aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display (follow)
AgeCommit message (Collapse)AuthorFilesLines
2025-08-29drm/amd/display: Promote DC to 3.2.348Taimur Hassan1-1/+1
Summary: * Refactor bounding box values handling * Fix incorrect condition to fail dto clk calculation * Skip check downlink setting for a certain MST branch device * Fix double cursor issue on dcn314 Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-29drm/amd/display: [FW Promotion] Release 0.1.25.0Taimur Hassan1-6/+7
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-29drm/amd/display: Skip Check Runtime Link Setting for Specific Branch DeviceFangzhi Zuo2-2/+41
[why] Read link setting inside mode validation is not always the final downlink setting. It is found true in Synaptics branch device. At bootup, the preferred mode being set right after 1080p is set. It occurred before graphic load. That modeset switch in a short period of time makes the branch device switch back and forth from lower and higher link rate, observed at Synaptics branch device. DP2 RTK hub on the other hand, sticks to highest available downlink rate after bootup. Existing check of runtime downlink setting in mode validation shows asynchronous at branch device link switch, i.e., downlink switch to higher link rate not yet complete when the mode validation tries to probe the downlink setting. That makes mode validation checking downlink setting making wrong decision by pruning modes that should pass the validation after the downlink setting switch is complete. [how] If Synaptics is found at the last branch, skip checking downlink setting at mode validation. Reviewed-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-29drm/amd/display: Clear the CUR_ENABLE register on DCN314 w/out DPP PGIvan Lipski7-0/+90
[Why&How] ON DCN314, clearing DPP SW structure without power gating it can cause a double cursor in full screen with non-native scaling. A W/A that clears CURSOR0_CONTROL cursor_enable flag if dcn10_plane_atomic_power_down is called and DPP power gating is disabled. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4168 Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-29drm/amd/display: incorrect conditions for failing dto calculationsClay King1-1/+1
[Why & How] Previously, when calculating dto phase, we would incorrectly fail when phase <=0 without additionally checking for the integer value. This meant that calculations would incorrectly fail when the desired pixel clock was an exact multiple of the reference clock. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Clay King <clayking@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-29drm/amd/display: Add Component To Handle Bounding Box Values and IP CapsAustin Zheng13-356/+475
[Why] Bounding box values can be stored in multiple locations. (e.g. PMFW, VBIOS, DMUB). The source and interpretation of these values can vary with DCN revision so there should be a component that can gather these values and translate them accordingly [How] Have component start with the statically defined values as a base. Then update them as needed with DCN-specific logic Guard this component with FPU flags since values need to be in float point. Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-29drm/amd/display: Optimize custom brightness curve interpolationMario Limonciello1-26/+38
[Why] Custom brightness curve works by walking through all data points one by one. When the brightness value is at either extreme this is a lot of data points to walk. This is especially noticeable when moving a brightness slider around how it can lag. [How] Bisect the data points to find the closest for interpolation. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-29drm/amd/display: Increase minimum clock for TMDS 420 with pipe splittingRelja Vojvodic1-9/+19
[Why] -Pipe splitting allows for clocks to be reduced, but when using TMDS 420, reduced clocks lead to missed clocks cycles on clock resyncing [How] -Impose a minimum clock when using TMDS 420 Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Relja Vojvodic <rvojvodi@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-29drm/amd: Re-enable common modes for eDP and LVDSMario Limonciello1-2/+1
[Why] Although compositors will add their own modes, Xorg won't use it's own modes and will only stick to modes advertised by the driver. This mean a user that used to pick 1024x768 could no longer access it unless the panel's native resolution was 1024x768. [How] Revert commit 6d396e7ac1ce3 ("drm/amd/display: Disable common modes for LVDS") and commit 7948afb46af92 ("drm/amd/display: Disable common modes for eDP"). The panel will still use scaling for any non-native modes due to commit 978fa2f6d0b12 ("drm/amd/display: Use scaling for non-native resolutions on eDP") Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4538 Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250828140856.2887993-1-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-29drm/amd/display: use max() to improve codeQianfeng Rong3-15/+4
Use max() to reduce the code and improve readability. No functional changes. Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-29drm/amd/display: Document num_rmcm_3dluts in mpc_color_capsKavithesh A.S1-0/+1
Fix a kernel-doc warning by documenting the num_rmcm_3dluts member of struct mpc_color_caps. v2: improve comment (Melissa) Signed-off-by: Kavithesh A.S <kavitheshnitt@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-27drm/amd/display: DC v3.2.347Nicholas Carbones1-1/+1
DC Release v3.2.347 * Firmware releases for multiple asics * CodeQL fixes * Fix for double cursor with 180 degree rotation on large resolutions * Misc bug fixes for DSC, PSR/Replay, DPIA etc. Signed-off-by: Nicholas Carbones <ncarbone@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-27drm/amd/display: [FW Promotion] Release 0.1.24.0Taimur Hassan1-0/+4
Add two new IPS residency data modes. Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-27drm/amd/display: Consider sink max slice width limitation for dscDillon Varone1-0/+5
[WHY&HOW] The sink max slice width limitation should be considered for DSC, but was removed in "refactor DSC cap calculations". This patch adds it back and takes the valid minimum between the sink and source. Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-27drm/amd/display: Array offset used before range checkClay King5-5/+5
Consolidating multiple CodeQL Fixes for alerts with rule id: cpp/offset-use-before-range-check Reviewed-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Clay King <clayking@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-27drm/amd/display: wait for otg update pending latch before clock optimizationYihan Zhu4-0/+22
[WHY & HOW] OTG pending update unlatched will cause system fail, wait OTG fully disabled to avoid this error. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-27drm/amd/display: Incorrect 'not' operator usageClay King8-8/+8
Consolidating multiple CodeQL Fixes for alerts with rule id: cpp/incorrect-not-operator-usage Reviewed-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Clay King <clayking@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-27drm/amd/display: Multiplication result converted to larger typeClay King7-16/+16
Consolidating multiple CodeQL Fixes for alerts with rule id: cpp/integer-multiplication-cast-to-long Reviewed-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Clay King <clayking@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-27drm/amd/display: Support HW cursor 180 rot for any number of pipe splitsIvan Lipski1-46/+27
[Why] For the HW cursor, its current position in the pipe_ctx->stream struct is not affected by the 180 rotation, i. e. the top left corner is still at 0,0. However, the DPP & HUBP set_cursor_position functions require rotated position. The current approach is hard-coded for ODM 2:1, thus it's failing for ODM 4:1, resulting in a double cursor. [How] Instead of calculating the new cursor position relatively to the viewports, we calculate it using a viewavable clip_rect of each plane. The clip_rects are first offset and scaled to the same space as the src_rect, i. e. Stream space -> Plane space. In case of a pipe split, which divides the plane into 2 or more viewports, the clip_rect is the union of all the viewports of the given plane. With the assumption that the viewports in HUBP's set_cursor_position are in the Plane space as well, it should produce a correct cursor position for any number of pipe splits. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-27drm/amd/display: Decrease stack size in logging pathReza Amini1-2/+2
[why] Reducing stack size can avoid stack over flow [how] Make local variables const and static so they are not on the stack. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Reza Amini <reza.amini@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-27drm/amd/display: track dpia supportAusef Yousof2-3/+5
[why&how] initialize a flag to track if we previously supported dpia and write that to boot options Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-27drm/amd/display: Reserve instance index notified by DMUBCruise Hung3-5/+7
[Why] Reserve instance index notified by DMUB. [How] Add new variable for instance index. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-27drm/amd/display: Add control flags to force PSR / replayKarthi Kandasamy4-1/+10
To change PSR/Replay behavior based on OS preferences, add some config options. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-27drm/amd/display: clean-up dead code in dml2_mall_phantomBrahmajit Das1-4/+2
pipe_idx in funtion dml2_svp_validate_static_schedulabilit, although set is never actually used. While building with GCC 16 this gives a warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_mall_phantom.c: In function ‘set_phantom_stream_timing’: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_mall_phantom.c:657:25: warning: variable ‘pipe_idx’ set but not used [-Wunused-but-set-variable=] 657 | unsigned int i, pipe_idx; | ^~~~~~~~ Signed-off-by: Brahmajit Das <listout@listout.xyz> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-27drm/amd/display: Remove redundant header filesLiao Yuanhong1-2/+0
The header file "dc_stream.h" is already included on line 1507. Remove the redundant include. This is because the header file was initially included towards the latter part of the code. Subsequent commits had to include the header file again earlier in the code. In my opinion, this doesn't count as a fix; it just requires removing the redundant header inclusion. Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-18drm/amd/display: Fix DP audio DTO1 clock source on DCE 6.Timur Kristóf1-15/+6
On DCE 6, DP audio was not working. However, it worked when an HDMI monitor was also plugged in. Looking at dce_aud_wall_dto_setup it seems that the main difference is that we use DTO1 when only DP is plugged in. When programming DTO1, it uses audio_dto_source_clock_in_khz which is set from get_dp_ref_freq_khz The dce60_get_dp_ref_freq_khz implementation looks incorrect, because DENTIST_DISPCLK_CNTL seems to be always zero on DCE 6, so it isn't usable. I compared dce60_get_dp_ref_freq_khz to the legacy display code, specifically dce_v6_0_audio_set_dto, and it turns out that in case of DCE 6, it needs to use the display clock. With that, DP audio started working on Pitcairn, Oland and Cape Verde. However, it still didn't work on Tahiti. Despite having the same DCE version, Tahiti seems to have a different audio device. After some trial and error I realized that it works with the default display clock as reported by the VBIOS, not the current display clock. The patch was tested on all four SI GPUs: * Pitcairn (DCE 6.0) * Oland (DCE 6.4) * Cape Verde (DCE 6.0) * Tahiti (DCE 6.0 but different) The testing was done on Samsung Odyssey G7 LS28BG700EPXEN on each of the above GPUs, at the following settings: * 4K 60 Hz * 1080p 60 Hz * 1080p 144 Hz Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 645cc7863da5de700547d236697dffd6760cf051) Cc: stable@vger.kernel.org
2025-08-18drm/amd/display: Fix fractional fb divider in set_pixel_clock_v3Timur Kristóf1-1/+1
For later VBIOS versions, the fractional feedback divider is calculated as the remainder of dividing the feedback divider by a factor, which is set to 1000000. For reference, see: - calculate_fb_and_fractional_fb_divider - calc_pll_max_vco_construct However, in case of old VBIOS versions that have set_pixel_clock_v3, they only have 1 byte available for the fractional feedback divider, and it's expected to be set to the remainder from dividing the feedback divider by 10. For reference see the legacy display code: - amdgpu_pll_compute - amdgpu_atombios_crtc_program_pll This commit fixes set_pixel_clock_v3 by dividing the fractional feedback divider passed to the function by 100000. Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 027e7acc7e17802ebf28e1edb88a404836ad50d6) Cc: stable@vger.kernel.org
2025-08-18drm/amd/display: Don't print errors for nonexistent connectorsTimur Kristóf2-5/+15
When getting the number of connectors, the VBIOS reports the number of valid indices, but it doesn't say which indices are valid, and not every valid index has an actual connector. If we don't find a connector on an index, that is not an error. Considering these are not actual errors, don't litter the logs. Fixes: 60df5628144b ("drm/amd/display: handle invalid connector indices") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 249d4bc5f1935f04bb45b3b63c0f8922565124f7)
2025-08-18drm/amd/display: Don't warn when missing DCE encoder capsTimur Kristóf1-4/+4
On some GPUs the VBIOS just doesn't have encoder caps, or maybe not for every encoder. This isn't really a problem and it's handled well, so let's not litter the logs with it. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 33e0227ee96e62d034781e91f215e32fd0b1d512)
2025-08-18drm/amd/display: Fill display clock and vblank time in ↵Timur Kristóf3-11/+3
dce110_fill_display_configs Also needed by DCE 6. This way the code that gathers this info can be shared between different DCE versions and doesn't have to be repeated. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 8107432dff37db26fcb641b6cebeae8981cd73a0) Cc: stable@vger.kernel.org
2025-08-18drm/amd/display: Find first CRTC and its line time in ↵Timur Kristóf1-10/+20
dce110_fill_display_configs dce110_fill_display_configs is shared between DCE 6-11, and finding the first CRTC and its line time is relevant to DCE 6 too. Move the code to find it from DCE 11 specific code. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 4ab09785f8d5d03df052827af073d5c508ff5f63) Cc: stable@vger.kernel.org
2025-08-18drm/amd/display: Adjust DCE 8-10 clock, don't overclock by 15%Timur Kristóf1-7/+5
Adjust the nominal (and performance) clocks for DCE 8-10, and set them to 625 MHz, which is the value used by the legacy display code in amdgpu_atombios_get_clock_info. This was tested with Hawaii, Tonga and Fiji. These GPUs can output 4K 60Hz (10-bit depth) at 625 MHz. The extra 15% clock was added as a workaround for a Polaris issue which uses DCE 11, and should not have been used on DCE 8-10 which are already hardcoded to the highest possible display clock. Unfortunately, the extra 15% was mistakenly copied and kept even on code paths which don't affect Polaris. This commit fixes that and also adds a check to make sure not to exceed the maximum DCE 8-10 display clock. Fixes: 8cd61c313d8b ("drm/amd/display: Raise dispclk value for Polaris") Fixes: dc88b4a684d2 ("drm/amd/display: make clk mgr soc specific") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 1ae45b5d4f371af8ae51a3827d0ec9fe27eeb867)
2025-08-18drm/amd/display: Don't overclock DCE 6 by 15%Timur Kristóf1-5/+3
The extra 15% clock was added as a workaround for a Polaris issue which uses DCE 11, and should not have been used on DCE 6 which is already hardcoded to the highest possible display clock. Unfortunately, the extra 15% was mistakenly copied and kept even on code paths which don't affect Polaris. This commit fixes that and also adds a check to make sure not to exceed the maximum DCE 6 display clock. Fixes: 8cd61c313d8b ("drm/amd/display: Raise dispclk value for Polaris") Fixes: dc88b4a684d2 ("drm/amd/display: make clk mgr soc specific") Fixes: 3ecb3b794e2c ("drm/amd/display: dc/clk_mgr: add support for SI parts (v2)") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 427980c1cbd22bb256b9385f5ce73c0937562408) Cc: stable@vger.kernel.org
2025-08-18drm/amd/display: Add null pointer check in mod_hdcp_hdcp1_create_session()Chenyuan Yang1-0/+3
The function mod_hdcp_hdcp1_create_session() calls the function get_first_active_display(), but does not check its return value. The return value is a null pointer if the display list is empty. This will lead to a null pointer dereference. Add a null pointer check for get_first_active_display() and return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null. This is similar to the commit c3e9826a2202 ("drm/amd/display: Add null pointer check for get_first_active_display()"). Fixes: 2deade5ede56 ("drm/amd/display: Remove hdcp display state with mst fix") Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 5e43eb3cd731649c4f8b9134f857be62a416c893)
2025-08-18drm/amd/display: Fix Xorg desktop unresponsive on Replay panelTom Chung1-0/+19
[WHY & HOW] IPS & self-fresh feature can cause vblank counter resets between vblank disable and enable. It may cause system stuck due to wait the vblank counter. Call the drm_crtc_vblank_restore() during vblank enable to estimate missed vblanks by using timestamps and update the vblank counter in DRM. It can make the vblank counter increase smoothly and resolve this issue. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 34d66bc7ff10e146a4cec76cf286979740a10954) Cc: stable@vger.kernel.org
2025-08-18drm/amd/display: Avoid a NULL pointer dereferenceMario Limonciello1-0/+3
[WHY] Although unlikely drm_atomic_get_new_connector_state() or drm_atomic_get_old_connector_state() can return NULL. [HOW] Check returns before dereference. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 1e5e8d672fec9f2ab352be121be971877bff2af9) Cc: stable@vger.kernel.org
2025-08-18drm/amd/display: Revert Add HPO encoder support to ReplayGabe Teeger4-62/+5
This reverts commits: commit 1f26214d268b ("drm/amd/display: Add HPO encoder support to Replay") commit 3bfce48b109f ("drm/amd/display: Add support for Panel Replay on DP1 eDP (panel_inst=1)") due to visual confirm issue. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 92f68f6a1b297633159a3f3759e4dfc7e5b58abb)
2025-08-18drm/amd/display: Fix DP audio DTO1 clock source on DCE 6.Timur Kristóf1-15/+6
On DCE 6, DP audio was not working. However, it worked when an HDMI monitor was also plugged in. Looking at dce_aud_wall_dto_setup it seems that the main difference is that we use DTO1 when only DP is plugged in. When programming DTO1, it uses audio_dto_source_clock_in_khz which is set from get_dp_ref_freq_khz The dce60_get_dp_ref_freq_khz implementation looks incorrect, because DENTIST_DISPCLK_CNTL seems to be always zero on DCE 6, so it isn't usable. I compared dce60_get_dp_ref_freq_khz to the legacy display code, specifically dce_v6_0_audio_set_dto, and it turns out that in case of DCE 6, it needs to use the display clock. With that, DP audio started working on Pitcairn, Oland and Cape Verde. However, it still didn't work on Tahiti. Despite having the same DCE version, Tahiti seems to have a different audio device. After some trial and error I realized that it works with the default display clock as reported by the VBIOS, not the current display clock. The patch was tested on all four SI GPUs: * Pitcairn (DCE 6.0) * Oland (DCE 6.4) * Cape Verde (DCE 6.0) * Tahiti (DCE 6.0 but different) The testing was done on Samsung Odyssey G7 LS28BG700EPXEN on each of the above GPUs, at the following settings: * 4K 60 Hz * 1080p 60 Hz * 1080p 144 Hz Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-18drm/amd/display: Fix fractional fb divider in set_pixel_clock_v3Timur Kristóf1-1/+1
For later VBIOS versions, the fractional feedback divider is calculated as the remainder of dividing the feedback divider by a factor, which is set to 1000000. For reference, see: - calculate_fb_and_fractional_fb_divider - calc_pll_max_vco_construct However, in case of old VBIOS versions that have set_pixel_clock_v3, they only have 1 byte available for the fractional feedback divider, and it's expected to be set to the remainder from dividing the feedback divider by 10. For reference see the legacy display code: - amdgpu_pll_compute - amdgpu_atombios_crtc_program_pll This commit fixes set_pixel_clock_v3 by dividing the fractional feedback divider passed to the function by 100000. Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-18drm/amd/display: Don't print errors for nonexistent connectorsTimur Kristóf2-5/+15
When getting the number of connectors, the VBIOS reports the number of valid indices, but it doesn't say which indices are valid, and not every valid index has an actual connector. If we don't find a connector on an index, that is not an error. Considering these are not actual errors, don't litter the logs. Fixes: 60df5628144b ("drm/amd/display: handle invalid connector indices") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-18drm/amd/display: Don't warn when missing DCE encoder capsTimur Kristóf1-4/+4
On some GPUs the VBIOS just doesn't have encoder caps, or maybe not for every encoder. This isn't really a problem and it's handled well, so let's not litter the logs with it. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-18drm/amd/display: Fill display clock and vblank time in ↵Timur Kristóf3-11/+3
dce110_fill_display_configs Also needed by DCE 6. This way the code that gathers this info can be shared between different DCE versions and doesn't have to be repeated. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-18drm/amd/display: Find first CRTC and its line time in ↵Timur Kristóf1-10/+20
dce110_fill_display_configs dce110_fill_display_configs is shared between DCE 6-11, and finding the first CRTC and its line time is relevant to DCE 6 too. Move the code to find it from DCE 11 specific code. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-18drm/amd/display: Adjust DCE 8-10 clock, don't overclock by 15%Timur Kristóf1-7/+5
Adjust the nominal (and performance) clocks for DCE 8-10, and set them to 625 MHz, which is the value used by the legacy display code in amdgpu_atombios_get_clock_info. This was tested with Hawaii, Tonga and Fiji. These GPUs can output 4K 60Hz (10-bit depth) at 625 MHz. The extra 15% clock was added as a workaround for a Polaris issue which uses DCE 11, and should not have been used on DCE 8-10 which are already hardcoded to the highest possible display clock. Unfortunately, the extra 15% was mistakenly copied and kept even on code paths which don't affect Polaris. This commit fixes that and also adds a check to make sure not to exceed the maximum DCE 8-10 display clock. Fixes: 8cd61c313d8b ("drm/amd/display: Raise dispclk value for Polaris") Fixes: dc88b4a684d2 ("drm/amd/display: make clk mgr soc specific") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-18drm/amd/display: Don't overclock DCE 6 by 15%Timur Kristóf1-5/+3
The extra 15% clock was added as a workaround for a Polaris issue which uses DCE 11, and should not have been used on DCE 6 which is already hardcoded to the highest possible display clock. Unfortunately, the extra 15% was mistakenly copied and kept even on code paths which don't affect Polaris. This commit fixes that and also adds a check to make sure not to exceed the maximum DCE 6 display clock. Fixes: 8cd61c313d8b ("drm/amd/display: Raise dispclk value for Polaris") Fixes: dc88b4a684d2 ("drm/amd/display: make clk mgr soc specific") Fixes: 3ecb3b794e2c ("drm/amd/display: dc/clk_mgr: add support for SI parts (v2)") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-18drm/amd/display: replace min/max nesting with clamp()Xichao Zhao1-2/+2
The clamp() macro explicitly expresses the intent of constraining a value within bounds.Therefore, replacing min(max(a, b), c) with clamp(val, lo, hi) can improve code readability. Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-18drm/amd/display: Use swap() to simplify codeLiao Yuanhong1-4/+2
Replace the original swapping logic with swap() to improve readability and remove temporary variables Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-18drm/amd/display: Clean up coding styleXichao Zhao1-4/+4
Adjust whitespace around operators to improve code readability and comply with kernel coding style guidelines. These changes are purely stylistic and introduce no functional modifications. Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-18drm/amd/display: Add null pointer check in mod_hdcp_hdcp1_create_session()Chenyuan Yang1-0/+3
The function mod_hdcp_hdcp1_create_session() calls the function get_first_active_display(), but does not check its return value. The return value is a null pointer if the display list is empty. This will lead to a null pointer dereference. Add a null pointer check for get_first_active_display() and return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null. This is similar to the commit c3e9826a2202 ("drm/amd/display: Add null pointer check for get_first_active_display()"). Fixes: 2deade5ede56 ("drm/amd/display: Remove hdcp display state with mst fix") Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-18drm/amd/display: Promote DC to 3.2.346Taimur Hassan1-1/+1
This version brings along following updates: - Fix Xorg desktop unresponsive on Replay panel - [FW Promotion] Release 0.1.23.0 - Avoid a NULL pointer dereference - Attach privacy screen to DRM connector - Setup Second Stutter Watermark Implementation - Align LSDMA commands fields - Delete unused functions - Optimize amdgpu_dm_atomic_commit_tail() - Add primary plane to commits for correct VRR handling - Refactor DPP enum for backwards compatibility. - Add LSDMA Linear Sub Window Copy support Acked-by: Sun peng (Leo) Li <sunpeng.li@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-12-13 13:45:50 +0000