From 0d5e5e8a0aa49ea2163abf128da3b509a6c58286 Mon Sep 17 00:00:00 2001 From: Yihan Zhu Date: Sat, 7 Sep 2024 13:25:19 -0400 Subject: drm/amd/display: update DML2 policy EnhancedPrefetchScheduleAccelerationFinal DCN35 [WHY & HOW] Mismatch in DCN35 DML2 cause bw validation failed to acquire unexpected DPP pipe to cause grey screen and system hang. Remove EnhancedPrefetchScheduleAccelerationFinal value override to match HW spec. Cc: Mario Limonciello Cc: Alex Deucher Reviewed-by: Charlene Liu Signed-off-by: Yihan Zhu Signed-off-by: Aurabindo Pillai Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 9dad21f910fcea2bdcff4af46159101d7f9cd8ba) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/dml2/dml2_policy.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/dml2/dml2_policy.c b/drivers/gpu/drm/amd/display/dc/dml2/dml2_policy.c index c4c52173ef22..11c904ae2958 100644 --- a/drivers/gpu/drm/amd/display/dc/dml2/dml2_policy.c +++ b/drivers/gpu/drm/amd/display/dc/dml2/dml2_policy.c @@ -303,7 +303,6 @@ void build_unoptimized_policy_settings(enum dml_project_id project, struct dml_m if (project == dml_project_dcn35 || project == dml_project_dcn351) { policy->DCCProgrammingAssumesScanDirectionUnknownFinal = false; - policy->EnhancedPrefetchScheduleAccelerationFinal = 0; policy->AllowForPStateChangeOrStutterInVBlankFinal = dml_prefetch_support_uclk_fclk_and_stutter_if_possible; /*new*/ policy->UseOnlyMaxPrefetchModes = 1; } -- cgit v1.2.3 From d51160ab00969ee6758ed2dcbc0f81dd476a181c Mon Sep 17 00:00:00 2001 From: Fangzhi Zuo Date: Wed, 4 Sep 2024 15:29:24 -0400 Subject: drm/amd/display: Restore Optimized pbn Value if Failed to Disable DSC Existing last step of dsc policy is to restore pbn value under minimum compression when try to greedily disable dsc for a stream failed to fit in MST bw. Optimized dsc params result from optimization step is not necessarily the minimum compression, therefore it is not correct to restore the pbn under minimum compression rate. Restore the pbn under minimum compression instead of the value from optimized pbn could result in the dsc params not correct at the modeset where atomic_check failed due to not enough bw. One or more monitors connected could not light up in such case. Restore the optimized pbn value, instead of using the pbn value under minimum compression. Cc: Mario Limonciello Cc: Alex Deucher Reviewed-by: Wayne Lin Signed-off-by: Fangzhi Zuo Signed-off-by: Aurabindo Pillai Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 352c3165d2b75030169e012461a16bcf97f392fc) Cc: stable@vger.kernel.org --- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c index 83a31b97e96b..a08e8a0b696c 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c @@ -1027,6 +1027,7 @@ static int try_disable_dsc(struct drm_atomic_state *state, int remaining_to_try = 0; int ret; uint16_t fec_overhead_multiplier_x1000 = get_fec_overhead_multiplier(dc_link); + int var_pbn; for (i = 0; i < count; i++) { if (vars[i + k].dsc_enabled @@ -1057,13 +1058,18 @@ static int try_disable_dsc(struct drm_atomic_state *state, break; DRM_DEBUG_DRIVER("MST_DSC index #%d, try no compression\n", next_index); + var_pbn = vars[next_index].pbn; vars[next_index].pbn = kbps_to_peak_pbn(params[next_index].bw_range.stream_kbps, fec_overhead_multiplier_x1000); ret = drm_dp_atomic_find_time_slots(state, params[next_index].port->mgr, params[next_index].port, vars[next_index].pbn); - if (ret < 0) + if (ret < 0) { + DRM_DEBUG_DRIVER("%s:%d MST_DSC index #%d, failed to set pbn to the state, %d\n", + __func__, __LINE__, next_index, ret); + vars[next_index].pbn = var_pbn; return ret; + } ret = drm_dp_mst_atomic_check(state); if (ret == 0) { @@ -1071,14 +1077,17 @@ static int try_disable_dsc(struct drm_atomic_state *state, vars[next_index].dsc_enabled = false; vars[next_index].bpp_x16 = 0; } else { - DRM_DEBUG_DRIVER("MST_DSC index #%d, restore minimum compression\n", next_index); - vars[next_index].pbn = kbps_to_peak_pbn(params[next_index].bw_range.max_kbps, fec_overhead_multiplier_x1000); + DRM_DEBUG_DRIVER("MST_DSC index #%d, restore optimized pbn value\n", next_index); + vars[next_index].pbn = var_pbn; ret = drm_dp_atomic_find_time_slots(state, params[next_index].port->mgr, params[next_index].port, vars[next_index].pbn); - if (ret < 0) + if (ret < 0) { + DRM_DEBUG_DRIVER("%s:%d MST_DSC index #%d, failed to set pbn to the state, %d\n", + __func__, __LINE__, next_index, ret); return ret; + } } tried[next_index] = true; -- cgit v1.2.3 From c36df0f5f5e5acec5d78f23c4725cc500df28843 Mon Sep 17 00:00:00 2001 From: Charlene Liu Date: Wed, 11 Sep 2024 19:45:09 -0400 Subject: drm/amd/display: avoid set dispclk to 0 [why] set dispclk to 0 cause stability issue. Cc: Mario Limonciello Cc: Alex Deucher Reviewed-by: Nicholas Kazlauskas Signed-off-by: Charlene Liu Signed-off-by: Aurabindo Pillai Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 1c6b16ebf5eb2bc5740be9e37b3a69f1dfe1dded) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/resource/dcn351/dcn351_resource.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/resource/dcn351/dcn351_resource.c b/drivers/gpu/drm/amd/display/dc/resource/dcn351/dcn351_resource.c index da9101b83e8c..70abd32ce2ad 100644 --- a/drivers/gpu/drm/amd/display/dc/resource/dcn351/dcn351_resource.c +++ b/drivers/gpu/drm/amd/display/dc/resource/dcn351/dcn351_resource.c @@ -766,6 +766,7 @@ static const struct dc_debug_options debug_defaults_drv = { .disable_dmub_reallow_idle = false, .static_screen_wait_frames = 2, .notify_dpia_hr_bw = true, + .min_disp_clk_khz = 50000, }; static const struct dc_panel_config panel_config_defaults = { -- cgit v1.2.3 From 05af800704ee7187d9edd461ec90f3679b1c4aba Mon Sep 17 00:00:00 2001 From: Alex Hung Date: Fri, 6 Sep 2024 11:39:18 -0600 Subject: drm/amd/display: Add HDR workaround for specific eDP [WHY & HOW] Some eDP panels suffer from flicking when HDR is enabled in KDE. This quirk works around it by skipping VSC that is incompatible with eDP panels. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3151 Cc: Mario Limonciello Cc: Alex Deucher Reviewed-by: Rodrigo Siqueira Signed-off-by: Alex Hung Signed-off-by: Aurabindo Pillai Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 4d4257280d7957727998ef90ccc7b69c7cca8376) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 11 ++++++++++- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 4 ++++ drivers/gpu/drm/amd/display/dc/dc_types.h | 1 + 3 files changed, 15 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 6e79028c5d78..7a826f20c38a 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -6735,12 +6735,21 @@ create_stream_for_sink(struct drm_connector *connector, if (stream->signal == SIGNAL_TYPE_DISPLAY_PORT || stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST || stream->signal == SIGNAL_TYPE_EDP) { + const struct dc_edid_caps *edid_caps; + unsigned int disable_colorimetry = 0; + + if (aconnector->dc_sink) { + edid_caps = &aconnector->dc_sink->edid_caps; + disable_colorimetry = edid_caps->panel_patch.disable_colorimetry; + } + // // should decide stream support vsc sdp colorimetry capability // before building vsc info packet // stream->use_vsc_sdp_for_colorimetry = stream->link->dpcd_caps.dpcd_rev.raw >= 0x14 && - stream->link->dpcd_caps.dprx_feature.bits.VSC_SDP_COLORIMETRY_SUPPORTED; + stream->link->dpcd_caps.dprx_feature.bits.VSC_SDP_COLORIMETRY_SUPPORTED && + !disable_colorimetry; if (stream->out_transfer_func.tf == TRANSFER_FUNCTION_GAMMA22) tf = TRANSFER_FUNC_GAMMA_22; diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c index 50109d13d967..069e0195e50a 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c @@ -73,6 +73,10 @@ static void apply_edid_quirks(struct edid *edid, struct dc_edid_caps *edid_caps) DRM_DEBUG_DRIVER("Clearing DPCD 0x317 on monitor with panel id %X\n", panel_id); edid_caps->panel_patch.remove_sink_ext_caps = true; break; + case drm_edid_encode_panel_id('S', 'D', 'C', 0x4154): + DRM_DEBUG_DRIVER("Disabling VSC on monitor with panel id %X\n", panel_id); + edid_caps->panel_patch.disable_colorimetry = true; + break; default: return; } diff --git a/drivers/gpu/drm/amd/display/dc/dc_types.h b/drivers/gpu/drm/amd/display/dc/dc_types.h index fd6dca735714..6d7989b751e2 100644 --- a/drivers/gpu/drm/amd/display/dc/dc_types.h +++ b/drivers/gpu/drm/amd/display/dc/dc_types.h @@ -178,6 +178,7 @@ struct dc_panel_patch { unsigned int skip_avmute; unsigned int mst_start_top_delay; unsigned int remove_sink_ext_caps; + unsigned int disable_colorimetry; }; struct dc_edid_caps { -- cgit v1.2.3 From ef785ca7f7c80891580cafd36c8dd86375684310 Mon Sep 17 00:00:00 2001 From: Leo Li Date: Wed, 11 Sep 2024 17:27:08 -0400 Subject: drm/amd/display: Enable idle workqueue for more IPS modes [Why] There are more IPS modes other than DMUB_IPS_ENABLE that enables IPS. We need to enable the hotplug detect idle workqueue for those modes as well. [How] Modify the if condition to initialize the workqueue in all IPS modes except for DMUB_IPS_DISABLE_ALL. Fixes: 65444581a4ae ("drm/amd/display: Determine IPS mode by ASIC and PMFW versions") Signed-off-by: Leo Li Reviewed-by: Roman Li Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 181db30bcfed097ecc680539b1eabe935c11f57f) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 7a826f20c38a..5109146ef2ba 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -2026,7 +2026,8 @@ static int amdgpu_dm_init(struct amdgpu_device *adev) DRM_ERROR("amdgpu: failed to initialize vblank_workqueue.\n"); } - if (adev->dm.dc->caps.ips_support && adev->dm.dc->config.disable_ips == DMUB_IPS_ENABLE) + if (adev->dm.dc->caps.ips_support && + adev->dm.dc->config.disable_ips != DMUB_IPS_DISABLE_ALL) adev->dm.idle_workqueue = idle_create_workqueue(adev); if (adev->dm.dc->caps.max_links > 0 && adev->family >= AMDGPU_FAMILY_RV) { -- cgit v1.2.3 From 52d4e3fb3d340447dcdac0e14ff21a764f326907 Mon Sep 17 00:00:00 2001 From: Tom Chung Date: Fri, 13 Sep 2024 15:44:40 +0800 Subject: drm/amd/display: Fix system hang while resume with TBT monitor [Why] Connected with a Thunderbolt monitor and do the suspend and the system may hang while resume. The TBT monitor HPD will be triggered during the resume procedure and call the drm_client_modeset_probe() while struct drm_connector connector->dev->master is NULL. It will mess up the pipe topology after resume. [How] Skip the TBT monitor HPD during the resume procedure because we currently will probe the connectors after resume by default. Reviewed-by: Wayne Lin Signed-off-by: Tom Chung Signed-off-by: Fangzhi Zuo Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 453f86a26945207a16b8f66aaed5962dc2b95b85) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 5109146ef2ba..60c617fcc97e 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -770,6 +770,12 @@ static void dmub_hpd_callback(struct amdgpu_device *adev, return; } + /* Skip DMUB HPD IRQ in suspend/resume. We will probe them later. */ + if (notify->type == DMUB_NOTIFICATION_HPD && adev->in_suspend) { + DRM_INFO("Skip DMUB HPD IRQ callback in suspend/resume\n"); + return; + } + link_index = notify->link_index; link = adev->dm.dc->links[link_index]; dev = adev->dm.ddev; -- cgit v1.2.3 From 0a9906cc45d21e21ca8bb2b98b79fd7c05420fda Mon Sep 17 00:00:00 2001 From: Josip Pavic Date: Tue, 24 Sep 2024 17:25:54 -0400 Subject: drm/amd/display: Clear update flags after update has been applied [Why] Since the surface/stream update flags aren't cleared after applying updates, those same updates may be applied again in a future call to update surfaces/streams for surfaces/streams that aren't actually part of that update (i.e. applying an update for one surface/stream can trigger unintended programming on a different surface/stream). For example, when an update results in a call to program_front_end_for_ctx, that function may call program_pipe on all pipes. If there are surface update flags that were never cleared on the surface some pipe is attached to, then the same update will be programmed again. [How] Clear the surface and stream update flags after applying the updates. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3441 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3616 Cc: Melissa Wen Reviewed-by: Aric Cyr Signed-off-by: Josip Pavic Signed-off-by: Rodrigo Siqueira Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 7671f62c10f2a4c77d89b39fd50fab7f918d6809) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/core/dc.c | 45 ++++++++++++++++++++++++-------- 1 file changed, 34 insertions(+), 11 deletions(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c index 5c39390ecbd5..a88f1b6ea64c 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc.c @@ -5065,11 +5065,26 @@ static bool update_planes_and_stream_v3(struct dc *dc, return true; } +static void clear_update_flags(struct dc_surface_update *srf_updates, + int surface_count, struct dc_stream_state *stream) +{ + int i; + + if (stream) + stream->update_flags.raw = 0; + + for (i = 0; i < surface_count; i++) + if (srf_updates[i].surface) + srf_updates[i].surface->update_flags.raw = 0; +} + bool dc_update_planes_and_stream(struct dc *dc, struct dc_surface_update *srf_updates, int surface_count, struct dc_stream_state *stream, struct dc_stream_update *stream_update) { + bool ret = false; + dc_exit_ips_for_hw_access(dc); /* * update planes and stream version 3 separates FULL and FAST updates @@ -5086,10 +5101,16 @@ bool dc_update_planes_and_stream(struct dc *dc, * features as they are now transparent to the new sequence. */ if (dc->ctx->dce_version >= DCN_VERSION_4_01) - return update_planes_and_stream_v3(dc, srf_updates, + ret = update_planes_and_stream_v3(dc, srf_updates, surface_count, stream, stream_update); - return update_planes_and_stream_v2(dc, srf_updates, + else + ret = update_planes_and_stream_v2(dc, srf_updates, surface_count, stream, stream_update); + + if (ret) + clear_update_flags(srf_updates, surface_count, stream); + + return ret; } void dc_commit_updates_for_stream(struct dc *dc, @@ -5099,6 +5120,8 @@ void dc_commit_updates_for_stream(struct dc *dc, struct dc_stream_update *stream_update, struct dc_state *state) { + bool ret = false; + dc_exit_ips_for_hw_access(dc); /* TODO: Since change commit sequence can have a huge impact, * we decided to only enable it for DCN3x. However, as soon as @@ -5106,17 +5129,17 @@ void dc_commit_updates_for_stream(struct dc *dc, * the new sequence for all ASICs. */ if (dc->ctx->dce_version >= DCN_VERSION_4_01) { - update_planes_and_stream_v3(dc, srf_updates, surface_count, + ret = update_planes_and_stream_v3(dc, srf_updates, surface_count, stream, stream_update); - return; - } - if (dc->ctx->dce_version >= DCN_VERSION_3_2) { - update_planes_and_stream_v2(dc, srf_updates, surface_count, + } else if (dc->ctx->dce_version >= DCN_VERSION_3_2) { + ret = update_planes_and_stream_v2(dc, srf_updates, surface_count, stream, stream_update); - return; - } - update_planes_and_stream_v1(dc, srf_updates, surface_count, stream, - stream_update, state); + } else + ret = update_planes_and_stream_v1(dc, srf_updates, surface_count, stream, + stream_update, state); + + if (ret) + clear_update_flags(srf_updates, surface_count, stream); } uint8_t dc_get_current_stream_count(struct dc *dc) -- cgit v1.2.3 From 79bc412ef787cf25773d0ece93f8739ce0e6ac1e Mon Sep 17 00:00:00 2001 From: Hamza Mahfooz Date: Fri, 4 Oct 2024 15:22:57 -0400 Subject: drm/amd/display: fix hibernate entry for DCN35+ Since, two suspend-resume cycles are required to enter hibernate and, since we only need to enable idle optimizations in the first cycle (which is pretty much equivalent to s2idle). We can check in_s0ix, to prevent the system from entering idle optimizations before it actually enters hibernate (from display's perspective). Also, call dc_set_power_state() before dc_allow_idle_optimizations(), since it's safer to do so because dc_set_power_state() writes to DMUB. Acked-by: Alex Deucher Signed-off-by: Hamza Mahfooz Signed-off-by: Alex Deucher (cherry picked from commit 2fe79508d9c393bb9931b0037c5ecaee09a8dc39) Cc: stable@vger.kernel.org # 6.10+ --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 60c617fcc97e..6b5e2206e687 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -2972,10 +2972,11 @@ static int dm_suspend(void *handle) hpd_rx_irq_work_suspend(dm); - if (adev->dm.dc->caps.ips_support) - dc_allow_idle_optimizations(adev->dm.dc, true); - dc_set_power_state(dm->dc, DC_ACPI_CM_POWER_STATE_D3); + + if (dm->dc->caps.ips_support && adev->in_s0ix) + dc_allow_idle_optimizations(dm->dc, true); + dc_dmub_srv_set_power_state(dm->dc->ctx->dmub_srv, DC_ACPI_CM_POWER_STATE_D3); return 0; -- cgit v1.2.3