From f09cbb6c94e47b4be985bfd3c8cf453818f5ef9d Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Fri, 24 Nov 2023 16:03:43 +0100 Subject: i40e: Remove VEB recursion The VEB (virtual embedded switch) as a switch element can be connected according datasheet though its uplink to: - Physical port - Port Virtualizer (not used directly by i40e driver but can be present in MFP mode where the physical port is shared between PFs) - No uplink (aka floating VEB) But VEB uplink cannot be connected to another VEB and any attempt to do so results in: "i40e 0000:02:00.0: couldn't add VEB, err -EIO aq_err I40E_AQ_RC_ENOENT" that indicates "the uplink SEID does not point to valid element". Remove this logic from the driver code this way: 1) For debugfs only allow to build floating VEB (uplink_seid == 0) or main VEB (uplink_seid == mac_seid) 2) Do not recurse in i40e_veb_link_event() as no VEB cannot have sub-VEBs 3) Ditto for i40e_veb_rebuild() + simplify the function as we know that the VEB for rebuild can be only the main LAN VEB or some of the floating VEBs 4) In i40e_rebuild() there is no need to check veb->uplink_seid as the possible ones are 0 and MAC SEID 5) In i40e_vsi_release() do not take into account VEBs whose uplink is another VEB as this is not possible 6) Remove veb_idx field from i40e_veb as a VEB cannot have sub-VEBs Tested using i40e debugfs interface: 1) Initial state [root@cnb-03 net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command" [root@cnb-03 net-next]# echo dump switch > $CMD [root@cnb-03 net-next]# dmesg -c [ 98.440641] i40e 0000:02:00.0: header: 3 reported 3 total [ 98.446053] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 98.452593] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 98.458856] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 2) Add floating VEB [root@cnb-03 net-next]# echo add relay > $CMD [root@cnb-03 net-next]# dmesg -c [ 122.745630] i40e 0000:02:00.0: added relay 162 [root@cnb-03 net-next]# echo dump switch > $CMD [root@cnb-03 net-next]# dmesg -c [ 136.650049] i40e 0000:02:00.0: header: 4 reported 4 total [ 136.655466] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 136.661994] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 136.668264] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 [ 136.674787] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 3) Add VMDQ2 VSI to this new VEB [root@cnb-03 net-next]# dmesg -c [ 168.351763] i40e 0000:02:00.0: added VSI 394 to relay 162 [ 168.374652] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None [root@cnb-03 net-next]# echo dump switch > $CMD [root@cnb-03 net-next]# dmesg -c [ 195.683204] i40e 0000:02:00.0: header: 5 reported 5 total [ 195.688611] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16 [ 195.695143] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 [ 195.701410] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 195.707935] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 195.714201] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 4) Try to delete the VEB [root@cnb-03 net-next]# echo del relay 162 > $CMD [root@cnb-03 net-next]# dmesg -c [ 239.260901] i40e 0000:02:00.0: deleting relay 162 [ 239.265621] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left 5) Do PF reset and check switch status after rebuild [root@cnb-03 net-next]# echo pfr > $CMD [root@cnb-03 net-next]# echo dump switch > $CMD [root@cnb-03 net-next]# dmesg -c ... [ 272.333655] i40e 0000:02:00.0: header: 5 reported 5 total [ 272.339066] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16 [ 272.345599] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 [ 272.351862] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 272.358387] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 272.364654] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 6) Delete VSI and delete VEB [ 297.199116] i40e 0000:02:00.0: deleting VSI 394 [ 299.807580] i40e 0000:02:00.0: deleting relay 162 [ 309.767905] i40e 0000:02:00.0: header: 3 reported 3 total [ 309.773318] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 309.779845] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 309.786111] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 Reviewed-by: Wojciech Drewek Signed-off-by: Ivan Vecera Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Reviewed-by: Simon Horman Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e_debugfs.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers/net/ethernet/intel/i40e/i40e_debugfs.c') diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c index 921a97d5479e..f9ba45f596c9 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c +++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c @@ -683,9 +683,8 @@ static void i40e_dbg_dump_veb_seid(struct i40e_pf *pf, int seid) return; } dev_info(&pf->pdev->dev, - "veb idx=%d,%d stats_ic=%d seid=%d uplink=%d mode=%s\n", - veb->idx, veb->veb_idx, veb->stats_idx, veb->seid, - veb->uplink_seid, + "veb idx=%d stats_ic=%d seid=%d uplink=%d mode=%s\n", + veb->idx, veb->stats_idx, veb->seid, veb->uplink_seid, veb->bridge_mode == BRIDGE_MODE_VEPA ? "VEPA" : "VEB"); i40e_dbg_dump_eth_stats(pf, &veb->stats); } @@ -848,8 +847,7 @@ static ssize_t i40e_dbg_command_write(struct file *filp, goto command_write_done; } - veb = i40e_pf_get_veb_by_seid(pf, uplink_seid); - if (!veb && uplink_seid != 0 && uplink_seid != pf->mac_seid) { + if (uplink_seid != 0 && uplink_seid != pf->mac_seid) { dev_info(&pf->pdev->dev, "add relay: relay uplink %d not found\n", uplink_seid); -- cgit v1.2.3