| Age | Commit message (Collapse) | Author | Files | Lines |
|
A lot of drivers only care about enabling the regulator for as long as
the underlying Device is bound. This can be easily observed due to the
extensive use of `devm_regulator_get_enable` and
`devm_regulator_get_enable_optional` throughout the kernel.
Therefore, make this helper available in Rust. Also add an example
noting how it should be the default API unless the driver needs more
fine-grained control over the regulator.
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://patch.msgid.link/20250910-regulator-remove-dynamic-v3-2-07af4dfa97cc@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After some experimenting and further discussion, it is starting to look
like Regulator<Dynamic> might be a footgun. It turns out that one can
get the same behavior by correctly using just Regulator<Enabled> and
Regulator<Disabled>, so there is no need to directly expose the manual
refcounting ability of Regulator<Dynamic> to clients.
Remove it while we do not have any other users.
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://patch.msgid.link/20250910-regulator-remove-dynamic-v3-1-07af4dfa97cc@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduces the concept of a `ScopedDir`, which allows for the creation
of debugfs directories and files that are tied to the lifetime of a
particular data structure. This ensures that debugfs entries do not
outlive the data they refer to.
The new `Dir::scope` method creates a new directory that is owned by a
`Scope` handle. All files and subdirectories created within this scope
are automatically cleaned up when the `Scope` is dropped.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250904-debugfs-rust-v11-6-7d12a165685a@google.com
[ Fix up Result<(), Error> -> Result; fix spurious backtick in
doc-comment. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Extends the `debugfs` API to support creating files with content
generated and updated by callbacks. This is done via the
`read_callback_file`, `write_callback_file`, and
`read_write_callback_file` methods.
These methods allow for more flexible file definition, either because
the type already has a `Writer` or `Reader` method that doesn't
do what you'd like, or because you cannot implement it (e.g. because
it's a type defined in another crate or a primitive type).
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250904-debugfs-rust-v11-4-7d12a165685a@google.com
[ Fix up Result<(), Error> -> Result. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Extends the `debugfs` API to support creating writable files. This
is done via the `Dir::write_only_file` and `Dir::read_write_file`
methods, which take a data object that implements the `Reader`
trait.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250904-debugfs-rust-v11-3-7d12a165685a@google.com
[ Fix up Result<()> -> Result. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Extends the `debugfs` API to support creating read-only files. This
is done via the `Dir::read_only_file` method, which takes a data object
that implements the `Writer` trait.
The file's content is generated by the `Writer` implementation, and the
file is automatically removed when the returned `File` handle is
dropped.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250904-debugfs-rust-v11-2-7d12a165685a@google.com
[ Fixup build failure when CONFIG_DEBUGFS=n. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Adds a `debugfs::Dir` type that can be used to create and remove
DebugFS directories. The `Dir` handle automatically cleans up the
directory on `Drop`.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250904-debugfs-rust-v11-1-7d12a165685a@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
We need the DRM Rust changes that went into drm-misc before the
existence of the drm-rust tree in here as well.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Core functions like `to_result` should have good documentation.
Thus improve it, including adding an example of how to perform early
returns with it.
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This constructor is public since commit 5ed147473458 ("rust: error:
make conversion functions public"), and we will refer to it from the
documentation of `to_result` in a later commit.
Thus improve its documentation, including adding examples.
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Drive-by fix, it doesn't seem like anything actually uses this constant
anymore.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250908185239.135849-4-lyude@redhat.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
Just to reduce the clutter with the File<…> types in gem.rs.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250908185239.135849-3-lyude@redhat.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
Now that my rust skills have been honed, I noticed that there's a lot of
generics in our gem bindings that don't actually need to be here. Currently
the hierarchy of traits in our gem bindings looks like this:
* Drivers implement:
* BaseDriverObject<T: DriverObject> (has the callbacks)
* DriverObject (has the drm::Driver type)
* Crate implements:
* IntoGEMObject for Object<T> where T: DriverObject
Handles conversion to/from raw object pointers
* BaseObject for T where T: IntoGEMObject
Provides methods common to all gem interfaces
Also of note, this leaves us with two different drm::Driver associated
types:
* DriverObject::Driver
* IntoGEMObject::Driver
I'm not entirely sure of the original intent here unfortunately (if anyone
is, please let me know!), but my guess is that the idea would be that some
objects can implement IntoGEMObject using a different ::Driver than
DriverObject - presumably to enable the usage of gem objects from different
drivers. A reasonable usecase of course.
However - if I'm not mistaken, I don't think that this is actually how
things would go in practice. Driver implementations are of course
implemented by their associated drivers, and generally drivers are not
linked to each-other when building the kernel. Which is to say that even in
a situation where we would theoretically deal with gem objects from another
driver, we still wouldn't have access to its drm::driver::Driver
implementation. It's more likely we would simply want a variant of gem
objects in such a situation that have no association with a
drm::driver::Driver type.
Taking that into consideration, we can assume the following:
* Anything that implements BaseDriverObject will implement DriverObject
In other words, all BaseDriverObjects indirectly have an associated
::Driver type - so the two traits can be combined into one with no
generics.
* Not everything that implements IntoGEMObject will have an associated
::Driver, and that's OK.
And with this, we now can do quite a bit of cleanup with the use of
generics here. As such, this commit:
* Removes the generics on BaseDriverObject
* Moves DriverObject::Driver into BaseDriverObject
* Removes DriverObject
* Removes IntoGEMObject::Driver
* Add AllocImpl::Driver, which we can use as a binding to figure out the
correct File type for BaseObject
Leaving us with a simpler trait hierarchy that now looks like this:
* Drivers implement: BaseDriverObject
* Crate implements:
* IntoGEMObject for Object<T> where T: DriverObject
* BaseObject for T where T: IntoGEMObject
Which makes the code a lot easier to understand and build on :).
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250908185239.135849-2-lyude@redhat.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
`pin_init::zeroed()`
All types in `bindings` implement `Zeroable` if they can, so use
`pin_init::zeroed` instead of relying on `unsafe` code.
If this ends up not compiling in the future, something in bindgen or on
the C side changed and is most likely incorrect.
Signed-off-by: Benno Lossin <lossin@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Update call sites in `task.rs` to import `ARef` and
`AlwaysRefCounted` from `sync::aref` instead of `types`.
This aligns with the ongoing effort to move `ARef` and
`AlwaysRefCounted` to sync.
Suggested-by: Benno Lossin <lossin@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1173
Signed-off-by: Shankari Anand <shankari.ak0208@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Rust 1.80.0 added:
align_of
align_of_val
size_of
size_of_val
from `core::mem` to the prelude [1].
For similar reasons, and to minimize potential confusion when code may
work in later versions but not in our current minimum, add it to our
prelude too.
Link: https://github.com/rust-lang/rust/pull/123168 [1]
Link: https://lore.kernel.org/rust-for-linux/CANiq72kOLYR2A95o0ji2mDmEqOKh9e9_60zZKmgF=vZmsW6DRg@mail.gmail.com/ [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The error codes come from several headers.
Thus, add the other header links.
Signed-off-by: Onur Özkan <work@onurozkan.dev>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
[ Sorted headers. Added line breaks. Reworded commit message. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
These `srctree/` links pointed inside `linux/`, but they are directly
under `drm/`.
Thus fix them.
This cleans a future warning that will check our `srctree/` links.
Cc: stable@vger.kernel.org
Fixes: a98a73be9ee9 ("rust: drm: file: Add File abstraction")
Fixes: c284d3e42338 ("rust: drm: gem: Add GEM object abstraction")
Fixes: 07c9016085f9 ("rust: drm: add driver abstractions")
Fixes: 1e4b8896c0f3 ("rust: drm: add device abstraction")
Fixes: 9a69570682b1 ("rust: drm: ioctl: Add DRM ioctl abstraction")
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This `srctree/` link pointed to a file with an underscore, but the header
used a dash instead.
Thus fix it.
This cleans a future warning that will check our `srctree/` links.
Cc: stable@vger.kernel.org
Fixes: 3253aba3408a ("rust: block: introduce `kernel::block::mq` module")
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Update the in-file reference of sync/aref.rs to import `ARef` and
`AlwaysRefCounted` from `sync::aref` instead of `types`.
This aligns with the ongoing effort to move `ARef` and
`AlwaysRefCounted` to sync.
Suggested-by: Benno Lossin <lossin@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1173
Signed-off-by: Shankari Anand <shankari.ak0208@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
https://github.com/Rust-for-Linux/linux into rust-next
Pull alloc and DMA updates from Danilo Krummrich:
Allocator:
- Provide information about the minimum alignment guarantees of
'Kmalloc', 'Vmalloc' and 'KVmalloc'.
- Take minimum alignment guarantees of allocators for
'ForeignOwnable' into account.
- Remove the 'allocator_test' incl. 'Cmalloc'.
Box:
- Implement 'Box::pin_slice()', which constructs a pinned slice of
elements.
Vec:
- Simplify KUnit test module name to 'rust_kvec'.
- Add doc-test for 'Vec::as_slice()'.
- Constify various methods.
DMA:
- Update 'ARef' and 'AlwaysRefCounted' imports.
MISC:
- Remove support for unused host '#[test]'s.
- Constify 'ArrayLayout::new_unchecked()'.
* tag 'alloc-next-v6.18-2025-09-04' of https://github.com/Rust-for-Linux/linux:
rust: alloc: remove `allocator_test`
rust: kernel: remove support for unused host `#[test]`s
rust: alloc: implement Box::pin_slice()
rust: alloc: add ARCH_KMALLOC_MINALIGN to bindgen blocklist
rust: dma: Update ARef and AlwaysRefCounted imports from sync::aref
rust: alloc: take the allocator into account for FOREIGN_ALIGN
rust: alloc: specify the minimum alignment of each allocator
rust: make `kvec::Vec` functions `const fn`
rust: make `ArrayLayout::new_unchecked` a `const fn`
rust: alloc: kvec: simplify KUnit test module name to "rust_kvec"
rust: alloc: kvec: add doc example for as_slice method
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
- Two changes to prepare for the future Rust 1.91.0 release (expected
2025-10-30, currently in nightly): a target specification format
change and a renamed, soon-to-be-stabilized 'core' function.
* tag 'rust-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: support Rust >= 1.91.0 target spec
rust: use the new name Location::file_as_c_str() in Rust >= 1.91.0
|
|
Alice Ryhl <aliceryhl@google.com> says:
This series adds support for the `struct iov_iter` type. This type
represents an IO buffer for reading or writing, and can be configured
for either direction of communication.
In Rust, we define separate types for reading and writing. This will
ensure that you cannot mix them up and e.g. call copy_from_iter in a
read_iter syscall.
To use the new abstractions, miscdevices are given new methods read_iter
and write_iter that can be used to implement the read/write syscalls on
a miscdevice. The miscdevice sample is updated to provide read/write
operations.
Intended for Greg's miscdevice tree.
Link: https://lore.kernel.org/r/20250822-iov-iter-v5-0-6ce4819c2977@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
structures
These will be used for the read_iter() and write_iter() callbacks, which
are now the preferred back-ends for when a user operates on a char device
with read() and write() respectively.
Co-developed-by: Lee Jones <lee@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250822-iov-iter-v5-4-6ce4819c2977@google.com
|
|
This adds a very simple Kiocb struct that lets you access the inner
file's private data and the file position. For now, nothing else is
supported.
Cc: Christian Brauner <brauner@kernel.org>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250822-iov-iter-v5-3-6ce4819c2977@google.com
|
|
This adds abstractions for the iov_iter type in the case where
data_source is ITER_DEST. This will make Rust implementations of
fops->read_iter possible.
This series only has support for using existing IO vectors created by C
code. Additional abstractions will be needed to support the creation of
IO vectors in Rust code.
These abstractions make the assumption that `struct iov_iter` does not
have internal self-references, which implies that it is valid to move it
between different local variables.
This patch adds an IovIterDest struct that is very similar to the
IovIterSource from the previous patch. However, as the methods on the
two structs have very little overlap (just getting the length and
advance/revert), I do not think it is worth it to try and deduplicate
this logic.
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250822-iov-iter-v5-2-6ce4819c2977@google.com
|
|
This adds abstractions for the iov_iter type in the case where
data_source is ITER_SOURCE. This will make Rust implementations of
fops->write_iter possible.
This series only has support for using existing IO vectors created by C
code. Additional abstractions will be needed to support the creation of
IO vectors in Rust code.
These abstractions make the assumption that `struct iov_iter` does not
have internal self-references, which implies that it is valid to move it
between different local variables.
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250822-iov-iter-v5-1-6ce4819c2977@google.com
|
|
Merge series from Woodrow Douglass <wdouglass@carnegierobotics.com>:
I wrote this driver to read settings and state from the nxp pf530x
regulator. Please consider it for inclusion, any criticism is welcome.
|
|
Add a safe Rust abstraction for the kernel's scatter-gather list
facilities (`struct scatterlist` and `struct sg_table`).
This commit introduces `SGTable<T>`, a wrapper that uses a generic
parameter to provide compile-time guarantees about ownership and lifetime.
The abstraction provides two primary states:
- `SGTable<Owned<P>>`: Represents a table whose resources are fully
managed by Rust. It takes ownership of a page provider `P`, allocates
the underlying `struct sg_table`, maps it for DMA, and handles all
cleanup automatically upon drop. The DMA mapping's lifetime is tied to
the associated device using `Devres`, ensuring it is correctly unmapped
before the device is unbound.
- `SGTable<Borrowed>` (or just `SGTable`): A zero-cost representation of
an externally managed `struct sg_table`. It is created from a raw
pointer using `SGTable::from_raw()` and provides a lifetime-bound
reference (`&'a SGTable`) for operations like iteration.
The API exposes a safe iterator that yields `&SGEntry` references,
allowing drivers to easily access the DMA address and length of each
segment in the list.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Co-developed-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Link: https://lore.kernel.org/r/20250828133323.53311-4-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add a type alias for bindings::dma_addr_t (DmaAddress), such that we do
not have to access bindings directly.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250828133323.53311-3-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add the `DataDirection` struct, a newtype wrapper around the C
`enum dma_data_direction`.
This provides a type-safe Rust interface for specifying the direction of
DMA transfers.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250828133323.53311-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Implement AsPageIter for VVec; this allows to iterate and borrow the
backing pages of a VVec. This, for instance, is useful in combination
with VVec backing a scatterlist.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250820145434.94745-8-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Provide a convenience method for ArrayLayout to calculate the size of
the ArrayLayout in bytes.
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Link: https://lore.kernel.org/r/20250820145434.94745-7-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Implement AsPageIter for VBox; this allows to iterate and borrow the
backing pages of a VBox. This, for instance, is useful in combination
with VBox backing a scatterlist.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250820145434.94745-6-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The AsPageIter trait provides a common interface for types that
provide a page iterator, such as VmallocPageIter.
Subsequent patches will leverage this to let VBox and VVec provide a
VmallocPageIter though this trait.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250820145434.94745-5-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Introduce the VmallocPageIter type; an instance of VmallocPageIter may
be exposed by owners of vmalloc allocations to provide borrowed access
to its backing pages.
For instance, this is useful to access and borrow the backing pages of
allocation primitives, such as Box and Vec, backing a scatterlist.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250820145434.94745-4-dakr@kernel.org
[ Drop VmallocPageIter::base_address(), move to allocator/iter.rs and
stub VmallocPageIter for allocator_test.rs. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc5).
No conflicts.
Adjacent changes:
include/net/sock.h
c51613fa276f ("net: add sk->sk_drop_counters")
5d6b58c932ec ("net: lockless sock_i_ino()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge OPP (operating performance points) updates for 6.18 from Viresh
Kumar:
"- Add support to find OPP for a set of keys (Krishna Chaitanya Chundru).
- Minor optimization to OPP Rust implementation (Onur Özkan)."
* tag 'opp-updates-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
OPP: Add support to find OPP for a set of keys
rust: opp: use to_result for error handling
|
|
Implement an abstraction of vmalloc_to_page() for subsequent use in the
AsPageIter implementation of VBox and VVec.
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250820145434.94745-3-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Currently, a Page always owns the underlying struct page.
However, sometimes a struct page may be owned by some other entity, e.g.
a vmalloc allocation.
Hence, introduce BorrowedPage to support such cases, until the Ownable
solution [1] lands.
This is required by the scatterlist abstractions.
Acked-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/rust-for-linux/ZnCzLIly3DRK2eab@boqun-archlinux/ [1]
Link: https://lore.kernel.org/r/20250820145434.94745-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
While rvkms is only going to be using a few of these, since Deltas are
basically the same as i64 it's easy enough to just implement all of the
basic arithmetic operations for Delta types.
Keep in mind there's one quirk here - the kernel has no support for
i64 % i64 on 32 bit platforms, the closest we have is i64 % i32 through
div_s64_rem(). So, instead of implementing ops::Rem or ops::RemAssign we
simply provide Delta::rem_nanos().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250820203704.731588-3-lyude@redhat.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
|
|
In order to copy the behavior rust currently follows for basic arithmetic
operations and panic if the result of an addition or subtraction results in
a value that would violate the invariants of Instant, but only if the
kernel has overflow checking for rust enabled.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250820203704.731588-2-lyude@redhat.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
|
|
Add a simple callback for retrieving the current expiry time for an
HrTimer. In rvkms, we use the HrTimer expiry value in order to calculate
the approximate vblank timestamp during each emulated vblank interrupt.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250821193259.964504-8-lyude@redhat.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
|
|
For implementing Rust bindings which can return a point in time.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://lore.kernel.org/r/20250821193259.964504-7-lyude@redhat.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
|
|
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250821193259.964504-6-lyude@redhat.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
|
|
With Linux's hrtimer API, there's a number of methods that can only be
called in two situations:
* When we have exclusive access to the hrtimer and it is not currently
active
* When we're within the context of an hrtimer callback context
This commit handles the second situation and implements hrtimer_forward()
support in the context of a timer callback. We do this by introducing a
HrTimerCallbackContext type which is provided to users during the
RawHrTimerCallback::run() callback, and then add a forward() function to
the type.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250821193259.964504-5-lyude@redhat.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
|
|
Within the hrtimer API there are quite a number of functions that can only
be safely called from one of two contexts:
* When we have exclusive access to the hrtimer and the timer is not active.
* When we're within the hrtimer's callback context as it is being executed.
This commit adds bindings for hrtimer_forward() for the first such context,
along with HrTimer::raw_forward() for later use in implementing the
hrtimer_forward() in the latter context.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250821193259.964504-4-lyude@redhat.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
|
|
Since we want to add HrTimer methods that can accept Instants, we will want
to make sure that for each method we are using the correct Clocksource for
the given HrTimer. This would get a bit overly-verbose, so add a simple
HrTimerInstant type-alias to handle this for us.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250821193259.964504-3-lyude@redhat.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
|
|
Just a drive-by fix I noticed: we don't actually document what the return
value from cancel() does, so do that.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250821193259.964504-2-lyude@redhat.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
|
|
Simplifies error handling by replacing the manual check
of the return value with the `to_result` helper.
Signed-off-by: Onur Özkan <work@onurozkan.dev>
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Link: https://patch.msgid.link/20250821091235.800-1-work@onurozkan.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|