| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add check for gphy in enable/disable phy calls and set power bits
in gphy control register.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250814002530.5866-3-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add gphy mask to bcm63xx phy info struct and add data for bcm63268
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250814002530.5866-2-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These are present since commit d8652956cf37 ("net: dsa: realtek-smi: Add
Realtek SMI driver") and never needed. Apparently the driver was not
cleaned up sufficiently for submission.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250813181023.808528-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Netfilter and IPsec.
Current release - regressions:
- netfilter: nft_set_pipapo:
- don't return bogus extension pointer
- fix null deref for empty set
Current release - new code bugs:
- core: prevent deadlocks when enabling NAPIs with mixed kthread
config
- eth: netdevsim: Fix wild pointer access in nsim_queue_free().
Previous releases - regressions:
- page_pool: allow enabling recycling late, fix false positive
warning
- sched: ets: use old 'nbands' while purging unused classes
- xfrm:
- restore GSO for SW crypto
- bring back device check in validate_xmit_xfrm
- tls: handle data disappearing from under the TLS ULP
- ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
- eth:
- bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
- hv_netvsc: fix panic during namespace deletion with VF
Previous releases - always broken:
- netfilter: fix refcount leak on table dump
- vsock: do not allow binding to VMADDR_PORT_ANY
- sctp: linearize cloned gso packets in sctp_rcv
- eth:
- hibmcge: fix the division by zero issue
- microchip: fix KSZ8863 reset problem"
* tag 'net-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
net: usb: asix_devices: add phy_mask for ax88772 mdio bus
net: kcm: Fix race condition in kcm_unattach()
selftests: net/forwarding: test purge of active DWRR classes
net/sched: ets: use old 'nbands' while purging unused classes
bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
netdevsim: Fix wild pointer access in nsim_queue_free().
net: mctp: Fix bad kfree_skb in bind lookup test
netfilter: nf_tables: reject duplicate device on updates
ipvs: Fix estimator kthreads preferred affinity
netfilter: nft_set_pipapo: fix null deref for empty set
selftests: tls: test TCP stealing data from under the TLS socket
tls: handle data disappearing from under the TLS ULP
ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
ixgbe: prevent from unwanted interface name changes
devlink: let driver opt out of automatic phys_port_name generation
net: prevent deadlocks when enabling NAPIs with mixed kthread config
net: update NAPI threaded config even for disabled NAPIs
selftests: drv-net: don't assume device has only 2 queues
docs: Fix name for net.ipv4.udp_child_hash_entries
riscv: dts: thead: Add APB clocks for TH1520 GMACs
...
|
|
ksz8873_valid_regs[] was added for register access for KSZ8863/KSZ8873
switches, but the reset register is not in the list so
ksz8_reset_switch() does not take any effect.
Replace regmap_update_bits() using ksz_regmap_8 with ksz_rmw8() so that
an error message will be given if the register is not defined.
A side effect of not resetting the switch is the static MAC table is not
cleared. Further additions to the table will show write error as there
are only 8 entries in the table.
Fixes: d0dec3333040 ("net: dsa: microchip: Add register access control for KSZ8873 chip")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250807005453.8306-1-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
|
|
Merge in late fixes to prepare for the 6.17 net-next PR.
Conflicts:
net/core/neighbour.c
1bbb76a89948 ("neighbour: Fix null-ptr-deref in neigh_flush_dev().")
13a936bb99fb ("neighbour: Protect tbl->phash_buckets[] with a dedicated mutex.")
03dc03fa0432 ("neighbor: Add NTF_EXT_VALIDATED flag for externally validated entries")
Adjacent changes:
drivers/net/usb/usbnet.c
0d9cfc9b8cb1 ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event")
2c04d279e857 ("net: usb: Convert tasklet API to new bottom half workqueue mechanism")
net/ipv6/route.c
31d7d67ba127 ("ipv6: annotate data-races around rt->fib6_nsiblings")
1caf27297215 ("ipv6: adopt dst_dev() helper")
3b3ccf9ed05e ("net: Remove unnecessary NULL check for lwtunnel_fill_encap()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PTP function of KSZ8463 is on by default. However, its proprietary
way of storing timestamp directly in a reserved field inside the PTP
message header is not suitable for use with the current Linux PTP stack
implementation. It is necessary to disable the PTP function to not
interfere the normal operation of the MAC.
Note the PTP driver for KSZ switches does not work for KSZ8463 and is not
activated for it.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-7-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The fiber ports in KSZ8463 cannot be detected internally, so it requires
specifying that condition in the device tree. Like the one used in
Micrel PHY the port link can only be read and there is no write to the
PHY. The driver programs registers to operate fiber ports correctly.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-6-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ8463 uses 16-bit register definitions so it writes differently for
8-bit switch MAC address.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-5-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ8463 does not use same set of registers as KSZ8863 so it is necessary
to change some registers when using KSZ8463.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-4-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ8463 switch is a 3-port switch based from KSZ8863. Its major
difference from other KSZ SPI switches is its register access is not a
simple continual 8-bit transfer with automatic address increase but uses
a byte-enable mechanism specifying 8-bit, 16-bit, or 32-bit access. Its
registers are also defined in 16-bit format because it shares a design
with a MAC controller using 16-bit access. As a result some common
register accesses need to be re-arranged.
This patch adds the basic structure for using KSZ8463. It cannot use the
same regmap table for other KSZ switches as it interprets the 16-bit
value as little-endian and its SPI commands are different.
KSZ8463 uses a byte-enable mechanism to specify 8-bit, 16-bit, and 32-bit
access. The register is first shifted right by 2 then left by 4. Extra
4 bits are added. If the access is 8-bit one of the 4 bits is set. If
the access is 16-bit two of the 4 bits are set. If the access is 32-bit
all 4 bits are set. The SPI command for read or write is then added.
Because of this register transformation separate SPI read and write
functions are provided for KSZ8463.
KSZ8463's internal PHYs use standard PHY register definitions so there is
no need to remap things. However, the hardware has a bug that the high
word and low word of the PHY id are swapped. In addition the port
registers are arranged differently so KSZ8463 has its own mapping for
port registers and PHY registers. Therefore the PORT_CTRL_ADDR macro is
replaced with the get_port_addr helper function.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-3-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the phy enable/disable calls for b53 mmap, and
set the power down registers in the ephy control register
appropriately.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250724035300.20497-8-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add ephy register info for bcm6368.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250724035300.20497-7-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add ephy register info for bcm6318, which also applies to
bcm6328 and bcm6362.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250724035300.20497-6-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On bcm63xx SoCs there are registers that control the PHYs in
the GPIO controller. Allow the b53 driver to access them
by passing in the syscon through the device tree.
Add a structure to describe the ephy control register
and add register info for bcm63268.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250724035300.20497-5-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add defines for bcm6318, bcm6328, bcm6362, bcm6368 chip IDs,
update tables and switch init.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250724035300.20497-4-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add phy enable/disable to b53 ops to be called when
enabling/disabling ports.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250724035300.20497-2-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When KSZ8863 support was first added to KSZ driver the RX drop MIB
counter was somehow defined as 0x105. The TX drop MIB counter
starts at 0x100 for port 1, 0x101 for port 2, and 0x102 for port 3, so
the RX drop MIB counter should start at 0x103 for port 1, 0x104 for
port 2, and 0x105 for port 3.
There are 5 ports for KSZ8895, so its RX drop MIB counter starts at
0x105.
Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250723030403.56878-1-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'struct regmap_config' are not modified in these drivers. They be
statically defined instead of allocated and populated at run-time.
The main benefits are:
- it saves some memory at runtime
- the structures can be declared as 'const', which is always better for
structures that hold some function pointers
- the code is less verbose
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The remove function has these in the wrong order. The switch should be
unregistered last. Simpler to use devm so that the right thing is done.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20250708014144.2514-3-rosenp@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There's no architecture specific requirement for it to compile. Allows
the bots to test compilation properly.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250708014144.2514-2-rosenp@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
hellcreek_fdb_entry
'struct devlink_region_ops' and 'struct hellcreek_fdb_entry' are not
modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
55320 19216 320 74856 12468 drivers/net/dsa/hirschmann/hellcreek.o
After:
=====
text data bss dec hex filename
55960 18576 320 74856 12468 drivers/net/dsa/hirschmann/hellcreek.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://patch.msgid.link/2f7e8dc30db18bade94999ac7ce79f333342e979.1751231174.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use kcalloc() instead of hand writing it. This is less verbose.
Also move the initialization of 'count' to save some LoC.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
18652 5920 64 24636 603c drivers/net/dsa/mv88e6xxx/devlink.o
After:
=====
text data bss dec hex filename
18498 5920 64 24482 5fa2 drivers/net/dsa/mv88e6xxx/devlink.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/2f4fca4ff84950da71e007c9169f18a0272476f3.1751200453.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mv88e6xxx_region
'struct devlink_region_ops' and 'struct mv88e6xxx_region' are not modified
in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
18076 6496 64 24636 603c drivers/net/dsa/mv88e6xxx/devlink.o
After:
=====
text data bss dec hex filename
18652 5920 64 24636 603c drivers/net/dsa/mv88e6xxx/devlink.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/46040062161dda211580002f950a6d60433243dc.1751200453.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In both the read callback for struct cyclecounter, and in struct
timecounter, struct cyclecounter is declared as a const pointer.
Unfortunatly, a number of users of this pointer treat it as a non-const
pointer as it is burried in a larger structure that is heavily modified by
the callback function when accessed. This lie had been hidden by the fact
that container_of() "casts away" a const attribute of a pointer without any
compiler warning happening at all.
Fix this all up by removing the const attribute in the needed places so
that everyone can see that the structure really isn't const, but can,
and is, modified by the users of it.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/2025070124-backyard-hurt-783a@gregkh
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250616-gpiochip-set-rv-net-v2-2-cae0b182a552@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250616-gpiochip-set-rv-net-v2-1-cae0b182a552@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the datasheet, BCM5325 uses B53_PD_MODE_CTRL_25 register to
disable clocking to individual PHYs.
Only ports 1-4 can be enabled or disabled and the datasheet is explicit
about not toggling BIT(0) since it disables the PLL power and the switch.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250614080000.1884236-15-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
CPU port should be B53_CPU_PORT instead of B53_CPU_PORT_25 for
B53_PVLAN_PORT_MASK register.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-14-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement UC_FLOOD_MASK, MC_FLOOD_MASK and IPMC_FLOOD_MASK
registers.
This has to be handled differently with other pages and registers.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250614080000.1884236-13-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement GMII_PORT_OVERRIDE_CTRL register so we should
avoid reading or writing it.
PORT_OVERRIDE_RX_FLOW and PORT_OVERRIDE_TX_FLOW aren't defined on BCM5325
and we should use PORT_OVERRIDE_LP_FLOW_25 instead.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-12-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Older switches don't implement BRCM_HDR register so we should avoid
reading or writing it.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-11-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement DIS_LEARNING register so we should avoid reading
or writing it.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-10-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement B53_UC_FWD_EN, B53_MC_FWD_EN or B53_IPMC_FWD_EN.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-9-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement SWITCH_CTRL register so we should avoid reading
or writing it.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-8-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement FAST_AGE registers so we should avoid reading or
writing them.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250614080000.1884236-7-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 and BCM5365 are part of a much older generation of switches which,
due to their limited number of ports and VLAN entries (up to 256) allowed
a single 64-bit register to hold a full ARL entry.
This requires a little bit of massaging when reading, writing and
converting ARL entries in both directions.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-6-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need to be able to differentiate the BCM5325 variants because:
- BCM5325M switches lack the ARLIO_PAGE->VLAN_ID_IDX register.
- BCM5325E have less 512 ARL buckets instead of 1024.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250614080000.1884236-5-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 46c5176c586c ("net: dsa: b53: support legacy tags") introduced
support for legacy tags, but it turns out that BCM5325 and BCM5365
switches require the original FCS value and length, so they have to be
treated differently.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-4-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
irq_domain_create_simple() takes fwnode as the first argument. It can be
extracted from the struct device using dev_fwnode() helper instead of
using of_node with of_fwnode_handle().
So use the dev_fwnode() helper.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20250611104348.192092-15-jirislaby@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and wireless.
Current release - regressions:
- af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD
Current release - new code bugs:
- eth: airoha: correct enable mask for RX queues 16-31
- veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
disappears under traffic
- ipv6: move fib6_config_validate() to ip6_route_add(), prevent
invalid routes
Previous releases - regressions:
- phy: phy_caps: don't skip better duplex match on non-exact match
- dsa: b53: fix untagged traffic sent via cpu tagged with VID 0
- Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused
transient packet loss, exact reason not fully understood, yet
Previous releases - always broken:
- net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)
- sched: sfq: fix a potential crash on gso_skb handling
- Bluetooth: intel: improve rx buffer posting to avoid causing issues
in the firmware
- eth: intel: i40e: make reset handling robust against multiple
requests
- eth: mlx5: ensure FW pages are always allocated on the local NUMA
node, even when device is configure to 'serve' another node
- wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
prevent kernel crashes
- wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
for 3 sec if fw_stats_done is not set"
* tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context
net: ethtool: Don't check if RSS context exists in case of context 0
af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD.
ipv6: Move fib6_config_validate() to ip6_route_add().
net: drv: netdevsim: don't napi_complete() from netpoll
net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get()
veth: prevent NULL pointer dereference in veth_xdp_rcv
net_sched: remove qdisc_tree_flush_backlog()
net_sched: ets: fix a race in ets_qdisc_change()
net_sched: tbf: fix a race in tbf_change()
net_sched: red: fix a race in __red_change()
net_sched: prio: fix a race in prio_tune()
net_sched: sch_sfq: reject invalid perturb period
net: phy: phy_caps: Don't skip better duplex macth on non-exact match
MAINTAINERS: Update Kuniyuki Iwashima's email address.
selftests: net: add test case for NAT46 looping back dst
net: clear the dst when changing skb protocol
net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper
net/mlx5e: Fix leak of Geneve TLV option object
net/mlx5: HWS, make sure the uplink is the last destination
...
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
When Linux sends out untagged traffic from a port, it will enter the CPU
port without any VLAN tag, even if the port is a member of a vlan
filtering bridge with a PVID egress untagged VLAN.
This makes the CPU port's PVID take effect, and the PVID's VLAN
table entry controls if the packet will be tagged on egress.
Since commit 45e9d59d3950 ("net: dsa: b53: do not allow to configure
VLAN 0") we remove bridged ports from VLAN 0 when joining or leaving a
VLAN aware bridge. But we also clear the untagged bit, causing untagged
traffic from the controller to become tagged with VID 0 (and priority
0).
Fix this by not touching the untagged map of VLAN 0. Additionally,
always keep the CPU port as a member, as the untag map is only effective
as long as there is at least one member, and we would remove it when
bridging all ports and leaving no standalone ports.
Since Linux (and the switch) treats VLAN 0 tagged traffic like untagged,
the actual impact of this is rather low, but this also prevented earlier
detection of the issue.
Fixes: 45e9d59d3950 ("net: dsa: b53: do not allow to configure VLAN 0")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20250602194914.1011890-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to OpenMDK, bit 2 of the RGMII register has a different
meaning for BCM53115 [1]:
"DLL_IQQD 1: In the IDDQ mode, power is down0: Normal function
mode"
Configuring RGMII delay works without setting this bit, so let's keep it
at the default. For other chips, we always set it, so not clearing it
is not an issue.
One would assume BCM53118 works the same, but OpenMDK is not quite sure
what this bit actually means [2]:
"BYPASS_IMP_2NS_DEL #1: In the IDDQ mode, power is down#0: Normal
function mode1: Bypass dll65_2ns_del IP0: Use
dll65_2ns_del IP"
So lets keep setting it for now.
[1] https://github.com/Broadcom-Network-Switching-Software/OpenMDK/blob/master/cdk/PKG/chip/bcm53115/bcm53115_a0_defs.h#L19871
[2] https://github.com/Broadcom-Network-Switching-Software/OpenMDK/blob/master/cdk/PKG/chip/bcm53118/bcm53118_a0_defs.h#L14392
Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://patch.msgid.link/20250602193953.1010487-6-jonas.gorski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add RGMII to supported interfaces for BCM63xx RGMII ports so they can be
actually used in RGMII mode.
Without this, phylink will fail to configure them:
[ 3.580000] b53-switch 10700000.switch GbE3 (uninitialized): validation of rgmii with support 0000000,00000000,00000000,000062ff and advertisement 0000000,00000000,00000000,000062ff failed: -EINVAL
[ 3.600000] b53-switch 10700000.switch GbE3 (uninitialized): failed to connect to PHY: -EINVAL
[ 3.610000] b53-switch 10700000.switch GbE3 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 4
Fixes: ce3bf94871f7 ("net: dsa: b53: add support for BCM63xx RGMIIs")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://patch.msgid.link/20250602193953.1010487-5-jonas.gorski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The IMP port is not a valid RGMII interface, but hard wired to internal,
so we shouldn't touch the undefined register B53_RGMII_CTRL_IMP.
While this does not seem to have any side effects, let's not touch it at
all, so limit RGMII configuration on bcm63xx to the actual RGMII ports.
Fixes: ce3bf94871f7 ("net: dsa: b53: add support for BCM63xx RGMIIs")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250602193953.1010487-4-jonas.gorski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
bcm63xx's RGMII ports are always in MAC mode, never in PHY mode, so we
shouldn't enable any delays and let the PHY handle any delays as
necessary.
This fixes using RGMII ports with normal PHYs like BCM54612E, which will
handle the delay in the PHY.
Fixes: ce3bf94871f7 ("net: dsa: b53: add support for BCM63xx RGMIIs")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250602193953.1010487-3-jonas.gorski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
BCM63xx internal switches do not support EEE, but provide multiple RGMII
ports where external PHYs may be connected. If one of these PHYs are EEE
capable, we may try to enable EEE for the MACs, which then hangs the
system on access of the (non-existent) EEE registers.
Fix this by checking if the switch actually supports EEE before
attempting to configure it.
Fixes: 22256b0afb12 ("net: dsa: b53: Move EEE functions to b53")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://patch.msgid.link/20250602193953.1010487-2-jonas.gorski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
