aboutsummaryrefslogtreecommitdiffstats
path: root/rust/helpers/task.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2025-09-16rust: kunit: allow `cfg` on `test`sKaibo Ma2-12/+43
The `kunit_test` proc macro only checks for the `test` attribute immediately preceding a `fn`. If the function is disabled via a `cfg`, the generated code would result in a compile error referencing a non-existent function [1]. This collects attributes and specifically cherry-picks `cfg` attributes to be duplicated inside KUnit wrapper functions such that a test function disabled via `cfg` compiles and is marked as skipped in KUnit correctly. Link: https://lore.kernel.org/r/20250916021259.115578-1-ent3rm4n@gmail.com Link: https://lore.kernel.org/rust-for-linux/CANiq72==48=69hYiDo1321pCzgn_n1_jg=ez5UYXX91c+g5JVQ@mail.gmail.com/ [1] Closes: https://github.com/Rust-for-Linux/linux/issues/1185 Suggested-by: Miguel Ojeda <ojeda@kernel.org> Suggested-by: David Gow <davidgow@google.com> Signed-off-by: Kaibo Ma <ent3rm4n@gmail.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-09-15kunit: qemu_configs: Add MIPS configurationsThomas Weißschuh4-0/+74
Add basic support to run various MIPS variants via kunit_tool using the virtualized malta platform. Link: https://lore.kernel.org/r/20250908-kunit-mips-v5-1-d9f0632d1854@linutronix.de Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-09-15kunit: Enable PCI on UML without triggering WARN()Thomas Weißschuh2-3/+9
Various KUnit tests require PCI infrastructure to work. All normal platforms enable PCI by default, but UML does not. Enabling PCI from .kunitconfig files is problematic as it would not be portable. So in commit 6fc3a8636a7b ("kunit: tool: Enable virtio/PCI by default on UML") PCI was enabled by way of CONFIG_UML_PCI_OVER_VIRTIO=y. However CONFIG_UML_PCI_OVER_VIRTIO requires additional configuration of CONFIG_UML_PCI_OVER_VIRTIO_DEVICE_ID or will otherwise trigger a WARN() in virtio_pcidev_init(). However there is no one correct value for UML_PCI_OVER_VIRTIO_DEVICE_ID which could be used by default. This warning is confusing when debugging test failures. On the other hand, the functionality of CONFIG_UML_PCI_OVER_VIRTIO is not used at all, given that it is completely non-functional as indicated by the WARN() in question. Instead it is only used as a way to enable CONFIG_UML_PCI which itself is not directly configurable. Instead of going through CONFIG_UML_PCI_OVER_VIRTIO, introduce a custom configuration option which enables CONFIG_UML_PCI without triggering warnings or building dead code. Link: https://lore.kernel.org/r/20250908-kunit-uml-pci-v2-1-d8eba5f73c9d@linutronix.de Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-08-26Documentation: kunit: Document new parameterized test featuresMarie Zhussupova1-5/+337
This patch updates the KUnit docs to show how to use the new parameterized test context to share resources between parameter runs. It documents and show examples of different ways the test user can pass parameter arrays to a parameterized test. Finally, it specifies the parameterized testing terminology. Link: https://lore.kernel.org/r/20250826091341.1427123-8-davidgow@google.com Reviewed-by: Rae Moar <rmoar@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Marie Zhussupova <marievic@google.com> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-08-26kunit: Add example parameterized test with direct dynamic parameter array setupMarie Zhussupova1-0/+104
Introduce example_params_test_with_init_dynamic_arr(). This new KUnit test demonstrates directly assigning a dynamic parameter array, using the kunit_register_params_array() macro, to a parameterized test context. It highlights the use of param_init() and param_exit() for initialization and exit of a parameterized test, and their registration to the test case with KUNIT_CASE_PARAM_WITH_INIT(). Link: https://lore.kernel.org/r/20250826091341.1427123-7-davidgow@google.com Reviewed-by: Rae Moar <rmoar@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Marie Zhussupova <marievic@google.com> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-08-26kunit: Add example parameterized test with shared resource management using ↵Marie Zhussupova1-0/+113
the Resource API Add example_params_test_with_init() to illustrate how to manage shared resources across a parameterized KUnit test. This example showcases the use of the new param_init() function and its registration to a test using the KUNIT_CASE_PARAM_WITH_INIT() macro. Additionally, the test demonstrates how to directly pass a parameter array to the parameterized test context via kunit_register_params_array() and leveraging the Resource API for shared resource management. Link: https://lore.kernel.org/r/20250826091341.1427123-6-davidgow@google.com Reviewed-by: Rae Moar <rmoar@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Marie Zhussupova <marievic@google.com> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-08-26kunit: Enable direct registration of parameter arrays to a KUnit testMarie Zhussupova2-6/+91
KUnit parameterized tests currently support two primary methods f or getting parameters: 1. Defining custom logic within a generate_params() function. 2. Using the KUNIT_ARRAY_PARAM() and KUNIT_ARRAY_PARAM_DESC() macros with a pre-defined static array and passing the created *_gen_params() to KUNIT_CASE_PARAM(). These methods present limitations when dealing with dynamically generated parameter arrays, or in scenarios where populating parameters sequentially via generate_params() is inefficient or overly complex. This patch addresses these limitations by adding a new `params_array` field to `struct kunit`, of the type `kunit_params`. The `struct kunit_params` is designed to store the parameter array itself, along with essential metadata including the parameter count, parameter size, and a get_description() function for providing custom descriptions for individual parameters. The `params_array` field can be populated by calling the new kunit_register_params_array() macro from within a param_init() function. This will register the array as part of the parameterized test context. The user will then need to pass kunit_array_gen_params() to the KUNIT_CASE_PARAM_WITH_INIT() macro as the generator function, if not providing their own. kunit_array_gen_params() is a KUnit helper that will use the registered array to generate parameters. The arrays passed to KUNIT_ARRAY_PARAM(,DESC) will also be registered to the parameterized test context for consistency as well as for higher availability of the parameter count that will be used for outputting a KTAP test plan for a parameterized test. This modification provides greater flexibility to the KUnit framework, allowing testers to easily register and utilize both dynamic and static parameter arrays. Link: https://lore.kernel.org/r/20250826091341.1427123-5-davidgow@google.com Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Rae Moar <rmoar@google.com> Signed-off-by: Marie Zhussupova <marievic@google.com> [Only output the test plan if using kunit_array_gen_params --David] Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-08-26kunit: Pass parameterized test context to generate_params()Marie Zhussupova5-17/+22
To enable more complex parameterized testing scenarios, the generate_params() function needs additional context beyond just the previously generated parameter. This patch modifies the generate_params() function signature to include an extra `struct kunit *test` argument, giving test users access to the parameterized test context when generating parameters. The `struct kunit *test` argument was added as the first parameter to the function signature as it aligns with the convention of other KUnit functions that accept `struct kunit *test` first. This also mirrors the "this" or "self" reference found in object-oriented programming languages. This patch also modifies xe_pci_live_device_gen_param() in xe_pci.c and nthreads_gen_params() in kcsan_test.c to reflect this signature change. Link: https://lore.kernel.org/r/20250826091341.1427123-4-davidgow@google.com Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Rae Moar <rmoar@google.com> Acked-by: Marco Elver <elver@google.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Marie Zhussupova <marievic@google.com> [Catch some additional gen_params signatures in drm/xe/tests --David] Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-08-26kunit: Introduce param_init/exit for parameterized test context managementMarie Zhussupova3-1/+55
Add (*param_init) and (*param_exit) function pointers to `struct kunit_case`. Users will be able to set them via the new KUNIT_CASE_PARAM_WITH_INIT() macro. param_init/exit will be invoked by kunit_run_tests() once before and once after the parameterized test, respectively. They will receive the `struct kunit` that holds the parameterized test context; facilitating init and exit for shared state. This patch also sets param_init/exit to None in rust/kernel/kunit.rs. Link: https://lore.kernel.org/r/20250826091341.1427123-3-davidgow@google.com Reviewed-by: Rae Moar <rmoar@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Marie Zhussupova <marievic@google.com> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-08-26kunit: Add parent kunit for parameterized test contextMarie Zhussupova2-16/+26
Currently, KUnit parameterized tests lack a mechanism to share resources across parameter runs because the same `struct kunit` instance is cleaned up and reused for each run. This patch introduces parameterized test context, enabling test users to share resources between parameter runs. It also allows setting up resources that need to be available for all parameter runs only once, which is helpful in cases where setup is expensive. To establish a parameterized test context, this patch adds a parent pointer field to `struct kunit`. This allows resources added to the parent `struct kunit` to be shared and accessible across all parameter runs. In kunit_run_tests(), the default `struct kunit` created is now designated to act as the parameterized test context whenever a test is parameterized. Subsequently, a new `struct kunit` is made for each parameter run, and its parent pointer is set to the `struct kunit` that holds the parameterized test context. Link: https://lore.kernel.org/r/20250826091341.1427123-2-davidgow@google.com Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Rae Moar <rmoar@google.com> Signed-off-by: Marie Zhussupova <marievic@google.com> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-08-26kunit: tool: Accept --raw_output=full as an alias of 'all'David Gow1-2/+2
I can never remember whether --raw_output takes 'all' or 'full'. No reason we can't support both. For the record, 'all' is the recommended, documented option. Link: https://lore.kernel.org/r/20250730031624.1911689-1-davidgow@google.com Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Rae Moar <rmoar@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-08-15kunit: tool: Parse skipped tests from kselftest.hThomas Weißschuh2-4/+7
Skipped tests reported by kselftest.h use a different format than KTAP, there is no explicit test name. Normally the test name is part of the free-form string after the SKIP keyword: ok 3 # SKIP test: some reason Extend the parser to handle those correctly. Use the free-form string as test name instead. Link: https://lore.kernel.org/r/20250813-kunit-kselftesth-skip-v1-1-57ae3de4f109@linutronix.de Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-08-15kunit: Always descend into kunit directory during buildThomas Weißschuh2-5/+1
For kbuild to properly clean up these build artifacts in the subdirectory, even after CONFIG_KUNIT changed do disabled, the directory needs to be processed always. Pushing the special logic for hook.o into the kunit Makefile also makes the logic easier to understand. Link: https://lore.kernel.org/r/20250813-kunit-always-descend-v1-1-7bbd387ff13b@linutronix.de Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-08-10Linux 6.17-rc1v6.17-rc1Linus Torvalds1-2/+2
2025-08-09tools/power turbostat: version 2025.09.09Len Brown1-1/+1
Probe and display L3 Cache topology Add ability to average an added counter (useful for pre-integrated "counters", such as Watts) Break the limit of 64 built-in counters. Assorted bug fixes and minor feature tweaks Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-09tools/power turbostat: Handle non-root legacy-uncore sysfs permissionsLen Brown1-1/+2
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/ may be readable by all, but /sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/current_freq_khz may be readable only by root. Non-root turbostat users see complaints in this scenario. Fail probe of the interface if we can't read current_freq_khz. Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Original-patch-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-09tools/power turbostat: standardize PER_THREAD_PARAMSLen Brown1-20/+22
use a macro for PER_THREAD_PARAMS to make adding one later more clear. no functional change Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-09tools/power turbostat: Fix DMR supportZhang Rui1-14/+15
Together with the RAPL MSRs, there are more MSRs gone on DMR, including PLR (Perf Limit Reasons), and IRTL (Package cstate Interrupt Response Time Limit) MSRs. The configurable TDP info should also be retrieved from TPMI based Intel Speed Select Technology feature. Remove the access of these MSRs for DMR. Improve the DMR platform feature table to make it more readable at the same time. Fixes: 83075bd59de2 ("tools/power turbostat: Add initial support for DMR") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-09tools/power turbostat: add format "average" for external attributesMichael Hebenstreit2-11/+22
External atributes with format "raw" are not printed in summary lines for nodes/packages (or with option -S). The new format "average" behaves like "raw" but also adds the summary data Signed-off-by: Michael Hebenstreit <michael.hebenstreit@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-09tools/power turbostat: delete GET_PKG()Len Brown1-15/+6
pkg_base[pkg_id] is a simple array of structure pointers, let the compiler treat it that way. Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-09tools/power turbostat: probe and display L3 cache topologyLen Brown1-3/+31
Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-09tools/power turbostat: Support more than 64 built-in-countersLen Brown1-154/+406
We have out-grown the ability to use a 64-bit memory location to inventory every possible built-in counter. Leverage the the CPU_SET(3) macros to break this barrier. Also, break the Joules & Watts counters into two, since we can no longer 'or' them together... Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-09tools/power turbostat.8: Document Totl%C0, Any%C0, GFX%C0, CPUGFX% columnsLen Brown1-0/+8
Explain the meaning of the Totl%C0, Any%C0, GFX%C0, CPUGFX% columns. Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-08tools/power turbostat: Fix bogus SysWatt for forked programZhang Rui1-0/+1
Similar to delta_cpu(), delta_platform() is called in turbostat main loop. This ensures accurate SysWatt readings in periodic monitoring mode $ sudo turbostat -S -q --show power -i 1 CoreTmp PkgTmp PkgWatt CorWatt GFXWatt RAMWatt PKG_% RAM_% SysWatt 60 61 6.21 1.13 0.16 0.00 0.00 0.00 13.07 58 61 6.00 1.07 0.18 0.00 0.00 0.00 12.75 58 61 5.74 1.05 0.17 0.00 0.00 0.00 12.22 58 60 6.27 1.11 0.24 0.00 0.00 0.00 13.55 However, delta_platform() is missing for forked program and causes bogus SysWatt reporting, $ sudo turbostat -S -q --show power sleep 1 1.004736 sec CoreTmp PkgTmp PkgWatt CorWatt GFXWatt RAMWatt PKG_% RAM_% SysWatt 57 58 6.05 1.02 0.16 0.00 0.00 0.00 0.03 Add missing delta_platform() for forked program. Fixes: e5f687b89bc2 ("tools/power turbostat: Add RAPL psys as a built-in counter") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-08tools/power turbostat: Handle cap_get_proc() ENOSYSCalvin Owens1-1/+9
Kernels configured with CONFIG_MULTIUSER=n have no cap_get_proc(). Check for ENOSYS to recognize this case, and continue on to attempt to access the requested MSRs (such as temperature). Signed-off-by: Calvin Owens <calvin@wbinvd.org> Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-08tools/power turbostat: Fix build with muslCalvin Owens1-0/+1
turbostat.c: In function 'parse_int_file': turbostat.c:5567:19: error: 'PATH_MAX' undeclared (first use in this function) 5567 | char path[PATH_MAX]; | ^~~~~~~~ turbostat.c: In function 'probe_graphics': turbostat.c:6787:19: error: 'PATH_MAX' undeclared (first use in this function) 6787 | char path[PATH_MAX]; | ^~~~~~~~ Signed-off-by: Calvin Owens <calvin@wbinvd.org> Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-08tools/power turbostat: verify arguments to params --show and --hideLen Brown1-2/+31
$ sudo turbostat --quiet --show junk turbostat: Counter 'junk' can not be added. Previously, invalid arguments to --show and --hide were silently ignored Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-08io_uring/memmap: cast nr_pages to size_t before shiftingJens Axboe1-1/+1
If the allocated size exceeds UINT_MAX, then it's necessary to cast the mr->nr_pages value to size_t to prevent it from overflowing. In practice this isn't much of a concern as the required memory size will have been validated upfront, and accounted to the user. And > 4GB sizes will be necessary to make the lack of a cast a problem, which greatly exceeds normal user locked_vm settings that are generally in the kb to mb range. However, if root is used, then accounting isn't done, and then it's possible to hit this issue. Link: https://lore.kernel.org/all/6895b298.050a0220.7f033.0059.GAE@google.com/ Cc: stable@vger.kernel.org Reported-by: syzbot+23727438116feb13df15@syzkaller.appspotmail.com Fixes: 087f997870a9 ("io_uring/memmap: implement mmap for regions") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-08-07mailbox/pcc: support mailbox management of the shared bufferAdam Young2-4/+127
Define a new, optional, callback that allows the driver to specify how the return data buffer is allocated. If that callback is set, mailbox/pcc.c is now responsible for reading from and writing to the PCC shared buffer. This also allows for proper checks of the Commnand complete flag between the PCC sender and receiver. For Type 4 channels, initialize the command complete flag prior to accepting messages. Since the mailbox does not know what memory allocation scheme to use for response messages, the client now has an optional callback that allows it to allocate the buffer for a response message. When an outbound message is written to the buffer, the mailbox checks for the flag indicating the client wants an tx complete notification via IRQ. Upon receipt of the interrupt It will pair it with the outgoing message. The expected use is to free the kernel memory buffer for the previous outgoing message. Signed-off-by: Adam Young <admiyo@os.amperecomputing.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
2025-08-07smb: server: Fix extension string in ksmbd_extract_shortname()Thorsten Blum1-1/+1
In ksmbd_extract_shortname(), strscpy() is incorrectly called with the length of the source string (excluding the NUL terminator) rather than the size of the destination buffer. This results in "__" being copied to 'extension' rather than "___" (two underscores instead of three). Use the destination buffer size instead to ensure that the string "___" (three underscores) is copied correctly. Cc: stable@vger.kernel.org Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-08-07ksmbd: limit repeated connections from clients with the same IPNamjae Jeon2-0/+18
Repeated connections from clients with the same IP address may exhaust the max connections and prevent other normal client connections. This patch limit repeated connections from clients with the same IP. Reported-by: tianshuo han <hantianshuo233@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-08-07smb: client: only use a single wait_queue to monitor smbdirect connection statusStefan Metzmacher2-11/+9
There's no need for separate conn_wait and disconn_wait queues. This will simplify the move to common code, the server code already a single wait_queue for this. Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-08-07smb: client: don't call init_waitqueue_head(&info->conn_wait) twice in ↵Stefan Metzmacher1-1/+0
_smbd_get_connection It is already called long before we may hit this cleanup code path. Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-08-07smb: client: improve logging in smbd_conn_upcall()Stefan Metzmacher1-4/+10
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-08-07smb: client: return an error if rdma_connect does not return within 5 secondsStefan Metzmacher1-2/+4
This matches the timeout for tcp connections. Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: f198186aa9bb ("CIFS: SMBD: Establish SMB Direct connection") Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-08-07PCI: vmd: Fix wrong kfree() in vmd_msi_free()Nam Cao1-1/+3
vmd_msi_alloc() allocates struct vmd_irq and stashes it into irq_data->chip_data associated with the VMD's interrupt domain. vmd_msi_free() extracts the pointer by calling irq_get_chip_data() and frees it. irq_get_chip_data() returns the chip_data associated with the top interrupt domain. This worked in the past because VMD's interrupt domain was the top domain. But d7d8ab87e3e7 ("PCI: vmd: Switch to msi_create_parent_irq_domain()") changed the interrupt domain hierarchy so VMD's interrupt domain is not the top domain anymore. irq_get_chip_data() now returns the chip_data at the MSI devices' interrupt domains. It is therefore broken for vmd_msi_free() to kfree() this chip_data. Fix by extracting the chip_data associated with the VMD's interrupt domain. Fixes: d7d8ab87e3e7 ("PCI: vmd: Switch to msi_create_parent_irq_domain()") Reported-by: Kenneth Crudup <kenny@panix.com> Closes: https://lore.kernel.org/linux-pci/dfa40e48-8840-4e61-9fda-25cdb3ad81c1@panix.com/ Reported-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Closes: https://lore.kernel.org/linux-pci/ed53280ed15d1140700b96cca2734bf327ee92539e5eb68e80f5bbbf0f01@linux.gnuweeb.org/ Tested-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Tested-by: Kenneth Crudup <kenny@panix.com> Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com> Acked-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/20250807081051.2253962-1-namcao@linutronix.de
2025-08-07perf bpf-filter: Enable events manuallyIlya Leoshkevich1-1/+4
On s390, and, in general, on all platforms where the respective event supports auxiliary data gathering, the command: # ./perf record -u 0 -aB --synth=no -- ./perf test -w thloop [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.011 MB perf.data ] # ./perf report --stats | grep SAMPLE # does not generate samples in the perf.data file. On x86 the command: # sudo perf record -e intel_pt// -u 0 ls is broken too. Looking at the sequence of calls in 'perf record' reveals this behavior: 1. The event 'cycles' is created and enabled: record__open() +-> evlist__apply_filters() +-> perf_bpf_filter__prepare() +-> bpf_program.attach_perf_event() +-> bpf_program.attach_perf_event_opts() +-> __GI___ioctl(..., PERF_EVENT_IOC_ENABLE, ...) The event 'cycles' is enabled and active now. However the event's ring-buffer to store the samples generated by hardware is not allocated yet. 2. The event's fd is mmap()ed to create the ring buffer: record__open() +-> record__mmap() +-> record__mmap_evlist() +-> evlist__mmap_ex() +-> perf_evlist__mmap_ops() +-> mmap_per_cpu() +-> mmap_per_evsel() +-> mmap__mmap() +-> perf_mmap__mmap() +-> mmap() This allocates the ring buffer for the event 'cycles'. With mmap() the kernel creates the ring buffer: perf_mmap(): kernel function to create the event's ring | buffer to save the sampled data. | +-> ring_buffer_attach(): Allocates memory for ring buffer. | The PMU has auxiliary data setup function. The | has_aux(event) condition is true and the PMU's | stop() is called to stop sampling. It is not | restarted: | | if (has_aux(event)) | perf_event_stop(event, 0); | +-> cpumsf_pmu_stop(): Hardware sampling is stopped. No samples are generated and saved anymore. 3. After the event 'cycles' has been mapped, the event is enabled a second time in: __cmd_record() +-> evlist__enable() +-> __evlist__enable() +-> evsel__enable_cpu() +-> perf_evsel__enable_cpu() +-> perf_evsel__run_ioctl() +-> perf_evsel__ioctl() +-> __GI___ioctl(., PERF_EVENT_IOC_ENABLE, .) The second ioctl(fd, PERF_EVENT_IOC_ENABLE, 0); is just a NOP in this case. The first invocation in (1.) sets the event::state to PERF_EVENT_STATE_ACTIVE. The kernel functions perf_ioctl() +-> _perf_ioctl() +-> _perf_event_enable() +-> __perf_event_enable() return immediately because event::state is already set to PERF_EVENT_STATE_ACTIVE. This happens on s390, because the event 'cycles' offers the possibility to save auxilary data. The PMU callbacks setup_aux() and free_aux() are defined. Without both callback functions, cpumsf_pmu_stop() is not invoked and sampling continues. To remedy this, remove the first invocation of ioctl(..., PERF_EVENT_IOC_ENABLE, ...). in step (1.) Create the event in step (1.) and enable it in step (3.) after the ring buffer has been mapped. Output after: # ./perf record -aB --synth=no -u 0 -- ./perf test -w thloop 2 [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 0.876 MB perf.data ] # ./perf report --stats | grep SAMPLE SAMPLE events: 16200 (99.5%) SAMPLE events: 16200 # The software event succeeded both before and after the patch: # ./perf record -e cpu-clock -aB --synth=no -u 0 -- \ ./perf test -w thloop 2 [ perf record: Woken up 7 times to write data ] [ perf record: Captured and wrote 2.870 MB perf.data ] # ./perf report --stats | grep SAMPLE SAMPLE events: 53506 (99.8%) SAMPLE events: 53506 # Fixes: b4c658d4d63d61 ("perf target: Remove uid from target") Suggested-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Co-developed-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20250806162417.19666-3-iii@linux.ibm.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-08-07libbpf: Add the ability to suppress perf event enablementIlya Leoshkevich2-6/+11
Automatically enabling a perf event after attaching a BPF prog to it is not always desirable. Add a new "dont_enable" field to struct bpf_perf_event_opts. While introducing "enable" instead would be nicer in that it would avoid a double negation in the implementation, it would make DECLARE_LIBBPF_OPTS() less efficient. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Suggested-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Co-developed-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20250806162417.19666-2-iii@linux.ibm.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-08-07pptp: fix pptp_xmit() error pathEric Dumazet1-3/+4
I accidentally added a bug in pptp_xmit() that syzbot caught for us. Only call ip_rt_put() if a route has been allocated. BUG: unable to handle page fault for address: ffffffffffffffdb PGD df3b067 P4D df3b067 PUD df3d067 PMD 0 Oops: Oops: 0002 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 6346 Comm: syz.0.336 Not tainted 6.16.0-next-20250804-syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:arch_atomic_add_return arch/x86/include/asm/atomic.h:85 [inline] RIP: 0010:raw_atomic_sub_return_release include/linux/atomic/atomic-arch-fallback.h:846 [inline] RIP: 0010:atomic_sub_return_release include/linux/atomic/atomic-instrumented.h:327 [inline] RIP: 0010:__rcuref_put include/linux/rcuref.h:109 [inline] RIP: 0010:rcuref_put+0x172/0x210 include/linux/rcuref.h:173 Call Trace: <TASK> dst_release+0x24/0x1b0 net/core/dst.c:167 ip_rt_put include/net/route.h:285 [inline] pptp_xmit+0x14b/0x1a90 drivers/net/ppp/pptp.c:267 __ppp_channel_push+0xf2/0x1c0 drivers/net/ppp/ppp_generic.c:2166 ppp_channel_push+0x123/0x660 drivers/net/ppp/ppp_generic.c:2198 ppp_write+0x2b0/0x400 drivers/net/ppp/ppp_generic.c:544 vfs_write+0x27b/0xb30 fs/read_write.c:684 ksys_write+0x145/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: de9c4861fb42 ("pptp: ensure minimal skb length in pptp_xmit()") Reported-by: syzbot+27d7cfbc93457e472e00@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/689095a5.050a0220.1fc43d.0009.GAE@google.com/ Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250807142146.2877060-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-07lib/sbitmap: make sbitmap_get_shallow() internalYu Kuai2-19/+16
Because it's only used in sbitmap.c Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20250807032413.1469456-3-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-08-07lib/sbitmap: convert shallow_depth from one word to the whole sbitmapYu Kuai6-73/+52
Currently elevators will record internal 'async_depth' to throttle asynchronous requests, and they both calculate shallow_dpeth based on sb->shift, with the respect that sb->shift is the available tags in one word. However, sb->shift is not the availbale tags in the last word, see __map_depth: if (index == sb->map_nr - 1) return sb->depth - (index << sb->shift); For consequence, if the last word is used, more tags can be get than expected, for example, assume nr_requests=256 and there are four words, in the worst case if user set nr_requests=32, then the first word is the last word, and still use bits per word, which is 64, to calculate async_depth is wrong. One the ohter hand, due to cgroup qos, bfq can allow only one request to be allocated, and set shallow_dpeth=1 will still allow the number of words request to be allocated. Fix this problems by using shallow_depth to the whole sbitmap instead of per word, also change kyber, mq-deadline and bfq to follow this, a new helper __map_depth_with_shallow() is introduced to calculate available bits in each word. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20250807032413.1469456-2-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-08-07nvmet: exit debugfs after discovery subsystem exitsMohamed Khalfella1-1/+1
Commit 528589947c180 ("nvmet: initialize discovery subsys after debugfs is initialized") changed nvmet_init() to initialize nvme discovery after "nvmet" debugfs directory is initialized. The change broke nvmet_exit() because discovery subsystem now depends on debugfs. Debugfs should be destroyed after discovery subsystem. Fix nvmet_exit() to do that. Reported-by: Yi Zhang <yi.zhang@redhat.com> Closes: https://lore.kernel.org/all/CAHj4cs96AfFQpyDKF_MdfJsnOEo=2V7dQgqjFv+k3t7H-=yGhA@mail.gmail.com/ Fixes: 528589947c180 ("nvmet: initialize discovery subsys after debugfs is initialized") Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Link: https://lore.kernel.org/r/20250807053507.2794335-1-mkhalfella@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-08-07treewide: rename GPIO set callbacks back to their original namesBartosz Golaszewski282-356/+355
The conversion of all GPIO drivers to using the .set_rv() and .set_multiple_rv() callbacks from struct gpio_chip (which - unlike their predecessors - return an integer and allow the controller drivers to indicate failures to users) is now complete and the legacy ones have been removed. Rename the new callbacks back to their original names in one sweeping change. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-08-07gpio: remove legacy GPIO line value setter callbacksBartosz Golaszewski2-28/+6
With no more users of the legacy GPIO line value setters - .set() and .set_multiple() - we can now remove them from the kernel. Link: https://lore.kernel.org/r/20250725074651.14002-1-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-08-07ALSA: hda/cirrus: Restrict prompt only for CONFIG_EXPERTTakashi Iwai1-8/+12
The split of Cirrus HD-audio codec driver may confuse users when migrating from the previous kernel configs and leave the needed drivers disabled. Although we've already set y as default, it's still safer to paper over the wrong choices. This patch marks the prompt of split CS420x and CS421x codec drivers with CONFIG_EXPERT, so that they are all enabled when the top-level CONFIG_SND_HDA_CODEC_CIRRUS is set. For users who really care about the minimalistic configuration, they can turn each driver on/off individually after setting CONFIG_EXPERT=y. This patch adds the missing help text to the top-level CONFIG_SND_HDA_CIRRUS_CODEC together with the explanation of individual choices, and corrects the help texts that don't fit well nowadays, too. Fixes: 1cb8744a36c7 ("ALSA: hda/cirrus: Split to cs420x and cs421x drivers") Link: https://lore.kernel.org/10172c80-daec-4e20-ab57-a483cf1afc02@molgen.mpg.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250806192541.21949-4-tiwai@suse.de
2025-08-07ALSA: hda/hdmi: Restrict prompt only for CONFIG_EXPERTTakashi Iwai1-7/+13
The split of HDMI codec driver may confuse users when migrating from the previous kernel configs and leave some drivers disabled unexpectedly. Although we've already set y to all HDMI codec drivers as default, it's still safer to paper over the wrong choices. This patch marks the prompt of each HDMI codec driver with CONFIG_EXPERT, so that they are all enabled when the top-level CONFIG_SND_HDA_CODEC_HDMI is set. For users who really care about the minimalistic configuration, they can turn each driver on/off individually after setting CONFIG_EXPERT=y. The patch also adds the missing help text to the top-level CONFIG_SND_HDA_CODEC_HDMI together with the explanation of individual choices, too. Fixes: 73cd0490819d ("ALSA: hda/hdmi: Split vendor codec drivers") Link: https://lore.kernel.org/10172c80-daec-4e20-ab57-a483cf1afc02@molgen.mpg.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250806192541.21949-3-tiwai@suse.de
2025-08-07ALSA: hda/realtek: Restrict prompt only for CONFIG_EXPERTTakashi Iwai1-12/+16
The split of Realtek HD-audio codec driver may cause confusions especially when migrating from the previous kernel configurations because it's hard to know which driver to be enabled. Although we've already set default=y for those codec drivers, it may still make people changing the stuff unnecessarily without knowing its side effect. This patch is for avoiding such pitfalls by marking the prompt of each Realtek codec driver with CONFIG_EXPERT. For "normal" users (that is, unless CONFIG_EXPERT is set), all Realtek HD-audio codecs are enabled together with CONFIG_SND_HDA_CODEC_REALTEK; this is the very same situation like the previous kernels, after all. For users who really care about the minimalistic configuration, they can turn each driver on/off individually after setting CONFIG_EXPERT=y. The patch also adds the missing help text to the top-level CONFIG_SND_HDA_CODEC_REALTEK together with the explanation of individual choices, too. Fixes: aeeb85f26c3b ("ALSA: hda: Split Realtek HD-audio codec driver") Link: https://lore.kernel.org/10172c80-daec-4e20-ab57-a483cf1afc02@molgen.mpg.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250806192541.21949-2-tiwai@suse.de
2025-08-06drm/amdgpu: add missing vram lost check for LEGACY RESETAlex Deucher1-0/+1
Legacy resets reset the memory controllers so VRAM contents may be unreliable after reset. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit aae94897b6661a2a4b1de2d328090fc388b3e0af) Cc: stable@vger.kernel.org
2025-08-06drm/amdgpu/discovery: fix fw based ip discoveryAlex Deucher2-36/+41
We only need the fw based discovery table for sysfs. No need to parse it. Additionally parsing some of the board specific tables may result in incorrect data on some boards. just load the binary and don't parse it on those boards. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4441 Fixes: 80a0e8282933 ("drm/amdgpu/discovery: optionally use fw based ip discovery") Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 62eedd150fa11aefc2d377fc746633fdb1baeb55) Cc: stable@vger.kernel.org
2025-08-06drm/amdkfd: Destroy KFD debugfs after destroy KFD wqAmber Lin1-1/+1
Since KFD proc content was moved to kernel debugfs, we can't destroy KFD debugfs before kfd_process_destroy_wq. Move kfd_process_destroy_wq prior to kfd_debugfs_fini to fix a kernel NULL pointer problem. It happens when /sys/kernel/debug/kfd was already destroyed in kfd_debugfs_fini but kfd_process_destroy_wq calls kfd_debugfs_remove_process. This line debugfs_remove_recursive(entry->proc_dentry); tries to remove /sys/kernel/debug/kfd/proc/<pid> while /sys/kernel/debug/kfd is already gone. It hangs the kernel by kernel NULL pointer. Signed-off-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Eric Huang <jinhuieric.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 0333052d90683d88531558dcfdbf2525cc37c233) Cc: stable@vger.kernel.org
generated by cgit v1.2.3 (git 2.39.1) at 2025-12-26 20:12:55 +0000