aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/exported-sql-viewer.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2023-05-24dmaengine: plx_dma: Don't set chancntJisheng Zhang1-1/+0
The dma framework will calculate the dma channels chancnt, setting it ourself is wrong. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20230521100252.3197-4-jszhang@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-24dmaengine: axi-dmac: Don't set chancntJisheng Zhang1-1/+0
The dma framework will calculate the dma channels chancnt, setting it ourself is wrong. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230521100252.3197-3-jszhang@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-24dmaengine: dw-axi-dmac: Don't set chancntJisheng Zhang1-1/+0
The dma framework will calculate the dma channels chancnt, setting it ourself is wrong. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Link: https://lore.kernel.org/r/20230521100252.3197-2-jszhang@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-24dmaengine: qcom: bam_dma: allow omitting num-{channels,ees}Stephan Gerhold1-9/+9
The bam_dma driver needs to know the number of channels and execution environments (EEs) at probe time. If we are in full control of the BAM controller this information can be obtained from the BAM identification registers (BAM_REVISION/BAM_NUM_PIPES). When the BAM is "controlled remotely" it is more complicated. The BAM might not be on at probe time, so reading the registers could fail. This is why the information must be added to the device tree in this case, using "num-channels" and "qcom,num-ees". However, there are also some BAM instances that are initialized by something else but we still have a clock that allows to turn it on when needed. This can be set up in the DT with "qcom,controlled-remotely" and "clocks" and is already supported by the bam_dma driver. Examples for this are the typical BLSP BAM instances on older SoCs, QPIC BAM (for NAND) and the crypto BAM on some SoCs. In this case, there is no need to read "num-channels" and "qcom,num-ees" from the DT. The BAN can be turned on using the clock so we can just read it from the BAM registers like in the normal case. Check for the BAM clock earlier and skip reading "num-channels" and "qcom,num-ees" if it is present to allow simplifying the DT description a bit. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20230518-bamclk-dt-v2-1-a1a857b966ca@gerhold.net Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-24dmaengine: dw-edma: Add HDMA DebugFS supportCai Huoqing4-1/+196
Add HDMA DebugFS support to show registers content Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Tested-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20230520050854.73160-5-cai.huoqing@linux.dev Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-24dmaengine: dw-edma: Add support for native HDMACai Huoqing6-4/+450
Add support for HDMA NATIVE, as long the IP design has set the compatible register map parameter-HDMA_NATIVE, which allows compatibility for native HDMA register configuration. The HDMA Hyper-DMA IP is an enhancement of the eDMA embedded-DMA IP. And the native HDMA registers are different from eDMA, so this patch add support for HDMA NATIVE mode. HDMA write and read channels operate independently to maximize the performance of the HDMA read and write data transfer over the link When you configure the HDMA with multiple read channels, then it uses a round robin (RR) arbitration scheme to select the next read channel to be serviced.The same applies when you have multiple write channels. The native HDMA driver also supports a maximum of 16 independent channels (8 write + 8 read), which can run simultaneously. Both SAR (Source Address Register) and DAR (Destination Address Register) are aligned to byte. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Tested-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20230520050854.73160-4-cai.huoqing@linux.dev Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-24dmaengine: dw-edma: Create a new dw_edma_core_ops structure to abstract ↵Cai Huoqing4-82/+157
controller operation The structure dw_edma_core_ops has a set of the pointers abstracting out the DW eDMA vX and DW HDMA Native controllers. And use dw_edma_v0_core_register to set up operation. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Tested-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20230520050854.73160-3-cai.huoqing@linux.dev Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-24dmaengine: dw-edma: Rename dw_edma_core_ops structure to dw_edma_plat_opsCai Huoqing3-5/+5
The dw_edma_core_ops structure contains a set of the operations: device IRQ numbers getter, CPU/PCI address translation. Based on the functions semantics the structure name "dw_edma_plat_ops" looks more descriptive since indeed the operations are platform-specific. The "dw_edma_core_ops" name shall be used for a structure with the IP-core specific set of callbacks in order to abstract out DW eDMA and DW HDMA setups. Such structure will be added in one of the next commit in the framework of the set of changes adding the DW HDMA device support. Anyway the renaming was necessary to distinguish two types of the implementation callbacks: 1. DW eDMA/hDMA IP-core specific operations: device-specific CSR setups in one or another aspect of the DMA-engine initialization. 2. DW eDMA/hDMA platform specific operations: the DMA device environment configs like IRQs, address translation, etc. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Tested-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20230520050854.73160-2-cai.huoqing@linux.dev Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-19dmaengine: ste_dma40: use proper format string for resource_size_tArnd Bergmann1-2/+2
A fixup for a printk format string warning causes an out-of-bounds variable access as the %pR string expects a struct resource instead of a plain resource_size_t. Change both to the special %pap and %pap helpers for these types. Fixes: 5a1a3b9c19dd ("dmaengine: ste_dma40: Get LCPA SRAM from SRAM node") Fixes: ef1e1c41a11d ("dmaengine: ste_dma40: use correct print specfier for resource_size_t") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230519093447.4097040-1-arnd@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-18dmaengine: make QCOM_HIDMA depend on HAS_IOMEMBaoquan He1-0/+1
On s390 systems (aka mainframes), it has classic channel devices for networking and permanent storage that are currently even more common than PCI devices. Hence it could have a fully functional s390 kernel with CONFIG_PCI=n, then the relevant iomem mapping functions [including ioremap(), devm_ioremap(), etc.] are not available. Here let QCOM_HIDMA depend on HAS_IOMEM so that it won't be built to cause below compiling error if PCI is unset. -------------------------------------------------------- ld: drivers/dma/qcom/hidma.o: in function `hidma_probe': hidma.c:(.text+0x4b46): undefined reference to `devm_ioremap_resource' ld: hidma.c:(.text+0x4b9e): undefined reference to `devm_ioremap_resource' make[1]: *** [scripts/Makefile.vmlinux:35: vmlinux] Error 1 make: *** [Makefile:1264: vmlinux] Error 2 Signed-off-by: Baoquan He <bhe@redhat.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <andersson@kernel.org> Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: linux-arm-msm@vger.kernel.org Cc: dmaengine@vger.kernel.org Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@gmail.com> Link: https://lore.kernel.org/r/20230506111628.712316-3-bhe@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-18dmaengine: ste_dma40: fix typo in enum documentationVinod Koul1-1/+1
s/40_command/d40_command to fix the below warning reported: drivers/dma/ste_dma40.c:151: warning: expecting prototype for enum 40_command. Prototype was for enum d40_command instead Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20230517064434.141091-2-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-18dmaengine: ste_dma40: use correct print specfier for resource_size_tVinod Koul1-2/+2
We should use %pR for printing resource_size_t, so update that fixing the warning: drivers/dma/ste_dma40.c:3556:25: warning: format specifies type 'unsigned int' but the argument has type 'resource_size_t' (aka 'unsigned long long') [-Wformat] Reported-by: kernel test robot <lkp@intel.com> Fixes: 5a1a3b9c19dd ("dmaengine: ste_dma40: Get LCPA SRAM from SRAM node") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20230517064434.141091-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-18MAINTAINERS: Add myself as the DW eDMA driver reviewerSerge Semin1-0/+1
The driver original maintainer has been inactive for almost two years now. It doesn't positively affect the new patches tests and reviews process. Since the DW eDMA engine has been embedded into the PCIe controllers in several our SoCs we will be interested in helping with the updates review. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20230511190902.28896-15-Sergey.Semin@baikalelectronics.ru Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-17MAINTAINERS: Add Manivannan to DW eDMA driver maintainers listSerge Semin1-0/+1
Manivannan has been very active in reviewing the bits coming to the DW eDMA driver. Let's add him to the driver maintainers list. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20230511190902.28896-14-Sergey.Semin@baikalelectronics.ru Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-17MAINTAINERS: Demote Gustavo Pimentel to DW EDMA driver reviewerSerge Semin1-1/+1
No maintaining actions from Gustavo have been noticed for over a year. Demote him to being the DW eDMA driver reviewer for now. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20230511190902.28896-13-Sergey.Semin@baikalelectronics.ru Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-16dmaengine: ti: k3-udma: Add support for J721S2 CSI BCDMA instanceVaishnav Achath1-0/+25
J721S2 has dedicated BCDMA instance for Camera Serial Interface RX and TX. The BCDMA instance supports RX and TX channels but block copy channels are not present, add support for the same. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Link: https://lore.kernel.org/r/20230505143929.28131-3-vaishnav.a@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-16dt-bindings: dma: ti: Add J721S2 BCDMAVaishnav Achath1-1/+29
Add bindings for J721S2 BCDMA instance dedicated for Camera Serial Interface. Unlike AM62A CSI BCDMA, this instance has RX and TX channels but lacks block copy channels. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230505143929.28131-2-vaishnav.a@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-16dmaengine: ti: k3-psil-j721s2: Add PSI-L thread map for main CPSW2GKishon Vijay Abraham I1-0/+11
Add PSI-L thread map for main CPSW2G. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20230511034704.656155-1-s-vadapalli@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-16dt-bindings: dma: xilinx: Add power-domains to xlnx,zynqmp-dpdmaMichal Simek1-0/+6
DP DMA has own power domain that's why describe required power-domain property. Signed-off-by: Michal Simek <michal.simek@amd.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/8f5651634df338743f95a7253a741f9ddc92487d.1683891609.git.michal.simek@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-16dmaengine: ste_dma40: Return error codes properlyLinus Walleij1-22/+24
This makes the probe() and its subfunction d40_hw_detect_init() return proper error codes. One effect of this is that deferred probe, e.g from the clock, will start to work, would it happen. Also it is better design. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230417-ux500-dma40-cleanup-v3-7-60bfa6785968@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-16dmaengine: ste_dma40: Use managed resourcesLinus Walleij1-119/+61
This switches the DMA40 driver to use a bunch of managed resources and strip down the errorpath. The result is pretty neat and makes the driver way more readable. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230417-ux500-dma40-cleanup-v3-6-60bfa6785968@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-16dmaengine: ste_dma40: Pass dev to OF functionLinus Walleij1-7/+6
The OF platform data population function only wants to use struct device *dev, so pass that instead. This change makes the compiler realize that the local platform data variable is unused, so drop that too. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230417-ux500-dma40-cleanup-v3-5-60bfa6785968@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-16dmaengine: ste_dma40: Remove platform dataLinus Walleij3-119/+41
The Ux500 is device tree-only since ages. Delete the platform data header and push it into or next to the driver instead. Drop the non-DT probe path since this will not happen. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230417-ux500-dma40-cleanup-v3-4-60bfa6785968@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-16dmaengine: ste_dma40: Add dev helper variableLinus Walleij1-24/+26
The &pdev->dev device pointer is used so many times in the probe() and d40_hw_detect_init() functions that a local *dev variable makes the code way easier to read. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230417-ux500-dma40-cleanup-v3-3-60bfa6785968@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-16dmaengine: ste_dma40: Get LCPA SRAM from SRAM nodeLinus Walleij2-23/+25
Instead of passing the reserved SRAM as a "reg" field look for a phandle to the LCPA SRAM memory so we can use the proper SRAM device tree bindings for the SRAM. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230417-ux500-dma40-cleanup-v3-2-60bfa6785968@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-16dt-bindings: dma: dma40: Prefer to pass sram through phandleLinus Walleij1-8/+28
Extend the DMA40 bindings so that we can pass two SRAM segments as phandles instead of directly referring to the memory address in the second reg cell. This enables more granular control over the SRAM, and adds the optiona LCLA SRAM segment as well. Deprecate the old way of passing LCPA as a second reg cell, make sram compulsory. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230417-ux500-dma40-cleanup-v3-1-60bfa6785968@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-07Linux 6.4-rc1v6.4-rc1Linus Torvalds1-2/+2
2023-05-06Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL"Arnaldo Carvalho de Melo6-20/+14
This reverts commit a980755beb5aca9002e1c95ba519b83a44242b5b. We need to better polish building with BPF skels, so revert back to making it an experimental feature that has to be explicitely enabled using BUILD_BPF_SKEL=1. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-06Revert "perf build: Warn for BPF skeletons if endian mismatches"Arnaldo Carvalho de Melo1-10/+7
This reverts commit 51924ae69eea5bc90b5da525fbcf4bbd5f8551b3. We need to better polish building with BPF skels, so revert back to making it an experimental feature that has to be explicitely enabled using BUILD_BPF_SKEL=1. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-06dmapool: link blocks across pagesKeith Busch1-127/+130
The allocated dmapool pages are never freed for the lifetime of the pool. There is no need for the two level list+stack lookup for finding a free block since nothing is ever removed from the list. Just use a simple stack, reducing time complexity to constant. The implementation inserts the stack linking elements and the dma handle of the block within itself when freed. This means the smallest possible dmapool block is increased to at most 16 bytes to accommodate these fields, but there are no exisiting users requesting a dma pool smaller than that anyway. Removing the list has a significant change in performance. Using the kernel's micro-benchmarking self test: Before: # modprobe dmapool_test dmapool test: size:16 blocks:8192 time:57282 dmapool test: size:64 blocks:8192 time:172562 dmapool test: size:256 blocks:8192 time:789247 dmapool test: size:1024 blocks:2048 time:371823 dmapool test: size:4096 blocks:1024 time:362237 After: # modprobe dmapool_test dmapool test: size:16 blocks:8192 time:24997 dmapool test: size:64 blocks:8192 time:26584 dmapool test: size:256 blocks:8192 time:33542 dmapool test: size:1024 blocks:2048 time:9022 dmapool test: size:4096 blocks:1024 time:6045 The module test allocates quite a few blocks that may not accurately represent how these pools are used in real life. For a more marco level benchmark, running fio high-depth + high-batched on nvme, this patch shows submission and completion latency reduced by ~100usec each, 1% IOPs improvement, and perf record's time spent in dma_pool_alloc/free were reduced by half. [kbusch@kernel.org: push new blocks in ascending order] Link: https://lkml.kernel.org/r/20230221165400.1595247-1-kbusch@meta.com Link: https://lkml.kernel.org/r/20230126215125.4069751-12-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06dmapool: don't memset on free twiceKeith Busch1-2/+2
If debug is enabled, dmapool will poison the range, so no need to clear it to 0 immediately before writing over it. Link: https://lkml.kernel.org/r/20230126215125.4069751-11-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06dmapool: simplify freeingKeith Busch1-16/+6
The actions for busy and not busy are mostly the same, so combine these and remove the unnecessary function. Also, the pool is about to be freed so there's no need to poison the page data since we only check for poison on alloc, which can't be done on a freed pool. Link: https://lkml.kernel.org/r/20230126215125.4069751-10-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06dmapool: consolidate page initializationKeith Busch1-4/+3
Various fields of the dma pool are set in different places. Move it all to one function. Link: https://lkml.kernel.org/r/20230126215125.4069751-9-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06dmapool: rearrange page alloc failure handlingKeith Busch1-7/+9
Handle the error in a condition so the good path can be in the normal flow. Link: https://lkml.kernel.org/r/20230126215125.4069751-8-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06dmapool: move debug code to own functionsKeith Busch1-51/+77
Clean up the normal path by moving the debug code outside it. Link: https://lkml.kernel.org/r/20230126215125.4069751-7-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06dmapool: speedup DMAPOOL_DEBUG with init_on_allocTony Battersby1-1/+1
Avoid double-memset of the same allocated memory in dma_pool_alloc() when both DMAPOOL_DEBUG is enabled and init_on_alloc=1. Link: https://lkml.kernel.org/r/20230126215125.4069751-6-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06dmapool: cleanup integer typesTony Battersby1-8/+11
To represent the size of a single allocation, dmapool currently uses 'unsigned int' in some places and 'size_t' in other places. Standardize on 'unsigned int' to reduce overhead, but use 'size_t' when counting all the blocks in the entire pool. Link: https://lkml.kernel.org/r/20230126215125.4069751-5-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06dmapool: use sysfs_emit() instead of scnprintf()Tony Battersby1-16/+7
Use sysfs_emit instead of scnprintf, snprintf or sprintf. Link: https://lkml.kernel.org/r/20230126215125.4069751-4-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06dmapool: remove checks for dev == NULLTony Battersby1-31/+14
dmapool originally tried to support pools without a device because dma_alloc_coherent() supports allocations without a device. But nobody ended up using dma pools without a device, and trying to do so will result in an oops. So remove the checks for pool->dev == NULL since they are unneeded bloat. [kbusch@kernel.org: add check for null dev on create] Link: https://lkml.kernel.org/r/20230126215125.4069751-3-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06nfs: fix mis-merged __filemap_get_folio() error checkLinus Torvalds1-1/+1
Fix another case of an incorrect check for the returned 'folio' value from __filemap_get_folio(). The failure case used to return NULL, but was changed by commit 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio"). But in the meantime, commit ec108d3cc766 ("NFS: Convert readdir page array functions to use a folio") added a new user of that function. And my merge of the two did not fix this up correctly. The ext4 merge had the same issue, but that one had been caught in linux-next and got properly fixed while merging. Fixes: 0127f25b5dfc ("Merge tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs") Cc: Anna Schumaker <anna@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-05-06afs: fix the afs_dir_get_folio return valueChristoph Hellwig1-3/+4
Keep returning NULL on failure instead of letting an ERR_PTR escape to callers that don't expect it. Link: https://lkml.kernel.org/r/20230503154526.1223095-2-hch@lst.de Fixes: 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio") Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: David Howells <dhowells@redhat.com> Tested-by: David Howells <dhowells@redhat.com> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06nilfs2: do not write dirty data after degenerating to read-onlyRyusuke Konishi1-1/+4
According to syzbot's report, mark_buffer_dirty() called from nilfs_segctor_do_construct() outputs a warning with some patterns after nilfs2 detects metadata corruption and degrades to read-only mode. After such read-only degeneration, page cache data may be cleared through nilfs_clear_dirty_page() which may also clear the uptodate flag for their buffer heads. However, even after the degeneration, log writes are still performed by unmount processing etc., which causes mark_buffer_dirty() to be called for buffer heads without the "uptodate" flag and causes the warning. Since any writes should not be done to a read-only file system in the first place, this fixes the warning in mark_buffer_dirty() by letting nilfs_segctor_do_construct() abort early if in read-only mode. This also changes the retry check of nilfs_segctor_write_out() to avoid unnecessary log write retries if it detects -EROFS that nilfs_segctor_do_construct() returned. Link: https://lkml.kernel.org/r/20230427011526.13457-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+2af3bc9585be7f23f290@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=2af3bc9585be7f23f290 Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06mm: do not reclaim private data from pinned pageJan Kara1-0/+10
If the page is pinned, there's no point in trying to reclaim it. Furthermore if the page is from the page cache we don't want to reclaim fs-private data from the page because the pinning process may be writing to the page at any time and reclaiming fs private info on a dirty page can upset the filesystem (see link below). Link: https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz Link: https://lkml.kernel.org/r/20230428124140.30166-1-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06nilfs2: fix infinite loop in nilfs_mdt_get_block()Ryusuke Konishi1-4/+12
If the disk image that nilfs2 mounts is corrupted and a virtual block address obtained by block lookup for a metadata file is invalid, nilfs_bmap_lookup_at_level() may return the same internal return code as -ENOENT, meaning the block does not exist in the metadata file. This duplication of return codes confuses nilfs_mdt_get_block(), causing it to read and create a metadata block indefinitely. In particular, if this happens to the inode metadata file, ifile, semaphore i_rwsem can be left held, causing task hangs in lock_mount. Fix this issue by making nilfs_bmap_lookup_at_level() treat virtual block address translation failures with -ENOENT as metadata corruption instead of returning the error code. Link: https://lkml.kernel.org/r/20230430193046.6769-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+221d75710bde87fa0e97@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=221d75710bde87fa0e97 Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06mm/mmap/vma_merge: always check invariantsLorenzo Stoakes1-5/+5
We may still have inconsistent input parameters even if we choose not to merge and the vma_merge() invariant checks are useful for checking this with no production runtime cost (these are only relevant when CONFIG_DEBUG_VM is specified). Therefore, perform these checks regardless of whether we merge. This is relevant, as a recent issue (addressed in commit "mm/mempolicy: Correctly update prev when policy is equal on mbind") in the mbind logic was only picked up in the 6.2.y stable branch where these assertions are performed prior to determining mergeability. Had this remained the same in mainline this issue may have been picked up faster, so moving forward let's always check them. Link: https://lkml.kernel.org/r/df548a6ae3fa135eec3b446eb3dae8eb4227da97.1682885809.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-06filemap: Handle error return from __filemap_get_folio()Matthew Wilcox1-1/+1
Smatch reports that filemap_fault() was missed in the conversion of __filemap_get_folio() error returns from NULL to ERR_PTR. Fixes: 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Reported-by: syzbot+48011b86c8ea329af1b9@syzkaller.appspotmail.com Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-05-05s390: remove the unneeded select GCC12_NO_ARRAY_BOUNDSLukas Bulwahn1-1/+0
Commit 0da6e5fd6c37 ("gcc: disable '-Warray-bounds' for gcc-13 too") makes config GCC11_NO_ARRAY_BOUNDS to be for disabling -Warray-bounds in any gcc version 11 and upwards, and with that, removes the GCC12_NO_ARRAY_BOUNDS config as it is now covered by the semantics of GCC11_NO_ARRAY_BOUNDS. As GCC11_NO_ARRAY_BOUNDS is yes by default, there is no need for the s390 architecture to explicitly select GCC11_NO_ARRAY_BOUNDS. Hence, the select GCC12_NO_ARRAY_BOUNDS in arch/s390/Kconfig can simply be dropped. Remove the unneeded "select GCC12_NO_ARRAY_BOUNDS". Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-05-05perf metrics: Fix SEGV with --for-each-cgroupIan Rogers1-0/+1
Ensure the metric threshold is copied correctly or else a use of uninitialized memory happens. Fixes: d0a3052f6faefffc ("perf metric: Compute and print threshold values") Reported-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230505204119.3443491-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-05perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used ↵Arnaldo Carvalho de Melo3-20/+174
structs + CO-RE Linus reported a build break due to using a vmlinux without a BTF elf section to generate the vmlinux.h header with bpftool for use in the BPF tools in tools/perf/util/bpf_skel/*.bpf.c. Instead add a vmlinux.h file with the structs needed with the fields the tools need, marking the structs with __attribute__((preserve_access_index)), so that libbpf's CO-RE code can fixup the struct field offsets. In some cases the vmlinux.h file that was being generated by bpftool from the kernel BTF information was not needed at all, just including linux/bpf.h, sometimes linux/perf_event.h was enough as non-UAPI types were not being used. To keep te patch small, include those UAPI headers from the trimmed down vmlinux.h file, that then provides the tools with just the structs and the subset of its fields needed for them. Testing it: # perf lock contention -b find / > /dev/null ^C contended total wait max wait avg wait type caller 7 53.59 us 10.86 us 7.66 us rwlock:R start_this_handle+0xa0 2 30.35 us 21.99 us 15.17 us rwsem:R iterate_dir+0x52 1 9.04 us 9.04 us 9.04 us rwlock:W start_this_handle+0x291 1 8.73 us 8.73 us 8.73 us spinlock raw_spin_rq_lock_nested+0x1e # # perf lock contention -abl find / > /dev/null ^C contended total wait max wait avg wait address symbol 1 262.96 ms 262.96 ms 262.96 ms ffff8e67502d0170 (mutex) 12 244.24 us 39.91 us 20.35 us ffff8e6af56f8070 mmap_lock (rwsem) 7 30.28 us 6.85 us 4.33 us ffff8e6c865f1d40 rq_lock (spinlock) 3 7.42 us 4.03 us 2.47 us ffff8e6c864b1d40 rq_lock (spinlock) 2 3.72 us 2.19 us 1.86 us ffff8e6c86571d40 rq_lock (spinlock) 1 2.42 us 2.42 us 2.42 us ffff8e6c86471d40 rq_lock (spinlock) 4 2.11 us 559 ns 527 ns ffffffff9a146c80 rcu_state (spinlock) 3 1.45 us 818 ns 482 ns ffff8e674ae8384c (rwlock) 1 870 ns 870 ns 870 ns ffff8e68456ee060 (rwlock) 1 663 ns 663 ns 663 ns ffff8e6c864f1d40 rq_lock (spinlock) 1 573 ns 573 ns 573 ns ffff8e6c86531d40 rq_lock (spinlock) 1 472 ns 472 ns 472 ns ffff8e6c86431740 (spinlock) 1 397 ns 397 ns 397 ns ffff8e67413a4f04 (spinlock) # # perf test offcpu 95: perf record offcpu profiling tests : Ok # # perf kwork latency --use-bpf Starting trace, Hit <Ctrl+C> to stop and report ^C Kwork Name | Cpu | Avg delay | Count | Max delay | Max delay start | Max delay end | -------------------------------------------------------------------------------------------------------------------------------- (w)flush_memcg_stats_dwork | 0000 | 1056.212 ms | 2 | 2112.345 ms | 550113.229573 s | 550115.341919 s | (w)toggle_allocation_gate | 0000 | 10.144 ms | 62 | 416.389 ms | 550113.453518 s | 550113.869907 s | (w)0xffff8e6748e28080 | 0002 | 0.623 ms | 1 | 0.623 ms | 550110.989841 s | 550110.990464 s | (w)vmstat_shepherd | 0000 | 0.586 ms | 10 | 2.828 ms | 550111.971536 s | 550111.974364 s | (w)vmstat_update | 0007 | 0.363 ms | 5 | 1.634 ms | 550113.222520 s | 550113.224154 s | (w)vmstat_update | 0000 | 0.324 ms | 10 | 2.827 ms | 550111.971526 s | 550111.974354 s | (w)0xffff8e674c5f4a58 | 0002 | 0.102 ms | 5 | 0.134 ms | 550110.989839 s | 550110.989972 s | (w)psi_avgs_work | 0001 | 0.086 ms | 3 | 0.107 ms | 550114.957852 s | 550114.957959 s | (w)psi_avgs_work | 0000 | 0.079 ms | 5 | 0.100 ms | 550118.605668 s | 550118.605768 s | (w)kfree_rcu_monitor | 0006 | 0.079 ms | 1 | 0.079 ms | 550110.925821 s | 550110.925900 s | (w)psi_avgs_work | 0004 | 0.079 ms | 1 | 0.079 ms | 550109.581835 s | 550109.581914 s | (w)psi_avgs_work | 0001 | 0.078 ms | 1 | 0.078 ms | 550109.197809 s | 550109.197887 s | (w)psi_avgs_work | 0002 | 0.077 ms | 5 | 0.086 ms | 550110.669819 s | 550110.669905 s | <SNIP> # strace -e bpf -o perf-stat-bpf-counters.output perf stat -e cycles --bpf-counters sleep 1 Performance counter stats for 'sleep 1': 6,197,983 cycles 1.003922848 seconds time elapsed 0.000000000 seconds user 0.002032000 seconds sys # head -7 perf-stat-bpf-counters.output bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/perf_attr_map", bpf_fd=0, file_flags=0}, 16) = 3 bpf(BPF_OBJ_GET_INFO_BY_FD, {info={bpf_fd=3, info_len=88, info=0x7ffcead64990}}, 16) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=3, key=0x24129e0, value=0x7ffcead65a48, flags=BPF_ANY}, 32) = 0 bpf(BPF_LINK_GET_FD_BY_ID, {link_id=1252}, 12) = -1 ENOENT (No such file or directory) bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=2, insns=0x7ffcead65780, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0, +func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0}, 116) = 4 bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=2, insns=0x7ffcead65920, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0, +func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0, fd_array=NULL}, 128) = 4 bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\0\20\0\0\0\20\0\0\0\5\0\0\0\1\0\0\0\0\0\0\1"..., btf_log_buf=NULL, btf_size=45, btf_log_size=0, btf_log_level=0}, 28) = 4 # Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Suggested-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Song Liu <song@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Co-developed-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/lkml/ZFU1PJrn8YtHIqno@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-05perf stat: Separate bperf from bpf_profilerDmitrii Dolgov2-2/+7
It seems that perf stat -b <prog id> doesn't produce any results: $ perf stat -e cycles -b 4 -I 10000 -vvv Control descriptor is not initialized cycles: 0 0 0 time counts unit events 10.007641640 <not supported> cycles Looks like this happens because fentry/fexit progs are getting loaded, but the corresponding perf event is not enabled and not added into the events bpf map. I think there is some mixing up between two type of bpf support, one for bperf and one for bpf_profiler. Both are identified via evsel__is_bpf, based on which perf events are enabled, but for the latter (bpf_profiler) a perf event is required. Using evsel__is_bperf to check only bperf produces expected results: $ perf stat -e cycles -b 4 -I 10000 -vvv Control descriptor is not initialized ------------------------------------------------------------ perf_event_attr: size 136 sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 3 ------------------------------------------------------------ [...perf_event_attr for other CPUs...] ------------------------------------------------------------ cycles: 309426 169009 169009 time counts unit events 10.010091271 309426 cycles The final numbers correspond (at least in the level of magnitude) to the same metric obtained via bpftool. Fixes: 112cb56164bc2108 ("perf stat: Introduce config stat.bpf-counter-events") Reviewed-by: Song Liu <song@kernel.org> Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com> Tested-by: Song Liu <song@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230412182316.11628-1-9erthalion6@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-12-17 03:34:05 +0000