aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/igc/igc_main.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-04-19igc: Remove IGC_MAC_STATE_QUEUE_STEERINGAndre Guedes1-13/+19
The IGC_MAC_STATE_QUEUE_STEERING bit in mac_table[i].state is utilized to indicate that frames matching the filter are assigned to mac_table[i].queue. This bit is not strictly necessary since we can convey the same information as follows: queue == -1 means queue assignment is disabled, otherwise it is enabled. In addition to make the code simpler, this change fixes some awkward situations where we pass a complete misleading 'queue' value such as in igc_uc_sync(). So this patch removes IGC_MAC_STATE_QUEUE_STEERING and also takes the opportunity to improve the igc_add_mac_filter documentation. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-19igc: Remove 'queue' check in igc_del_mac_filter()Andre Guedes1-14/+11
igc_add_mac_filter() doesn't allow us to have more than one entry with the same address and address type in adapter->mac_table so checking if 'queue' matches in igc_del_mac_filter() isn't necessary. This patch removes that check. This patch also takes the opportunity to improve the igc_del_mac_filter documentation and remove comment which is not applicable to this I225 controller. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-19igc: Improve address check in igc_del_mac_filter()Andre Guedes1-1/+1
igc_add_mac_filter() doesn't allow filters with invalid MAC address to be added to adapter->mac_table so, in igc_del_mac_filter(), we can early return if MAC address is invalid. No need to traverse the table. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-19igc: Refactor igc_rar_set_index()Andre Guedes1-31/+42
Current igc_rar_set_index() implementation is a bit convoluted so this patch does some code refactoring to improve it. The helper igc_rar_set_index() is about writing MAC filter settings into hardware registers. Logic such as address validation belongs to functions upper in the call chain such as igc_set_mac() and igc_add_mac_filter(). So this patch moves the is_valid_ether_addr() call to igc_add_mac_filter(). No need to touch igc_set_mac() since it already checks it. The variables 'rar_low' and 'rar_high' represent the value in registers RAL and RAH so we rename them to 'ral' and 'rah', respectively, to match the registers names. To make it explicit, filter settings are passed as arguments to the function instead of reading them from adapter->mac_table "under the hood". Also, the function was renamed to igc_set_mac_filter_hw to make it more clear what it does. Finally, the patch removes some wrfl() calls and comments not needed. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-19igc: Fix igc_uc_unsync()Andre Guedes1-3/+1
In case igc_del_mac_filter() returns error, that error is masked since the functions always return 0 (success). This patch fixes igc_uc_unsync() so it returns whatever value igc_del_mac_filter() returns (0 on success, negative number on error). Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-19igc: Change igc_add_mac_filter() returning valueAndre Guedes1-5/+2
In case of success, igc_add_mac_filter() returns the index in adapter->mac_table where the requested filter was added. This information, however, is not used by any caller of that function. In fact, callers have extra code just to handle this returning index as 0 (success). So this patch changes the function to return 0 on success instead, and cleans up the extra code. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-19igc: Check unsupported flag in igc_add_mac_filter()Andre Guedes1-0/+2
The IGC_MAC_STATE_SRC_ADDR flags is not supported by igc_add_mac_ filter() so this patch adds a check for it and returns -ENOTSUPP in case it is set. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-19igc: Remove duplicate code in MAC filtering logicAndre Guedes1-99/+13
This patch does a code refactoring in the MAC address filtering logic to get rid of some duplicate code. IGC driver has two functions to add MAC address filters that are pretty much the same: igc_add_mac_filter() and igc_add_mac_filter_flags(). The only difference is that the latter allows the callee to specify the 'flags' parameter while the former has it hard coded as zero. The same rationale applies to filter deletion counterparts. So this patch refactors igc_add_mac_filter() and igc_del_mac_filter() so they handle the 'flags' parameters, removes the _flags() functions, and fixes callees accordingly. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-19igc: Add new device IDs for i225 partSasha Neftin1-0/+3
Add new device IDs for the next step of i225 Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-17igc: Fix default MAC address filter overrideAndre Guedes1-0/+2
This patch fixes a bug when the user adds the first MAC address filter via ethtool NFC mechanism. When the first MAC address filter is added, it overwrites the default MAC address filter configured at RAL[0] and RAH[0]. As consequence, frames addressed to the interface MAC address are not sent to host anymore. This patch fixes the bug by calling igc_set_default_mac_filter() during adapter init so the position 0 of adapter->mac_table[] is assigned to the default MAC address. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-17igc: Remove dead code related to flower filterAndre Guedes1-3/+0
IGC driver has no support for tc-flower filters so this patch removes some leftover code, probably copied from IGB driver by mistake. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-17igc: Fix NFC queue redirection supportAndre Guedes1-3/+8
The support for ethtool Network Flow Classification (NFC) queue redirection based on destination MAC address is currently broken in IGC. For instance, if we add the following rule, matching frames aren't enqueued on the expected rx queue. $ ethtool -N IFNAME flow-type ether dst 3c:fd:fe:9e:7f:71 queue 2 The issue here is due to the fact that igc_rar_set_index() is missing code to enable the queue selection feature from Receive Address High (RAH) register. This patch adds the missing code and fixes the issue. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-17igc: Remove copper fiber switch controlSasha Neftin1-9/+0
i225 device support copper mode only PHY signal detect indication for copper fiber switch not applicable to i225 part Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-17igc: Enable NETIF_F_HW_TC flagSasha Neftin1-0/+1
This assignment of the feature NETIF_F_HW_TC occurs prior to the initial setup of the local hw_features variable. This ensures that NETIF_F_HW_TC are marked as user changeable, and also enables it by default when the driver loads. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-17igc: Add support for ETF offloadingVinicius Costa Gomes1-3/+67
This adds support for ETF offloading for the i225 controller. For i225, the LaunchTime feature is almost a subset of the Qbv feature. The main change from the i210 is that the launchtime of each packet is specified as an offset applied to the BASET register. BASET is automatically incremented each cycle. For i225, the approach chosen is to re-use most of the setup used for taprio offloading. With a few changes: - The more or less obvious one is that when ETF is enabled, we should set add the expected launchtime to the (advanced) transmit descriptor; - The less obvious, is that when taprio offloading is not enabled, we add a dummy schedule (all queues are open all the time, with a cycle time of 1 second). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-17igc: Add support for taprio offloadingVinicius Costa Gomes1-0/+113
Adds support for translating taprio schedules into i225 cycles. This will allow schedules to run in the hardware, making the schedules enforcement more precise and saving CPU time. Right now, the only simple schedules are allowed, complex schedules are rejected. "simple" in this context are schedules that each HW queue is opened and closed only once in each cycle. Changing schedules is still not supported as well. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-17igc: Add GSO partial supportSasha Neftin1-0/+10
Partial generic segmentation offload is a hybrid between TSO and GSO. What is effectively does is take advantage of certain traits of TCP and tunnels so that instead of having to rewrite the packet headers for each segment only in the inner-most transport header and possible the outer-most network header need to be updated. This allows devices that do not support tunnel offload or tunnels offloads with checksum to still make use of segmentation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19igc: Add WOL supportSasha Neftin1-0/+10
This patch adds a define and WOL support for an i225 parts. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19igc: Add pcie error handler supportSasha Neftin1-0/+103
Add pcie error detection, slot reset and resume capability Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19igc: Complete to commit Add basic skeleton for PTPSasha Neftin1-0/+2
commit 5f2958052c58 ("igc: Add basic skeleton for PTP") added basic support for PTP, what's missing is support for suspending. Legacy power management has been added. Now we can add the suspend method to the igc_shutdown. By cleaning the runtime storage for timestamp this avoids a possible invalid memory access when the system comes back from suspend state. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19igc: Add dump optionsSasha Neftin1-0/+2
Placeholder for debugging functionality. In this patch, we add some registers and rings summary dumps. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19igc: Complete to commit Add legacy power management supportSasha Neftin1-0/+27
commit 9513d2a5dc7f ("igc: Add legacy power management support") Add power management resume and schedule suspend requests. Add power management get and put synchronization. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-17igc: Add support for TSOSasha Neftin1-1/+112
TCP segmentation offload allows a device to segment a single frame into multiple frames with a data payload size specified in socket buffer. As a result we can now send data approximately up to seven percents fast than was previously possible on my system. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-17igc: Add SKU for i225 deviceSasha Neftin1-0/+1
Add support for blank NVM SKU Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-17igc: Fix typo in a commentSasha Neftin1-1/+1
Fix typo in a context descriptor comment Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-06igc: Add support for TX timestampingVinicius Costa Gomes1-0/+50
This adds support for timestamping packets being transmitted. Based on the code from i210. The basic differences is that i225 has 4 registers to store the transmit timestamps (i210 has one). Right now, we only support retrieving from one register, support for using the other registers will be added later. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-06igc: Add support for RX timestampingVinicius Costa Gomes1-0/+10
This adds support for timestamping received packets. It is based on the i210, as many features of i225 work the same way. The main difference from i210 is that i225 has support for choosing the timer register to use when timestamping packets. Right now, we only support using timer 0. The other difference is that i225 stores two timestamps in the receive descriptor, right now, we only retrieve one. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-06igc: Add basic skeleton for PTPVinicius Costa Gomes1-0/+27
This allows the creation of the /dev/ptpX device for i225, and reading and writing the time. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_sw_initSasha Neftin1-743/+740
We want to avoid forward-declarations of function if possible. Rearrange the igc_sw_init function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_write_itrSasha Neftin1-17/+16
We want to avoid forward-declarations of function if possible. Rearrange the igc_write_itr function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_assign_vectorSasha Neftin1-62/+61
We want to avoid forward-declarations of function if possible. Rearrange the igc_assign_vector function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_free_q_vectorSasha Neftin1-21/+20
We want to avoid forward-declarations of function if possible. Rearrange the igc_free_q_vector function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_free_q_vectorsSasha Neftin1-14/+13
We want to avoid forward-declarations of function if possible. Rearrange the igc_free_q_vectors function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_irq_disableSasha Neftin1-34/+33
We want to avoid forward-declarations of function if possible. Rearrange the igc_irq_disable function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_irq_enableSasha Neftin1-24/+23
We want to avoid forward-declarations of function if possible. Rearrange the igc_irq_enable function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_configure_msixSasha Neftin1-45/+44
We want to avoid forward-declarations of function if possible. Rearrange the igc_configure_msix function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_set_rx_modeSasha Neftin1-177/+176
We want to avoid forward-declarations of function if possible. Rearrange the igc_set_rx_mode function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_set_interrupt_capabilitySasha Neftin1-72/+70
We want to avoid forward-declarations of function if possible. Rearrange the igc_set_interrupt_capability function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_alloc_mapped_pageSasha Neftin1-48/+46
We want to avoid forward-declarations of function if possible. Rearrange the igc_alloc_mapped_page function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_configureSasha Neftin1-46/+45
We want to avoid forward-declarations of function if possible. Rearrange the igc_configure function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_set_default_mac_filterSasha Neftin1-46/+45
We want to avoid forward-declarations of function if possible. Rearrange the igc_set_default_mac_filter function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_power_down_linkSasha Neftin1-11/+10
We want to avoid forward-declarations of function if possible. Rearrange the igc_power_down_link function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_clean_tx_ringSasha Neftin1-38/+37
We want to avoid forward-declarations of function if possible. Rearrange the igc_clean_tx_ring function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Remove serdes comments from a description of methodsSasha Neftin1-2/+2
Serdes interface is not applicable for i225 devices. Remove this from comments and make comments more clearly. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Add legacy power management supportSasha Neftin1-0/+204
Add suspend, resume, runtime_suspend, runtime_resume and runtime_idle callbacks implementation. Reported-by: kbuild test robot <lpk@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Add 64 bit DMA access supportSasha Neftin1-0/+3
On relevant platforms ndo_start_xmit can handle socket buffer fragments in high memory Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Fix parameter descriptions for a several functionsSasha Neftin1-3/+7
igc_watchdog, igc_set_interrupt_capability, igc_init_interrupt_scheme, __igc_open and __igc_close parameter descriptions has not reflected functions meaning. Add meaningful description. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Fix the parameter description for igc_alloc_rx_buffersSasha Neftin1-1/+2
The function description for igc_alloc_rx_buffers has not reflected the function meaning. Add meaningful description. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Remove excess parameter description from igc_is_non_eopSasha Neftin1-1/+0
The function description for igc_is_non_eop includes an extra @skb parameter description. This parameter doesn't exist on the function, so remove it. Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Prefer to use the pci_release_mem_regions methodSasha Neftin1-2/+1
Use the pci_release_mem_regions method instead of the pci_release_selected_regions method Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-12-14 07:31:58 +0000