summaryrefslogtreecommitdiffstats
path: root/tools/testing/selftests/net/forwarding/devlink_lib.sh
AgeCommit message (Collapse)AuthorLines
2020-07-15selftests: mlxsw: Test policers' occupancyIdo Schimmel-0/+5
Test that policers shared by different tc filters are correctly reference counted by observing policers' occupancy via devlink-resource. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-06-01selftests: mlxsw: Add test for control packetsIdo Schimmel-0/+23
Generate packets matching the various control traps and check that the traps' stats increase accordingly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-16selftests: mlxsw: Do not hard code trap group nameIdo Schimmel-2/+6
It can be derived dynamically from the trap's name, so drop it. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-16selftests: devlink_lib: Remove double blank lineIdo Schimmel-1/+0
One blank line is enough. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30selftests: mlxsw: Add test cases for devlink-trap policersIdo Schimmel-0/+6
Add test cases that verify that each registered packet trap policer: * Honors that imposed limitations of rate and burst size * Able to police trapped packets to the specified rate * Able to police trapped packets to the specified burst size * Able to be unbound from its trap group Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30selftests: netdevsim: Add test cases for devlink-trap policersIdo Schimmel-0/+37
Add test cases for packet trap policer set / show commands as well as for the binding of these policers to packet trap groups. Both good and bad flows are tested for maximum coverage. v2: * Add test case with new 'fail_trap_policer_set' knob * Add test case for partially modified trap group Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27selftests: devlink_lib: Add devlink port helpersShalom Toledo-0/+16
Add two devlink port helpers: * devlink port get by netdev * devlink cpu port get Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27selftests: devlink_lib: Check devlink info command is supportedShalom Toledo-0/+6
Sanity check for devlink info command. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24selftests: pass pref and handle to devlink_trap_drop_* helpersJiri Pirko-2/+5
Currently the helpers assume pref 1 and handle 101. Make that explicit and pass the values from callers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07selftests: forwarding: devlink: Add functionality for trap exceptions testAmit Cohen-0/+12
Add common part of all the tests - check devlink status to ensure that packets were trapped. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07selftests: devlink: Make devlink_trap_cleanup() more genericAmit Cohen-1/+2
Add proto parameter in order to enable the use of devlink_trap_cleanup() in tests that use IPv6 protocol. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07selftests: devlink: Export functions to devlink libraryAmit Cohen-0/+42
l2_drops_test() is used to check that drop traps are functioning as intended. Currently it is only used in the layer 2 test, but it is also useful for the layer 3 test introduced in the subsequent patch. l2_drops_cleanup() is used to clean configurations and kill mausezahn proccess. Export the functions to the common devlink library to allow it to be re-used by future tests. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17selftests: forwarding: devlink_lib: Add devlink-trap helpersIdo Schimmel-0/+163
Add helpers to interact with devlink-trap, such as setting the action of a trap and retrieving statistics. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17selftests: forwarding: devlink_lib: Allow tests to define devlink deviceIdo Schimmel-12/+14
For tests that create their network interfaces dynamically or do not use interfaces at all (as with netdevsim) it is useful to define their own devlink device instead of deriving it from the first network interface. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28selftests: forwarding: devlink_lib: Add shared buffer helpersPetr Machata-0/+95
Add helpers to obtain, set, and restore a pool size, and a port-pool and tc-pool threshold. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28selftests: forwarding: devlink_lib: Simplify deduction of DEVLINK_DEVPetr Machata-3/+2
Use devlink -j and jq for more accurate querying. Use cut -f-2 instead of rev-cut-rev combo. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28selftests: forwarding: devlink_lib: Avoid double sourcing of lib.shPetr Machata-10/+0
Don't source lib.sh twice and make the script work with ifnames passed on the command line. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28selftests: net: forwarding: change devlink resource support checkingJiri Pirko-1/+1
As for the others, check help message output to find out if devlink supports "resource" object. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30selftests: forwarding: Add devlink_lib.shPetr Machata-0/+108
This helper library contains wrappers to devlink functionality agnostic to the underlying device. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> [petrm@mellanox.com: Split this out from another patch.] Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.46.0) at 2026-07-15 22:08:39 +0000