| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We traditionally used "int" to store and pass around the values defined
by "enum git_colorbool" (which were originally just #define macros).
Using an int doesn't produce incorrect results, but using the actual
enum makes the intent of the code more clear.
It would be nice if the compiler could catch cases where we used the
enum and an int interchangeably, since it's very easy to accidentally
check the boolean true/false of a colorbool like:
if (branch_use_color)
This is wrong because GIT_COLOR_UNKNOWN and GIT_COLOR_AUTO evaluate to
true in C, even though we may ultimately decide not to use color. But C
is pretty happy to convert between ints and enums (even with various
-Wenum-* warnings). So this sadly doesn't protect us from such mistakes,
but it hopefully does make the code easier to read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Long ago Git's decision to show color for a subsytem was stored in a
tri-state variable: it could be true (1), false (0), or unknown (-1).
But since daa0c3d971 (color: delay auto-color decision until point of
use, 2011-08-17) we want to carry around a new state, "auto", which
bases the decision on the tty-ness of stdout (rather than collapsing
that "auto" state to a true/false immediately).
That commit introduced a set of GIT_COLOR_* defines to represent each
state: UNKNOWN, ALWAYS, NEVER, and AUTO. But it only used the AUTO
value, and left alone code using bare 0/1/-1 values. And of course since
then we've grown many new spots that use those bare values.
Let's switch all of these to use the named constants. That should make
the code a bit easier to read, as it is more obvious that we're
representing a color decision.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_set_multivar()`.
All callsites are adjusted so that they use
`repo_config_set_multivar(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_set()`. All
callsites are adjusted so that they use `repo_config_set(the_repository,
...)` instead. While some callsites might already have a repository
available, this mechanical conversion is the exact same as the current
situation and thus cannot cause any regression. Those sites should
eventually be cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config()`. All callsites
are adjusted so that they use `repo_config(the_repository, ...)`
instead. While some callsites might already have a repository available,
this mechanical conversion is the exact same as the current situation
and thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git branch --sort=..." and "git for-each-ref --format=... --sort=..."
did not work as expected with some atoms, which has been corrected.
* rs/ref-fitler-used-atoms-value-fix:
ref-filter: remove ref_format_clear()
ref-filter: move is-base tip to used_atom
ref-filter: move ahead-behind bases into used_atom
|
|
Now that ref_format_clear() no longer releases any memory we don't need
it anymore. Remove it and its counterpart, ref_format_init().
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
verify_ref_format() parses a ref-filter format string and stores
recognized items in the static array "used_atom". For
"ahead-behind:<committish>" it stores the committish part in a
string_list member "bases" of struct ref_format.
ref_sorting_options() also parses bare ref-filter format items and
stores stores recognized ones in "used_atom" as well. The committish
parts go to a dummy struct ref_format in parse_sorting_atom(), though,
and are leaked and forgotten.
If verify_ref_format() is called before ref_sorting_options(), like in
git for-each-ref, then all works well if the sort key is included in the
format string. If it isn't then sorting cannot work as the committishes
are missing.
If ref_sorting_options() is called first, like in git branch, then we
have the additional issue that if the sort key is included in the format
string then filter_ahead_behind() can't see its committish, will not
generate any results for it and thus it will be expanded to an empty
string.
Fix those issues by replacing the string_list with a field in used_atom
for storing the committish. This way it can be shared for handling both
ref-filter format strings and sorting options in the same command.
Reported-by: Ross Goldberg <ross.goldberg@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using the show_usage_with_options_if_asked() helper we introduced
earlier, fix callers of usage_with_options() that want to show the
help text when explicitly asked by the end-user. The help text now
goes to the standard output stream for them.
The test in t7600 for "git merge -h" may want to be retired, as the
same is covered by t0012 already, but it is specifically testing that
the "-h" option gets a response even with a corrupt index file, so
for now let's leave it there.
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Start working to make the codebase buildable with -Wsign-compare.
* ps/build-sign-compare:
t/helper: don't depend on implicit wraparound
scalar: address -Wsign-compare warnings
builtin/patch-id: fix type of `get_one_patchid()`
builtin/blame: fix type of `length` variable when emitting object ID
gpg-interface: address -Wsign-comparison warnings
daemon: fix type of `max_connections`
daemon: fix loops that have mismatching integer types
global: trivial conversions to fix `-Wsign-compare` warnings
pkt-line: fix -Wsign-compare warning on 32 bit platform
csum-file: fix -Wsign-compare warning on 32-bit platform
diff.h: fix index used to loop through unsigned integer
config.mak.dev: drop `-Wno-sign-compare`
global: mark code units that generate warnings with `-Wsign-compare`
compat/win32: fix -Wsign-compare warning in "wWinMain()"
compat/regex: explicitly ignore "-Wsign-compare" warnings
git-compat-util: introduce macros to disable "-Wsign-compare" warnings
|
|
"git tag" has been taught to refuse to create refs/tags/HEAD
as such a tag will be confusing in the context of UI provided by
the Git Porcelain commands.
* jc/forbid-head-as-tagname:
tag: "git tag" refuses to use HEAD as a tagname
t5604: do not expect that HEAD can be a valid tagname
refs: drop strbuf_ prefix from helpers
refs: move ref name helpers around
|
|
We have a bunch of loops which iterate up to an unsigned boundary using
a signed index, which generates warnigs because we compare a signed and
unsigned value in the loop condition. Address these sites for trivial
cases and enable `-Wsign-compare` warnings for these code units.
This patch only adapts those code units where we can drop the
`DISABLE_SIGN_COMPARE_WARNINGS` macro in the same step.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The helper functions (strbuf_branchname, strbuf_check_branch_ref,
and strbuf_check_tag_ref) are about handling branch and tag names,
and it is a non-essential fact that these functions use strbuf to
hold these names. Rename them to make it clarify that these are
more about "ref".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sorting options are leaking, but given that they are marked with
`UNLEAK()` the leak sanitizer doesn't complain.
Fix the leak by creating a common exit path and clearing the vector such
that we can get rid of the `UNLEAK()` annotation entirely.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The convention to calling into built-in command implementation has
been updated to pass the repository, if known, together with the
prefix value.
* jc/pass-repo-to-builtins:
add: pass in repo variable instead of global the_repository
builtin: remove USE_THE_REPOSITORY for those without the_repository
builtin: remove USE_THE_REPOSITORY_VARIABLE from builtin.h
builtin: add a repository parameter for builtin functions
|
|
Instead of including USE_THE_REPOSITORY_VARIABLE by default on every
builtin, remove it from builtin.h and add it to all the builtins that
include builtin.h (by definition, that means all builtins/*.c).
Also, remove the include statement for repository.h since it gets
brought in through builtin.h.
The next step will be to migrate each builtin
from having to use the_repository.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to reduce the usage of the global the_repository, add a
parameter to builtin functions that will get passed a repository
variable.
This commit uses UNUSED on most of the builtin functions, as subsequent
commits will modify the actual builtins to pass the repository parameter
down.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After using the ref-filter API, callers should use ref_filter_clear() to
free any used memory. However, there's not a matching function to clear
the ref_format struct.
Traditionally this did not need to be cleaned up, as it was just a way
for the caller to store and pass format options as a single unit. Even
though the parsing step of some placeholders may allocate data, that's
usually inside their "used_atom" structs, which are part of the
ref_filter itself.
But a few placeholders keep data outside of there. The %(ahead-behind)
and %(is-base) parsers both keep a master list of bases, because they
perform a single filtering pass outside of the use of any particular
atom. And since the format parser does not have access to the ref_filter
struct, they store their cross-atom data in the ref_format struct
itself.
And thus when they are finished, the ref_format also needs to be cleaned
up. So let's add a function to do so, and call it from all of the users
of the ref-filter API.
The %(is-base) case is found by running LSan on t6300. After this patch,
the script can now be marked leak-free.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor functions that rename or copy config sections to accept a
`struct repository` such that we can get rid of the implicit dependency
on `the_repository`. Rename the functions accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Updates to symbolic refs can now be made as a part of ref
transaction.
* kn/ref-transaction-symref:
refs: remove `create_symref` and associated dead code
refs: rename `refs_create_symref()` to `refs_update_symref()`
refs: use transaction in `refs_create_symref()`
refs: add support for transactional symref updates
refs: move `original_update_refname` to 'refs.c'
refs: support symrefs in 'reference-transaction' hook
files-backend: extract out `create_symref_lock()`
refs: accept symref values in `ref_transaction_update()`
|
|
Apply the rules that rewrite callers of "refs" interfaces to explicitly
pass `struct ref_store`. The resulting patch has been applied with the
`--whitespace=fix` option.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `refs_create_symref()` function is used to update/create a symref.
But it doesn't check the old target of the symref, if existing. It force
updates the symref. In this regard, the name `refs_create_symref()` is a
bit misleading. So let's rename it to `refs_update_symref()`. This is
akin to how 'git-update-ref(1)' also allows us to create apart from
update.
While we're here, rename the arguments in the function to clarify what
they actually signify and reduce confusion.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
core.commentChar used to be limited to a single byte, but has been
updated to allow an arbitrary multi-byte sequence.
* jk/core-comment-string:
config: add core.commentString
config: allow multi-byte core.commentChar
environment: drop comment_line_char compatibility macro
wt-status: drop custom comment-char stringification
sequencer: handle multi-byte comment characters when writing todo list
find multi-byte comment chars in unterminated buffers
find multi-byte comment chars in NUL-terminated strings
prefer comment_line_str to comment_line_char for printing
strbuf: accept a comment string for strbuf_add_commented_lines()
strbuf: accept a comment string for strbuf_commented_addf()
strbuf: accept a comment string for strbuf_stripspace()
environment: store comment_line_char as a string
strbuf: avoid shadowing global comment_line_char name
commit: refactor base-case of adjust_comment_line_char()
strbuf: avoid static variables in strbuf_add_commented_lines()
strbuf: simplify comment-handling in add_lines() helper
config: forbid newline as core.commentChar
|
|
When git refuses to create a branch because the proposed branch
name is not a valid refname, an advice message is given to refer
the user to exact naming rules.
* kh/branch-ref-syntax-advice:
branch: advise about ref syntax rules
advice: use double quotes for regular quoting
advice: use backticks for verbatim
advice: make all entries stylistically consistent
t3200: improve test style
|
|
As part of our transition to multi-byte comment characters, we should
use the string variable rather than the historical character variable.
All of the sites adjusted here are just swapping out "%c" for "%s" in
format strings, or strbuf_addch() for strbuf_addstr(). The type system
and printf-attribute give the compiler enough information to make sure
our formats and variable changes all match (especially important for
cases where the format string is defined far away from its use, like
prepare_to_commit() in commit.c).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As part of our transition to multi-byte comment characters, let's take a
NUL-terminated string pointer for strbuf_commented_addf() rather than a
single character.
All of the callers have to be adjusted, but they can just pass
comment_line_str rather than comment_line_char.
Note that we rely on strbuf_add_commented_lines() under the hood, so
we'll cheat a bit to squeeze our string into a single character (for now
the two are equivalent, and we'll address this TODO in the next patch).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As part of our transition to multi-byte comment characters, let's take a
NUL-terminated string pointer for strbuf_stripspace(), rather than a
single character. We can continue to support its feature of ignoring
comments by accepting a NULL pointer (as opposed to the current behavior
of a NUL byte).
All of the callers have to be adjusted, but they can all just pass
comment_line_str (or NULL).
Inside the function we detect comments by comparing the first byte of a
line to the comment character. We'll adjust that to use starts_with(),
which will match multiple bytes (though for now, of course, we still
only allow a single byte, so it's academic).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-branch(1) will error out if you give it a bad ref name. But the user
might not understand why or what part of the name is illegal.
The user might know that there are some limitations based on the *loose
ref* format (filenames), but there are also further rules for
easier integration with shell-based tools, pathname expansion, and
playing well with reference name expressions.
The man page for git-check-ref-format(1) contains these rules. Let’s
advise about it since that is not a command that you just happen
upon. Also make this advise configurable since you might not want to be
reminded every time you make a little typo.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some functions in Git's source code follow the convention that returning
a negative value indicates a fatal error, e.g. repository corruption.
Let's use this convention in `repo_in_merge_bases()` to report when one
of the specified commits is missing (i.e. when `repo_parse_commit()`
reports an error).
Also adjust the callers of `repo_in_merge_bases()` to handle such
negative return values.
Note: As of this patch, errors are returned only if any of the specified
merge heads is missing. Over the course of the next patches, missing
commits will also be reported by the `paint_down_to_common()` function,
which is called by `repo_in_merge_bases_many()`, and those errors will
be properly propagated back to the caller at that stage.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The error message we show when the user tries to delete a not fully
merged branch describes the error and gives a hint to the user:
error: the branch 'foo' is not fully merged.
If you are sure you want to delete it, run 'git branch -D foo'.
Let's move the hint part so that it is displayed using the advice
machinery:
error: the branch 'foo' is not fully merged
hint: If you are sure you want to delete it, run 'git branch -D foo'
hint: Disable this message with "git config advice.forceDeleteBranch false"
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove unused header "#include".
* en/header-cleanup:
treewide: remove unnecessary includes in source files
treewide: add direct includes currently only pulled in transitively
trace2/tr2_tls.h: remove unnecessary include
submodule-config.h: remove unnecessary include
pkt-line.h: remove unnecessary include
line-log.h: remove unnecessary include
http.h: remove unnecessary include
fsmonitor--daemon.h: remove unnecessary includes
blame.h: remove unnecessary includes
archive.h: remove unnecessary include
treewide: remove unnecessary includes in source files
treewide: remove unnecessary includes from header files
|
|
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git for-each-ref --no-sort" still sorted the refs alphabetically
which paid non-trivial cost. It has been redefined to show output
in an unspecified order, to allow certain optimizations to take
advantage of.
* vd/for-each-ref-unsorted-optimization:
t/perf: add perf tests for for-each-ref
ref-filter.c: use peeled tag for '*' format fields
for-each-ref: clean up documentation of --format
ref-filter.c: filter & format refs in the same callback
ref-filter.c: refactor to create common helper functions
ref-filter.c: rename 'ref_filter_handler()' to 'filter_one()'
ref-filter.h: add functions for filter/format & format-only
ref-filter.h: move contains caches into filter
ref-filter.h: add max_count and omit_empty to ref_format
ref-filter.c: really don't sort when using --no-sort
|
|
Add two new public methods to 'ref-filter.h':
* 'print_formatted_ref_array()' which, given a format specification & array
of ref items, formats and prints the items to stdout.
* 'filter_and_format_refs()' which combines 'filter_refs()',
'ref_array_sort()', and 'print_formatted_ref_array()' into a single
function.
This consolidates much of the code used to filter and format refs in
'builtin/for-each-ref.c', 'builtin/tag.c', and 'builtin/branch.c', reducing
duplication and simplifying the future changes needed to optimize the filter
& format process.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add an internal 'array_opts' struct to 'struct ref_format' containing
formatting options that pertain to the formatting of an entire ref array:
'max_count' and 'omit_empty'. These values are specified by the '--count'
and '--omit-empty' options, respectively, to 'for-each-ref'/'tag'/'branch'.
Storing these values in the 'ref_format' will simplify the consolidation of
ref array formatting logic across builtins in later patches.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When '--no-sort' is passed to 'for-each-ref', 'tag', and 'branch', the
printed refs are still sorted by ascending refname. Change the handling of
sort options in these commands so that '--no-sort' to truly disables
sorting.
'--no-sort' does not disable sorting in these commands is because their
option parsing does not distinguish between "the absence of '--sort'"
(and/or values for tag.sort & branch.sort) and '--no-sort'. Both result in
an empty 'sorting_options' string list, which is parsed by
'ref_sorting_options()' to create the 'struct ref_sorting *' for the
command. If the string list is empty, 'ref_sorting_options()' interprets
that as "the absence of '--sort'" and returns the default ref sorting
structure (equivalent to "refname" sort).
To handle '--no-sort' properly while preserving the "refname" sort in the
"absence of --sort'" case, first explicitly add "refname" to the string list
*before* parsing options. This alone doesn't actually change any behavior,
since 'compare_refs()' already falls back on comparing refnames if two refs
are equal w.r.t all other sort keys.
Now that the string list is populated by default, '--no-sort' is the only
way to empty the 'sorting_options' string list. Update
'ref_sorting_options()' to return a NULL 'struct ref_sorting *' if the
string list is empty, and add a condition to 'ref_array_sort()' to skip the
sort altogether if the sort structure is NULL. Note that other functions
using 'struct ref_sorting *' do not need any changes because they already
ignore NULL values.
Finally, remove the condition around sorting in 'ls-remote', since it's no
longer necessary. Unlike 'for-each-ref' et. al., it does *not* do any
sorting by default. This default is preserved by simply leaving its sort key
string list empty before parsing options; if no additional sort keys are
set, 'struct ref_sorting *' is NULL and sorting is skipped.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As per the CodingGuidelines document, it is recommended that error messages
such as die(), error() and warning(), should start with a lowercase letter
and should not end with a period.
This patch adjusts tests to match updated messages.
Signed-off-by: Isoken June Ibizugbe <isokenjune@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A message written in olden time prevented a branch from getting
checked out saying it is already checked out elsewhere, but these
days, we treat a branch that is being bisected or rebased just like
a branch that is checked out and protect it. Rephrase the message
to say that the branch is in use.
* rj/branch-in-use-error-message:
branch: error message checking out a branch in use
branch: error message deleting a branch in use
|
|
Let's update the error message we show when the user tries to delete a
branch which is being used in another worktree, following the guideline
reasoned in 4970bedef2 (branch: update the message to refuse touching a
branch in-use, 2023-07-21).
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Command line parser fixes.
* jc/branch-parseopt-fix:
branch: reject "--no-all" and "--no-remotes" early
|
|
Enumerating refs in the packed-refs file, while excluding refs that
match certain patterns, has been optimized.
* tb/refs-exclusion-and-packed-refs:
ls-refs.c: avoid enumerating hidden refs where possible
upload-pack.c: avoid enumerating hidden refs where possible
builtin/receive-pack.c: avoid enumerating hidden references
refs.h: implement `hidden_refs_to_excludes()`
refs.h: let `for_each_namespaced_ref()` take excluded patterns
revision.h: store hidden refs in a `strvec`
refs/packed-backend.c: add trace2 counters for jump list
refs/packed-backend.c: implement jump lists to avoid excluded pattern(s)
refs/packed-backend.c: refactor `find_reference_location()`
refs: plumb `exclude_patterns` argument throughout
builtin/for-each-ref.c: add `--exclude` option
ref-filter.c: parameterize match functions over patterns
ref-filter: add `ref_filter_clear()`
ref-filter: clear reachable list pointers after freeing
ref-filter.h: provide `REF_FILTER_INIT`
refs.c: rename `ref_filter`
|
|
As the command line parser for "git branch --all" forgets to use
PARSE_OPT_NONEG, it accepted "git branch --no-all", and then passed
a nonsense value to the underlying machinery, leading to a fatal
error "filter_refs: invalid type". The "--remotes" option had
exactly the same issue.
Catch the unsupported options early in the option parser.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Further shuffling of declarations across header files to streamline
file dependencies.
* cw/compat-util-header-cleanup:
git-compat-util: move alloc macros to git-compat-util.h
treewide: remove unnecessary includes for wrapper.h
kwset: move translation table from ctype
sane-ctype.h: create header for sane-ctype macros
git-compat-util: move wrapper.c funcs to its header
git-compat-util: move strbuf.c funcs to its header
|
|
We did not bother to clean up at all in `git branch` or `git tag`, and
`git for-each-ref` only cleans up a couple of members.
Add and call `ref_filter_clear()` when cleaning up a `struct
ref_filter`. Running this patch (without any test changes) indicates a
couple of now leak-free tests. This was found by running:
$ make SANITIZE=leak
$ make -C t GIT_TEST_PASSING_SANITIZE_LEAK=check GIT_TEST_OPTS=--immediate
(Note that the `reachable_from` and `unreachable_from` lists should be
cleaned as they are used. So this is just covering any case where we
might bail before running the reachability check.)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Provide a sane initialization value for `struct ref_filter`, which in a
subsequent patch will be used to initialize a new field.
In the meantime, ensure that the `ref_filter` struct used in the
test-helper's `cmd__reach()` is zero-initialized. The lack of
initialization is OK, since `commit_contains()` only looks at the single
`with_commit_tag_algo` field that *is* initialized directly above.
So this does not fix a bug, but rather prevents one from biting us in
the future.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reduce reliance on a global state in the config reading API.
* gc/config-context:
config: pass source to config_parser_event_fn_t
config: add kvi.path, use it to evaluate includes
config.c: remove config_reader from configsets
config: pass kvi to die_bad_number()
trace2: plumb config kvi
config.c: pass ctx with CLI config
config: pass ctx with config files
config.c: pass ctx in configsets
config: add ctx arg to config_fn_t
urlmatch.h: use config_fn_t type
config: inline git_color_default_config
|
|
Move functions that are not about pure string manipulation out of
strbuf.[ch]
* cw/strbuf-cleanup:
strbuf: remove global variable
path: move related function to path
object-name: move related functions to object-name
credential-store: move related functions to credential-store file
abspath: move related functions to abspath
strbuf: clarify dependency
strbuf: clarify API boundary
|
|
Code clean-up around strbuf_expand() API.
* rs/strbuf-expand-step:
strbuf: simplify strbuf_expand_literal_cb()
replace strbuf_expand() with strbuf_expand_step()
replace strbuf_expand_dict_cb() with strbuf_expand_step()
strbuf: factor out strbuf_expand_step()
pretty: factor out expand_separator()
|
|
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
