aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/stackcollapse.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2025-08-01vhost/vsock: Allocate nonlinear SKBs for handling large receive buffersWill Deacon2-8/+32
When receiving a packet from a guest, vhost_vsock_handle_tx_kick() calls vhost_vsock_alloc_linear_skb() to allocate and fill an SKB with the receive data. Unfortunately, these are always linear allocations and can therefore result in significant pressure on kmalloc() considering that the maximum packet size (VIRTIO_VSOCK_MAX_PKT_BUF_SIZE + VIRTIO_VSOCK_SKB_HEADROOM) is a little over 64KiB, resulting in a 128KiB allocation for each packet. Rework the vsock SKB allocation so that, for sizes with page order greater than PAGE_ALLOC_COSTLY_ORDER, a nonlinear SKB is allocated instead with the packet header in the SKB and the receive data in the fragments. Finally, add a debug warning if virtio_vsock_skb_rx_put() is ever called on an SKB with a non-zero length, as this would be destructive for the nonlinear case. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20250717090116.11987-8-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-08-01vsock/virtio: Move SKB allocation lower-bound check to callersWill Deacon2-4/+2
virtio_vsock_alloc_linear_skb() checks that the requested size is at least big enough for the packet header (VIRTIO_VSOCK_SKB_HEADROOM). Of the three callers of virtio_vsock_alloc_linear_skb(), only vhost_vsock_alloc_skb() can potentially pass a packet smaller than the header size and, as it already has a check against the maximum packet size, extend its bounds checking to consider the minimum packet size and remove the check from virtio_vsock_alloc_linear_skb(). Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20250717090116.11987-7-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-08-01vsock/virtio: Rename virtio_vsock_alloc_skb()Will Deacon4-4/+5
In preparation for nonlinear allocations for large SKBs, rename virtio_vsock_alloc_skb() to virtio_vsock_alloc_linear_skb() to indicate that it returns linear SKBs unconditionally and switch all callers over to this new interface for now. No functional change. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20250717090116.11987-6-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-08-01vsock/virtio: Resize receive buffers so that each SKB fits in a 4K pageWill Deacon2-2/+7
When allocating receive buffers for the vsock virtio RX virtqueue, an SKB is allocated with a 4140 data payload (the 44-byte packet header + VIRTIO_VSOCK_DEFAULT_RX_BUF_SIZE). Even when factoring in the SKB overhead, the resulting 8KiB allocation thanks to the rounding in kmalloc_reserve() is wasteful (~3700 unusable bytes) and results in a higher-order page allocation on systems with 4KiB pages just for the sake of a few hundred bytes of packet data. Limit the vsock virtio RX buffers to 4KiB per SKB, resulting in much better memory utilisation and removing the need to allocate higher-order pages entirely. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20250717090116.11987-5-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-08-01vsock/virtio: Move length check to callers of virtio_vsock_skb_rx_put()Will Deacon3-9/+6
virtio_vsock_skb_rx_put() only calls skb_put() if the length in the packet header is not zero even though skb_put() handles this case gracefully. Remove the functionally redundant check from virtio_vsock_skb_rx_put() and, on the assumption that this is a worthwhile optimisation for handling credit messages, augment the existing length checks in virtio_transport_rx_work() to elide the call for zero-length payloads. Since the callers all have the length, extend virtio_vsock_skb_rx_put() to take it as an additional parameter rather than fish it back out of the packet header. Note that the vhost code already has similar logic in vhost_vsock_alloc_skb(). Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20250717090116.11987-4-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-08-01vsock/virtio: Validate length in packet header before skb_put()Will Deacon1-2/+10
When receiving a vsock packet in the guest, only the virtqueue buffer size is validated prior to virtio_vsock_skb_rx_put(). Unfortunately, virtio_vsock_skb_rx_put() uses the length from the packet header as the length argument to skb_put(), potentially resulting in SKB overflow if the host has gone wonky. Validate the length as advertised by the packet header before calling virtio_vsock_skb_rx_put(). Cc: <stable@vger.kernel.org> Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20250717090116.11987-3-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2025-08-01vhost/vsock: Avoid allocating arbitrarily-sized SKBsWill Deacon1-2/+4
vhost_vsock_alloc_skb() returns NULL for packets advertising a length larger than VIRTIO_VSOCK_MAX_PKT_BUF_SIZE in the packet header. However, this is only checked once the SKB has been allocated and, if the length in the packet header is zero, the SKB may not be freed immediately. Hoist the size check before the SKB allocation so that an iovec larger than VIRTIO_VSOCK_MAX_PKT_BUF_SIZE + the header size is rejected outright. The subsequent check on the length field in the header can then simply check that the allocated SKB is indeed large enough to hold the packet. Cc: <stable@vger.kernel.org> Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20250717090116.11987-2-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-08-01vhost_net: basic in_order supportJason Wang1-25/+61
This patch introduces basic in-order support for vhost-net. By recording the number of batched buffers in an array when calling `vhost_add_used_and_signal_n()`, we can reduce the number of userspace accesses. Note that the vhost-net batching logic is kept as we still count the number of buffers there. Testing Results: With testpmd: - TX: txonly mode + vhost_net with XDP_DROP on TAP shows a 17.5% improvement, from 4.75 Mpps to 5.35 Mpps. - RX: No obvious improvements were observed. With virtio-ring in-order experimental code in the guest: - TX: pktgen in the guest + XDP_DROP on TAP shows a 19% improvement, from 5.2 Mpps to 6.2 Mpps. - RX: pktgen on TAP with vhost_net + XDP_DROP in the guest achieves a 6.1% improvement, from 3.47 Mpps to 3.61 Mpps. Acked-by: Jonah Palmer <jonah.palmer@oracle.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20250714084755.11921-4-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com>
2025-08-01vhost: basic in order supportJason Wang3-25/+109
This patch adds basic in order support for vhost. Two optimizations are implemented in this patch: 1) Since driver uses descriptor in order, vhost can deduce the next avail ring head by counting the number of descriptors that has been used in next_avail_head. This eliminate the need to access the available ring in vhost. 2) vhost_add_used_and_singal_n() is extended to accept the number of batched buffers per used elem. While this increases the times of userspace memory access but it helps to reduce the chance of used ring access of both the driver and vhost. Vhost-net will be the first user for this. Acked-by: Jonah Palmer <jonah.palmer@oracle.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20250714084755.11921-3-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com>
2025-08-01vhost: fail early when __vhost_add_used() failsJason Wang1-0/+3
This patch fails vhost_add_used_n() early when __vhost_add_used() fails to make sure used idx is not updated with stale used ring information. Reported-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20250714084755.11921-2-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com>
2025-08-01vhost: Reintroduce kthread API and add mode selectionCindy Lu4-18/+295
Since commit 6e890c5d5021 ("vhost: use vhost_tasks for worker threads"), the vhost uses vhost_task and operates as a child of the owner thread. This is required for correct CPU usage accounting, especially when using containers. However, this change has caused confusion for some legacy userspace applications, and we didn't notice until it's too late. Unfortunately, it's too late to revert - we now have userspace depending both on old and new behaviour :( To address the issue, reintroduce kthread mode for vhost workers and provide a configuration to select between kthread and task worker. - Add 'fork_owner' parameter to vhost_dev to let users select kthread or task mode. Default mode is task mode(VHOST_FORK_OWNER_TASK). - Reintroduce kthread mode support: * Bring back the original vhost_worker() implementation, and renamed to vhost_run_work_kthread_list(). * Add cgroup support for the kthread * Introduce struct vhost_worker_ops: - Encapsulates create / stop / wake‑up callbacks. - vhost_worker_create() selects the proper ops according to inherit_owner. - Userspace configuration interface: * New IOCTLs: - VHOST_SET_FORK_FROM_OWNER lets userspace select task mode (VHOST_FORK_OWNER_TASK) or kthread mode (VHOST_FORK_OWNER_KTHREAD) - VHOST_GET_FORK_FROM_OWNER reads the current worker mode * Expose module parameter 'fork_from_owner_default' to allow system administrators to configure the default mode for vhost workers * Kconfig option CONFIG_VHOST_ENABLE_FORK_OWNER_CONTROL controls whether these IOCTLs and the parameter are available - The VHOST_NEW_WORKER functionality requires fork_owner to be set to true, with validation added to ensure proper configuration This partially reverts or improves upon: commit 6e890c5d5021 ("vhost: use vhost_tasks for worker threads") commit 1cdaafa1b8b4 ("vhost: replace single worker pointer with xarray") Fixes: 6e890c5d5021 ("vhost: use vhost_tasks for worker threads"), Signed-off-by: Cindy Lu <lulu@redhat.com> Message-Id: <20250714071333.59794-2-lulu@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com>
2025-08-01vdpa: Fix IDR memory leak in VDUSE module exitAnders Roxell1-0/+1
Add missing idr_destroy() call in vduse_exit() to properly free the vduse_idr radix tree nodes. Without this, module load/unload cycles leak 576-byte radix tree node allocations, detectable by kmemleak as: unreferenced object (size 576): backtrace: [<ffffffff81234567>] radix_tree_node_alloc+0xa0/0xf0 [<ffffffff81234568>] idr_get_free+0x128/0x280 The vduse_idr is initialized via DEFINE_IDR() at line 136 and used throughout the VDUSE (vDPA Device in Userspace) driver for device ID management. The fix follows the documented pattern in lib/idr.c and matches the cleanup approach used by other drivers. This leak was discovered through comprehensive module testing with cumulative kmemleak detection across 10 load/unload iterations per module. Fixes: c8a6153b6c59 ("vduse: Introduce VDUSE - vDPA Device in Userspace") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Message-Id: <20250704125335.1084649-1-anders.roxell@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-08-01vdpa/mlx5: Fix release of uninitialized resources on error pathDragos Tatulea2-4/+9
The commit in the fixes tag made sure that mlx5_vdpa_free() is the single entrypoint for removing the vdpa device resources added in mlx5_vdpa_dev_add(), even in the cleanup path of mlx5_vdpa_dev_add(). This means that all functions from mlx5_vdpa_free() should be able to handle uninitialized resources. This was not the case though: mlx5_vdpa_destroy_mr_resources() and mlx5_cmd_cleanup_async_ctx() were not able to do so. This caused the splat below when adding a vdpa device without a MAC address. This patch fixes these remaining issues: - Makes mlx5_vdpa_destroy_mr_resources() return early if called on uninitialized resources. - Moves mlx5_cmd_init_async_ctx() early on during device addition because it can't fail. This means that mlx5_cmd_cleanup_async_ctx() also can't fail. To mirror this, move the call site of mlx5_cmd_cleanup_async_ctx() in mlx5_vdpa_free(). An additional comment was added in mlx5_vdpa_free() to document the expectations of functions called from this context. Splat: mlx5_core 0000:b5:03.2: mlx5_vdpa_dev_add:3950:(pid 2306) warning: No mac address provisioned? ------------[ cut here ]------------ WARNING: CPU: 13 PID: 2306 at kernel/workqueue.c:4207 __flush_work+0x9a/0xb0 [...] Call Trace: <TASK> ? __try_to_del_timer_sync+0x61/0x90 ? __timer_delete_sync+0x2b/0x40 mlx5_vdpa_destroy_mr_resources+0x1c/0x40 [mlx5_vdpa] mlx5_vdpa_free+0x45/0x160 [mlx5_vdpa] vdpa_release_dev+0x1e/0x50 [vdpa] device_release+0x31/0x90 kobject_cleanup+0x37/0x130 mlx5_vdpa_dev_add+0x327/0x890 [mlx5_vdpa] vdpa_nl_cmd_dev_add_set_doit+0x2c1/0x4d0 [vdpa] genl_family_rcv_msg_doit+0xd8/0x130 genl_family_rcv_msg+0x14b/0x220 ? __pfx_vdpa_nl_cmd_dev_add_set_doit+0x10/0x10 [vdpa] genl_rcv_msg+0x47/0xa0 ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x53/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x27b/0x3b0 netlink_sendmsg+0x1f7/0x430 __sys_sendto+0x1fa/0x210 ? ___pte_offset_map+0x17/0x160 ? next_uptodate_folio+0x85/0x2b0 ? percpu_counter_add_batch+0x51/0x90 ? filemap_map_pages+0x515/0x660 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x7b/0x2c0 ? do_read_fault+0x108/0x220 ? do_pte_missing+0x14a/0x3e0 ? __handle_mm_fault+0x321/0x730 ? count_memcg_events+0x13f/0x180 ? handle_mm_fault+0x1fb/0x2d0 ? do_user_addr_fault+0x20c/0x700 ? syscall_exit_work+0x104/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f0c25b0feca [...] ---[ end trace 0000000000000000 ]--- Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Fixes: 83e445e64f48 ("vdpa/mlx5: Fix error path during device add") Reported-by: Wenli Quan <wquan@redhat.com> Closes: https://lore.kernel.org/virtualization/CADZSLS0r78HhZAStBaN1evCSoPqRJU95Lt8AqZNJ6+wwYQ6vPQ@mail.gmail.com/ Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Message-Id: <20250708120424.2363354-2-dtatulea@nvidia.com> Tested-by: Wenli Quan <wquan@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-08-01vhost-scsi: Fix check for inline_sg_cnt exceeding preallocated limitAlok Tiwari1-1/+1
The condition comparing ret to VHOST_SCSI_PREALLOC_SGLS was incorrect, as ret holds the result of kstrtouint() (typically 0 on success), not the parsed value. Update the check to use cnt, which contains the actual user-provided value. prevents silently accepting values exceeding the maximum inline_sg_cnt. Fixes: bca939d5bcd0 ("vhost-scsi: Dynamically allocate scatterlists") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20250628183405.3979538-1-alok.a.tiwari@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2025-08-01virtio: virtio_dma_buf: fix missing parameter documentationWangYuli1-0/+2
Add missing parameter documentation for virtio_dma_buf_attach() function to fix kernel-doc warnings: Warning: drivers/virtio/virtio_dma_buf.c:41 function parameter 'dma_buf' not described in 'virtio_dma_buf_attach' Warning: drivers/virtio/virtio_dma_buf.c:41 function parameter 'attach' not described in 'virtio_dma_buf_attach' The function documentation was missing descriptions for both the 'dma_buf' and 'attach' parameters. Add proper parameter documentation following kernel-doc format. Signed-off-by: WangYuli <wangyuli@uniontech.com> Message-Id: <241C7118259DA110+20250623065210.270237-1-wangyuli@uniontech.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
2025-08-01vhost: Fix typosAlok Tiwari1-5/+5
Fix multiple typos and improve comment clarity across vhost.c. Spelling errors: "thead" -> "thread", "RUNNUNG" -> "RUNNING" and "available". Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Message-Id: <20250615173933.1610324-1-alok.a.tiwari@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org>
2025-08-01vhost: vringh: Remove unused functionsDr. David Alan Gilbert2-82/+0
The functions: vringh_abandon_kern() vringh_abandon_user() vringh_iov_pull_kern() and vringh_iov_push_kern() were all added in 2013 by commit f87d0fbb5798 ("vringh: host-side implementation of virtio rings.") but have remained unused. Remove them and the two helper functions they used. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Message-Id: <20250617001838.114457-3-linux@treblig.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org>
2025-08-01vhost: vringh: Remove unused iotlb functionsDr. David Alan Gilbert2-48/+0
The functions: vringh_abandon_iotlb() vringh_notify_disable_iotlb() and vringh_notify_enable_iotlb() were added in 2020 by commit 9ad9c49cfe97 ("vringh: IOTLB support") but have remained unused. Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Simon Horman <horms@kernel.org> Message-Id: <20250617001838.114457-2-linux@treblig.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com>
2025-08-01vhost-scsi: Fix log flooding with target does not exist errorsMike Christie1-3/+1
As part of the normal initiator side scanning the guest's scsi layer will loop over all possible targets and send an inquiry. Since the max number of targets for virtio-scsi is 256, this can result in 255 error messages about targets not existing if you only have a single target. When there's more than 1 vhost-scsi device each with a single target, then you get N * 255 log messages. It looks like the log message was added by accident in: commit 3f8ca2e115e5 ("vhost/scsi: Extract common handling code from control queue handler") when we added common helpers. Then in: commit 09d7583294aa ("vhost/scsi: Use common handling code in request queue handler") we converted the scsi command processing path to use the new helpers so we started to see the extra log messages during scanning. The patches were just making some code common but added the vq_err call and I'm guessing the patch author forgot to enable the vq_err call (vq_err is implemented by pr_debug which defaults to off). So this patch removes the call since it's expected to hit this path during device discovery. Fixes: 09d7583294aa ("vhost/scsi: Use common handling code in request queue handler") Signed-off-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20250611210113.10912-1-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-08-01vhost-scsi: Fix typos and formatting in comments and logsAlok Tiwari1-9/+9
This patch corrects several minor typos and formatting issues. Changes include: Fixing misspellings like in comments - "explict" -> "explicit" - "infight" -> "inflight", - "with generate" -> "will generate" formatting in logs - Correcting log formatting specifier from "%dd" to "%d" - Adding a missing space in the sysfs emit string to prevent misinterpreted output like "X86_64on ". changing to "X86_64 on " - Cleaning up stray semicolons in struct definition endings These changes improve code readability and consistency. no functionality changes. Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Message-Id: <20250611143932.2443796-1-alok.a.tiwari@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Mike Christie <michael.christie@oracle.com>
2025-08-01vdpa/mlx5: Fix needs_teardown flag calculationDragos Tatulea1-1/+1
needs_teardown is a device flag that indicates when virtual queues need to be recreated. This happens for certain configuration changes: queue size and some specific features. Currently, the needs_teardown state can be incorrectly reset by subsequent .set_vq_num() calls. For example, for 1 rx VQ with size 512 and 1 tx VQ with size 256: .set_vq_num(0, 512) -> sets needs_teardown to true (rx queue has a non-default size) .set_vq_num(1, 256) -> sets needs_teardown to false (tx queue has a default size) This change takes into account the previous value of the needs_teardown flag when re-calculating it during VQ size configuration. Fixes: 0fe963d6fc16 ("vdpa/mlx5: Re-create HW VQs under certain conditions") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com> Tested-by: Si-Wei Liu<si-wei.liu@oracle.com> Message-Id: <20250604184802.2625300-1-dtatulea@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2025-08-01vhost: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...))Pei Xiao1-1/+1
cocci warning: ./kernel/vhost_task.c:148:9-16: WARNING: ERR_CAST can be used with tsk Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)). Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn> Message-Id: <1a8499a5da53e4f72cf21aca044ae4b26db8b2ad.1749020055.git.xiaopei01@kylinos.cn> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-08-01virtio: Fix typo in register_virtio_device() doc commentAlok Tiwari1-1/+1
Corrected "suceess" to "success" in the function documentation for clarity. Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20250529084350.3145699-1-alok.a.tiwari@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
2025-08-01virtio-vdpa: Remove virtqueue listViresh Kumar1-41/+3
The virtio vdpa implementation creates a list of virtqueues, while the same is already available in the struct virtio_device. This list is never traversed though, and only the pointer to the struct virtio_vdpa_vq_info is used in the callback, where the virtqueue pointer could be directly used. Remove the unwanted code to simplify the driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Message-Id: <7808f2f7e484987b95f172fffb6c71a5da20ed1e.1748503784.git.viresh.kumar@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com>
2025-08-01virtio-mmio: Remove virtqueue list from mmio deviceViresh Kumar2-50/+4
The MMIO transport implementation creates a list of virtqueues for a virtio device, while the same is already available in the struct virtio_device. Don't create a duplicate list, and use the other one instead. While at it, fix the virtio_device_for_each_vq() macro to accept an argument like "&vm_dev->vdev" (which currently fails to build). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Message-Id: <3e56c6f74002987e22f364d883cbad177cd9ad9c.1747827066.git.viresh.kumar@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2025-08-01virtio: document ENOSPCMichael S. Tsirkin1-0/+4
drivers handle ENOSPC specially since it's an error one can get from a working VQ. Document the semantics. Message-Id: <2e6ec46b8d5e6755be291cec8e2ec57ef286e97b.1748356035.git.mst@redhat.com> Reported-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Parav Pandit <parav@nvidia.com>
2025-08-01drm/virtio: implement virtio_gpu_shutdownGerd Hoffmann1-4/+4
Calling drm_dev_unplug() is the drm way to say the device is gone and can not be accessed any more. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20250507082821.2710706-1-kraxel@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-08-01virtio: fix comments, readabilityMichael S. Tsirkin1-2/+3
Fix a couple of comments to match reality. Initialize config_driver_disabled to be consistent with other fields (note: the structure is already zero initialized, so this is not a bugfix as such). Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <7b74a55a5f3dc066d954472f5b68c29022f11b43.1752094439.git.mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2025-07-13Linux 6.16-rc6v6.16-rc6Linus Torvalds1-1/+1
2025-07-11Revert "eventpoll: Fix priority inversion problem"Linus Torvalds1-134/+324
This reverts commit 8c44dac8add7503c345c0f6c7962e4863b88ba42. I haven't figured out what the actual bug in this commit is, but I did spend a lot of time chasing it down and eventually succeeded in bisecting it down to this. For some reason, this eventpoll commit ends up causing delays and stuck user space processes, but it only happens on one of my machines, and only during early boot or during the flurry of initial activity when logging in. I must be triggering some very subtle timing issue, but once I figured out the behavior pattern that made it reasonably reliable to trigger, it did bisect right to this, and reverting the commit fixes the problem. Of course, that was only after I had failed at bisecting it several times, and had flailed around blaming both the drm people and the netlink people for the odd problems. The most obvious of which happened at the time of the first graphical login (the most common symptom being that some gnome app aborted due to a 30s timeout, often leading to the whole session then failing if it was some critical component like gnome-shell or similar). Acked-by: Nam Cao <namcao@linutronix.de> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Christian Brauner <brauner@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-07-12erofs: fix large fragment handlingGao Xiang3-7/+8
Fragments aren't limited by Z_EROFS_PCLUSTER_MAX_DSIZE. However, if a fragment's logical length is larger than Z_EROFS_PCLUSTER_MAX_DSIZE but the fragment is not the whole inode, it currently returns -EOPNOTSUPP because m_flags has the wrong EROFS_MAP_ENCODED flag set. It is not intended by design but should be rare, as it can only be reproduced by mkfs with `-Eall-fragments` in a specific case. Let's normalize fragment m_flags using the new EROFS_MAP_FRAGMENT. Reported-by: Axel Fontaine <axel@axelfontaine.com> Closes: https://github.com/erofs/erofs-utils/issues/23 Fixes: 7c3ca1838a78 ("erofs: restrict pcluster size limitations") Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Link: https://lore.kernel.org/r/20250711195826.3601157-1-hsiangkao@linux.alibaba.com
2025-07-11netlink: make sure we allow at least one dump skbJakub Kicinski1-2/+3
Commit under Fixes tightened up the memory accounting for Netlink sockets. Looks like the accounting is too strict for some existing use cases, Marek reported issues with nl80211 / WiFi iw CLI. To reduce number of iterations Netlink dumps try to allocate messages based on the size of the buffer passed to previous recvmsg() calls. If user space uses a larger buffer in recvmsg() than sk_rcvbuf we will allocate an skb we won't be able to queue. Make sure we always allow at least one skb to be queued. Same workaround is already present in netlink_attachskb(). Alternative would be to cap the allocation size to rcvbuf - rmem_alloc but as I said, the workaround is already present in other places. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/9794af18-4905-46c6-b12c-365ea2f05858@samsung.com Fixes: ae8f160e7eb2 ("netlink: Fix wraparounds of sk->sk_rmem_alloc.") Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250711001121.3649033-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11netlink: Fix rmem check in netlink_broadcast_deliver().Kuniyuki Iwashima1-1/+1
We need to allow queuing at least one skb even when skb is larger than sk->sk_rcvbuf. The cited commit made a mistake while converting a condition in netlink_broadcast_deliver(). Let's correct the rmem check for the allow-one-skb rule. Fixes: ae8f160e7eb24 ("netlink: Fix wraparounds of sk->sk_rmem_alloc.") Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250711053208.2965945-1-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11bnxt_en: Set DMA unmap len correctly for XDP_REDIRECTSomnath Kotur1-1/+1
When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set() with the proper length instead of 0. This bug triggers this warning on a system with IOMMU enabled: WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170 RIP: 0010:__iommu_dma_unmap+0x159/0x170 Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45 b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00 RSP: 0018:ff22d31181150c88 EFLAGS: 00010206 RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000 R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000 R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00 FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0 PKRU: 55555554 Call Trace: <IRQ> ? show_regs+0x6d/0x80 ? __warn+0x89/0x160 ? __iommu_dma_unmap+0x159/0x170 ? report_bug+0x17e/0x1b0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x18/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? __iommu_dma_unmap+0x159/0x170 ? __iommu_dma_unmap+0xb3/0x170 iommu_dma_unmap_page+0x4f/0x100 dma_unmap_page_attrs+0x52/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? xdp_return_frame+0x2e/0xd0 bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en] __bnxt_poll_work_done+0x81/0x1e0 [bnxt_en] bnxt_poll+0xd3/0x1e0 [bnxt_en] Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250710213938.1959625-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11bnxt_en: Flush FW trace before copying to the coredumpShruti Parab1-7/+11
bnxt_fill_drv_seg_record() calls bnxt_dbg_hwrm_log_buffer_flush() to flush the FW trace buffer. This needs to be done before we call bnxt_copy_ctx_mem() to copy the trace data. Without this fix, the coredump may not contain all the FW traces. Fixes: 3c2179e66355 ("bnxt_en: Add FW trace coredump segments to the coredump") Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Shruti Parab <shruti.parab@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250710213938.1959625-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11bnxt_en: Fix DCB ETS validationShravya KN1-0/+2
In bnxt_ets_validate(), the code incorrectly loops over all possible traffic classes to check and add the ETS settings. Fix it to loop over the configured traffic classes only. The unconfigured traffic classes will default to TSA_ETS with 0 bandwidth. Looping over these unconfigured traffic classes may cause the validation to fail and trigger this error message: "rejecting ETS config starving a TC\n" The .ieee_setets() will then fail. Fixes: 7df4ae9fe855 ("bnxt_en: Implement DCBNL to support host-based DCBX.") Reviewed-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Shravya KN <shravya.k-n@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250710213938.1959625-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net: ll_temac: Fix missing tx_pending check in ethtools_set_ringparam()Alok Tiwari1-1/+1
The function ll_temac_ethtools_set_ringparam() incorrectly checked rx_pending twice, once correctly for RX and once mistakenly in place of tx_pending. This caused tx_pending to be left unchecked against TX_BD_NUM_MAX. As a result, invalid TX ring sizes may have been accepted or valid ones wrongly rejected based on the RX limit, leading to potential misconfiguration or unexpected results. This patch corrects the condition to properly validate tx_pending. Fixes: f7b261bfc35e ("net: ll_temac: Make RX/TX ring sizes configurable") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Link: https://patch.msgid.link/20250710180621.2383000-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net/mlx5e: Add new prio for promiscuous modeJianbo Liu3-7/+17
An optimization for promiscuous mode adds a high-priority steering table with a single catch-all rule to steer all traffic directly to the TTC table. However, a gap exists between the creation of this table and the insertion of the catch-all rule. Packets arriving in this brief window would miss as no rule was inserted yet, unnecessarily incrementing the 'rx_steer_missed_packets' counter and dropped. This patch resolves the issue by introducing a new prio for this table, placing it between MLX5E_TC_PRIO and MLX5E_NIC_PRIO. By doing so, packets arriving during the window now fall through to the next prio (at MLX5E_NIC_PRIO) instead of being dropped. Fixes: 1c46d7409f30 ("net/mlx5e: Optimize promiscuous mode") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/1752155624-24095-4-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net/mlx5e: Fix race between DIM disable and net_dim()Carolina Jubran1-2/+2
There's a race between disabling DIM and NAPI callbacks using the dim pointer on the RQ or SQ. If NAPI checks the DIM state bit and sees it still set, it assumes `rq->dim` or `sq->dim` is valid. But if DIM gets disabled right after that check, the pointer might already be set to NULL, leading to a NULL pointer dereference in net_dim(). Fix this by calling `synchronize_net()` before freeing the DIM context. This ensures all in-progress NAPI callbacks are finished before the pointer is cleared. Kernel log: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:net_dim+0x23/0x190 ... Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? common_interrupt+0xf/0xa0 ? sysvec_call_function_single+0xb/0x90 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? net_dim+0x23/0x190 ? mlx5e_poll_ico_cq+0x41/0x6f0 [mlx5_core] ? sysvec_apic_timer_interrupt+0xb/0x90 mlx5e_handle_rx_dim+0x92/0xd0 [mlx5_core] mlx5e_napi_poll+0x2cd/0xac0 [mlx5_core] ? mlx5e_poll_ico_cq+0xe5/0x6f0 [mlx5_core] busy_poll_stop+0xa2/0x200 ? mlx5e_napi_poll+0x1d9/0xac0 [mlx5_core] ? mlx5e_trigger_irq+0x130/0x130 [mlx5_core] __napi_busy_loop+0x345/0x3b0 ? sysvec_call_function_single+0xb/0x90 ? asm_sysvec_call_function_single+0x16/0x20 ? sysvec_apic_timer_interrupt+0xb/0x90 ? pcpu_free_area+0x1e4/0x2e0 napi_busy_loop+0x11/0x20 xsk_recvmsg+0x10c/0x130 sock_recvmsg+0x44/0x70 __sys_recvfrom+0xbc/0x130 ? __schedule+0x398/0x890 __x64_sys_recvfrom+0x20/0x30 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ... ---[ end trace 0000000000000000 ]--- ... ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: 445a25f6e1a2 ("net/mlx5e: Support updating coalescing configuration without resetting channels") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/1752155624-24095-3-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net/mlx5: Reset bw_share field when changing a node's parentCarolina Jubran1-0/+1
When changing a node's parent, its scheduling element is destroyed and re-created with bw_share 0. However, the node's bw_share field was not updated accordingly. Set the node's bw_share to 0 after re-creation to keep the software state in sync with the firmware configuration. Fixes: 9c7bbf4c3304 ("net/mlx5: Add support for setting parent of nodes") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/1752155624-24095-2-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11MAINTAINERS: Update Kirill Shutemov's email address for TDXKirill A. Shutemov2-1/+2
Update MAINTAINERS to use my @kernel.org email address. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/all/20250708101922.50560-4-kirill.shutemov%40linux.intel.com
2025-07-11can: m_can: m_can_handle_lost_msg(): downgrade msg lost in rx message to ↵Sean Nyekjaer1-1/+1
debug level Downgrade the "msg lost in rx" message to debug level, to prevent flooding the kernel log with error messages. Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support") Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Sean Nyekjaer <sean@geanix.com> Link: https://patch.msgid.link/20250711-mcan_ratelimit-v3-1-7413e8e21b84@geanix.com [mkl: enhance commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-07-11MAINTAINERS: remove bouncing address for Nandor HanBartosz Golaszewski1-7/+0
Nandor's address has been bouncing for some time now. Remove it from MAINTAINERS. The affected driver falls under the wider umbrella of GPIO modules. Link: https://lore.kernel.org/r/20250709071825.16212-1-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-07-10drm/xe/guc: Default log level to non-verboseLucas De Marchi1-1/+1
Currently xe sets the guc log level to a verbose level since it's useful to debug hangs and general development. However the verbose level may already be too much and affect performance. Michal Mrozek did some tests with the L0 compute stack for submission latency with ULLS disabled. Below are the normalized numbers with log level 3 (the current default) as baseline for each test: Test \ Log Level 3 0 1 2 ----------------------------------------------------------- ------ ------ ------ ------ BestWalkerNthCommandListSubmission(CmdListCount=2) 1.00 0.63 0.63 0.96 BestWalkerNthSubmission(KernelCount=2) 1.00 0.62 0.63 0.96 BestWalkerNthSubmissionImmediate(KernelCount=2) 1.00 0.58 0.58 0.85 BestWalkerSubmission 1.00 0.62 0.62 0.96 BestWalkerSubmissionImmediate 1.00 0.63 0.62 0.96 BestWalkerSubmissionImmediateMultiCmdlists(cmdlistCount=2) 1.00 0.58 0.58 0.86 BestWalkerSubmissionImmediateMultiCmdlists(cmdlistCount=4) 1.00 0.70 0.70 0.83 BestWalkerSubmissionImmediateMultiCmdlists(cmdlistCount=8) 1.00 0.53 0.52 0.78 Log level 2 is the first "verbose level" for GuC, where the biggest difference happens. Keep log level 3 for CONFIG_DRM_XE_DEBUG, but switch to 1, i.e. GUC_LOG_LEVEL_NON_VERBOSE, for "normal" builds. Cc: Michal Mrozek <michal.mrozek@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://lore.kernel.org/r/20250613-guc-log-level-v2-1-cb84a63e49fe@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit a37128ba613ad6a5f81f382fa3cfe5c4a6527310) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-10drm/xe/bmg: Don't use WA 16023588340 and 22019338487 on VFMichal Wajdeczko1-2/+2
These workarounds are not applicable for use by the VFs. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Tested-by: Jakub Kolakowski <jakub1.kolakowski@intel.com> Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com> Signed-off-by: Jakub Kolakowski <jakub1.kolakowski@intel.com> Link: https://lore.kernel.org/r/20250710103040.375610-2-jakub1.kolakowski@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 1d2e2503e506ddc499cbb7afdc8b70bcf6fe241f) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-10drm/xe/guc: Recommend GuC v70.46.2 for BMG, LNL, DG2Julia Filipchuk1-3/+3
UAPI compatibility version 1.22.2 Resolves various bugs. Recommend newer version. Signed-off-by: Julia Filipchuk <julia.filipchuk@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250626182805.1701096-13-daniele.ceraolospurio@intel.com (cherry picked from commit 0b64addcae7f04745bc5f62d41e27268052f812e) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-10drm/xe/pm: Correct comment of xe_pm_set_vram_threshold()Shuicheng Lin1-3/+5
The parameter threshold is with size in MiB, not in bits. Correct it to avoid any confusion. v2: s/mb/MiB, s/vram/VRAM, fix return section. (Michal) Fixes: 30c399529f4c ("drm/xe: Document Xe PM component") Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com> Link: https://lore.kernel.org/r/20250708021450.3602087-2-shuicheng.lin@intel.com Reviewed-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 0efec0500117947f924e5ac83be40f96378af85a) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-10drm/xe: Release runtime pm for error path of xe_devcoredump_read()Shuicheng Lin1-10/+28
xe_pm_runtime_put() is missed to be called for the error path in xe_devcoredump_read(). Add function description comments for xe_devcoredump_read() to help understand it. v2: more detail function comments and refine goto logic (Matt) Fixes: c4a2e5f865b7 ("drm/xe: Add devcoredump chunking") Cc: stable@vger.kernel.org Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250707004911.3502904-6-shuicheng.lin@intel.com (cherry picked from commit 017ef1228d735965419ff118fe1b89089e772c42) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-10drm/xe/pm: Restore display pm if there is error after display suspendShuicheng Lin1-2/+1
xe_bo_evict_all() is called after xe_display_pm_suspend(). So if there is error with xe_bo_evict_all(), display pm should be restored. Fixes: 51462211f4a9 ("drm/xe/pxp: add PXP PM support") Fixes: cb8f81c17531 ("drm/xe/display: Make display suspend/resume work on discrete") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://lore.kernel.org/r/20250708035424.3608190-2-shuicheng.lin@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 83dcee17855c4e5af037ae3262809036de127903) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-10selftests: net: lib: fix shift count out of rangeHangbin Liu1-1/+1
I got the following warning when writing other tests: + handle_test_result_pass 'bond 802.3ad' '(lacp_active off)' + local 'test_name=bond 802.3ad' + shift + local 'opt_str=(lacp_active off)' + shift + log_test_result 'bond 802.3ad' '(lacp_active off)' ' OK ' + local 'test_name=bond 802.3ad' + shift + local 'opt_str=(lacp_active off)' + shift + local 'result= OK ' + shift + local retmsg= + shift /net/tools/testing/selftests/net/forwarding/../lib.sh: line 315: shift: shift count out of range This happens because an extra shift is executed even after all arguments have been consumed. Remove the last shift in log_test_result() to avoid this warning. Fixes: a923af1ceee7 ("selftests: forwarding: Convert log_test() to recognize RET values") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20250709091244.88395-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2026-01-06 01:42:14 +0000