aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/amdgpu (follow)
AgeCommit message (Collapse)AuthorFilesLines
2023-06-09drm/amdgpu: Use instance lookup table for GC 9.4.3Lijo Lazar4-271/+279
Register accesses need to be based on physical instance on bare metal. Pass the right instance using logical to physical instance lookup table before accessing registers. Add a macro GET_INST to get the right physical instance of an IP corresponding to a logical instance. v2: fix gfx_v9_4_3_check_rlcg_range() (Alex) Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Le Ma <Le.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Add map of logical to physical instLijo Lazar1-0/+10
Add a map for logical to physical instances of an IP. For ex: on some device configurations, the first logical XCC may not be the first physical XCC. Software may continue to access in logical IP instance order. The map provides a convenient way to get to the actual physical instance. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Le Ma <Le.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdkfd: Add device repartition supportMukul Joshi4-5/+45
GFX9.4.3 will support dynamic repartitioning of the GPU through sysfs. Add device repartitioning support in KFD to repartition GPU from one mode to other. v2: squash in fix ("drm/amdkfd: Fix warning kgd2kfd_unlock_kfd defined but not used") Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: configure the doorbell settings for sdma on non-AID0Le Ma1-9/+56
Configure the sdma doorbell settings on NBIF0 and SYSHUB of each AID v2: fetch aid_id from amdgpu_sdma_instance (Lijo) Signed-off-by: Le Ma <le.ma@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: add indirect r/w interface for smn address greater than 32bitsLe Ma5-0/+118
On multiple AIDs platform, bit[34:32] in SMD address is leveraged to access nonAID0 register smn address and new PCI_INDEX_HI register is introduced to access the higher bits. v2: rebase on latest register accessors (Alex) Signed-off-by: Le Ma <le.ma@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: reflect psp xgmi topology info for gfx9.4.3Jonathan Kim1-4/+7
Similar to GFX9.4.2 non-A+A devices, GFX9.4.3 psp xgmi topology info is half duplex and requires the driver to fill in the bidirectional info. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Shiwu Zhang <shiwu.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu/vcn: update amdgpu_fw_shared to amdgpu_vcn4_fw_sharedJames Zhu1-29/+11
Use amdgpu_vcn4_fw_shared for vcn 4.0.3. Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu/vcn: remove unused codeJames Zhu1-121/+0
Remove unused code. Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu/vcn: update ucode setupJames Zhu1-10/+1
Use common amdgpu_vcn_setup_ucode for ucode setup. Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu/vcn: update new doorbell mapJames Zhu3-5/+5
New doorbell map is used for VCN 4.0.3. Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu/jpeg: update jpeg header to support multiple AIDsJames Zhu1-0/+2
Add aid_id in jpeg header to support multiple AIDs. Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu/vcn: update vcn header to support multiple AIDsJames Zhu1-0/+3
Add aid_id in vcn header to support multiple AIDs Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu/vcn: use vcn4 irqsrc header for VCN 4.0.3James Zhu1-3/+3
Use vcn4 irqsrc header for VCN 4.0.3. Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Change num_xcd to xcc_maskLijo Lazar6-94/+136
Instead of number of XCCs, keep a mask of XCCs for the exact XCCs available on the ASIC. XCC configuration could differ based on different ASIC configs. v2: Rename num_xcd to num_xcc (Hawking) Use smaller xcc_mask size, changed to u16 (Le) Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Le Ma <Le.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: add the support of XGMI link for GC 9.4.3Shiwu Zhang2-4/+47
Add the xgmi LFB_CNTL/LBF_SIZE reg addresses to fetch the xgmi info from. v2: move get_xgmi_info() to GC_V9_4_3 sepecific source files to utilize the register definitions specific for GC_V9_4_3 v3: remove the duplicated register definitions v4: enable xgmi based on asic_type as XGMI_IP ver is not available yet for IP discovery Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com> Reviewed-by: Le Ma <Le.Ma@amd.com> Ack-by: Lijo Lazar <Lijo.Lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: add new vram type for dgpuHawking Zhang1-0/+1
hbm3 will be supported in some dgpu program Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Le Ma <Le.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: introduce new doorbell assignment table for GC 9.4.3Le Ma4-32/+33
Four basic reasons as below to do the change: 1. number of ring expand a lot on GC 9.4.3, and adjustment on old assignment cannot make each ring in a continuous doorbell space. 2. the SDMA doorbell index should not exceed 0x1FF on SDMA 4.2.2 due to regDOORBELLx_CTRL_ENTRY.BIF_DOORBELLx_RANGE_OFFSET_ENTRY field width. 3. re-design the doorbell assignment and unify the calculation as "start + ring/inst id" will make the code much concise. 4. only defining the START/END makes the table look simple v2: (Lijo) 1. replace name 2. use num_inst_per_aid/sdma_doorbell_range instead of hardcoding Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: program GRBM_MCM_ADDR for non-AID0 GRBMLe Ma1-0/+3
Otherwise the EOP interrupt on non-AID0 cannot route to IH0. Signed-off-by: Le Ma <le.ma@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: convert the doorbell_index to 2 dwords offset for kiqLe Ma1-4/+3
KIQ doorbell_index is non-zero from XCC1, thus need to left-shift it like other rings. Signed-off-by: Le Ma <le.ma@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: set mmhub bitmask for multiple AIDsLe Ma1-1/+1
Like GFXHUB, set MMHUB0 bitmask for each AID. Signed-off-by: Le Ma <le.ma@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: complement the IH node_id table for multiple AIDsLe Ma3-1/+12
With different node_id, the SDMA interrupt from multiple AIDs can be distinguished by sw driver. Signed-off-by: Le Ma <le.ma@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: correct the vmhub reference for each XCD in gfxhub initLe Ma1-4/+8
Correct this though the value is same across different vmhub. Signed-off-by: Le Ma <le.ma@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: do mmhub init for multiple AIDsLe Ma1-261/+348
Mmhub on each AID needs to be initialized respectively Signed-off-by: Le Ma <le.ma@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: assign the doorbell index for sdma on non-AID0Le Ma2-3/+21
Allocate new sdma doorbell index for the instances only on AID1 for now. Todo: there's limitation that SDMA doorbell index on SDMA 4.4.2 needs to be less than 0x1FF, so the tail part in _AMDGPU_VEGA20_DOORBELL_ASSIGNMENT is not enough to store sdma doorbell range on maximum 4 AIDs if doorbell_range is 20. So it looks better to create a new doorbell index assignment table for 4.4.2. v2: change "(x << 1) + 2" to "(x + 1) << 1" for readability. Signed-off-by: Le Ma <le.ma@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: add support for SDMA on multiple AIDsLe Ma2-7/+21
Initialize SDMA instances on each AID. v2: revise coding fault in hw_fini Signed-off-by: Le Ma <le.ma@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: adjust some basic elements for multiple AID caseLe Ma3-3/+6
add some elements below: - num_aid - aid_id for each sdma instance - num_inst_per_aid for sdma and extend macro size below: - SDMA_MAX_INSTANCES to 16 - AMDGPU_MAX_RINGS to 96 - AMDGPU_MAX_HWIP_RINGS to 32 v2: move aid_id from amdgpu_ring to amdgpu_sdma_instance. (Lijo) Signed-off-by: Le Ma <le.ma@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: assign the doorbell index in 1st page to sdma page queueLe Ma3-7/+17
Previously for vega10, the sdma_doorbell_range is only enough for sdma gfx queue, thus the index on second doorbell page is allocated for sdma page queue. From vega20, the sdma_doorbell_range on 1st page is enlarged. Therefore, just leverage these index instead of allocation on 2nd page. v2: change "(x << 1) + 2" to "(x + 1) << 1" for readability and add comments. Signed-off-by: Le Ma <le.ma@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Set XNACK per process on GC 9.4.3Amber Lin2-3/+5
Set RETRY_PERMISSION_OR_INVALID_PAGE_FAULT bit in VM_CONTEXT1_CNTL as well so XNACK can be enabled in the SQ per process. Signed-off-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Use new atomfirmware init for GC 9.4.3Lijo Lazar1-1/+2
Use the new atomfirmware initialization logic for GC 9.4.3 based ASICs also. ASIC init logic doesn't consider boot clocks during init. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Fix CP_HYP_XCP_CTL register programming in CPX modeMukul Joshi1-1/+1
Currently, in CPX mode, the CP_HYP_XCP_CTL register is programmed incorrectly with the number of XCCs in the partition. As a result, HIQ doesn't work in CPX mode. Fix this by programming the correct number of XCCs in a partition, which is 1, in CPX mode. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Le Ma <Le.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdkfd: Update SDMA queue management for GFX9.4.3Mukul Joshi1-4/+190
This patch updates SDMA queue management for multi XCC in GFX9.4.3. - Allocate/deallocate SDMA queues from the correct SDMA engines based on the partition mode. - Updates the kgd2kfd interface to fetch the correct SDMA register addresses. - It also fixes dumping correct SDMA queue info in debugfs. v2: squash in fix "drm/amdkfd: Fix XGMI SDMA user-mode queue allocation" Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Fix VM fault reporting on XCC1Mukul Joshi1-3/+5
Fix VM fault reporting and clear VM fault register for XCC1. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Add XCC inst to PASID TLB flushingMukul Joshi8-16/+20
Add XCC instance to select the correct KIQ ring when flushing TLBs on a multi-XCC setup. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Tested-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdkfd: Add XCC instance to kgd2kfd interface (v3)Mukul Joshi8-158/+171
Gfx 9 starts to have multiple XCC instances in one device. Add instance parameter to kgd2kfd functions where XCC instance was hard coded as 0. Also, update code to pass the correct instance number when running on a multi-XCC setup. v2: introduce the XCC instance to gfx v11 (Morris) v3: rebase (Alex) Signed-off-by: Amber Lin <Amber.Lin@amd.com> Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: Amber Lin <Amber.Lin@amd.com> Signed-off-by: Morris Zhang <Shiwu.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdkfd: Update MQD management on multi XCC setupMukul Joshi1-15/+36
Update MQD management for both HIQ and user-mode compute queues on a multi XCC setup. MQDs needs to be allocated, initialized, loaded and destroyed for each XCC in the KFD node. v2: squash in fix "drm/amdkfd: Fix SDMA+HIQ HQD allocation on GFX9.4.3" Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Signed-off-by: Amber Lin <Amber.Lin@amd.com> Tested-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdkfd: Introduce kfd_node struct (v5)Mukul Joshi1-0/+1
Introduce a new structure, kfd_node, which will now represent a compute node. kfd_node is carved out of kfd_dev structure. kfd_dev struct now will become the parent of kfd_node, and will store common resources such as doorbells, GTT sub-alloctor etc. kfd_node struct will store all resources specific to a compute node, such as device queue manager, interrupt handling etc. This is the first step in adding compute partition support in KFD. v2: introduce kfd_node struct to gc v11 (Hawking) v3: make reference to kfd_dev struct through kfd_node (Morris) v4: use kfd_node instead for kfd isr/mqd functions (Morris) v5: rebase (Alex) Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Tested-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Morris Zhang <Shiwu.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Add mode2 reset logic for v13.0.6Lijo Lazar1-0/+2
Mode2 reset for v13.0.6 has similar workflow as v13.0.2 Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Add some XCC programmingLijo Lazar1-0/+26
Add additional XCC programming sequences. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: add node_id to physical id conversion in EOP handlerLe Ma3-2/+29
A new field nodeid in interrupt cookie indicates the node ID. Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Shiwu Zhang <shiwu.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: enable the ring and IB test for slave kcqShiwu Zhang3-44/+32
With the mec FW update to utilize the mqd base set by driver for kcq mapping, slave kcq ring test and IB test can be re-enabled. Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com> Reviewed-by: Le Ma <Le.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: support gc v9_4_3 ring_test running on all xccHawking Zhang1-4/+7
Each xcc has its own sratch_reg offset Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Le Ma <Le.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: fix vcn doorbell range settingJames Zhu1-1/+1
Should use vcn_ring0_1 instead of doorbell index to set nbio doorbell range. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Sonny Jiang <sonny.jiang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu/jpeg: enable jpeg doorbell for jpeg4.0.3James Zhu1-2/+11
Enable jpeg doorbell for jpeg4.0.3. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu/vcn: enable vcn doorbell for vcn4.0.3James Zhu1-1/+9
Enable vcn doorbell for vcn4.0.3. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu/nbio: update vcn doorbell rangeJames Zhu1-2/+2
VCN4.0.3 used up to 16 doorbells per partition. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu/jpeg: add multiple jpeg rings support for vcn4_0_3James Zhu2-68/+147
Add multiple jpeg rings support for vcn4_0_3 Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu/jpeg: add multiple jpeg rings supportJames Zhu10-65/+69
Add multiple jpeg rings support. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu/vcn: enable vcn DPG mode for VCN4_0_3James Zhu1-0/+1
Enable vcn DPG mode for VCN4_0_3. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu/vcn: enable vcn pg for VCN4_0_3James Zhu1-0/+1
Enable vcn pg for VCN4_0_3. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu/vcn: enable vcn cg for VCN4_0_3James Zhu1-0/+1
Enable vcn cg for VCN4_0_3. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-12-26 09:16:12 +0000