From 25985edcedea6396277003854657b5f3cb31a628 Mon Sep 17 00:00:00 2001 From: Lucas De Marchi Date: Wed, 30 Mar 2011 22:57:33 -0300 Subject: Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi --- drivers/usb/host/xhci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/usb/host/xhci.c') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 9a3645fd759b..196e0181b2ed 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -741,7 +741,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) int retval; /* Wait a bit if either of the roothubs need to settle from the - * transistion into bus suspend. + * transition into bus suspend. */ if (time_before(jiffies, xhci->bus_state[0].next_statechange) || time_before(jiffies, @@ -2072,7 +2072,7 @@ int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, return -EINVAL; } vdev = xhci->devs[udev->slot_id]; - /* Mark each endpoint as being in transistion, so + /* Mark each endpoint as being in transition, so * xhci_urb_enqueue() will reject all URBs. */ for (i = 0; i < num_eps; i++) { -- cgit v1.2.3 From 2dea75d96ade3c7cd2bfe73f99c7b3291dc3d03a Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 12 Apr 2011 23:06:28 -0700 Subject: USB: xhci - also free streams when resetting devices Currently, when resetting a device, xHCI driver disables all but one endpoints and frees their rings, but leaves alone any streams that might have been allocated. Later, when users try to free allocated streams, we oops in xhci_setup_no_streams_ep_input_ctx() because ep->ring is NULL. Let's free not only rings but also stream data as well, so that calling free_streams() on a device that was reset will be safe. This should be queued for stable trees back to 2.6.35. Reviewed-by: Micah Elizabeth Scott Signed-off-by: Dmitry Torokhov Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers/usb/host/xhci.c') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 196e0181b2ed..48706c0d6577 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2386,10 +2386,18 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) /* Everything but endpoint 0 is disabled, so free or cache the rings. */ last_freed_endpoint = 1; for (i = 1; i < 31; ++i) { - if (!virt_dev->eps[i].ring) - continue; - xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); - last_freed_endpoint = i; + struct xhci_virt_ep *ep = &virt_dev->eps[i]; + + if (ep->ep_state & EP_HAS_STREAMS) { + xhci_free_stream_info(xhci, ep->stream_info); + ep->stream_info = NULL; + ep->ep_state &= ~EP_HAS_STREAMS; + } + + if (ep->ring) { + xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); + last_freed_endpoint = i; + } } xhci_dbg(xhci, "Output context after successful reset device cmd:\n"); xhci_dbg_ctx(xhci, virt_dev->out_ctx, last_freed_endpoint); -- cgit v1.2.3 From fedd383e33f9ba9b91626f72c593ea327403bf59 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 12 Apr 2011 17:43:19 -0700 Subject: xhci: Tell USB core both roothubs lost power. On a resume, when the power is lost during hibernate, the USB core will call hub_reset_resume for the xHCI USB 2.0 roothub, but not for the USB 3.0 roothub: [ 164.748310] usb usb1: root hub lost power or was reset [ 164.748353] usb usb2: root hub lost power or was reset [ 164.748487] usb usb3: root hub lost power or was reset [ 164.748488] xhci_hcd 0000:01:00.0: Stop HCD ... [ 164.870039] hub 4-0:1.0: hub_resume ... [ 164.870054] hub 3-0:1.0: hub_reset_resume This causes issues later, because the USB core assumes the USB 3.0 hub attached to the USB 3.0 roothub is still active. It attempts to queue a control URB for the external hub, which fails because all the device slot contexts were released when the USB 3.0 roothub lost power: [ 164.980044] hub 4-1:1.0: hub_resume [ 164.980047] xhci_hcd 0000:01:00.0: Get port status returned 0x10101 [ 164.980049] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980053] hub 3-0:1.0: port 1: status 0101 change 0001 [ 164.980056] hub 4-1:1.0: hub_port_status failed (err = -22) [ 164.980060] xhci_hcd 0000:01:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90008948440, 32'h202e1, 4'hf); [ 164.980062] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980066] xhci_hcd 0000:01:00.0: clear port connect change, actual port 0 status = 0x2e1 [ 164.980069] hub 4-1:1.0: hub_port_status failed (err = -22) [ 164.980072] xhci_hcd 0000:01:00.0: get port status, actual port 1 status = 0x2a0 [ 164.980074] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980077] xhci_hcd 0000:01:00.0: Get port status returned 0x100 [ 164.980079] hub 4-1:1.0: hub_port_status failed (err = -22) [ 164.980082] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980085] hub 4-1:1.0: hub_port_status failed (err = -22) [ 164.980088] hub 4-1:1.0: port 4: status 0000 change 0000 [ 164.980091] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980094] hub 4-1:1.0: activate --> -22 [ 164.980113] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980117] hub 4-1:1.0: hub_port_status failed (err = -22) [ 164.980119] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980123] hub 4-1:1.0: can't resume port 4, status -22 [ 164.980126] hub 4-1:1.0: port 4 status ffff.ffff after resume, -22 [ 164.980129] usb 4-1.4: can't resume, status -22 [ 164.980131] hub 4-1:1.0: logical disconnect on port 4 This causes issues when a USB 3.0 hard drive is attached to the external USB 3.0 hub when the system is hibernated: [ 6249.849653] sd 8:0:0:0: [sdb] Unhandled error code [ 6249.849659] sd 8:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 6249.849663] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 2a 08 00 00 02 00 [ 6249.849671] end_request: I/O error, dev sdb, sector 10760 Make sure to inform the USB core that *both* xHCI roothubs lost power. Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/usb/host/xhci.c') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 48706c0d6577..c41358e4b8cc 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -771,7 +771,9 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* If restore operation fails, re-initialize the HC during resume */ if ((temp & STS_SRE) || hibernated) { - usb_root_hub_lost_power(hcd->self.root_hub); + /* Let the USB core know _both_ roothubs lost power. */ + usb_root_hub_lost_power(xhci->main_hcd->self.root_hub); + usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub); xhci_dbg(xhci, "Stop HCD\n"); xhci_halt(xhci); -- cgit v1.2.3 From c41136b05d3fb213a192f76a5688ff83687c1136 Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Tue, 22 Mar 2011 17:08:14 +0800 Subject: xHCI: Implement AMD PLL quirk This patch disable the optional PM feature inside the Hudson3 platform under the following conditions: 1. If an isochronous device is connected to xHCI port and is active; 2. Optional PM feature that powers down the internal Bus PLL when the link is in low power state is enabled. The PM feature needs to be disabled to eliminate PLL startup delays when the link comes out of low power state. The performance of DMA data transfer could be impacted if system delay were encountered and in addition to the PLL start up delays. Disabling the PM would leave room for unpredictable system delays in order to guarantee uninterrupted data transfer to isochronous audio or video stream devices that require time sensitive information. If data in an audio/video stream was interrupted then erratic audio or video performance may be encountered. AMD PLL quirk is already implemented in OHCI/EHCI driver. After moving the quirk code to pci-quirks.c and export them, xHCI driver can call it directly without having the quirk implementation in itself. Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-pci.c | 4 ++++ drivers/usb/host/xhci-ring.c | 24 +++++++++++++++++++++++- drivers/usb/host/xhci.c | 3 +++ drivers/usb/host/xhci.h | 2 ++ 4 files changed, 32 insertions(+), 1 deletion(-) (limited to 'drivers/usb/host/xhci.c') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index ceea9f33491c..a10494c2f3c7 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -114,6 +114,10 @@ static int xhci_pci_setup(struct usb_hcd *hcd) if (pdev->vendor == PCI_VENDOR_ID_NEC) xhci->quirks |= XHCI_NEC_HOST; + /* AMD PLL quirk */ + if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info()) + xhci->quirks |= XHCI_AMD_PLL_FIX; + /* Make sure the HC is halted. */ retval = xhci_halt(xhci); if (retval) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index b0b4cc3b8584..7437386a9a50 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -619,6 +619,13 @@ static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci, /* Only giveback urb when this is the last td in urb */ if (urb_priv->td_cnt == urb_priv->length) { + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { + xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--; + if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) { + if (xhci->quirks & XHCI_AMD_PLL_FIX) + usb_amd_quirk_pll_enable(); + } + } usb_hcd_unlink_urb_from_ep(hcd, urb); xhci_dbg(xhci, "Giveback %s URB %p\n", adjective, urb); @@ -1565,8 +1572,17 @@ td_cleanup: urb_priv->td_cnt++; /* Giveback the urb when all the tds are completed */ - if (urb_priv->td_cnt == urb_priv->length) + if (urb_priv->td_cnt == urb_priv->length) { ret = 1; + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { + xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--; + if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs + == 0) { + if (xhci->quirks & XHCI_AMD_PLL_FIX) + usb_amd_quirk_pll_enable(); + } + } + } } return ret; @@ -3153,6 +3169,12 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, } } + if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) { + if (xhci->quirks & XHCI_AMD_PLL_FIX) + usb_amd_quirk_pll_disable(); + } + xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs++; + giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id, start_cycle, start_trb); return 0; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index c41358e4b8cc..81b976e45880 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -550,6 +550,9 @@ void xhci_stop(struct usb_hcd *hcd) del_timer_sync(&xhci->event_ring_timer); #endif + if (xhci->quirks & XHCI_AMD_PLL_FIX) + usb_amd_dev_put(); + xhci_dbg(xhci, "// Disabling event ring interrupts\n"); temp = xhci_readl(xhci, &xhci->op_regs->status); xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index bdb78f51735e..ba1be6b7cc6d 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -30,6 +30,7 @@ /* Code sharing between pci-quirks and xhci hcd */ #include "xhci-ext-caps.h" +#include "pci-quirks.h" /* xHCI PCI Configuration Registers */ #define XHCI_SBRN_OFFSET (0x60) @@ -1279,6 +1280,7 @@ struct xhci_hcd { #define XHCI_LINK_TRB_QUIRK (1 << 0) #define XHCI_RESET_EP_QUIRK (1 << 1) #define XHCI_NEC_HOST (1 << 2) +#define XHCI_AMD_PLL_FIX (1 << 3) /* There are two roothubs to keep track of bus suspend info for */ struct xhci_bus_state bus_state[2]; /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */ -- cgit v1.2.3