From 65662a8dcdd01342b71ee44234bcfd0162e195af Mon Sep 17 00:00:00 2001 From: Arkadiusz Kubalewski Date: Thu, 29 Apr 2021 19:49:47 +0200 Subject: i40e: Fix logic of disabling queues Correct the message flow between driver and firmware when disabling queues. Previously in case of PF reset (due to required reinit after reconfig), the error like: "VSI seid 397 Tx ring 60 disable timeout" could show up occasionally. The error was not a real issue of hardware or firmware, it was caused by wrong sequence of messages invoked by the driver. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Aleksandr Loktionov Signed-off-by: Arkadiusz Kubalewski Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e_main.c | 58 +++++++++++++++++------------ 1 file changed, 34 insertions(+), 24 deletions(-) (limited to 'drivers/net/ethernet/intel/i40e/i40e_main.c') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 861e59a350bd..5297e6c59083 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -4454,11 +4454,10 @@ int i40e_control_wait_tx_q(int seid, struct i40e_pf *pf, int pf_q, } /** - * i40e_vsi_control_tx - Start or stop a VSI's rings + * i40e_vsi_enable_tx - Start a VSI's rings * @vsi: the VSI being configured - * @enable: start or stop the rings **/ -static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable) +static int i40e_vsi_enable_tx(struct i40e_vsi *vsi) { struct i40e_pf *pf = vsi->back; int i, pf_q, ret = 0; @@ -4467,7 +4466,7 @@ static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable) for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) { ret = i40e_control_wait_tx_q(vsi->seid, pf, pf_q, - false /*is xdp*/, enable); + false /*is xdp*/, true); if (ret) break; @@ -4476,7 +4475,7 @@ static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable) ret = i40e_control_wait_tx_q(vsi->seid, pf, pf_q + vsi->alloc_queue_pairs, - true /*is xdp*/, enable); + true /*is xdp*/, true); if (ret) break; } @@ -4574,32 +4573,25 @@ int i40e_control_wait_rx_q(struct i40e_pf *pf, int pf_q, bool enable) } /** - * i40e_vsi_control_rx - Start or stop a VSI's rings + * i40e_vsi_enable_rx - Start a VSI's rings * @vsi: the VSI being configured - * @enable: start or stop the rings **/ -static int i40e_vsi_control_rx(struct i40e_vsi *vsi, bool enable) +static int i40e_vsi_enable_rx(struct i40e_vsi *vsi) { struct i40e_pf *pf = vsi->back; int i, pf_q, ret = 0; pf_q = vsi->base_queue; for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) { - ret = i40e_control_wait_rx_q(pf, pf_q, enable); + ret = i40e_control_wait_rx_q(pf, pf_q, true); if (ret) { dev_info(&pf->pdev->dev, - "VSI seid %d Rx ring %d %sable timeout\n", - vsi->seid, pf_q, (enable ? "en" : "dis")); + "VSI seid %d Rx ring %d enable timeout\n", + vsi->seid, pf_q); break; } } - /* Due to HW errata, on Rx disable only, the register can indicate done - * before it really is. Needs 50ms to be sure - */ - if (!enable) - mdelay(50); - return ret; } @@ -4612,29 +4604,47 @@ int i40e_vsi_start_rings(struct i40e_vsi *vsi) int ret = 0; /* do rx first for enable and last for disable */ - ret = i40e_vsi_control_rx(vsi, true); + ret = i40e_vsi_enable_rx(vsi); if (ret) return ret; - ret = i40e_vsi_control_tx(vsi, true); + ret = i40e_vsi_enable_tx(vsi); return ret; } +#define I40E_DISABLE_TX_GAP_MSEC 50 + /** * i40e_vsi_stop_rings - Stop a VSI's rings * @vsi: the VSI being configured **/ void i40e_vsi_stop_rings(struct i40e_vsi *vsi) { + struct i40e_pf *pf = vsi->back; + int pf_q, err, q_end; + /* When port TX is suspended, don't wait */ if (test_bit(__I40E_PORT_SUSPENDED, vsi->back->state)) return i40e_vsi_stop_rings_no_wait(vsi); - /* do rx first for enable and last for disable - * Ignore return value, we need to shutdown whatever we can - */ - i40e_vsi_control_tx(vsi, false); - i40e_vsi_control_rx(vsi, false); + q_end = vsi->base_queue + vsi->num_queue_pairs; + for (pf_q = vsi->base_queue; pf_q < q_end; pf_q++) + i40e_pre_tx_queue_cfg(&pf->hw, (u32)pf_q, false); + + for (pf_q = vsi->base_queue; pf_q < q_end; pf_q++) { + err = i40e_control_wait_rx_q(pf, pf_q, false); + if (err) + dev_info(&pf->pdev->dev, + "VSI seid %d Rx ring %d dissable timeout\n", + vsi->seid, pf_q); + } + + msleep(I40E_DISABLE_TX_GAP_MSEC); + pf_q = vsi->base_queue; + for (pf_q = vsi->base_queue; pf_q < q_end; pf_q++) + wr32(&pf->hw, I40E_QTX_ENA(pf_q), 0); + + i40e_vsi_wait_queues_disabled(vsi); } /** -- cgit v1.2.3 From 89ec1f0886c127c7e41ac61a6b6d539f4fb2510b Mon Sep 17 00:00:00 2001 From: Jedrzej Jagielski Date: Wed, 2 Jun 2021 00:47:03 +0000 Subject: i40e: Fix queue-to-TC mapping on Tx In SW DCB mode the packets sent receive incorrect UP tags. They are constructed correctly and put into tx_ring, but UP is later remapped by HW on the basis of TCTUPR register contents according to Tx queue selected, and BW used is consistent with the new UP values. This is caused by Tx queue selection in kernel not taking into account DCB configuration. This patch fixes the issue by implementing the ndo_select_queue NDO callback. Fixes: fd0a05ce74ef ("i40e: transmit, receive, and NAPI") Signed-off-by: Arkadiusz Kubalewski Signed-off-by: Jedrzej Jagielski Tested-by: Imam Hassan Reza Biswas Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e_main.c | 1 + drivers/net/ethernet/intel/i40e/i40e_txrx.c | 50 +++++++++++++++++++++++++++++ drivers/net/ethernet/intel/i40e/i40e_txrx.h | 2 ++ 3 files changed, 53 insertions(+) (limited to 'drivers/net/ethernet/intel/i40e/i40e_main.c') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 5297e6c59083..278077208f37 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -13271,6 +13271,7 @@ static const struct net_device_ops i40e_netdev_ops = { .ndo_poll_controller = i40e_netpoll, #endif .ndo_setup_tc = __i40e_setup_tc, + .ndo_select_queue = i40e_lan_select_queue, .ndo_set_features = i40e_set_features, .ndo_set_vf_mac = i40e_ndo_set_vf_mac, .ndo_set_vf_vlan = i40e_ndo_set_vf_port_vlan, diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 38eb8151ee9a..3f25bd8c4924 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -3631,6 +3631,56 @@ dma_error: return -1; } +static u16 i40e_swdcb_skb_tx_hash(struct net_device *dev, + const struct sk_buff *skb, + u16 num_tx_queues) +{ + u32 jhash_initval_salt = 0xd631614b; + u32 hash; + + if (skb->sk && skb->sk->sk_hash) + hash = skb->sk->sk_hash; + else + hash = (__force u16)skb->protocol ^ skb->hash; + + hash = jhash_1word(hash, jhash_initval_salt); + + return (u16)(((u64)hash * num_tx_queues) >> 32); +} + +u16 i40e_lan_select_queue(struct net_device *netdev, + struct sk_buff *skb, + struct net_device __always_unused *sb_dev) +{ + struct i40e_netdev_priv *np = netdev_priv(netdev); + struct i40e_vsi *vsi = np->vsi; + struct i40e_hw *hw; + u16 qoffset; + u16 qcount; + u8 tclass; + u16 hash; + u8 prio; + + /* is DCB enabled at all? */ + if (vsi->tc_config.numtc == 1) + return i40e_swdcb_skb_tx_hash(netdev, skb, + netdev->real_num_tx_queues); + + prio = skb->priority; + hw = &vsi->back->hw; + tclass = hw->local_dcbx_config.etscfg.prioritytable[prio]; + /* sanity check */ + if (unlikely(!(vsi->tc_config.enabled_tc & BIT(tclass)))) + tclass = 0; + + /* select a queue assigned for the given TC */ + qcount = vsi->tc_config.tc_info[tclass].qcount; + hash = i40e_swdcb_skb_tx_hash(netdev, skb, qcount); + + qoffset = vsi->tc_config.tc_info[tclass].qoffset; + return qoffset + hash; +} + /** * i40e_xmit_xdp_ring - transmits an XDP buffer to an XDP Tx ring * @xdpf: data to transmit diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h index 86fed05b4f19..bfc2845c99d1 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h @@ -451,6 +451,8 @@ static inline unsigned int i40e_rx_pg_order(struct i40e_ring *ring) bool i40e_alloc_rx_buffers(struct i40e_ring *rxr, u16 cleaned_count); netdev_tx_t i40e_lan_xmit_frame(struct sk_buff *skb, struct net_device *netdev); +u16 i40e_lan_select_queue(struct net_device *netdev, struct sk_buff *skb, + struct net_device *sb_dev); void i40e_clean_tx_ring(struct i40e_ring *tx_ring); void i40e_clean_rx_ring(struct i40e_ring *rx_ring); int i40e_setup_tx_descriptors(struct i40e_ring *tx_ring); -- cgit v1.2.3 From ea52faae1d17cd3048681d86d2e8641f44de484d Mon Sep 17 00:00:00 2001 From: Jedrzej Jagielski Date: Fri, 18 Jun 2021 08:49:49 +0000 Subject: i40e: Fix log TC creation failure when max num of queues is exceeded Fix missing failed message if driver does not have enough queues to complete TC command. Without this fix no message is displayed in dmesg. Fixes: a9ce82f744dc ("i40e: Enable 'channel' mode in mqprio for TC configs") Signed-off-by: Grzegorz Szczurek Signed-off-by: Jedrzej Jagielski Tested-by: Imam Hassan Reza Biswas Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net/ethernet/intel/i40e/i40e_main.c') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 278077208f37..1d1f52756a93 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -7290,6 +7290,8 @@ static int i40e_validate_mqprio_qopt(struct i40e_vsi *vsi, } if (vsi->num_queue_pairs < (mqprio_qopt->qopt.offset[i] + mqprio_qopt->qopt.count[i])) { + dev_err(&vsi->back->pdev->dev, + "Failed to create traffic channel, insufficient number of queues.\n"); return -EINVAL; } if (sum_max_rate > i40e_get_link_speed(vsi)) { -- cgit v1.2.3