 'TIP.PGE' | wc -l 57 # With respect to stable kernels, overlayfs mmap function ovl_mmap() was added in v4.19 but file_user_inode() was not added until v6.8 and never back-ported to stable kernels. FMODE_BACKING that it depends on was added in v6.5. This issue has gone largely unnoticed, so back-porting before v6.8 is probably not worth it, so put 6.8 as the stable kernel prerequisite version, although in practice the next long term kernel is 6.12. Closes: https://lore.kernel.org/linux-perf-users/aBCwoq7w8ohBRQCh@fremen.lan Reported-by: Edd Barrett <edd@theunixzoo.co.uk> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Amir Goldstein <amir73il@gmail.com> Cc: stable@vger.kernel.org # 6.8
2025-10-14uprobe: Move arch_uprobe_optimize right after handlers executionJiri Olsa1-3/+3
It's less confusing to optimize uprobe right after handlers execution and before we do the check for changed ip register to avoid situations where changed ip register would skip uprobe optimization. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2025-10-14drm/rockchip: vop2: use correct destination rectangle height checkAlok Tiwari1-1/+1
The vop2_plane_atomic_check() function incorrectly checks drm_rect_width(dest) twice instead of verifying both width and height. Fix the second condition to use drm_rect_height(dest) so that invalid destination rectangles with height < 4 are correctly rejected. Fixes: 604be85547ce ("drm/rockchip: Add VOP2 driver") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20251012142005.660727-1-alok.a.tiwari@oracle.com
2025-10-14amd-xgbe: Avoid spurious link down messages during interface toggleRaju Rangoju2-1/+1
During interface toggle operations (ifdown/ifup), the driver currently resets the local helper variable 'phy_link' to -1. This causes the link state machine to incorrectly interpret the state as a link change event, resulting in spurious "Link is down" messages being logged when the interface is brought back up. Preserve the phy_link state across interface toggles to avoid treating the -1 sentinel value as a legitimate link state transition. Fixes: 88131a812b16 ("amd-xgbe: Perform phy connect/disconnect at dev open/stop") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Link: https://patch.msgid.link/20251010065142.1189310-1-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-10-14xhci: dbc: enable back DbC in resume if it was enabled before suspendMathias Nyman1-1/+8
DbC is currently only enabled back if it's in configured state during suspend. If system is suspended after DbC is enabled, but before the device is properly enumerated by the host, then DbC would not be enabled back in resume. Always enable DbC back in resume if it's suspended in enabled, connected, or configured state Cc: stable <stable@kernel.org> Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Tested-by: Łukasz Bartosik <ukaszb@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-14xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall eventMathias Nyman1-2/+4
DbC may add 1024 bogus bytes to the beginneing of the receiving endpoint if DbC hw triggers a STALL event before any Transfer Blocks (TRBs) for incoming data are queued, but driver handles the event after it queued the TRBs. This is possible as xHCI DbC hardware may trigger spurious STALL transfer events even if endpoint is empty. The STALL event contains a pointer to the stalled TRB, and "remaining" untransferred data length. As there are no TRBs queued yet the STALL event will just point to first TRB position of the empty ring, with '0' bytes remaining untransferred. DbC driver is polling for events, and may not handle the STALL event before /dev/ttyDBC0 is opened and incoming data TRBs are queued. The DbC event handler will now assume the first queued TRB (length 1024) has stalled with '0' bytes remaining untransferred, and copies the data This race situation can be practically mitigated by making sure the event handler handles all pending transfer events when DbC reaches configured state, and only then create dev/ttyDbC0, and start queueing transfers. The event handler can this way detect the STALL events on empty rings and discard them before any transfers are queued. This does in practice solve the issue, but still leaves a small possible gap for the race to trigger. We still need a way to distinguish spurious STALLs on empty rings with '0' bytes remaing, from actual STALL events with all bytes transmitted. Cc: stable <stable@kernel.org> Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Tested-by: Łukasz Bartosik <ukaszb@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-14usb: xhci-pci: Fix USB2-only root hub registrationMichal Pecio1-1/+2
A recent change to hide USB3 root hubs of USB2-only controllers broke registration of USB2 root hubs - allow_single_roothub is set too late, and by this time xhci_run() has already deferred root hub registration until after the shared HCD is added, which will never happen. This makes such controllers unusable, but testers didn't notice since they were only bothered by warnings about empty USB3 root hubs. The bug causes problems to other people who actually use such HCs and I was able to confirm it on an ordinary HC by patching to ignore USB3 ports. Setting allow_single_roothub during early setup fixes things. Reported-by: Arisa Snowbell <arisa.snowbell@gmail.com> Closes: https://lore.kernel.org/linux-usb/CABpa4MA9unucCoKtSdzJyOLjHNVy+Cwgz5AnAxPkKw6vuox1Nw@mail.gmail.com/ Reported-by: Michal Kubecek <mkubecek@suse.cz> Closes: https://lore.kernel.org/linux-usb/lnb5bum7dnzkn3fc7gq6hwigslebo7o4ccflcvsc3lvdgnu7el@fvqpobbdoapl/ Fixes: 719de070f764 ("usb: xhci-pci: add support for hosts with zero USB3 ports") Tested-by: Arisa Snowbell <arisa.snowbell@gmail.com> Tested-by: Michal Kubecek <mkubecek@suse.cz> Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-14drm/draw: fix color truncation in drm_draw_fill24Francesco Valla2-2/+2
The color parameter passed to drm_draw_fill24() was truncated to 16 bits, leading to an incorrect color drawn to the target iosys_map. Fix this behavior, widening the parameter to 32 bits. Fixes: 31fa2c1ca0b2 ("drm/panic: Move drawing functions to drm_draw") Signed-off-by: Francesco Valla <francesco@valla.it> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://lore.kernel.org/r/20251003-drm_draw_fill24_fix-v1-1-8fb7c1c2a893@valla.it Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
2025-10-14arm64: Revamp HCR_EL2.E2H RES1 detectionMarc Zyngier1-6/+32
We currently have two ways to identify CPUs that only implement FEAT_VHE and not FEAT_E2H0: - either they advertise it via ID_AA64MMFR4_EL1.E2H0, - or the HCR_EL2.E2H bit is RAO/WI However, there is a third category of "cpus" that fall between these two cases: on CPUs that do not implement FEAT_FGT, it is IMPDEF whether an access to ID_AA64MMFR4_EL1 can trap to EL2 when the register value is zero. A consequence of this is that on systems such as Neoverse V2, a NV guest cannot reliably detect that it is in a VHE-only configuration (E2H is writable, and ID_AA64MMFR0_EL1 is 0), despite the hypervisor's best effort to repaint the id register. Replace the RAO/WI test by a sequence that makes use of the VHE register remnapping between EL1 and EL2 to detect this situation, and work out whether we get the VHE behaviour even after having set HCR_EL2.E2H to 0. This solves the NV problem, and provides a more reliable acid test for CPUs that do not completely follow the letter of the architecture while providing a RES1 behaviour for HCR_EL2.E2H. Suggested-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Tested-by: Jan Kotas <jank@cadence.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/15A85F2B-1A0C-4FA7-9FE4-EEC2203CC09E@global.cadence.com
2025-10-13Use CONFIG_EXT4_FS instead of CONFIG_EXT3_FS in all of the defconfigsTheodore Ts'o109-182/+182
Commit d6ace46c82fd ("ext4: remove obsolete EXT3 config options") removed the obsolete EXT3_CONFIG options, since it had been over a decade since fs/ext3 had been removed. Unfortunately, there were a number of defconfigs that still used CONFIG_EXT3_FS which the cleanup commit didn't fix up. This led to a large number of defconfig test builds to fail. Oops. Fixes: d6ace46c82fd ("ext4: remove obsolete EXT3 config options") Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2025-10-13net: phy: realtek: Avoid PHYCR2 access if PHYCR2 not presentMarek Vasut1-12/+11
The driver is currently checking for PHYCR2 register presence in rtl8211f_config_init(), but it does so after accessing PHYCR2 to disable EEE. This was introduced in commit bfc17c165835 ("net: phy: realtek: disable PHY-mode EEE"). Move the PHYCR2 presence test before the EEE disablement and simplify the code. Fixes: bfc17c165835 ("net: phy: realtek: disable PHY-mode EEE") Signed-off-by: Marek Vasut <marek.vasut@mailbox.org> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20251011110309.12664-1-marek.vasut@mailbox.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-13ixgbe: fix too early devlink_free() in ixgbe_remove()Koichiro Den1-1/+2
Since ixgbe_adapter is embedded in devlink, calling devlink_free() prematurely in the ixgbe_remove() path can lead to UAF. Move devlink_free() to the end. KASAN report: BUG: KASAN: use-after-free in ixgbe_reset_interrupt_capability+0x140/0x180 [ixgbe] Read of size 8 at addr ffff0000adf813e0 by task bash/2095 CPU: 1 UID: 0 PID: 2095 Comm: bash Tainted: G S 6.17.0-rc2-tnguy.net-queue+ #1 PREEMPT(full) [...] Call trace: show_stack+0x30/0x90 (C) dump_stack_lvl+0x9c/0xd0 print_address_description.constprop.0+0x90/0x310 print_report+0x104/0x1f0 kasan_report+0x88/0x180 __asan_report_load8_noabort+0x20/0x30 ixgbe_reset_interrupt_capability+0x140/0x180 [ixgbe] ixgbe_clear_interrupt_scheme+0xf8/0x130 [ixgbe] ixgbe_remove+0x2d0/0x8c0 [ixgbe] pci_device_remove+0xa0/0x220 device_remove+0xb8/0x170 device_release_driver_internal+0x318/0x490 device_driver_detach+0x40/0x68 unbind_store+0xec/0x118 drv_attr_store+0x64/0xb8 sysfs_kf_write+0xcc/0x138 kernfs_fop_write_iter+0x294/0x440 new_sync_write+0x1fc/0x588 vfs_write+0x480/0x6a0 ksys_write+0xf0/0x1e0 __arm64_sys_write+0x70/0xc0 invoke_syscall.constprop.0+0xcc/0x280 el0_svc_common.constprop.0+0xa8/0x248 do_el0_svc+0x44/0x68 el0_svc+0x54/0x160 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1b0/0x1b8 Fixes: a0285236ab93 ("ixgbe: add initial devlink support") Signed-off-by: Koichiro Den <den@valinux.co.jp> Tested-by: Rinitha S <sx.rinitha@intel.com> Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-6-ef32a425b92a@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-13ixgbe: handle IXGBE_VF_FEATURES_NEGOTIATE mbox cmdJedrzej Jagielski2-0/+47
Send to VF information about features supported by the PF driver. Increase API version to 1.7. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-5-ef32a425b92a@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-13ixgbevf: fix mailbox API compatibility by negotiating supported featuresJedrzej Jagielski6-3/+96
There was backward compatibility in the terms of mailbox API. Various drivers from various OSes supporting 10G adapters from Intel portfolio could easily negotiate mailbox API. This convention has been broken since introducing API 1.4. Commit 0062e7cc955e ("ixgbevf: add VF IPsec offload code") added support for IPSec which is specific only for the kernel ixgbe driver. None of the rest of the Intel 10G PF/VF drivers supports it. And actually lack of support was not included in the IPSec implementation - there were no such code paths. No possibility to negotiate support for the feature was introduced along with introduction of the feature itself. Commit 339f28964147 ("ixgbevf: Add support for new mailbox communication between PF and VF") increasing API version to 1.5 did the same - it introduced code supported specifically by the PF ESX driver. It altered API version for the VF driver in the same time not touching the version defined for the PF ixgbe driver. It led to additional discrepancies, as the code provided within API 1.6 cannot be supported for Linux ixgbe driver as it causes crashes. The issue was noticed some time ago and mitigated by Jake within the commit d0725312adf5 ("ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5"). As a result we have regression for IPsec support and after increasing API to version 1.6 ixgbevf driver stopped to support ESX MBX. To fix this mess add new mailbox op asking PF driver about supported features. Basing on a response determine whether to set support for IPSec and ESX-specific enhanced mailbox. New mailbox op, for compatibility purposes, must be added within new API revision, as API version of OOT PF & VF drivers is already increased to 1.6 and doesn't incorporate features negotiate op. Features negotiation mechanism gives possibility to be extended with new features when needed in the future. Reported-by: Jacob Keller <jacob.e.keller@intel.com> Closes: https://lore.kernel.org/intel-wired-lan/20241101-jk-ixgbevf-mailbox-v1-5-fixes-v1-0-f556dc9a66ed@intel.com/ Fixes: 0062e7cc955e ("ixgbevf: add VF IPsec offload code") Fixes: 339f28964147 ("ixgbevf: Add support for new mailbox communication between PF and VF") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-4-ef32a425b92a@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-13ixgbe: handle IXGBE_VF_GET_PF_LINK_STATE mailbox operationJedrzej Jagielski2-0/+47
Update supported API version and provide handler for IXGBE_VF_GET_PF_LINK_STATE cmd. Simply put stored values of link speed and link_up from adapter context. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Link: https://lore.kernel.org/stable/20250828095227.1857066-3-jedrzej.jagielski%40intel.com Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-3-ef32a425b92a@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-13ixgbevf: fix getting link speed data for E610 devicesJedrzej Jagielski4-32/+116
E610 adapters no longer use the VFLINKS register to read PF's link speed and linkup state. As a result VF driver cannot get actual link state and it incorrectly reports 10G which is the default option. It leads to a situation where even 1G adapters print 10G as actual link speed. The same happens when PF driver set speed different than 10G. Add new mailbox operation to let the VF driver request a PF driver to provide actual link data. Update the mailbox api to v1.6. Incorporate both ways of getting link status within the legacy ixgbe_check_mac_link_vf() function. Fixes: 4c44b450c69b ("ixgbevf: Add support for Intel(R) E610 device") Co-developed-by: Andrzej Wilczynski <andrzejx.wilczynski@intel.com> Signed-off-by: Andrzej Wilczynski <andrzejx.wilczynski@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-2-ef32a425b92a@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-13idpf: cleanup remaining SKBs in PTP flowsMilena Olech2-0/+4
When the driver requests Tx timestamp value, one of the first steps is to clone SKB using skb_get. It increases the reference counter for that SKB to prevent unexpected freeing by another component. However, there may be a case where the index is requested, SKB is assigned and never consumed by PTP flows - for example due to reset during running PTP apps. Add a check in release timestamping function to verify if the SKB assigned to Tx timestamp latch was freed, and release remaining SKBs. Fixes: 4901e83a94ef ("idpf: add Tx timestamp capabilities negotiation") Signed-off-by: Milena Olech <milena.olech@intel.com> Signed-off-by: Anton Nadezhdin <anton.nadezhdin@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-1-ef32a425b92a@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-13net/ip6_tunnel: Prevent perpetual tunnel growthDmitry Safonov3-16/+16
Similarly to ipv4 tunnel, ipv6 version updates dev->needed_headroom, too. While ipv4 tunnel headroom adjustment growth was limited in commit 5ae1e9922bbd ("net: ip_tunnel: prevent perpetual headroom growth"), ipv6 tunnel yet increases the headroom without any ceiling. Reflect ipv4 tunnel headroom adjustment limit on ipv6 version. Credits to Francesco Ruggeri, who was originally debugging this issue and wrote local Arista-specific patch and a reproducer. Fixes: 8eb30be0352d ("ipv6: Create ip6_tnl_xmit") Cc: Florian Westphal <fw@strlen.de> Cc: Francesco Ruggeri <fruggeri05@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Link: https://patch.msgid.link/20251009-ip6_tunnel-headroom-v2-1-8e4dbd8f7e35@arista.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-13net: phy: bcm54811: Fix GMII/MII/MII-Lite selectionKamil Horák - 2N2-1/+20
The Broadcom bcm54811 is hardware-strapped to select among RGMII and GMII/MII/MII-Lite modes. However, the corresponding bit, RGMII Enable in Miscellaneous Control Register must be also set to select desired RGMII or MII(-lite)/GMII mode. Fixes: 3117a11fff5af9e7 ("net: phy: bcm54811: PHY initialization") Signed-off-by: Kamil Horák - 2N <kamilh@axis.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20251009130656.1308237-2-kamilh@axis.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-13r8169: fix packet truncation after S4 resume on RTL8168H/RTL8111HLinmao Li1-2/+3
After resume from S4 (hibernate), RTL8168H/RTL8111H truncates incoming packets. Packet captures show messages like "IP truncated-ip - 146 bytes missing!". The issue is caused by RxConfig not being properly re-initialized after resume. Re-initializing the RxConfig register before the chip re-initialization sequence avoids the truncation and restores correct packet reception. This follows the same pattern as commit ef9da46ddef0 ("r8169: fix data corruption issue on RTL8402"). Fixes: 6e1d0b898818 ("r8169:add support for RTL8168H and RTL8107E") Signed-off-by: Linmao Li <lilinmao@kylinos.cn> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/20251009122549.3955845-1-lilinmao@kylinos.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-13net: gro_cells: Use nested-BH locking for gro_cellSebastian Andrzej Siewior1-0/+10
The gro_cell data structure is per-CPU variable and relies on disabled BH for its locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT this data structure requires explicit locking. Add a local_lock_t to the data structure and use local_lock_nested_bh() for locking. This change adds only lockdep coverage and does not alter the functional behaviour for !PREEMPT_RT. Reported-by: syzbot+8715dd783e9b0bef43b1@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/68c6c3b1.050a0220.2ff435.0382.GAE@google.com/ Fixes: 3253cb49cbad ("softirq: Allow to drop the softirq-BKL lock on PREEMPT_RT") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://patch.msgid.link/20251009094338.j1jyKfjR@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-13dpll: zl3073x: Handle missing or corrupted flash configurationIvan Vecera2-0/+24
If the internal flash contains missing or corrupted configuration, basic communication over the bus still functions, but the device is not capable of normal operation (for example, using mailboxes). This condition is indicated in the info register by the ready bit. If this bit is cleared, the probe procedure times out while fetching the device state. Handle this case by checking the ready bit value in zl3073x_dev_start() and skipping DPLL device and pin registration if it is cleared. Do not report this condition as an error, allowing the devlink device to be registered and enabling the user to flash the correct configuration. Prior this patch: [ 31.112299] zl3073x-i2c 1-0070: Failed to fetch input state: -ETIMEDOUT [ 31.116332] zl3073x-i2c 1-0070: error -ETIMEDOUT: Failed to start device [ 31.136881] zl3073x-i2c 1-0070: probe with driver zl3073x-i2c failed with error -110 After this patch: [ 41.011438] zl3073x-i2c 1-0070: FW not fully ready - missing or corrupted config Fixes: 75a71ecc24125 ("dpll: zl3073x: Register DPLL devices and pins") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251008141445.841113-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-13f2fs: fix wrong block mapping for multi-devicesJaegeuk Kim1-1/+1
Assuming the disk layout as below, disk0: 0 --- 0x00035abfff disk1: 0x00035ac000 --- 0x00037abfff disk2: 0x00037ac000 --- 0x00037ebfff and we want to read data from offset=13568 having len=128 across the block devices, we can illustrate the block addresses like below. 0 .. 0x00037ac000 ------------------- 0x00037ebfff, 0x00037ec000 ------- | ^ ^ ^ | fofs 0 13568 13568+128 | ------------------------------------------------------ | LBA 0x37e8aa9 0x37ebfa9 0x37ec029 --- map 0x3caa9 0x3ffa9 In this example, we should give the relative map of the target block device ranging from 0x3caa9 to 0x3ffa9 where the length should be calculated by 0x37ebfff + 1 - 0x37ebfa9. In the below equation, however, map->m_pblk was supposed to be the original address instead of the one from the target block address. - map->m_len = min(map->m_len, dev->end_blk + 1 - map->m_pblk); Cc: stable@vger.kernel.org Fixes: 71f2c8206202 ("f2fs: multidevice: support direct IO") Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2025-10-13f2fs: don't call iput() from f2fs_drop_inode()Mateusz Guzik1-1/+1
iput() calls the problematic routine, which does a ->i_count inc/dec cycle. Undoing it with iput() recurses into the problem. Note f2fs should not be playing games with the refcount to begin with, but that will be handled later. Right now solve the immediate regression. Fixes: bc986b1d756482a ("fs: stop accessing ->i_count directly in f2fs and gfs2") Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202509301450.138b448f-lkp@intel.com Signed-off-by: Mateusz Guzik <mjguzik@gmail.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2025-10-13PCI: cadence: Search for MSI Capability with correct IDHans Zhang1-1/+1
907912c1daa7 ("PCI: cadence: Use cdns_pcie_find_*capability() to avoid hardcoding offsets") incorrectly searched for the MSI-X Capability ID instead of the MSI Capability ID in cdns_pcie_ep_get_msi(). Search for PCI_CAP_ID_MSI, not PCI_CAP_ID_MSIX, to fix this problem. Fixes: 907912c1daa7 ("PCI: cadence: Use cdns_pcie_find_*capability() to avoid hardcoding offsets") Reported-by: Sasha Levin <sashal@kernel.org> Closes: https://lore.kernel.org/r/aOfMk9BW8BH2P30V@laps/ Signed-off-by: Hans Zhang <18255117159@163.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20251010144307.12979-1-18255117159@163.com
2025-10-13x86/mm: Fix SMP ordering in switch_mm_irqs_off()Ingo Molnar1-2/+22
Stephen noted that it is possible to not have an smp_mb() between the loaded_mm store and the tlb_gen load in switch_mm(), meaning the ordering against flush_tlb_mm_range() goes out the window, and it becomes possible for switch_mm() to not observe a recent tlb_gen update and fail to flush the TLBs. [ dhansen: merge conflict fixed by Ingo ] Fixes: 209954cbc7d0 ("x86/mm/tlb: Update mm_cpumask lazily") Reported-by: Stephen Dolan <sdolan@janestreet.com> Closes: https://lore.kernel.org/all/CAHDw0oGd0B4=uuv8NGqbUQ_ZVmSheU2bN70e4QhFXWvuAZdt2w@mail.gmail.com/ Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
2025-10-13x86/mm: Fix overflow in __cpa_addr()Rik van Riel1-1/+1
The change to have cpa_flush() call flush_kernel_pages() introduced a bug where __cpa_addr() can access an address one larger than the largest one in the cpa->pages array. KASAN reports the issue like this: BUG: KASAN: slab-out-of-bounds in __cpa_addr arch/x86/mm/pat/set_memory.c:309 [inline] BUG: KASAN: slab-out-of-bounds in __cpa_addr+0x1d3/0x220 arch/x86/mm/pat/set_memory.c:306 Read of size 8 at addr ffff88801f75e8f8 by task syz.0.17/5978 This bug could cause cpa_flush() to not properly flush memory, which somehow never showed any symptoms in my tests, possibly because cpa_flush() is called so rarely, but could potentially cause issues for other people. Fix the issue by directly calculating the flush end address from the start address. Fixes: 86e6815b316e ("x86/mm: Change cpa_flush() to call flush_kernel_range() directly") Reported-by: syzbot+afec6555eef563c66c97@syzkaller.appspotmail.com Signed-off-by: Rik van Riel <riel@surriel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Kiryl Shutsemau <kas@kernel.org> Link: https://lore.kernel.org/all/68e2ff90.050a0220.2c17c1.0038.GAE@google.com/
2025-10-13cxl/features: Add check for no entries in cxl_feature_infoDave Jiang1-0/+3
cxl EDAC calls cxl_feature_info() to get the feature information and if the hardware has no Features support, cxlfs may be passed in as NULL. [ 51.957498] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 51.965571] #PF: supervisor read access in kernel mode [ 51.971559] #PF: error_code(0x0000) - not-present page [ 51.977542] PGD 17e4f6067 P4D 0 [ 51.981384] Oops: Oops: 0000 [#1] SMP NOPTI [ 51.986300] CPU: 49 UID: 0 PID: 3782 Comm: systemd-udevd Not tainted 6.17.0dj test+ #64 PREEMPT(voluntary) [ 51.997355] Hardware name: <removed> [ 52.009790] RIP: 0010:cxl_feature_info+0xa/0x80 [cxl_core] Add a check for cxlfs before dereferencing it and return -EOPNOTSUPP if there is no cxlfs created due to no hardware support. Fixes: eb5dfcb9e36d ("cxl: Add support to handle user feature commands for set feature") Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2025-10-13btrfs: send: fix -Wflex-array-member-not-at-end warning in struct send_ctxGustavo A. R. Silva1-1/+3
The warning -Wflex-array-member-not-at-end was introduced in GCC-14, and we are getting ready to enable it, globally. Fix the following warning: fs/btrfs/send.c:181:24: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] and move the declaration of send_ctx::cur_inode_path to the end. Notice that struct fs_path contains a flexible array member inline_buf, but also a padding array and a limit calculated for the usable space of inline_buf (FS_PATH_INLINE_SIZE). It is not the pattern where flexible array is in the middle of a structure and could potentially overwrite other members. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-10-13btrfs: tree-checker: fix bounds check in check_inode_extref()Dan Carpenter1-1/+1
The parentheses for the unlikely() annotation were put in the wrong place so it means that the condition is basically never true and the bounds checking is skipped. Fixes: aab9458b9f00 ("btrfs: tree-checker: add inode extref checks") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-12-25 22:02:31 +0000