From f82d7d16aee5eb4c2315ba11a90f2f3c662d45b8 Mon Sep 17 00:00:00 2001 From: Mengdong Lin Date: Sat, 21 Sep 2013 20:34:45 -0400 Subject: ALSA : hda - not use assigned converters for all unused pins BIOS can mark a pin as "no physical connection" if the port is used by an integrated display which is not audio capable. And audio driver will overlook such pins. On Haswell, such a disconneted pin will keep muted and connected to the 1st converter by default. But if the 1st convertor is assigned to a connected pin for audio streaming. The muted disconnected pin can make the connected pin no sound output. So this patch avoids using assigned converters for all unused pins for Haswell, including the disconected pins. Signed-off-by: Mengdong Lin Reviewed-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_hdmi.c | 47 ++++++++++++++++++++++++++++------------------ 1 file changed, 29 insertions(+), 18 deletions(-) (limited to 'sound/pci/hda/patch_hdmi.c') diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 3d8cd04455a6..7ea0245fc6bd 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1149,32 +1149,43 @@ static int hdmi_choose_cvt(struct hda_codec *codec, } static void haswell_config_cvts(struct hda_codec *codec, - int pin_id, int mux_id) + hda_nid_t pin_nid, int mux_idx) { struct hdmi_spec *spec = codec->spec; - struct hdmi_spec_per_pin *per_pin; - int pin_idx, mux_idx; - int curr; - int err; + hda_nid_t nid, end_nid; + int cvt_idx, curr; + struct hdmi_spec_per_cvt *per_cvt; - for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) { - per_pin = get_pin(spec, pin_idx); + /* configure all pins, including "no physical connection" ones */ + end_nid = codec->start_nid + codec->num_nodes; + for (nid = codec->start_nid; nid < end_nid; nid++) { + unsigned int wid_caps = get_wcaps(codec, nid); + unsigned int wid_type = get_wcaps_type(wid_caps); - if (pin_idx == pin_id) + if (wid_type != AC_WID_PIN) continue; - curr = snd_hda_codec_read(codec, per_pin->pin_nid, 0, + if (nid == pin_nid) + continue; + + curr = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONNECT_SEL, 0); + if (curr != mux_idx) + continue; - /* Choose another unused converter */ - if (curr == mux_id) { - err = hdmi_choose_cvt(codec, pin_idx, NULL, &mux_idx); - if (err < 0) - return; - snd_printdd("HDMI: choose converter %d for pin %d\n", mux_idx, pin_idx); - snd_hda_codec_write_cache(codec, per_pin->pin_nid, 0, + /* choose an unassigned converter. The conveters in the + * connection list are in the same order as in the codec. + */ + for (cvt_idx = 0; cvt_idx < spec->num_cvts; cvt_idx++) { + per_cvt = get_cvt(spec, cvt_idx); + if (!per_cvt->assigned) { + snd_printdd("choose cvt %d for pin nid %d\n", + cvt_idx, nid); + snd_hda_codec_write_cache(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, - mux_idx); + cvt_idx); + break; + } } } } @@ -1216,7 +1227,7 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo, /* configure unused pins to choose other converters */ if (is_haswell(codec)) - haswell_config_cvts(codec, pin_idx, mux_idx); + haswell_config_cvts(codec, per_pin->pin_nid, mux_idx); snd_hda_spdif_ctls_assign(codec, pin_idx, per_cvt->cvt_nid); -- cgit v1.2.3 From 39edac70e9aedf451fccaa851b273ace9fcca0bd Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Mon, 7 Oct 2013 19:24:52 +0300 Subject: ALSA: hda - hdmi: Fix channel map switch not taking effect Currently hdmi_setup_audio_infoframe() reprograms the HDA channel mapping only when the infoframe is not up-to-date or the non-PCM flag has changed. However, when just the channel map has been changed, the infoframe may still be up-to-date and non-PCM flag may not have changed, so the new channel map is not actually programmed into the HDA codec. Notably, this failing case is also always triggered when the device is already in a prepared state and a new channel map is configured while changing only the channel positions (for example, plain "speaker-test -c2 -m FR,FL"). Fix that by always programming the channel map in hdmi_setup_audio_infoframe(). Tested on Intel HDMI. Signed-off-by: Anssi Hannula Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_hdmi.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) (limited to 'sound/pci/hda/patch_hdmi.c') diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 7ea0245fc6bd..50173d412ac5 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -936,6 +936,14 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, return; } + /* + * always configure channel mapping, it may have been changed by the + * user in the meantime + */ + hdmi_setup_channel_mapping(codec, pin_nid, non_pcm, ca, + channels, per_pin->chmap, + per_pin->chmap_set); + /* * sizeof(ai) is used instead of sizeof(*hdmi_ai) or * sizeof(*dp_ai) to avoid partial match/update problems when @@ -947,20 +955,10 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, "pin=%d channels=%d\n", pin_nid, channels); - hdmi_setup_channel_mapping(codec, pin_nid, non_pcm, ca, - channels, per_pin->chmap, - per_pin->chmap_set); hdmi_stop_infoframe_trans(codec, pin_nid); hdmi_fill_audio_infoframe(codec, pin_nid, ai.bytes, sizeof(ai)); hdmi_start_infoframe_trans(codec, pin_nid); - } else { - /* For non-pcm audio switch, setup new channel mapping - * accordingly */ - if (per_pin->non_pcm != non_pcm) - hdmi_setup_channel_mapping(codec, pin_nid, non_pcm, ca, - channels, per_pin->chmap, - per_pin->chmap_set); } per_pin->non_pcm = non_pcm; -- cgit v1.2.3