| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
During PERST# assertion tegra_pcie_bpmp_set_pll_state() is currently
called twice.
pex_ep_event_pex_rst_assert() should do the opposite of
pex_ep_event_pex_rst_deassert(), so it is obvious that the duplicate
tegra_pcie_bpmp_set_pll_state() is a mistake, and that the duplicate
tegra_pcie_bpmp_set_pll_state() call should instead be a call to
tegra_pcie_bpmp_set_ctrl_state().
With this, the uninitialization sequence also matches that of
tegra_pcie_unconfig_controller().
Fixes: a54e19073718 ("PCI: tegra194: Add Tegra234 PCIe support")
Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
[cassel: improve commit log]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250911093021.1454385-2-cassel@kernel.org
[mani: added Fixes tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
Add support for PCIe controller in Sophgo SG2042 SoC. The controller uses
the Cadence PCIe core programmed by pcie-cadence* common driver. The PCIe
controller in SG2042 works in host mode only, supporting data rate up to 16
GT/s and lanes up to x16 or x8.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
[mani: reworded description and minor code cleanups]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/01b0a57cd9dba8bed7c1f2d52997046c2c6f042b.1757643388.git.unicorn_wang@outlook.com
|
|
cdns_pcie::ops might not be populated by all the Cadence glue drivers. This
is going to be true for the upcoming Sophgo platform which doesn't set the
ops.
Hence, add a check to prevent NULL pointer dereference.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
[mani: reworded subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/35182ee1d972dfcd093a964e11205efcebbdc044.1757643388.git.unicorn_wang@outlook.com
|
|
DT binding allows specifying 'phy' and 'reset' properties in both host
bridge and Root Port nodes, though specifying in the host bridge node is
marked as deprecated. Still, the pcie-qcom driver should support both
combinations for maintaining the DT backwards compatibility. For this
purpose, the driver is holding the relevant pointers of these properties in
two structs: struct qcom_pcie_port and struct qcom_pcie.
However, this causes confusion and increases the driver complexity. Hence,
move the pointers from struct qcom_pcie to struct qcom_pcie_port. As a
result, even if these properties are specified in the host bridge node,
the pointers will be stored in struct qcom_pcie_port as if the properties
are specified in a single Root Port node. This logic simplifies the driver
a lot.
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250912-pci-pwrctrl-perst-v3-2-3c0ac62b032c@oss.qualcomm.com
|
|
dw_pcie_edma_irq_verify() already parses device tree for either "dma" (if
there is a single IRQ for all DMA channels) or "dmaX" (if there is one IRQ
per DMA channel), and initializes dma.nr_irqs accordingly.
Additionally, the probing of the eDMA driver will fail if neither "dma"
nor "dmaX" is defined in the device tree.
Therefore there is no need for a glue driver to specify edma.nr_irqs, so
remove the redundant edma.nr_irqs initialization.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: fix typos]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250908165914.547002-4-cassel@kernel.org
|
|
dw_pcie_edma_irq_verify() is supposed to verify the eDMA IRQs in devicetree
by fetching them using either 'dma' or 'dmaX' IRQ names. Former is used
when the platform uses a single IRQ for all eDMA channels and latter is
used when the platform uses separate IRQ per channel. But currently,
dw_pcie_edma_irq_verify() bails out early if edma::nr_irqs is 1, i.e., when
a single IRQ is used. This gives an impression that the driver could work
with any single IRQ in devicetree, not necessarily with name 'dma'.
But dw_pcie_edma_irq_vector(), which actually requests the IRQ, does
require the single IRQ to be named as 'dma'. So this creates inconsistency
between dw_pcie_edma_irq_verify() and dw_pcie_edma_irq_vector().
Thus, to fix this inconsistency, make sure dw_pcie_edma_irq_verify() also
verifies the single IRQ name by removing the bail out code.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[mani: reworded subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: fix typos]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250908165914.547002-3-cassel@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Fix mvebu PCI enumeration regression caused by converting to
for_each_of_range() iterator (Klaus Kudielka)
* tag 'pci-v6.17-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: mvebu: Fix use of for_each_of_range() iterator
|
|
5da3d94a23c6 ("PCI: mvebu: Use for_each_of_range() iterator for parsing
"ranges"") simplified code by using the for_each_of_range() iterator, but
it broke PCI enumeration on Turris Omnia (and probably other mvebu
targets).
Issue #1:
To determine range.flags, of_pci_range_parser_one() uses bus->get_flags(),
which resolves to of_bus_pci_get_flags(), which already returns an
IORESOURCE bit field, and NOT the original flags from the "ranges"
resource.
Then mvebu_get_tgt_attr() attempts the very same conversion again. Remove
the misinterpretation of range.flags in mvebu_get_tgt_attr(), to restore
the intended behavior.
Issue #2:
The driver needs target and attributes, which are encoded in the raw
address values of the "/soc/pcie/ranges" resource. According to
of_pci_range_parser_one(), the raw values are stored in range.bus_addr and
range.parent_bus_addr, respectively. range.cpu_addr is a translated version
of range.parent_bus_addr, and not relevant here.
Use the correct range structure member, to extract target and attributes.
This restores the intended behavior.
Fixes: 5da3d94a23c6 ("PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"")
Reported-by: Jan Palus <jpalus@fastmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220479
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Tony Dinh <mibodhi@gmail.com>
Tested-by: Jan Palus <jpalus@fastmail.com>
Link: https://patch.msgid.link/20250907102303.29735-1-klaus.kudielka@gmail.com
|
|
The Cadence PCIe Controller integrated in the TI K3 SoCs supports both
Root-Complex and Endpoint modes of operation. The Glue Layer allows
"strapping" the Mode of operation of the Controller, the Link Speed
and the Link Width. This is enabled by programming the "PCIEn_CTRL"
register (n corresponds to the PCIe instance) within the CTRL_MMR
memory-mapped register space. The "reset-values" of the registers are
also different depending on the mode of operation.
Since the PCIe Controller latches onto the "reset-values" immediately
after being powered on, if the Glue Layer configuration is not done while
the PCIe Controller is off, it will result in the PCIe Controller latching
onto the wrong "reset-values". In practice, this will show up as a wrong
representation of the PCIe Controller's capability structures in the PCIe
Configuration Space. Some such capabilities which are supported by the PCIe
Controller in the Root-Complex mode but are incorrectly latched onto as
being unsupported are:
- Link Bandwidth Notification
- Alternate Routing ID (ARI) Forwarding Support
- Next capability offset within Advanced Error Reporting (AER) capability
Fix this by powering off the PCIe Controller before programming the "strap"
settings and powering it on after that. The runtime PM APIs namely
pm_runtime_put_sync() and pm_runtime_get_sync() will decrement and
increment the usage counter respectively, causing GENPD to power off and
power on the PCIe Controller.
Fixes: f3e25911a430 ("PCI: j721e: Add TI J721E PCIe driver")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250908120828.1471776-1-s-vadapalli@ti.com
|
|
The dev_err_probe() doesn't do anything when error is '-ENOMEM'.
Therefore, remove the useless call to dev_err_probe(), and just
return the value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
[mani: reworded the subject]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
The 'info' parameter of hv_msi_free() is unused. Delete it.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
|
|
When the 3.3Vaux supply is present, fetch it at the probe time and keep it
enabled for the entire PCIe controller lifecycle so that the link can enter
L2 state and the devices can signal wakeup using either Beacon or WAKE#
mechanisms.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: reworded the subject, description and error message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250820022328.2143374-1-hongxing.zhu@nxp.com
|
|
Correct a typo in the macro names GEN3_EQ_FMDC_MAX_PRE_CURSOR_DELTA and
GEN3_EQ_FMDC_MAX_POST_CURSOR_DELTA.
Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com>
[mani: reworded description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20250904065225.1762793-3-ziyue.zhang@oss.qualcomm.com
|
|
Add lane equalization setting for 8.0 GT/s and 32.0 GT/s to enhance link
stability and avoid AER Correctable Errors reported on some platforms
(eg. SA8775P).
8.0 GT/s, 16.0 GT/s and 32.0 GT/s require the same equalization setting.
This setting is programmed into a group of shadow registers, which can be
switched to configure equalization for different speeds by writing 00b,
01b and 10b to `RATE_SHADOW_SEL`.
Hence, program equalization registers in a loop using link speed as index,
so that equalization setting can be programmed for 8.0 GT/s, 16.0 GT/s
and 32.0 GT/s.
Fixes: 489f14be0e0a ("arm64: dts: qcom: sa8775p: Add pcie0 and pcie1 nodes")
Co-developed-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com>
[mani: wrapped the warning to fit 100 columns, used post-increment for loop]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250904065225.1762793-2-ziyue.zhang@oss.qualcomm.com
|
|
Fix incorrect argument order in devm_kcalloc() when allocating port->phys.
The original call used sizeof(phy) as the number of elements and
port->lanes as the element size, which is reversed. While this happens to
produce the correct total allocation size with current pointer size and
lane counts, the argument order is wrong.
Fixes: 6fe7c187e026 ("PCI: tegra: Support per-lane PHYs")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
[mani: added Fixes tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250819150436.3105973-1-alok.a.tiwari@oracle.com
|
|
The era of hand-rolled HIWORD_UPDATE macros is over.
Like many other Rockchip drivers, pcie-dw-rockchip brings with it its
very own flavour of HIWORD_UPDATE. It's occasionally used without a
constant mask, which complicates matters. HIWORD_UPDATE_BIT is a
confusingly named addition, as it doesn't update the bit, it actually
sets all bits in the value to 1. HIWORD_DISABLE_BIT is similarly
confusing; it disables several bits at once by using the value as a mask
and the inverse of value as the value, and the "disabling only these"
effect comes from the hardware actually using the mask. The more obvious
approach would've been HIWORD_UPDATE(val, 0) in my opinion.
This is part of the motivation why this patch uses hw_bitfield.h's
FIELD_PREP_WM16 instead, where possible. FIELD_PREP_WM16 requires a
constant bit mask, which isn't possible where the irq number is used to
generate a bit mask. For that purpose, we replace it with a more robust
macro than what was there but that should also bring close to zero
runtime overhead: we actually mask the IRQ number to make sure we're not
writing garbage.
For the remaining bits, there also are some caveats. For starters, the
PCIE_CLIENT_ENABLE_LTSSM and PCIE_CLIENT_DISABLE_LTSSM were named in a
manner that isn't quite truthful to what they do. Their modification
actually spans not just the LTSSM bit but also another bit, flipping
only the LTSSM one, but keeping the other (which according to the TRM
has a reset value of 0) always enabled. This other bit is reserved as of
the IP version RK3588 uses at least, and I have my doubts as to whether
it was meant to be set, and whether it was meant to be set in that code
path. Either way, it's confusing.
Replace it with just writing either 1 or 0 to the LTSSM bit, using the
new FIELD_PREP_WM16 macro from hw_bitfield.h, which grants us the
benefit of better compile-time error checking.
The change of no longer setting the reserved bit doesn't appear to
change the behaviour on RK3568 in RC mode, where it's not marked as
reserved.
PCIE_CLIENT_RC_MODE/PCIE_CLIENT_EP_MODE was another field that wasn't
super clear on what the bit field modification actually is. As far as I
can tell, switching to RC mode doesn't actually write the correct value
to the field if any of its bits have been set previously, as it only
updates one bit of a 4 bit field.
Replace it by actually writing the full values to the field, using the
new FIELD_PREP_WM16 macro, which grants us the benefit of better
compile-time error checking.
This patch was tested on RK3588 (PCIe3 x4 controller), RK3576 (PCIe2 x1
controller) and RK3568 (PCIe x2 controller), all in RC mode.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
|
The era of hand-rolled HIWORD_UPDATE macros is over, at least for those
drivers that use constant masks.
The Rockchip PCI driver, like many other Rockchip drivers, has its very
own definition of HIWORD_UPDATE.
Remove it, and replace its usage with either FIELD_PREP_WM16, or two new
header local macros for setting/clearing a bit with the high mask, which
use FIELD_PREP_WM16_CONST internally. In the process, ENCODE_LANES
needed to be adjusted, as FIELD_PREP_WM16* shifts the value for us.
That this is equivalent was verified by first making all FIELD_PREP_WM16
instances FIELD_PREP_WM16_CONST, then doing a static_assert() comparing
it to the old macro (and for those with parameters, static_asserting for
the full range of possible values with the old encode macro).
What we get out of this is compile time error checking to make sure the
value actually fits in the mask, and that the mask fits in the register,
and also generally less icky code that writes shifted values when it
actually just meant to set and clear a handful of bits.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
|
Commit a2790bf81f0f ("PCI: j721e: Add support to build as a loadable
module") added support to build the driver as a loadable module. However,
it did not add MODULE_DEVICE_TABLE() which is required for autoloading the
driver based on device table when it is built as a loadable module.
Fix it by adding MODULE_DEVICE_TABLE.
Fixes: a2790bf81f0f ("PCI: j721e: Add support to build as a loadable module")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
[mani: reworded description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250901120359.3410774-1-s-vadapalli@ti.com
|
|
The qcom_pcie_parse_ports() function currently iterates over all available
child nodes of the PCIe controller's device tree node. This includes
unrelated nodes such as OPP (Operating Performance Points) nodes, which do
not contain the expected 'reset' and 'phy' properties. As a result, parsing
fails and the driver falls back to the legacy method of parsing the
controller node directly. However, this fallback also fails when properties
are shifted to the Root Port node, leading to probe failure.
Fix this by restricting the parsing logic to only consider child nodes with
device_type = "pci", which is the expected and required property for PCIe
bridge nodes as per the pci-bus-common.yaml dtschema.
Fixes: a2fbecdbbb9d ("PCI: qcom: Add support for parsing the new Root Port binding")
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: reworded subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250826-pakala-v3-3-721627bd5bb0@oss.qualcomm.com
|
|
Replace calls of devm_kzalloc() with devm_kcalloc() in ks_pcie_probe().
As noted in the kernel documentation [1], open-coded multiplication in
allocator arguments is discouraged because it can lead to integer
overflow.
Using devm_kcalloc() provides built-in overflow protection, making the
memory allocation safer when calculating the allocation size compared
to explicit multiplication.
[1]: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20250819131235.152967-1-rongqianfeng@vivo.com
|
|
Starting with commit dd26c1a23fd5 ("PCI: rcar-host: Switch to
msi_create_parent_irq_domain()"), the MSI parent IRQ domain is NULL because
the object of type struct irq_domain_info passed to:
msi_create_parent_irq_domain() ->
irq_domain_instantiate()() ->
__irq_domain_instantiate()
has no reference to the parent IRQ domain. Using msi->domain->parent as an
argument for generic_handle_domain_irq() leads to below error:
"Unable to handle kernel NULL pointer dereference at virtual address"
This error was identified while switching the upcoming RZ/G3S PCIe host
controller driver to msi_create_parent_irq_domain() (which was using a
similar pattern to handle MSIs (see link section)), but it was not tested
on hardware using the pcie-rcar-host controller driver due to lack of
hardware.
Fixes: dd26c1a23fd5 ("PCI: rcar-host: Switch to msi_create_parent_irq_domain()")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
[mani: reworded subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/all/20250704161410.3931884-6-claudiu.beznea.uj@bp.renesas.com
Link: https://patch.msgid.link/20250809144447.3939284-1-claudiu.beznea.uj@bp.renesas.com
|
|
The PCI capability/extended capability offsets are not guaranteed to be the
same across all SoCs integrating the Cadence PCIe IP.
Use the cdns_pcie_find_{ext}_capability() APIs to find the capabilities,
which avoids hardcoding the offsets in the driver.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250813144529.303548-7-18255117159@163.com
|
|
The PCI core now provides generic PCI_FIND_NEXT_CAP() and
PCI_FIND_NEXT_EXT_CAP() macros to search for PCI capabilities, using
config accessors we supply.
Use them in the CDNS driver to add cdns_pcie_find_capability() and
cdns_pcie_find_ext_capability() interfaces.
Signed-off-by: Hans Zhang <18255117159@163.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250813144529.303548-6-18255117159@163.com
|
|
The PCI core now provides generic PCI_FIND_NEXT_CAP() macros to search for
PCI capabilities, using config accessors we supply.
Use them in the DWC EP driver to implement dw_pcie_ep_find_capability()
instead of duplicating the algorithm.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250819145828.438541-1-18255117159@163.com
|
|
Introduce support for the PCI-Express Gen3 controller found in the
MT8196 (and MT6991) SoC by adding a compatible string and platform
specific data.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250703120847.121826-4-angelogioacchino.delregno@collabora.com
|
|
In preparation to add support for the PCI-Express Gen3 controller
found in newer MediaTek SoCs, such as the Dimensity 9400 MT6991
and the MT8196 Chromebook SoC, add the definition for the PCIE
Resource Control register and a new sys_clk_rdy_time_us variable
in platform data.
If sys_clk_rdy_time_us is found (> 0), set the new value in the
aforementioned register only after configuring the controller to
RC mode, as this may otherwise be reset.
Overriding the register defaults for SYS_CLK_RDY_TIME allows to
work around sys_clk_rdy signal glitching in MT6991 and MT8196.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[mani: used FIELD_MODIFY() to simplify mask and update]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250703120847.121826-2-angelogioacchino.delregno@collabora.com
|
|
The PCI core now provides generic PCI_FIND_NEXT_CAP() and
PCI_FIND_NEXT_EXT_CAP() macros to search for PCI capabilities, using
config accessors we supply.
Use them in the DWC driver to implement dw_pcie_find_capability() and
dw_pcie_find_ext_capability() instead of duplicating the algorithm.
Signed-off-by: Hans Zhang <18255117159@163.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250813144529.303548-5-18255117159@163.com
|
|
struct pci_epc_features has static storage duration, so all struct members
are zero initialized implicitly. Thus, remove explicit zero initialization
for features that are *not* supported so we don't have to touch existing
drivers as new features are added.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[bhelgaas: squash together, expand commit log rationale]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> #rcar-ep, rcar-gen4
Link: https://patch.msgid.link/20250814152119.1562063-16-cassel@kernel.org
Link: https://patch.msgid.link/20250814152119.1562063-17-cassel@kernel.org
Link: https://patch.msgid.link/20250814152119.1562063-18-cassel@kernel.org
Link: https://patch.msgid.link/20250814152119.1562063-19-cassel@kernel.org
Link: https://patch.msgid.link/20250814152119.1562063-20-cassel@kernel.org
Link: https://patch.msgid.link/20250814152119.1562063-21-cassel@kernel.org
Link: https://patch.msgid.link/20250814152119.1562063-22-cassel@kernel.org
Link: https://patch.msgid.link/20250814152119.1562063-23-cassel@kernel.org
Link: https://patch.msgid.link/20250814152119.1562063-24-cassel@kernel.org
Link: https://patch.msgid.link/20250814152119.1562063-25-cassel@kernel.org
Link: https://patch.msgid.link/20250814152119.1562063-26-cassel@kernel.org
Link: https://patch.msgid.link/20250814152119.1562063-27-cassel@kernel.org
Link: https://patch.msgid.link/20250814152119.1562063-28-cassel@kernel.org
|
|
d7d8ab87e3e7 ("PCI: vmd: Switch to msi_create_parent_irq_domain()") added a
WARN_ON sanity check that child devices support MSI-X, because VMD document
says [1]:
Intel VMD only supports MSIx Interrupts from child devices and therefore
the BIOS must enable PCIe Hot Plug and MSIx interrups [sic].
However, the VMD device can't even tell the difference between a child
device using MSI and one using MSI-X. Per 185a383ada2e ("x86/PCI: Add
driver for Intel Volume Management Device (VMD)"), VMD does not support
INTx interrupts, but does support child devices using either MSI or MSI-X.
Remove the sanity check to avoid the WARN_ON and allow child devices to use
MSI, reported by Ammar.
Fixes: d7d8ab87e3e7 ("PCI: vmd: Switch to msi_create_parent_irq_domain()")
Link: https://cdrdv2-public.intel.com/776857/VMD_White_Paper.pdf [1]
Reported-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Closes: https://lore.kernel.org/linux-pci/aJXYhfc%2F6DfcqfqF@linux.gnuweeb.org/
Signed-off-by: Nam Cao <namcao@linutronix.de>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Link: https://patch.msgid.link/20250811053935.4049211-1-namcao@linutronix.de
|
|
f29861aa301c5 ("PCI: xilinx: Switch to msi_create_parent_irq_domain()")
changed xilinx_pcie::msi_domain from child devices' interrupt domain to
Xilinx AXI bridge's interrupt domain.
However, xilinx_pcie_intr_handler() wasn't changed and still reads Xilinx
AXI bridge's interrupt domain from xilinx_pcie::msi_domain->parent. This
pointer is NULL now.
Update xilinx_pcie_intr_handler() to read the correct interrupt domain
pointer.
Fixes: f29861aa301c5 ("PCI: xilinx: Switch to msi_create_parent_irq_domain()")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250811054144.4049448-1-namcao@linutronix.de
|
|
There is a typo so we accidentally return positive EINVAL instead of
negative -EINVAL. Add the missing '-' character.
Fixes: 6aceb36f17ab ("PCI: xgene-msi: Restructure handler setup/teardown")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://patch.msgid.link/aIzCbVd93ivPinne@stanley.mountain
|
|
Add support for handling the AMD Versal Gen 2 MDB PCIe Root Port PERST#
signal via a GPIO by parsing the new PCIe bridge node to acquire the
reset GPIO. If the bridge node is not found, fall back to acquiring it
from the PCIe host bridge node.
As part of this, update the interrupt controller node parsing to use
of_get_child_by_name() instead of of_get_next_child(), since the PCIe
host bridge node now has multiple children. This ensures the correct
node is selected during initialization.
Signed-off-by: Sai Krishna Musham <sai.krishna.musham@amd.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250807074019.811672-3-sai.krishna.musham@amd.com
|
|
R-Car V4H Reference Manual R19UH0186EJ0130 Rev.1.30 Apr. 21, 2025 page 4581
Figure 104.3b Initial Setting of PCIEC(example), middle of the figure
indicates that fourth write into register 0x148 [2:0] is 0x3 or
GENMASK(1, 0). The current code writes GENMASK(11, 0) which is a typo. Fix
the typo.
Fixes: faf5a975ee3b ("PCI: rcar-gen4: Add support for R-Car V4H")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250806192548.133140-1-marek.vasut+renesas@mailbox.org
|
|
Select the pwrctrl driver, which is utilized to manage the power supplies
of the devices connected to the standard PCI slots conforming to
specification like PCIe CEM. This ensures that the voltage rails of the
standard PCI slots on some platforms eg. X1E80100-QCP can be correctly
turned on/off if they are described in PCIe Root Port device tree node.
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Wenbin Yao <quic_wenbyao@quicinc.com>
[mani: reworded subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250722091151.1423332-2-quic_wenbyao@quicinc.com
|
|
vmd_msi_alloc() allocates struct vmd_irq and stashes it into
irq_data->chip_data associated with the VMD's interrupt domain.
vmd_msi_free() extracts the pointer by calling irq_get_chip_data() and
frees it.
irq_get_chip_data() returns the chip_data associated with the top interrupt
domain. This worked in the past because VMD's interrupt domain was the top
domain.
But d7d8ab87e3e7 ("PCI: vmd: Switch to msi_create_parent_irq_domain()")
changed the interrupt domain hierarchy so VMD's interrupt domain is not the
top domain anymore. irq_get_chip_data() now returns the chip_data at the
MSI devices' interrupt domains. It is therefore broken for vmd_msi_free()
to kfree() this chip_data.
Fix by extracting the chip_data associated with the VMD's interrupt domain.
Fixes: d7d8ab87e3e7 ("PCI: vmd: Switch to msi_create_parent_irq_domain()")
Reported-by: Kenneth Crudup <kenny@panix.com>
Closes: https://lore.kernel.org/linux-pci/dfa40e48-8840-4e61-9fda-25cdb3ad81c1@panix.com/
Reported-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Closes: https://lore.kernel.org/linux-pci/ed53280ed15d1140700b96cca2734bf327ee92539e5eb68e80f5bbbf0f01@linux.gnuweeb.org/
Tested-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Tested-by: Kenneth Crudup <kenny@panix.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250807081051.2253962-1-namcao@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Allow built-in drivers, not just modular drivers, to use async
initial probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability
(Sean Christopherson)
- Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
required delay between a reset and sending config requests to a
device (Niklas Cassel)
- Add pci_is_display() to check for "Display" base class and use it
in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)
- Allow 'isolated PCI functions' (multi-function devices without a
function 0) for LoongArch, similar to s390 and jailhouse (Huacai
Chen)
Power control:
- Add ability to enable optional slot clock for cases where the PCIe
host controller and the slot are supplied by different clocks
(Marek Vasut)
PCIe native device hotplug:
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been
removed (Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the
slot is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
ports (Lukas Wunner)
Virtualization:
- Save VF resizable BAR state and restore it after reset (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
(Michał Winiarski)
Endpoint framework:
- Add RC-to-EP doorbell support using platform MSI controller,
including a test case (Frank Li)
- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)
Native PCIe controller drivers:
- Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
DT schema format (Rob Herring)
- Use dev_fwnode() instead of of_fwnode_handle() to remove OF
dependency in altera (fixes an unused variable), designware-host,
mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
xilinx-nwl (Jiri Slaby, Arnd Bergmann)
- Convert aardvark, altera, brcmstb, designware-host, iproc,
mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
using msi_create_parent_irq_domain() instead; this makes the
interrupt controller per-PCI device, allows dynamic allocation of
vectors after initialization, and allows support of IMS (Nam Cao)
APM X-Gene PCIe controller driver:
- Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
bits, use device-managed memory allocations, and clean things up
(Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Add optional DT 'num-lanes' property and if present, use it to
override the Maximum Link Width advertised in Link Capabilities
(Jim Quinlan)
Cadence PCIe controller driver:
- Use PCIe Message routing types from the PCI core rather than
defining private ones (Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
(Richard Zhu)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
trigger doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from
imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard
Zhu)
Intel VMD host bridge driver:
- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)
Qualcomm PCIe controller driver:
- Add DT binding and driver support for SA8255p, which supports ECAM
for Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port
resets in a Root Port stanza and deprecate describing them in the
host bridge; this makes it possible to support multiple Root Ports
in the future (Krishna Chaitanya Chundru)
- Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)
- Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)
- Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
bindings (Konrad Dybcio)
- Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
Zhang)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Rockchip PCIe controller driver:
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a
chance to train at a higher speed (Geraldo Nascimento)
Rockchip DesignWare PCIe controller driver:
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred
Mallawa)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Sophgo PCIe controller driver:
- Add DT binding and driver for Sophgo SG2044 PCIe controller driver
in Root Complex mode (Inochi Amaoto)
Synopsys DesignWare PCIe controller driver:
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s. Slower Ports still rely on the
not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
waiting for the Link (Niklas Cassel)"
* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
dt-bindings: PCI: Remove 83xx-512x-pci.txt
dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
...
|
|
- Remove resolved hotplug TODO item (Guilherme Giacomo Simoes)
- Fix typos (Bjorn Helgaas)
* pci/misc:
PCI: Fix typos
PCI: hotplug: Remove TODO about unused .get_power(), .hardware_test()
|
|
- Teach handle_simple_irq() to resend an in-progress interrupt (Marc
Zyngier)
- Defer probing if the MSI widget driver hasn't probed yet (Marc Zyngier)
- Drop useless conditional compilation, since pci-xgene.c is only compiled
when CONFIG_PCI_XGENE is selected (Marc Zyngier)
- Drop useless XGENE_PCIE_IP_VER_UNKN IP version (Marc Zyngier)
- Simplify and make per-CPU interrupt setup robust (Marc Zyngier)
- Drop superfluous struct xgene_msi fields (Marc Zyngier)
- Use device-managed memory allocations (Marc Zyngier)
- Drop intermediate xgene_msi_group tracking structure (Marc Zyngier)
- Rewrite pci-xgene-msi.c to fix MSI CPU affinity and clean things up (Marc
Zyngier)
- Resend an MSI racing with itself on a different CPU (Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
- Simplify MSI handler setup/teardown by dropping useless CPU hotplug bits
(Marc Zyngier)
- Remove unused cpuhp_state CPUHP_PCI_XGENE_DEAD (Marc Zyngier)
* pci/controller/xgene:
cpu/hotplug: Remove unused cpuhp_state CPUHP_PCI_XGENE_DEAD
PCI: xgene-msi: Restructure handler setup/teardown
PCI: xgene-msi: Probe as a standard platform driver
PCI: xgene-msi: Resend an MSI racing with itself on a different CPU
PCI: xgene-msi: Sanitise MSI allocation and affinity setting
PCI: xgene-msi: Get rid of intermediate tracking structure
PCI: xgene-msi: Use device-managed memory allocations
PCI: xgene-msi: Drop superfluous fields from xgene_msi structure
PCI: xgene-msi: Make per-CPU interrupt setup robust
PCI: xgene: Drop XGENE_PCIE_IP_VER_UNKN
PCI: xgene: Drop useless conditional compilation
PCI: xgene: Defer probing if the MSI widget driver hasn't probed yet
genirq: Teach handle_simple_irq() to resend an in-progress interrupt
|
|
- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)
* pci/controller/vmd:
PCI: vmd: Add VMD Device ID Support for Panther Lake (PTL)-H/P/U
|
|
- Add DT binding and driver for Sophgo SG2044 PCIe controller driver in
Root Complex mode (Inochi Amaoto)
* pci/controller/sophgo:
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
dt-bindings: pci: Add Sophgo SG2044 PCIe host
|
|
- Fix log message that said "malformed TLP" when it should have said
"Unexpected Completion" (Hans Zhang)
- Fix log message that said "no fatal error" when it should have said "non
fatal error" (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
* pci/controller/rockchip-host:
PCI: rockchip-host: Remove unused header includes
PCI: rockchip-host: Correct non-fatal error log message
PCI: rockchip-host: Fix "Unexpected Completion" log message
|
|
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a chance
to train at a higher speed (Geraldo Nascimento)
* pci/controller/rockchip:
PCI: rockchip: Set Target Link Speed to 5.0 GT/s before retraining
PCI: rockchip: Use standard PCIe definitions
PCI: rockchip: Remove redundant PCIe message routing definitions
|
|
- Export DWC MSI controller related APIs for use by upcoming DWC-based ECAM
implementation (Mayank Rana)
- Rename gen_pci_init() to pci_host_common_ecam_create() and export for use
by controller drivers (Mayank Rana)
- Add DT binding and driver support for SA8255p, which supports ECAM for
Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port resets in
a Root Port stanza and deprecate describing them in the host bridge; this
makes it possible to support multiple Root Ports in the future (Krishna
Chaitanya Chundru)
* pci/controller/qcom:
PCI: qcom: Add support for parsing the new Root Port binding
dt-bindings: PCI: qcom: Move PHY & reset GPIO to Root Port node
PCI: qcom: Add support for Qualcomm SA8255p based PCIe Root Complex
dt-bindings: PCI: qcom,pcie-sa8255p: Document ECAM compliant PCIe root complex
PCI: host-generic: Rename and export gen_pci_init() for PCIe controller drivers
PCI: dwc: Export DWC MSI controller related APIs
|
|
- Use devm_add_action_or_reset() when adding port->clk devm cleanup action
so we don't have to explicitly call clk_put() (Salah Triki)
* pci/controller/mvebu:
PCI: mvebu: Use devm_add_action_or_reset() instead of devm_add_action()
|
|
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features (Richard
Zhu)
- Factor imx_pcie_add_lut_by_rid() out of imx_pcie_enable_device() for use
by LUT configuration (Frank Li)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can trigger
doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from imx_pcie_{assert,deassert}_core_reset(),
which fixes a hotplug regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard Zhu)
* pci/controller/imx6:
PCI: imx6: Delay link start until configfs 'start' written
PCI: imx6: Remove apps_reset toggling from imx_pcie_{assert/deassert}_core_reset
PCI: imx6: Add LUT configuration for MSI/IOMMU in Endpoint mode
PCI: imx6: Add helper function imx_pcie_add_lut_by_rid()
PCI: imx6: Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
PCI: imx6: Add IMX8MQ_EP third 64-bit BAR in epc_features
|
|
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred Mallawa)
* pci/controller/dw-rockchip:
PCI: dw-rockchip: Delay link training after hot reset in EP mode
|
|
- Simplify debugfs 'return' statements (Hans Zhang)
- Make dw_pcie_ptm_ops static (Manivannan Sadhasivam)
* pci/controller/dwc:
PCI: dwc: Make dw_pcie_ptm_ops static
PCI: dwc: Simplify the return value of PTM debugfs functions returning bool
|
|
- Use PCIe Message routing types from the PCI core rather than defining
private ones (Hans Zhang)
* pci/controller/cadence:
PCI: cadence: Replace private message routing enums with PCI core definitions
|
|
- Add optional DT 'num-lanes' property and if present, use it to override
the Maximum Link Width advertised in Link Capabilities (Jim Quinlan)
* pci/controller/brcmstb:
PCI: brcmstb: Replace open coded value with PCIE_T_RRS_READY_MS
MAINTAINERS: Drop Nicolas from maintaining pcie-brcmstb
PCI: brcmstb: Set MLW based on "num-lanes" DT property if present
dt-bindings: PCI: brcm,stb-pcie: Add num-lanes property
|
|
- Rename PCIE_RESET_CONFIG_DEVICE_WAIT_MS to PCIE_RESET_CONFIG_WAIT_MS (the
required delay before sending config requests after a reset) (Niklas
Cassel)
- PCIE_T_RRS_READY_MS and PCIE_RESET_CONFIG_WAIT_MS were two names for the
same delay; replace PCIE_T_RRS_READY_MS with PCIE_RESET_CONFIG_WAIT_MS
and remove PCIE_T_RRS_READY_MS (Niklas Cassel)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ to
dw-rockchip, qcom (Niklas Cassel)
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s in dwc core (Niklas Cassel)
- Move LINK_WAIT_SLEEP_MS and LINK_WAIT_MAX_RETRIES to pci.h and prefix
with 'PCIE_' for potential sharing across drivers (Niklas Cassel)
* pci/controller/linkup-fix:
PCI: Move link up wait time and max retries macros to pci.h
PCI: dwc: Ensure that dw_pcie_wait_for_link() waits 100 ms after link up
PCI: qcom: Wait PCIE_RESET_CONFIG_WAIT_MS after link-up IRQ
PCI: dw-rockchip: Wait PCIE_RESET_CONFIG_WAIT_MS after link-up IRQ
PCI: rockchip-host: Use macro PCIE_RESET_CONFIG_WAIT_MS
PCI: Rename PCIE_RESET_CONFIG_DEVICE_WAIT_MS to PCIE_RESET_CONFIG_WAIT_MS
|
