aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/stackcollapse.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2025-08-06drm/amdgpu/discovery: fix fw based ip discoveryAlex Deucher2-36/+41
We only need the fw based discovery table for sysfs. No need to parse it. Additionally parsing some of the board specific tables may result in incorrect data on some boards. just load the binary and don't parse it on those boards. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4441 Fixes: 80a0e8282933 ("drm/amdgpu/discovery: optionally use fw based ip discovery") Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 62eedd150fa11aefc2d377fc746633fdb1baeb55) Cc: stable@vger.kernel.org
2025-08-06drm/amdkfd: Destroy KFD debugfs after destroy KFD wqAmber Lin1-1/+1
Since KFD proc content was moved to kernel debugfs, we can't destroy KFD debugfs before kfd_process_destroy_wq. Move kfd_process_destroy_wq prior to kfd_debugfs_fini to fix a kernel NULL pointer problem. It happens when /sys/kernel/debug/kfd was already destroyed in kfd_debugfs_fini but kfd_process_destroy_wq calls kfd_debugfs_remove_process. This line debugfs_remove_recursive(entry->proc_dentry); tries to remove /sys/kernel/debug/kfd/proc/<pid> while /sys/kernel/debug/kfd is already gone. It hangs the kernel by kernel NULL pointer. Signed-off-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Eric Huang <jinhuieric.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 0333052d90683d88531558dcfdbf2525cc37c233) Cc: stable@vger.kernel.org
2025-08-06amdgpu/amdgpu_discovery: increase timeout limit for IFWI initXaver Hugl1-2/+2
With a timeout of only 1 second, my rx 5700XT fails to initialize, so this increases the timeout to 2s. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3697 Signed-off-by: Xaver Hugl <xaver.hugl@kde.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 9ed3d7bdf2dcdf1a1196630fab89a124526e9cc2) Cc: stable@vger.kernel.org
2025-08-06HID: hid-steam: Use new BTN_GRIP* buttonsVicki Pfau1-19/+16
Make use of the newly defined BTN_GRIP* codes instead of using BTN_TRIGGER_HAPPY* and other less suited button codes. Signed-off-by: Vicki Pfau <vi@endrift.com> Acked-by: Jiri Kosina <jkosina@suse.com> Link: https://lore.kernel.org/r/20250717000143.1902875-4-vi@endrift.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-08-06btrfs: fix log tree replay failure due to file with 0 links and extentsFilipe Manana1-18/+30
If we log a new inode (not persisted in a past transaction) that has 0 links and extents, then log another inode with an higher inode number, we end up with failing to replay the log tree with -EINVAL. The steps for this are: 1) create new file A 2) write some data to file A 3) open an fd on file A 4) unlink file A 5) fsync file A using the previously open fd 6) create file B (has higher inode number than file A) 7) fsync file B 8) power fail before current transaction commits Now when attempting to mount the fs, the log replay will fail with -ENOENT at replay_one_extent() when attempting to replay the first extent of file A. The failure comes when trying to open the inode for file A in the subvolume tree, since it doesn't exist. Before commit 5f61b961599a ("btrfs: fix inode lookup error handling during log replay"), the returned error was -EIO instead of -ENOENT, since we converted any errors when attempting to read an inode during log replay to -EIO. The reason for this is that the log replay procedure fails to ignore the current inode when we are at the stage LOG_WALK_REPLAY_ALL, our current inode has 0 links and last inode we processed in the previous stage has a non 0 link count. In other words, the issue is that at replay_one_extent() we only update wc->ignore_cur_inode if the current replay stage is LOG_WALK_REPLAY_INODES. Fix this by updating wc->ignore_cur_inode whenever we find an inode item regardless of the current replay stage. This is a simple solution and easy to backport, but later we can do other alternatives like avoid logging extents or inode items other than the inode item for inodes with a link count of 0. The problem with the wc->ignore_cur_inode logic has been around since commit f2d72f42d5fa ("Btrfs: fix warning when replaying log after fsync of a tmpfile") but it only became frequent to hit since the more recent commit 5e85262e542d ("btrfs: fix fsync of files with no hard links not persisting deletion"), because we stopped skipping inodes with a link count of 0 when logging, while before the problem would only be triggered if trying to replay a log tree created with an older kernel which has a logged inode with 0 links. A test case for fstests will be submitted soon. Reported-by: Peter Jung <ptr1337@cachyos.org> Link: https://lore.kernel.org/linux-btrfs/fce139db-4458-4788-bb97-c29acf6cb1df@cachyos.org/ Reported-by: burneddi <burneddi@protonmail.com> Link: https://lore.kernel.org/linux-btrfs/lh4W-Lwc0Mbk-QvBhhQyZxf6VbM3E8VtIvU3fPIQgweP_Q1n7wtlUZQc33sYlCKYd-o6rryJQfhHaNAOWWRKxpAXhM8NZPojzsJPyHMf2qY=@protonmail.com/#t Reported-by: Russell Haley <yumpusamongus@gmail.com> Link: https://lore.kernel.org/linux-btrfs/598ecc75-eb80-41b3-83c2-f2317fbb9864@gmail.com/ Fixes: f2d72f42d5fa ("Btrfs: fix warning when replaying log after fsync of a tmpfile") CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-08-06media: venus: Fix OPP table error handlingSasha Levin1-4/+8
The venus driver fails to check if dev_pm_opp_find_freq_{ceil,floor}() returns an error pointer before calling dev_pm_opp_put(). This causes a crash when OPP tables are not present in device tree. Unable to handle kernel access to user memory outside uaccess routines at virtual address 000000000000002e ... pc : dev_pm_opp_put+0x1c/0x4c lr : core_clks_enable+0x4c/0x16c [venus_core] Add IS_ERR() checks before calling dev_pm_opp_put() to avoid dereferencing error pointers. Fixes: b179234b5e59 ("media: venus: pm_helpers: use opp-table for the frequency") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-08-06net: usbnet: Fix the wrong netif_carrier_on() callAmmar Faizi1-3/+3
The commit referenced in the Fixes tag causes usbnet to malfunction (identified via git bisect). Post-commit, my external RJ45 LAN cable fails to connect. Linus also reported the same issue after pulling that commit. The code has a logic error: netif_carrier_on() is only called when the link is already on. Fix this by moving the netif_carrier_on() call outside the if-statement entirely. This ensures it is always called when EVENT_LINK_CARRIER_ON is set and properly clears it regardless of the link state. Cc: stable@vger.kernel.org Cc: Armando Budianto <sprite@gnuweeb.org> Reviewed-by: Simon Horman <horms@kernel.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/all/CAHk-=wjqL4uF0MG_c8+xHX1Vv8==sPYQrtzbdA3kzi96284nuQ@mail.gmail.com Closes: https://lore.kernel.org/netdev/CAHk-=wjKh8X4PT_mU1kD4GQrbjivMfPn-_hXa6han_BTDcXddw@mail.gmail.com Closes: https://lore.kernel.org/netdev/0752dee6-43d6-4e1f-81d2-4248142cccd2@gnuweeb.org Fixes: 0d9cfc9b8cb1 ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event") Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-08-06MAINTAINERS: hand over Kbuild maintenanceMasahiro Yamada2-8/+11
I'm stepping down as the maintainer of Kbuild/Kconfig. It was enjoyable to refactor and improve the kernel build system, but due to personal reasons, I believe it's difficult for me to continue in this role any further. I discussed this off-list with Nathan and Nicolas, and they have kindly agreed to take over the maintenance of Kbuild with Odd Fixes. I'm grateful to them for stepping in. As for Kconfig, there are currently no designated reviewers, so the maintainer position will remain vacant for now. I hope someone will step up to take on the role. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Nicolas Schier <nicolas@fjasle.eu>
2025-08-06kheaders: make it possible to override TARMichał Górny2-4/+5
Commit 86cdd2fdc4e3 ("kheaders: make headers archive reproducible") introduced a number of options specific to GNU tar to the `tar` invocation in `gen_kheaders.sh` script. This causes the script to fail to work on systems where `tar` is not GNU tar. This can occur e.g. on recent Gentoo Linux installations that support using bsdtar from libarchive instead. Add a `TAR` make variable to make it possible to override the tar executable used, e.g. by specifying: make TAR=gtar Link: https://bugs.gentoo.org/884061 Reported-by: Sam James <sam@gentoo.org> Tested-by: Sam James <sam@gentoo.org> Co-developed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Michał Górny <mgorny@gentoo.org> Signed-off-by: Sam James <sam@gentoo.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2025-08-06kbuild: userprogs: use correct linker when mixing clang and GNU ldThomas Weißschuh1-1/+1
The userprogs infrastructure does not expect clang being used with GNU ld and in that case uses /usr/bin/ld for linking, not the configured $(LD). This fallback is problematic as it will break when cross-compiling. Mixing clang and GNU ld is used for example when building for SPARC64, as ld.lld is not sufficient; see Documentation/kbuild/llvm.rst. Relax the check around --ld-path so it gets used for all linkers. Fixes: dfc1b168a8c4 ("kbuild: userprogs: use correct lld when linking through clang") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2025-08-06kconfig: lxdialog: replace strcpy() with strncpy() in inputbox.cSuchit Karunakaran1-2/+4
strcpy() performs no bounds checking and can lead to buffer overflows if the input string exceeds the destination buffer size. This patch replaces it with strncpy(), and null terminates the input string. Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com> Reviewed-by: Nicolas Schier <nicolas.schier@linux.dev> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2025-08-06kconfig: lxdialog: replace strcpy with snprintf in print_autowrapSuchit Karunakaran1-2/+1
strcpy() does not perform bounds checking and can lead to buffer overflows if the source string exceeds the destination buffer size. In print_autowrap(), replace strcpy() with snprintf() to safely copy the prompt string into the fixed-size tempstr buffer. Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2025-08-05vfio/type1: conditional rescheduling while pinningKeith Busch1-0/+7
A large DMA mapping request can loop through dma address pinning for many pages. In cases where THP can not be used, the repeated vmf_insert_pfn can be costly, so let the task reschedule as need to prevent CPU stalls. Failure to do so has potential harmful side effects, like increased memory pressure as unrelated rcu tasks are unable to make their reclaim callbacks and result in OOM conditions. rcu: INFO: rcu_sched self-detected stall on CPU rcu: 36-....: (20999 ticks this GP) idle=b01c/1/0x4000000000000000 softirq=35839/35839 fqs=3538 rcu: hardirqs softirqs csw/system rcu: number: 0 107 0 rcu: cputime: 50 0 10446 ==> 10556(ms) rcu: (t=21075 jiffies g=377761 q=204059 ncpus=384) ... <TASK> ? asm_sysvec_apic_timer_interrupt+0x16/0x20 ? walk_system_ram_range+0x63/0x120 ? walk_system_ram_range+0x46/0x120 ? pgprot_writethrough+0x20/0x20 lookup_memtype+0x67/0xf0 track_pfn_insert+0x20/0x40 vmf_insert_pfn_prot+0x88/0x140 vfio_pci_mmap_huge_fault+0xf9/0x1b0 [vfio_pci_core] __do_fault+0x28/0x1b0 handle_mm_fault+0xef1/0x2560 fixup_user_fault+0xf5/0x270 vaddr_get_pfns+0x169/0x2f0 [vfio_iommu_type1] vfio_pin_pages_remote+0x162/0x8e0 [vfio_iommu_type1] vfio_iommu_type1_ioctl+0x1121/0x1810 [vfio_iommu_type1] ? futex_wake+0x1c1/0x260 x64_sys_call+0x234/0x17a0 do_syscall_64+0x63/0x130 ? exc_page_fault+0x63/0x130 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20250715184622.3561598-1-kbusch@meta.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2025-08-05vfio/qat: add support for intel QAT 6xxx virtual functionsMałgorzata Mielnik1-1/+3
Extend the qat_vfio_pci variant driver to support QAT 6xxx Virtual Functions (VFs). Add the relevant QAT 6xxx VF device IDs to the driver's probe table, enabling proper detection and initialization of these devices. Update the module description to reflect that the driver now supports all QAT generations. Signed-off-by: Małgorzata Mielnik <malgorzata.mielnik@intel.com> Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Link: https://lore.kernel.org/r/20250715081150.1244466-1-suman.kumar.chakraborty@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2025-08-05vfio/qat: Remove myself from VFIO QAT PCI driver maintainersXin Zeng1-1/+0
Remove myself from VFIO QAT PCI driver maintainers as I'm leaving Intel. Signed-off-by: Xin Zeng <xin.zeng@intel.com> Link: https://lore.kernel.org/r/20250715001357.33725-1-xin.zeng@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2025-08-05vfio/pci: Do vf_token checks for VFIO_DEVICE_BIND_IOMMUFDJason Gunthorpe12-12/+76
This was missed during the initial implementation. The VFIO PCI encodes the vf_token inside the device name when opening the device from the group FD, something like: "0000:04:10.0 vf_token=bd8d9d2b-5a5f-4f5a-a211-f591514ba1f3" This is used to control access to a VF unless there is co-ordination with the owner of the PF. Since we no longer have a device name in the cdev path, pass the token directly through VFIO_DEVICE_BIND_IOMMUFD using an optional field indicated by VFIO_DEVICE_BIND_FLAG_TOKEN. Fixes: 5fcc26969a16 ("vfio: Add VFIO_DEVICE_BIND_IOMMUFD") Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Yi Liu <yi.l.liu@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/0-v3-bdd8716e85fe+3978a-vfio_token_jgg@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2025-08-05Input: add keycode for performance mode keyMarcos Alano1-0/+3
Alienware calls this key "Performance Boost". Dell calls it "G-Mode". The goal is to have a specific keycode to detect when this key is pressed, so userspace can act upon it and do what have to do, usually starting the power profile for performance. Signed-off-by: Marcos Alano <marcoshalano@gmail.com> Link: https://lore.kernel.org/r/20250509193708.2190586-1-marcoshalano@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-08-05selftests/perf_events: Add a mmap() correctness testLorenzo Stoakes3-1/+238
Exercise various mmap(), munmap() and mremap() invocations, which might cause a perf buffer mapping to be split or truncated. To avoid hard coding the perf event and having dependencies on architectures and configuration options, scan through event types in sysfs and try to open them. On success, try to mmap() and if that succeeds try to mmap() the AUX buffer. In case that no AUX buffer supporting event is found, only test the base buffer mapping. If no mappable event is found or permissions are not sufficient, skip the tests. Reserve a PROT_NONE region for both rb and aux tests to allow testing the case where mremap unmaps beyond the end of a mapped VMA to prevent it from unmapping unrelated mappings. Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Co-developed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
2025-08-05perf/core: Prevent VMA split of buffer mappingsThomas Gleixner1-0/+10
The perf mmap code is careful about mmap()'ing the user page with the ringbuffer and additionally the auxiliary buffer, when the event supports it. Once the first mapping is established, subsequent mapping have to use the same offset and the same size in both cases. The reference counting for the ringbuffer and the auxiliary buffer depends on this being correct. Though perf does not prevent that a related mapping is split via mmap(2), munmap(2) or mremap(2). A split of a VMA results in perf_mmap_open() calls, which take reference counts, but then the subsequent perf_mmap_close() calls are not longer fulfilling the offset and size checks. This leads to reference count leaks. As perf already has the requirement for subsequent mappings to match the initial mapping, the obvious consequence is that VMA splits, caused by resizing of a mapping or partial unmapping, have to be prevented. Implement the vm_operations_struct::may_split() callback and return unconditionally -EINVAL. That ensures that the mapping offsets and sizes cannot be changed after the fact. Remapping to a different fixed address with the same size is still possible as it takes the references for the new mapping and drops those of the old mapping. Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams") Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27504 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: stable@vger.kernel.org
2025-08-05perf/core: Handle buffer mapping fail correctly in perf_mmap()Thomas Gleixner1-2/+10
After successful allocation of a buffer or a successful attachment to an existing buffer perf_mmap() tries to map the buffer read only into the page table. If that fails, the already set up page table entries are zapped, but the other perf specific side effects of that failure are not handled. The calling code just cleans up the VMA and does not invoke perf_mmap_close(). This leaks reference counts, corrupts user->vm accounting and also results in an unbalanced invocation of event::event_mapped(). Cure this by moving the event::event_mapped() invocation before the map_range() call so that on map_range() failure perf_mmap_close() can be invoked without causing an unbalanced event::event_unmapped() call. perf_mmap_close() undoes the reference counts and eventually frees buffers. Fixes: b709eb872e19 ("perf: map pages in advance") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: stable@vger.kernel.org
2025-08-05perf/core: Exit early on perf_mmap() failThomas Gleixner1-2/+4
When perf_mmap() fails to allocate a buffer, it still invokes the event_mapped() callback of the related event. On X86 this might increase the perf_rdpmc_allowed reference counter. But nothing undoes this as perf_mmap_close() is never called in this case, which causes another reference count leak. Return early on failure to prevent that. Fixes: 1e0fb9ec679c ("perf: Add pmu callbacks to track event mapping and unmapping") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: stable@vger.kernel.org
2025-08-05perf/core: Don't leak AUX buffer refcount on allocation failureThomas Gleixner1-3/+4
Failure of the AUX buffer allocation leaks the reference count. Set the reference count to 1 only when the allocation succeeds. Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: stable@vger.kernel.org
2025-08-05perf/core: Preserve AUX buffer allocation failure resultThomas Gleixner1-2/+1
A recent overhaul sets the return value to 0 unconditionally after the allocations, which causes reference count leaks and corrupts the user->vm accounting. Preserve the AUX buffer allocation failure return value, so that the subsequent code works correctly. Fixes: 0983593f32c4 ("perf/core: Lift event->mmap_mutex in perf_mmap()") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: stable@vger.kernel.org
2025-08-05RDMA/siw: Fix the sendmsg byte count in siw_tcp_sendpagesPedro Falcato1-3/+2
Ever since commit c2ff29e99a76 ("siw: Inline do_tcp_sendpages()"), we have been doing this: static int siw_tcp_sendpages(struct socket *s, struct page **page, int offset, size_t size) [...] /* Calculate the number of bytes we need to push, for this page * specifically */ size_t bytes = min_t(size_t, PAGE_SIZE - offset, size); /* If we can't splice it, then copy it in, as normal */ if (!sendpage_ok(page[i])) msg.msg_flags &= ~MSG_SPLICE_PAGES; /* Set the bvec pointing to the page, with len $bytes */ bvec_set_page(&bvec, page[i], bytes, offset); /* Set the iter to $size, aka the size of the whole sendpages (!!!) */ iov_iter_bvec(&msg.msg_iter, ITER_SOURCE, &bvec, 1, size); try_page_again: lock_sock(sk); /* Sendmsg with $size size (!!!) */ rv = tcp_sendmsg_locked(sk, &msg, size); This means we've been sending oversized iov_iters and tcp_sendmsg calls for a while. This has a been a benign bug because sendpage_ok() always returned true. With the recent slab allocator changes being slowly introduced into next (that disallow sendpage on large kmalloc allocations), we have recently hit out-of-bounds crashes, due to slight differences in iov_iter behavior between the MSG_SPLICE_PAGES and "regular" copy paths: (MSG_SPLICE_PAGES) skb_splice_from_iter iov_iter_extract_pages iov_iter_extract_bvec_pages uses i->nr_segs to correctly stop in its tracks before OoB'ing everywhere skb_splice_from_iter gets a "short" read (!MSG_SPLICE_PAGES) skb_copy_to_page_nocache copy=iov_iter_count [...] copy_from_iter /* this doesn't help */ if (unlikely(iter->count < len)) len = iter->count; iterate_bvec ... and we run off the bvecs Fix this by properly setting the iov_iter's byte count, plus sending the correct byte count to tcp_sendmsg_locked. Link: https://patch.msgid.link/r/20250729120348.495568-1-pfalcato@suse.de Cc: stable@vger.kernel.org Fixes: c2ff29e99a76 ("siw: Inline do_tcp_sendpages()") Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202507220801.50a7210-lkp@intel.com Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Pedro Falcato <pfalcato@suse.de> Acked-by: Bernard Metzler <bernard.metzler@linux.dev> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-08-05LoongArch: vDSO: Remove -nostdlib complier flagWentao Guan1-1/+1
Since $(LD) is directly used, hence -nostdlib is unneeded, MIPS has removed this, we should remove it too. bdbf2038fbf4 ("MIPS: VDSO: remove -nostdlib compiler flag"). In fact, other architectures also use $(LD) now. fe00e50b2db8 ("ARM: 8858/1: vdso: use $(LD) instead of $(CC) to link VDSO") 691efbedc60d ("arm64: vdso: use $(LD) instead of $(CC) to link VDSO") 2ff906994b6c ("MIPS: VDSO: Use $(LD) instead of $(CC) to link VDSO") 2b2a25845d53 ("s390/vdso: Use $(LD) instead of $(CC) to link vDSO") Cc: stable@vger.kernel.org Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn> Signed-off-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-08-05LoongArch: dts: Add eMMC/SDIO controller support to Loongson-2K2000Binbin Zhou2-0/+28
The Loongson-2K2000 integrates one eMMC controller and one SDIO controller. The module is supported now, enable it. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-08-05LoongArch: dts: Add SDIO controller support to Loongson-2K1000Binbin Zhou2-6/+31
The Loongson-2K1000 integrates one SDIO controller for SD storage cards and SDIO cards. The module is supported now, enable it. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-08-05LoongArch: dts: Add SDIO controller support to Loongson-2K0500Binbin Zhou2-2/+35
The Loongson-2K0500 integrates two SDIO controllers for SD storage cards and SDIO cards, supporting SD storage card boot. The module is supported now, enable it. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-08-05LoongArch: BPF: Set bpf_jit_bypass_spec_v1/v4()Tiezhu Yang1-0/+10
JITs can set bpf_jit_bypass_spec_v1/v4() if they want the verifier to skip analysis/patching for the respective vulnerability, it is safe to set both bpf_jit_bypass_spec_v1/v4(), because there is no speculation barrier instruction for LoongArch. Suggested-by: Luis Gerhorst <luis.gerhorst@fau.de> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-08-05LoongArch: BPF: Fix the tailcall hierarchyHaoran Jiang1-48/+107
In specific use cases combining tailcalls and BPF-to-BPF calls， MAX_TAIL_CALL_CNT won't work because of missing tail_call_cnt back-propagation from callee to caller. This patch fixes this tailcall issue caused by abusing the tailcall in bpf2bpf feature on LoongArch like the way of "bpf, x64: Fix tailcall hierarchy". Push tail_call_cnt_ptr and tail_call_cnt into the stack, tail_call_cnt_ptr is passed between tailcall and bpf2bpf, uses tail_call_cnt_ptr to increment tail_call_cnt. Fixes: bb035ef0cc91 ("LoongArch: BPF: Support mixing bpf2bpf and tailcalls") Reviewed-by: Geliang Tang <geliang@kernel.org> Reviewed-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Haoran Jiang <jianghaoran@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-08-05LoongArch: BPF: Fix jump offset calculation in tailcallHaoran Jiang1-16/+5
The extra pass of bpf_int_jit_compile() skips JIT context initialization which essentially skips offset calculation leaving out_offset = -1, so the jmp_offset in emit_bpf_tail_call is calculated by "#define jmp_offset (out_offset - (cur_offset))" is a negative number, which is wrong. The final generated assembly are as follow. 54: bgeu $a2, $t1, -8 # 0x0000004c 58: addi.d $a6, $s5, -1 5c: bltz $a6, -16 # 0x0000004c 60: alsl.d $t2, $a2, $a1, 0x3 64: ld.d $t2, $t2, 264 68: beq $t2, $zero, -28 # 0x0000004c Before apply this patch, the follow test case will reveal soft lock issues. cd tools/testing/selftests/bpf/ ./test_progs --allow=tailcalls/tailcall_bpf2bpf_1 dmesg: watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [test_progs:25056] Cc: stable@vger.kernel.org Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support") Reviewed-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Haoran Jiang <jianghaoran@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-08-05LoongArch: BPF: Add struct ops support for trampolineTiezhu Yang1-25/+50
Use BPF_TRAMP_F_INDIRECT flag to detect struct ops and emit proper prologue and epilogue for this case. With this patch, all of the struct_ops related testcases (except struct_ops_multi_pages) passed on LoongArch. The testcase struct_ops_multi_pages failed is because the actual image_pages_cnt is 40 which is bigger than MAX_TRAMP_IMAGE_PAGES. Before: $ sudo ./test_progs -t struct_ops -d struct_ops_multi_pages ... WATCHDOG: test case struct_ops_module/struct_ops_load executes for 10 seconds... After: $ sudo ./test_progs -t struct_ops -d struct_ops_multi_pages ... #15 bad_struct_ops:OK ... #399 struct_ops_autocreate:OK ... #400 struct_ops_kptr_return:OK ... #401 struct_ops_maybe_null:OK ... #402 struct_ops_module:OK ... #404 struct_ops_no_cfi:OK ... #405 struct_ops_private_stack:SKIP ... #406 struct_ops_refcounted:OK Summary: 8/25 PASSED, 3 SKIPPED, 0 FAILED Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-08-05LoongArch: BPF: Add basic bpf trampoline supportChenghao Duan2-0/+383
BPF trampoline is the critical infrastructure of the BPF subsystem, acting as a mediator between kernel functions and BPF programs. Numerous important features, such as using BPF program for zero overhead kernel introspection, rely on this key component. The related tests have passed, including the following technical points: 1. fentry 2. fmod_ret 3. fexit The following related testcases passed on LoongArch: sudo ./test_progs -a fentry_test/fentry sudo ./test_progs -a fexit_test/fexit sudo ./test_progs -a fentry_fexit sudo ./test_progs -a modify_return sudo ./test_progs -a fexit_sleep sudo ./test_progs -a test_overhead sudo ./test_progs -a trampoline_count This issue was first reported by Geliang Tang in June 2024 while debugging MPTCP BPF selftests on a LoongArch machine (see commit eef0532e900c "selftests/bpf: Null checks for links in bpf_tcp_ca"). Geliang, Huacai, and Tiezhu then worked together to drive the implementation of this feature, encouraging broader collaboration among Chinese kernel engineers. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202507100034.wXofj6VX-lkp@intel.com/ Reported-by: Geliang Tang <geliang@kernel.org> Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn> Tested-by: Vincent Li <vincent.mc.li@gmail.com> Co-developed-by: George Guo <guodongtai@kylinos.cn> Signed-off-by: George Guo <guodongtai@kylinos.cn> Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-08-05LoongArch: BPF: Add dynamic code modification supportChenghao Duan3-1/+151
This commit adds support for BPF dynamic code modification on the LoongArch architecture: 1. Add bpf_arch_text_copy() for instruction block copying. 2. Add bpf_arch_text_poke() for runtime instruction patching. 3. Add bpf_arch_text_invalidate() for code invalidation. On LoongArch, since symbol addresses in the direct mapping region can't be reached via relative jump instructions from the paged mapping region, we use the move_imm+jirl instruction pair as absolute jump instructions. These require 2-5 instructions, so we reserve 5 NOP instructions in the program as placeholders for function jumps. The larch_insn_text_copy() function is solely used for BPF. And the use of larch_insn_text_copy() requires PAGE_SIZE alignment. Currently, only the size of the BPF trampoline is page-aligned. Co-developed-by: George Guo <guodongtai@kylinos.cn> Signed-off-by: George Guo <guodongtai@kylinos.cn> Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-08-05LoongArch: BPF: Rename and refactor validate_code()Chenghao Duan1-1/+9
1. Rename the existing validate_code() to validate_ctx() 2. Factor out the code validation handling into a new helper validate_code() Then: * validate_code() is used to check the validity of code. * validate_ctx() is used to check both code validity and table entry correctness. The new validate_code() will be used in subsequent changes. Reviewed-by: Hengqi Chen <hengqi.chen@gmail.com> Co-developed-by: George Guo <guodongtai@kylinos.cn> Signed-off-by: George Guo <guodongtai@kylinos.cn> Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-08-05vhost: initialize vq->nheads properlyJason Wang1-0/+1
Commit 7918bb2d19c9 ("vhost: basic in order support") introduces vq->nheads to store the number of batched used buffers per used elem but it forgets to initialize the vq->nheads to NULL in vhost_dev_init() this will cause kfree() that would try to free it without be allocated if SET_OWNER is not called. Reported-by: JAEHOON KIM <jhkim@linux.ibm.com> Reported-by: Breno Leitao <leitao@debian.org> Fixes: 45347e79b544 ("vhost: basic in order support") Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20250729073916.80647-1-jasowang@redhat.com> Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Tested-by: Breno Leitao <leitao@debian.org> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Tested-by: Jaehoon Kim <jhkim@linux.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-08-04drm/amdgpu: Update SDMA firmware version check for user queue supportJesse.Zhang1-1/+1
This commit fixes a firmware version check for enabling user queue support in SDMA v7.0. The previous version check (7836028) was incorrect and could lead to issues with PROTECTED_FENCE_SIGNAL commands causing register conflicts between MCU_DBG0 and MCU_DBG1. Fixes: 8c011408ed84 ("drm/amdgpu/sdma7: add ucode version checks for userq support") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 92e2449241516c95aab95eea91faecd0fa2b7ed5) Cc: stable@vger.kernel.org
2025-08-04drm/amdgpu: Add NULL check for asic_funcsLijo Lazar1-1/+2
If driver load fails too early, asic_funcs pointer remains unassigned. Add NULL check to sanitize unwind path. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 582bf7c5158dce16f7dc5b8345b7876bd8031224) Cc: stable@vger.kernel.org
2025-08-04drm/amd/display: Revert "drm/amd/display: Fix AMDGPU_MAX_BL_LEVEL value"Mario Limonciello1-4/+4
This reverts commit 66abb996999de0d440a02583a6e70c2c24deab45. This broke custom brightness curves but it wasn't obvious because of other related changes. Custom brightness curves are always from a 0-255 input signal. The correct fix was to fix the default value which was done by [1]. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4412 Link: https://lore.kernel.org/amd-gfx/0f094c4b-d2a3-42cd-824c-dc2858a5618d@kernel.org/T/#m69f875a7e69aa22df3370b3e3a9e69f4a61fdaf2 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 6ec8a5cbec751625133461600d0d4950ffd3a214) Cc: stable@vger.kernel.org
2025-08-04drm/amd/display: fix a Null pointer dereference vulnerabilitySiyang Liu1-9/+10
[Why] A null pointer dereference vulnerability exists in the AMD display driver's (DC module) cleanup function dc_destruct(). When display control context (dc->ctx) construction fails (due to memory allocation failure), this pointer remains NULL. During subsequent error handling when dc_destruct() is called, there's no NULL check before dereferencing the perf_trace member (dc->ctx->perf_trace), causing a kernel null pointer dereference crash. [How] Check if dc->ctx is non-NULL before dereferencing. Link: https://lore.kernel.org/r/tencent_54FF4252EDFB6533090A491A25EEF3EDBF06@qq.com Co-developed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> (Updated commit text and removed unnecessary error message) Signed-off-by: Siyang Liu <Security@tencent.com> Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 9dd8e2ba268c636c240a918e0a31e6feaee19404) Cc: stable@vger.kernel.org
2025-08-04drm/amd/display: Add primary plane to commits for correct VRR handlingMichel Dänzer1-0/+9
amdgpu_dm_commit_planes calls update_freesync_state_on_stream only for the primary plane. If a commit affects a CRTC but not its primary plane, it would previously not trigger a refresh cycle or affect LFC, violating current UAPI semantics. Fixes e.g. atomic commits affecting only the cursor plane being limited to the minimum refresh rate. Don't do this for the legacy cursor ioctls though, it would break the UAPI semantics for those. Suggested-by: Xaver Hugl <xaver.hugl@kde.org> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3034 Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit cc7bfba95966251b254cb970c21627124da3b7f4) Cc: stable@vger.kernel.org
2025-08-04drm/amdgpu: update mmhub 3.3 client id mappingsAlex Deucher1-1/+104
Update the client id mapping so the correct clients get printed when there is a mmhub page fault. v2: fix typos spotted by David Wu. v3: fix additional typo spotted by David. Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit e932f4779a2d329841bb9ca70bb80a4bb2d707b6) Cc: stable@vger.kernel.org
2025-08-04drm/amdgpu: update mmhub 3.0.1 client id mappingsAlex Deucher1-25/+32
Update the client id mapping so the correct clients get printed when there is a mmhub page fault. Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 2a2681eda73b99a2c1ee8cdb006099ea5d0c2505) Cc: stable@vger.kernel.org
2025-08-04drm/amdgpu: Retain job->vm in amdgpu_job_prepare_jobYuanShang1-7/+0
The field job->vm is used in function amdgpu_job_run to get the page table re-generation counter and decide whether the job should be skipped. Specifically, function amdgpu_vm_generation checks if the VM is valid for this job to use. For instance, if a gfx job depends on a cancelled sdma job from entity vm->delayed, then the gfx job should be skipped. Fixes: 26c95e838e63 ("drm/amdgpu: set the VM pointer to NULL in amdgpu_job_prepare") Signed-off-by: YuanShang <YuanShang.Mao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit ed76936c6b10b547c6df4ca75412331e9ef6d339) Cc: stable@vger.kernel.org
2025-08-04drm/amd/display: Fix DCE 6.0 and 6.4 PLL programming.Timur Kristóf2-14/+25
Apparently, both DCE 6.0 and 6.4 have 3 PLLs, but PLL0 can only be used for DP. Make sure to initialize the correct amount of PLLs in DC for these DCE versions and use PLL0 only for DP. Also, on DCE 6.0 and 6.4, the PLL0 needs to be powered on at initialization as opposed to DCE 6.1 and 7.x which use a different clock source for DFS. The following functions were used as reference from the old radeon driver implementation of DCE 6.x: - radeon_atom_pick_pll - atombios_crtc_set_disp_eng_pll Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 35222b5934ec8d762473592ece98659baf6bc48e) Cc: stable@vger.kernel.org
2025-08-04drm/amd/display: Don't overwrite dce60_clk_mgrTimur Kristóf1-1/+0
dc_clk_mgr_create accidentally overwrites the dce60_clk_mgr with the dce_clk_mgr, causing incorrect behaviour on DCE6. Fix it by removing the extra dce_clk_mgr_construct. Fixes: 62eab49faae7 ("drm/amd/display: hide VGH asic specific structs") Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit bbddcbe36a686af03e91341b9bbfcca94bd45fb6) Cc: stable@vger.kernel.org
2025-08-04drm/amdkfd: Fix checkpoint-restore on multi-xccDavid Yat Sin3-16/+67
GPUs with multi-xcc have multiple MQDs per queue. This patch saves and restores all the MQDs within the partition. Signed-off-by: David Yat Sin <David.YatSin@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit a578f2a58c3ab38f0643b1b6e7534af860233cb1) Cc: stable@vger.kernel.org
2025-08-04drm/amd: Restore cached manual clock settings during resumeMario Limonciello1-0/+10
If the SCLK limits have been set before S3 they will not be restored. The limits are however cached in the driver and so they can be restored by running a commit sequence during resume. Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250725031222.3015095-3-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 4e9526924d09057a9ba854305e17eded900ced82) Cc: stable@vger.kernel.org
2025-08-04drm/amd: Restore cached power limit during resumeMario Limonciello1-0/+6
The power limit will be cached in smu->current_power_limit but if the ASIC goes into S3 this value won't be restored. Restore the value during SMU resume. Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250725031222.3015095-2-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 26a609e053a6fc494403e95403bc6a2470383bec) Cc: stable@vger.kernel.org
2025-08-04drm/amdgpu: Update external revid for GC v9.5.0Lijo Lazar1-0/+2
Use different external revid for GC v9.5.0 SOCs. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 21c6764ed4bfaecad034bc4fd15dd64c5a436325) Cc: stable@vger.kernel.org
generated by cgit v1.2.3 (git 2.39.1) at 2026-01-07 05:04:17 +0000