| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Right now the interrupt handler first reads all updated status registers
and only then clears the interrupts. It's possible that a duplicate
interrupt for a changed register or plug state comes in after the
interrupts have been processed but before they have been cleared:
* plug is inserted, TPS_REG_INT_PLUG_EVENT is set
* TPS_REG_INT_EVENT1 is read
* tps6598x_handle_plug_event() has run and registered the plug
* plug is removed again, TPS_REG_INT_PLUG_EVENT is set (again)
* TPS_REG_INT_CLEAR1 is written, TPS_REG_INT_PLUG_EVENT is cleared
We then have no plug connected and no pending interrupt but the tipd
core still thinks there is a plug. It's possible to trigger this with
e.g. a slightly broken Type-C to USB A converter.
Fix this by first clearing the interrupts and only then reading the
updated registers.
Fixes: 45188f27b3d0 ("usb: typec: tipd: Add support for Apple CD321X")
Fixes: 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers")
Cc: stable@kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-1-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usb-next
Guan-Yu Lin <guanyulin@google.com> says:
Wesley Cheng and Mathias Nyman's USB offload design enables a
co-processor to handle some USB transfers, potentially allowing the
system to sleep (suspend-to-RAM) and save power. However, Linux's System
Sleep model halts the USB host controller when the main system isn't
managing any USB transfers. To address this, the proposal modifies the
system to recognize offloaded USB transfers and manage power
accordingly. This way, offloaded USB transfers could still happen during
system sleep (Suspend-to-RAM).
This involves two key steps:
1. Transfer Status Tracking: Propose offload_usage and corresponding
apis drivers could track USB transfers on the co-processor, ensuring
the system is aware of any ongoing activity.
2. Power Management Adjustment: Modifications to the USB driver stack
(xhci host controller driver, and USB device drivers) allow the
system to sleep (Suspend-to-RAM) without disrupting co-processor
managed USB transfers. This involves adding conditional checks to
bypass some power management operations in the System Sleep model.
Link: https://lore.kernel.org/r/20250911142051.90822-1-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Sharing a USB controller with another entity via xhci-sideband driver
creates power management complexities. To prevent the USB controller
from being inadvertently deactivated while in use by the other entity, a
usage-count based mechanism is implemented. This allows the system to
manage power effectively, ensuring the controller remains available
whenever needed.
In order to maintain full functionality of an offloaded USB devices,
several changes are made within the suspend flow of such devices:
- skip usb_suspend_device() so that the port/hub are still active for
USB transfers via offloaded path.
- not suspending the endpoints which are used by USB interfaces marked
with needs_remote_wakeup. Namely, skip usb_suspend_interface() and
usb_hcd_flush_endpoint() on associated USB interfaces. This reserves a
pending interrupt urb during system suspend for handling the interrupt
transfer, which is necessary since remote wakeup doesn't apply in the
offloaded USB devices when controller is still active.
- not flushing the endpoints of actively offloaded USB devices. Given
that the USB devices is used by another entity, unilaterally flush the
endpoint might lead to unexpected behavior on another entity.
- not suspending the xhci controller. This is done by skipping the
suspend/resume callbacks in the xhci platform driver.
Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Link: https://lore.kernel.org/r/20250911142051.90822-5-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250911142051.90822-5-guanyulin@google.com
|
|
The existing sideband driver only registers sidebands without tracking
their active usage. To address this, sideband will now record its active
usage when it creates/removes interrupters. In addition, a new api is
introduced to provide a means for other dirvers to fetch sideband
activity information on a USB host controller.
Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Link: https://lore.kernel.org/r/20250911142051.90822-4-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250911142051.90822-4-guanyulin@google.com
|
|
Introduce offload_usage and corresponding apis to track offload usage
on each USB device. Offload denotes that there is another co-processor
accessing the USB device via the same USB host controller. To optimize
power usage, it's essential to monitor whether the USB device is
actively used by other co-processor. This information is vital when
determining if a USB device can be safely suspended during system power
state transitions.
Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Link: https://lore.kernel.org/r/20250911142051.90822-3-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250911142051.90822-3-guanyulin@google.com
|
|
Separate dev_pm_ops for different power events such as suspend, thaw,
and hibernation. This is crucial when xhci-plat driver needs to adapt
its behavior based on different power state changes.
Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Link: https://lore.kernel.org/r/20250911142051.90822-2-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250911142051.90822-2-guanyulin@google.com
|
|
Add a driver for the Intel USBIO USB IO-expander used by the MIPI cameras
on various new (Meteor Lake and later) Intel laptops.
This is an USB bridge driver which adds auxbus child devices for the GPIO,
I2C and SPI functions of the USBIO chip and which exports IO-functions for
the drivers for the auxbus child devices to communicate with the USBIO
device's firmware.
Co-developed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Israel Cepeda <israel.a.cepeda.lopez@intel.com>
Link: https://lore.kernel.org/r/20250911181343.77398-2-hansg@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On Qualcomm DWC3 dual-role controllers, the conndone/disconnect events in
device mode are generated by controller when software writes to QSCRATCH
registers in Qualcomm Glue layer rather than the vbus line being routed to
dwc3 core IP for it to recognize and generate these events.
UTMI_OTG_VBUS_VALID bit of QSCRATCH_HS_PHY_CTRL register needs to be set
to generate a connection done event and to be cleared for the controller to
generate a disconnect event during cable removal. When the disconnect is
not generated upon cable removal, the "connected" flag of dwc3 is left
marked as "true" and it blocks suspend routines and for that to happen upon
cable removal, the cable disconnect notification coming in via set_role
call need to be provided to the Qualcomm glue layer as well.
Currently, the way DWC3 core and Qualcomm legacy glue driver are designed,
there is no mechanism through which the DWC3 core can notify the Qualcomm
glue layer of any role changes which it receives via role switch. To
register these glue callbacks at probe time, for enabling core to notify
glue layer, the legacy Qualcomm driver has no way to find out when the
child driver probe was successful since it does not check for the same
during of_platform_populate.
Hence implement the following glue callbacks for flattened Qualcomm glue
driver:
1. set_role: To pass role switching information from drd layer to glue.
This information is needed to identify NONE/DEVICE mode switch and modify
QSCRATCH to generate connect-done event on device mode entry and disconnect
event on cable removal in device mode.
2. run_stop: When booting up in device mode, if autouspend is enabled and
userspace doesn't write UDC on boot, controller enters autosuspend. After
this, if the userspace writes to UDC in the future, run_stop notifier is
required to enable UTMI_OTG_VBUS_VALID of QSCRATCH so that connect done
event is generated after run_stop(1) is done to finish enumeration.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250907181412.2174616-3-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In certain situations like role switching, the glue layers need to be
informed of these events, so that they can take any necessary action.
But in non-flattened implementations, the glue drivers have no data on
when the core driver probe was successful post invoking of_platform_
populate. Now that the core driver supports flattened implementations
as well, introduce vendor callbacks that can be passed on from glue to
core before invoking dwc3_core_probe.
Introduce callbacks to notify glue layer of role_switch and run_stop
changes. These can be used by flattened implementation of Qualcomm
glue layer to generate connect/disconnect events in controller during
cable connect and run stop modifications by udc in device mode.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250907181412.2174616-2-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When the system is suspended, USB hot-plugging/unplugging can trigger
wake events of the Tegra USB host controller.
Enable support for USB wake-up events by parsing device-tree to see if
the interrupts for the wake-up events are present and if so configure
those interrupts. Note that if wake-up events are not present, still
allow the USB host controller to probe as normal.
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Link: https://lore.kernel.org/r/20250811074558.1062048-5-haotienh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While the userspace program can be notified of gadget state changes,
timing issue can lead to missed transitions when reading the state
value.
Introduce a trace event for usb_gadget_set_state to reliably track state
transitions.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250818082722.2952867-1-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The DWC2 IP can be properly integrated in a SoC to work at high-speed
USB speed but some board issues, EMC constraints or any other reasons
can lead to the need to limit this USB speed at board level.
The device-tree 'maximum-speed' property already exists for this purpose
but is not handled by the DWC2 driver.
Fill this lack adding support for 'maximum-speed' property and so allow
to limit the USB speed in device-tree (board description).
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20250910160730.585303-1-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add wakeup support for tcpci. If the user enables the wakeup file, call
enable_irq_wake() during system suspend and disable_irq_wake() during
system resume. Since this driver supports shared interrupts, mask the
chip interrupt by default when wakeup is disabled to avoid affecting
other IRQ users.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250910105042.695146-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The buffer size of sysfs is fixed at PAGE_SIZE, and the page offset
of the buf parameter of sysfs_emit_at() must be 0, there is no need
to manually manage the buf pointer offset.
Fixes: 711d41ab4a0e ("usb: core: Use sysfs_emit_at() when showing dynamic IDs")
Reported-by: syzbot+b6445765657b5855e869@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b6445765657b5855e869
Tested-by: syzbot+b6445765657b5855e869@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://lore.kernel.org/r/tencent_B32D6D8C9450EBFEEE5ACC2C7B0E6C402D0A@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB serial device ids for 6.17-rc6
Here are some new modem device ids.
Everything has been in linux-next with no reported issues.
* tag 'usb-serial-6.17-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit Cinterion LE910C4-WWX new compositions
USB: serial: option: add Telit Cinterion FN990A w/audio compositions
|
|
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://lore.kernel.org/r/20250902132613.84876-1-liaoyuanhong@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The EP-IN of MIDI2 (altset 1) wasn't initialized in
f_midi2_create_usb_configs() as it's an INT EP unlike others BULK
EPs. But this leaves rather the max packet size unchanged no matter
which speed is used, resulting in the very slow access.
And the wMaxPacketSize values set there look legit for INT EPs, so
let's initialize the MIDI2 EP-IN there for achieving the equivalent
speed as well.
Fixes: 8b645922b223 ("usb: gadget: Add support for USB MIDI 2.0 function driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20250905133240.20966-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The gadget card driver forgot to call snd_ump_update_group_attrs()
after adding FBs, and this leaves the UMP group attributes
uninitialized. As a result, -ENODEV error is returned at opening a
legacy rawmidi device as an inactive group.
This patch adds the missing call to address the behavior above.
Fixes: 8b645922b223 ("usb: gadget: Add support for USB MIDI 2.0 function driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20250904153932.13589-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
tcpm_handle_vdm_request delivers messages to the partner altmode or the
cable altmode depending on the SVDM response type, which is incorrect.
The partner or cable should be chosen based on the received message type
instead.
Also add this filter to ADEV_NOTIFY_USB_AND_QUEUE_VDM, which is used when
the Enter Mode command is responded to by a NAK on SOP or SOP' and when
the Exit Mode command is responded to by an ACK on SOP.
Fixes: 7e7877c55eb1 ("usb: typec: tcpm: add alt mode enter/exit/vdm support for sop'")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250821203759.1720841-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Yunseong Kim and the syzbot fuzzer both reported a problem in
RT-enabled kernels caused by the way dummy-hcd mixes interrupt
management and spin-locking. The pattern was:
local_irq_save(flags);
spin_lock(&dum->lock);
...
spin_unlock(&dum->lock);
... // calls usb_gadget_giveback_request()
local_irq_restore(flags);
The code was written this way because usb_gadget_giveback_request()
needs to be called with interrupts disabled and the private lock not
held.
While this pattern works fine in non-RT kernels, it's not good when RT
is enabled. RT kernels handle spinlocks much like mutexes; in particular,
spin_lock() may sleep. But sleeping is not allowed while local
interrupts are disabled.
To fix the problem, rewrite the code to conform to the pattern used
elsewhere in dummy-hcd and other UDC drivers:
spin_lock_irqsave(&dum->lock, flags);
...
spin_unlock(&dum->lock);
usb_gadget_giveback_request(...);
spin_lock(&dum->lock);
...
spin_unlock_irqrestore(&dum->lock, flags);
This approach satisfies the RT requirements.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Fixes: b4dbda1a22d2 ("USB: dummy-hcd: disable interrupts during req->complete")
Reported-by: Yunseong Kim <ysk@kzalloc.com>
Closes: <https://lore.kernel.org/linux-usb/5b337389-73b9-4ee4-a83e-7e82bf5af87a@kzalloc.com/>
Reported-by: syzbot+8baacc4139f12fa77909@syzkaller.appspotmail.com
Closes: <https://lore.kernel.org/linux-usb/68ac2411.050a0220.37038e.0087.GAE@google.com/>
Tested-by: syzbot+8baacc4139f12fa77909@syzkaller.appspotmail.com
CC: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
CC: stable@vger.kernel.org
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/bb192ae2-4eee-48ee-981f-3efdbbd0d8f0@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Suspend-resume cycle test revealed a memory leak in 6.17-rc3
Turns out the slot_id race fix changes accidentally ends up calling
xhci_free_virt_device() with an incorrect vdev parameter.
The vdev variable was reused for temporary purposes right before calling
xhci_free_virt_device().
Fix this by passing the correct vdev parameter.
The slot_id race fix that caused this regression was targeted for stable,
so this needs to be applied there as well.
Fixes: 2eb03376151b ("usb: xhci: Fix slot_id resource race conflict")
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/linux-usb/20250829181354.4450-1-00107082@163.com
Suggested-by: Michal Pecio <michal.pecio@gmail.com>
Suggested-by: David Wang <00107082@163.com>
Cc: stable@vger.kernel.org
Tested-by: David Wang <00107082@163.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pending requests will be flushed on disconnect, and the corresponding
TRBs will be turned into No-op TRBs, which are ignored by the xHC
controller once it starts processing the ring.
If the USB debug cable repeatedly disconnects before ring is started
then the ring will eventually be filled with No-op TRBs.
No new transfers can be queued when the ring is full, and driver will
print the following error message:
"xhci_hcd 0000:00:14.0: failed to queue trbs"
This is a normal case for 'in' transfers where TRBs are always enqueued
in advance, ready to take on incoming data. If no data arrives, and
device is disconnected, then ring dequeue will remain at beginning of
the ring while enqueue points to first free TRB after last cancelled
No-op TRB.
s
Solve this by reinitializing the rings when the debug cable disconnects
and DbC is leaving the configured state.
Clear the whole ring buffer and set enqueue and dequeue to the beginning
of ring, and set cycle bit to its initial state.
Cc: stable@vger.kernel.org
Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Decouple allocation of endpoint ring buffer from initialization
of the buffer, and initialization of endpoint context parts from
from the rest of the contexts.
It allows driver to clear up and reinitialize endpoint rings
after disconnect without reallocating everything.
This is a prerequisite for the next patch that prevents the transfer
ring from filling up with cancelled (no-op) TRBs if a debug cable is
reconnected several times without transferring anything.
Cc: stable@vger.kernel.org
Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Sakari Ailus <sakari.ailus@linux.intel.com> says:
This series enables support for eUSB2 Double Isochronous IN Bandwidth UVC
devices specified in 'USB 2.0 Double Isochronous IN Bandwidth' ECN. In
short, it adds support for new integrated USB2 webcams that can send twice
the data compared to conventional USB2 webcams.
These devices are identified by the device descriptor bcdUSB 0x0220 value.
They have an additional eUSB2 Isochronous Endpoint Companion Descriptor,
and a zero max packet size in regular isoc endpoint descriptor. Support
for parsing that new descriptor was added in commit
c749f058b437 ("USB: core: Add eUSB2 descriptor and parsing in USB core")
This series adds support to UVC, USB core, and xHCI to identify eUSB2
double isoc devices, and allow and set proper max packet, iso frame desc
sizes, bytes per interval, and other values in URBs and xHCI endpoint
contexts needed to support the double data rates for eUSB2 double isoc
devices.
since v4:
https://lore.kernel.org/linux-usb/20250812132445.3185026-1-sakari.ailus@linux.intel.com
- New patch: use le16_to_cpu() to access endpoint descriptor's
wMaxPacketSize field, which is an __le16. This isn't a bugfix as the
value was compared to 0.
- New patch: add USB device speed check for eUSB2 isochronous endpoint
companion parsing. The check is then removed from sites checking the
existence of the companion (through companion's bDescriptorType field,
which is non-zero for valid descriptors).
- New patch: do not parse eUSB2 isoc double BW companion descriptor on
interrupt or OUT endpoints. It is not supposed to be found there,
according to the ECN.
- Rename usb_endpoint_max_isoc_bpi() as
usb_endpoint_max_periodic_payload() and move it right after
usb_maxpacket().
- Fixed @ep reference in kernel-doc documentation for
usb_endpoint_max_periodic_payload().
- In usb_endpoint_max_periodic_payload(), call struct usb_device pointer
argument "udev" instead of "dev", to align with naming elsewhere.
- Add support for interrupt endpoints in
usb_endpoint_max_periodic_payload(); eUSB2 double isoc BW is still
limited to isochronous endpoints though.
- In usb_endpoint_max_periodic_payload(), remove the separate case for
USB_SPEED_HIGH as the check is already done in parsing the eUSB isoc
double BW companion, which is checked for.
- New patch: use usb_endpoint_max_periodic_payload() in xHCI driver,
replacing xhci_get_max_esit_payload().
- Check non-zero bDescriptorType field of ep->eusb2_isoc_ep_comp instead
of dwBytesPerInterval value exceeding 3072, where
xhci_eusb2_is_isoc_bw_double() was used. This aligns the checks of eUSB2
isochronous double bandwidth support for an endpoint.
- New patch: introduce usb_endpoint_is_hs_isoc_double() to figure out
whether an endpoint uses isochronous double bandwidth and use the
function in the xHCI driver and the usb core.
xhci_eusb2_is_isoc_bw_double() is dropped, as well as the
MAX_ISOC_XFER_SIZE_HS macro. usb_endpoint_is_hs_isoc_double() also
includes check for bcdUSB == 0x220, to anticipate adding support for
eUSB2V2.
- Merge condition for checking eUSB2 isoc double bw support for
xHCI/endpoint in xhci_get_endpoint_mult().
- Improve comment regarding maximum packet size bits 12:11 in
xhci_get_endpoint_max_burst().
- Aligned subject prefixes with the recent patches to the same files.
since v3:
https://lore.kernel.org/linux-usb/20250807055355.1257029-1-sakari.ailus@linux.intel.com/
- Use spaces in aligning macro body for HCC2_EUSB2_DIC() (1st patch).
- Move usb_endpoint_max_isoc_bpi() to drivers/usb/core/usb.c (3rd patch).
since v2:
https://lore.kernel.org/linux-usb/20250711083413.1552423-1-sakari.ailus@linux.intel.com
- Use ep->eusb2_isoc_ep_comp.bDescriptorType to determined whether the
eUSB2 isochronous endpoint companion descriptor exists.
- Clean up eUSB2 double isoc bw maxp calculation.
- Drop le16_to_cpu(udev->descriptor.bcdUSB) == 0x220 check from
xhci_eusb2_is_isoc_bw_double() -- it's redundant as
ep->eusb2_isoc_ep_comp.dwBytesPerInterval will be zero otherwise.
- Add kernel-doc documentation for usb_endpoint_max_isoc_bpi().
- Check the endpoint has IN direction in usb_endpoint_max_isoc_bpi() and
usb_submit_urb() as a condition for eUSB2 isoc double bw.
since v1:
https://lore.kernel.org/linux-usb/20250616093730.2569328-2-mathias.nyman@linux.intel.com
- Introduce uvc_endpoint_max_isoc_bpi() to obtain maximum bytes per
interval value for an endpoint, in a new patch (3rd). This code has been
slightly reworked from the instance in the UVC driver, including support
for SuperSpeedPlus Isochronous Endpoint Companion.
- Use usb_endpoint_max_isoc_bpi() in the UVC driver instead of open-coding
eUSB2 support there, also drop now-redundant uvc_endpoint_max_bpi().
- Use u32 for maximum bpi and related information in the UVC driver -- the
value could be larger than a 16-bit type can hold.
- Assume max in usb_submit_urb() is a natural number as
usb_endpoint_maxp() returns only natural numbers (2nd patch).
Link: https://lore.kernel.org/r/20250820143824.551777-1-sakari.ailus@linux.intel.com
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
eUSB2 double isochronous in bandwidth devices support up to 6 transactions
per microframe, and thus doubles the total bytes possible to receive per
microframe.
Support larger URB isoc frame sizes for eUSB2 double isoc in endpoints.
Also usb_endpoint_maxp() returns a natural number so there's no need to
assume it could be < 0.
Signed-off-by: Rai, Amardeep <amardeep.rai@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250820143824.551777-9-sakari.ailus@linux.intel.com
|
|
Detect eUSB2 double isoc bw capable hosts and devices, and set the proper
xhci endpoint context values such as 'Mult', 'Max Burst Size', and 'Max
ESIT Payload' to enable the double isochronous bandwidth endpoints.
Intel xHC uses the endpoint context 'Mult' field for eUSB2 isoc
endpoints even if hosts supporting Large ESIT Payload Capability should
normally ignore the mult field.
Signed-off-by: Rai, Amardeep <amardeep.rai@intel.com>
Co-developed-by: Kannappan R <r.kannappan@intel.com>
Signed-off-by: Kannappan R <r.kannappan@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Co-developed-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250820143824.551777-8-sakari.ailus@linux.intel.com
|
|
Introduce usb_endpoint_is_hs_isoc_double() tell whether an endpoint
conforms to USB 2.0 Isochronous Double IN Bandwidth ECN.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250820143824.551777-7-sakari.ailus@linux.intel.com
|
|
Use the newly added usb_endpoint_max_periodic_payload() to obtain the
maximum number of bytes to transfer during a service interval for
isochronous and interrupt endpoints. This will replace the xhci-specific
xhci_get_max_esit_payload() which is removed as redundant.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250820143824.551777-6-sakari.ailus@linux.intel.com
|
|
Add usb_endpoint_max_periodic_payload() to obtain maximum payload bytes in
a service interval for isochronous and interrupt endpoints in a USB
version independent way.
Signed-off-by: Rai, Amardeep <amardeep.rai@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250820143824.551777-5-sakari.ailus@linux.intel.com
|
|
The eUSB2 isochronous double bandwidth endpoint descriptor is allowed for
the isochronous IN endpoints, according to the ECN. Do not parse these
descriptors if they are found in interrupt or OUT endpoints.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250820143824.551777-4-sakari.ailus@linux.intel.com
|
|
Check that a device is a high-speed one before proceeding to parse the
eUSB2 isochronous endpoint companion descriptors.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250820143824.551777-3-sakari.ailus@linux.intel.com
|
|
wMaxPacketSize field in struct usb_endpoint_descriptor is an __le16, use
le16_to_cpu() to read it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250820143824.551777-2-sakari.ailus@linux.intel.com
|
|
"Power Reading" bit is introduced in UCSI v2.1 and so limit the
check for that bit only if version supported is 2.1 or above.
Fixes: c851b71fd6cd ("usb: typec: ucsi: Add support for READ_POWER_LEVEL command")
Signed-off-by: Venkat Jayaraman <venkat.jayaraman@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250905184401.3222530-1-venkat.jayaraman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
cdnsp gadget
In the __cdnsp_gadget_init() and cdnsp_gadget_exit() functions, the gadget
structure (pdev->gadget) was freed before its endpoints.
The endpoints are linked via the ep_list in the gadget structure.
Freeing the gadget first leaves dangling pointers in the endpoint list.
When the endpoints are subsequently freed, this results in a use-after-free.
Fix:
By separating the usb_del_gadget_udc() operation into distinct "del" and
"put" steps, cdnsp_gadget_free_endpoints() can be executed prior to the
final release of the gadget structure with usb_put_gadget().
A patch similar to bb9c74a5bd14("usb: dwc3: gadget: Free gadget structure
only after freeing endpoints").
Signed-off-by: Chen Yufeng <chenyufeng@iie.ac.cn>
Link: https://lore.kernel.org/r/20250905094842.1232-1-chenyufeng@iie.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The cdnsp-pci driver uses pcim_enable_device() to enable a PCI device,
which means the device will be automatically disabled on driver detach
through the managed device framework. The manual pci_disable_device()
call in the error path is therefore redundant.
Found via static anlaysis and this is similar to commit 99ca0b57e49f
("thermal: intel: int340x: processor: Fix warning during module unload").
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20250903141613.2535472-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://lore.kernel.org/r/20250902132720.85504-1-liaoyuanhong@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Tracepoints that are defined take up around 5K each, even if they are not
used. If they are defined and not used, then they waste memory for unused
code. Soon unused tracepoints will cause warnings.
Remove the unused tracepoints of the cdnsp subsystem. They are:
cdnsp_defered_event
cdnsp_ep0_halted
cdnsp_free_priv_device
cdnsp_handle_cmd_flush_ep
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20250829015650.224063821@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Tracepoints that are defined take up around 5K each, even if they are not
used. If they are defined and not used, then they waste memory for unused
code. Soon unused tracepoints will cause warnings.
Remove the unused tracepoints of the cdns3 subsystem. They are:
cdns3_mapped_request
cdns3_map_request
cdns3_stream_transfer_split
cdns3_stream_transfer_split_next_part
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20250829015650.053498355@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Tracepoints that are defined take up around 5K each, even if they are not
used. If they are defined and not used, then they waste memory for unused
code. Soon unused tracepoints will cause warnings.
Remove the unused tracepoints of the cdns2 subsystem. They are:
cdns2_ep0_enqueue
cdns2_ep0_set_config
cdns2_ep_queue
cdns2_iso_out_ep_disable
cdns2_lpm
cdns2_mapped_request
cdns2_map_request
cdns2_may_wakeup
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20250829015649.885512884@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, the usb251xb assumes i2c control. But from HW point of
view, the hub supports usage case without any i2c, we only want the
gpio controls.
Refactor the code so that register writes for configuration are only
performed if the device has a i2c_client provided and also register as
a platform driver. This allows the driver to be used to manage GPIO
based control of the device.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20250825234509.1041-4-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Richard Leitner <richard.leitner@linux.dev>
Link: https://lore.kernel.org/r/20250825234509.1041-3-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Samsung S3C24xx family of SoCs was removed the Linux kernel in the
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support"), in January
2023. There are no in-kernel users of remaining S3C24xx compatibles.
The driver (named s3c2410) is still being used via platform code for
S3C64xx platforms.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250831122222.50332-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Set the hid req->zero flag of ep0/in_ep to true by default,
then the UDC drivers can transfer a zero length packet at
the end if the hid transfer with size divisible to EPs max
packet size according to the USB 2.0 spec.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Link: https://lore.kernel.org/r/1756204087-26111-1-git-send-email-william.wu@rock-chips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Once the use_os_string flag is set to true for some functions
(e.g. adb/mtp) which need to response the OS string, and then
if we re-bind the ConfigFS gadget to use the other functions
(e.g. hid) which should not to response the OS string, however,
because the use_os_string flag is still true, so the usb gadget
response the OS string descriptor incorrectly, this can cause
the USB device to be unrecognizable on the Windows system.
An example of this as follows:
echo 1 > os_desc/use
ln -s functions/ffs.adb configs/b.1/function0
start adbd
echo "<udc device>" > UDC #succeed
stop adbd
rm configs/b.1/function0
echo 0 > os_desc/use
ln -s functions/hid.gs0 configs/b.1/function0
echo "<udc device>" > UDC #fail to connect on Windows
This patch sets the use_os_string flag to false at bind if
the functions not support OS Descriptors.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Fixes: 87213d388e92 ("usb: gadget: configfs: OS String support")
Link: https://lore.kernel.org/r/1755833769-25434-1-git-send-email-william.wu@rock-chips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The vbus IRQ is optional, so no error message should be printed if it is
not available.
Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20250825124901.2190539-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use dwc3_mode_string as the single source of truth for mode-to-string
conversion.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250822092411.173519-2-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Changes to the port capability can be indirectly observed by tracing
register writes to DWC3_GCTL. However, this requires interpreting the
raw value, which is neither intuitive nor precise for debugging.
Monitoring these mode changes is essential for resolving issues related
to USB role switching and enumeration.
Introduce a dedicated trace event to provide a human-readable log when
the port capability is configured.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250822092411.173519-1-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the twl6030_usb_probe(), the variable ret is declared as
a u32 type. However, since ret may receive -ENODEV when accepting
the return value of omap_usb2_set_comparator().Therefore, its type
should be changed to int.
Fixes: 0e98de67bacba ("usb: otg: make twl6030_usb as a comparator driver to omap_usb2")
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Link: https://lore.kernel.org/r/20250822092224.30645-1-zhao.xichao@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
rts51x_bulk_transport()
Simplify the calculation of 'residue' in rts51x_bulk_transport() and
avoid unnecessarily reassigning 'residue' to itself.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250828162623.4840-3-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Obviously file on the website was renamed.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Link: https://lore.kernel.org/r/20250829161708.106813-1-petr.vorel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
