| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In "config.c" we host both the business logic to read and write config
files as well as the logic to parse specific Git-related variables. On
the one hand this is mixing concerns, but even more importantly it means
that we cannot easily remove the dependency on `the_repository` in our
config parsing logic.
Move the logic into "environment.c". This file is a grab bag of all
kinds of global state already, so it is quite a good fit. Furthermore,
it also hosts most of the global variables that we're parsing the config
values into, making this an even better fit.
Note that there is one hidden change: in `parse_fsync_components()` we
use an `int` to iterate through `ARRAY_SIZE(fsync_component_names)`. But
as -Wsign-compare warnings are enabled in this file this causes a
compiler warning. The issue is fixed by using a `size_t` instead.
This change allows us to drop the `USE_THE_REPOSITORY_VARIABLE`
declaration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config()`. All callsites
are adjusted so that they use `repo_config(the_repository, ...)`
instead. While some callsites might already have a repository available,
this mechanical conversion is the exact same as the current situation
and thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The help text from "git $cmd -h" appear on the standard output for
some $cmd and the standard error for others. The built-in commands
have been fixed to show them on the standard output consistently.
* jc/show-usage-help:
builtin: send usage() help text to standard output
oddballs: send usage() help text to standard output
builtins: send usage_with_options() help text to standard output
usage: add show_usage_if_asked()
parse-options: add show_usage_with_options_if_asked()
t0012: optionally check that "-h" output goes to stdout
|
|
Using the show_usage_if_asked() helper we introduced earlier, fix
callers of usage() that want to show the help text when explicitly
asked by the end-user. The help text now goes to the standard
output stream for them.
The callers in this step are oddballs in that their invocations of
usage() are *not* guarded by
if (argc == 2 && !strcmp(argv[1], "-h")
usage(...);
There are (unnecessarily) being clever ones that do things like
if (argc != 2 || !strcmp(argv[1], "-h")
usage(...);
to say "I know I take only one argument, so argc != 2 is always an
error regardless of what is in argv[]. Ah, by the way, even if argc
is 2, "-h" is a request for usage text, so we do the same".
Some like "git var -h" just do not treat "-h" any specially, and let
it take the same error code paths as a parameter error.
Now we cannot do the same, so these callers are rewrittin to do the
show_usage_and_exit_if_asked() first and then handle the usage error
the way they used to.
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop using `the_repository` in the "credential" subsystem by passing in
a repository when filling, approving or rejecting credentials.
Adjust callers accordingly by using `the_repository`. While there may be
some callers that have a repository available in their context, this
trivial conversion allows for easier verification and bubbles up the use
of `the_repository` by one level.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of including USE_THE_REPOSITORY_VARIABLE by default on every
builtin, remove it from builtin.h and add it to all the builtins that
include builtin.h (by definition, that means all builtins/*.c).
Also, remove the include statement for repository.h since it gets
brought in through builtin.h.
The next step will be to migrate each builtin
from having to use the_repository.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to reduce the usage of the global the_repository, add a
parameter to builtin functions that will get passed a repository
variable.
This commit uses UNUSED on most of the builtin functions, as subsequent
commits will modify the actual builtins to pass the repository parameter
down.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We never release memory associated with `struct credential`. Fix this
and mark the corresponding test as leak free.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Right now, there's no specific way to determine whether a credential
helper or git credential itself supports a given set of capabilities.
It would be helpful to have such a way, so let's let credential helpers
and git credential take an argument, "capability", which has it list the
capabilities and a version number on standard output.
Specifically choose a format that is slightly different from regular
credential output and assume that no capabilities are supported if a
non-zero exit status occurs or the data deviates from the format. It is
common for users to write small shell scripts as the argument to
credential.helper, which will almost never be designed to emit
capabilities. We want callers to gracefully handle this case by
assuming that they are not capable of extended support because that is
almost certainly the case, and specifying the error behavior up front
does this and preserves backwards compatibility in a graceful way.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Over HTTP, NTLM and Kerberos require two rounds of authentication on the
client side. It's possible that there are custom authentication schemes
that also implement this same approach. Since these are tricky schemes
to implement and the HTTP library in use may not always handle them
gracefully on all systems, it would be helpful to allow the credential
helper to implement them instead for increased portability and
robustness.
To allow this to happen, add a boolean flag, continue, that indicates
that instead of failing when we get a 401, we should retry another round
of authentication. However, this necessitates some changes in our
current credential code so that we can make this work.
Keep the state[] headers between iterations, but only use them to send
to the helper and only consider the new ones we read from the credential
helper to be valid on subsequent iterations. That avoids us passing
stale data when we finally approve or reject the credential. Similarly,
clear the multistage and wwwauth[] values appropriately so that we
don't pass stale data or think we're trying a multiround response when
we're not. Remove the credential values so that we can actually fill a
second time with new responses.
Limit the number of iterations of reauthentication we do to 3. This
means that if there's a problem, we'll terminate with an error message
instead of retrying indefinitely and not informing the user (and
possibly conducting a DoS on the server).
In our tests, handle creating multiple response output files from our
helper so we can verify that each of the messages sent is correct.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We support the new credential and authtype fields, but we lack a way to
indicate to a credential helper that we'd like them to be used. Without
some sort of indication, the credential helper doesn't know if it should
try to provide us a username and password, or a pre-encoded credential.
For example, the helper might prefer a more restricted Bearer token if
pre-encoded credentials are possible, but might have to fall back to
more general username and password if not.
Let's provide a simple way to indicate whether Git (or, for that matter,
the helper) is capable of understanding the authtype and credential
fields. We send this capability when we generate a request, and the
other side may reply to indicate to us that it does, too.
For now, don't enable sending capabilities for the HTTP code. In a
future commit, we'll introduce appropriate handling for that code,
which requires more in-depth work.
The logic for determining whether a capability is supported may seem
complex, but it is not. At each stage, we emit the capability to the
following stage if all preceding stages have declared it. Thus, if the
caller to git credential fill didn't declare it, then we won't send it
to the helper, and if fill's caller did send but the helper doesn't
understand it, then we won't send it on in the response. If we're an
internal user, then we know about all capabilities and will request
them.
For "git credential approve" and "git credential reject", we set the
helper capability before calling the helper, since we assume that the
input we're getting from the external program comes from a previous call
to "git credential fill", and thus we'll invoke send a capability to the
helper if and only if we got one from the standard input, which is the
correct behavior.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All builtins receive a "prefix" parameter, but it is only useful if they
need to adjust filenames given by the user on the command line. For
builtins that do not even call parse_options(), they often don't look at
the prefix at all, and -Wunused-parameter complains.
Let's annotate those to silence the compiler warning. I gave a quick
scan of each of these cases, and it seems like they don't have anything
they _should_ be using the prefix for (i.e., there is no hidden bug that
we are missing). The only questionable cases I saw were:
- in git-unpack-file, we create a tempfile which will always be at the
root of the repository, even if the command is run from a subdir.
Arguably this should be created in the subdir from which we're run
(as we report the path only as a relative name). However, nobody has
complained, and I'm hesitant to change something that is deep
plumbing going back to April 2005 (though I think within our
scripts, the sole caller in git-merge-one-file would be OK, as it
moves to the toplevel itself).
- in fetch-pack, local-filesystem remotes are taken as relative to the
project root, not the current directory. So:
git init server.git
[...put stuff in server.git...]
git init client.git
cd client.git
mkdir subdir
cd subdir
git fetch-pack ../../server.git ...
won't work, as we quietly move to the top of the repository before
interpreting the path (so "../server.git" would work). This is
weird, but again, nobody has complained and this is how it has
always worked. And this is how "git fetch" works, too. Plus it
raises questions about how a configured remote like:
git config remote.origin.url ../server.git
should behave. I can certainly come up with a reasonable set of
behavior, but it may not be worth stirring up complications in a
plumbing tool.
So I've left the behavior untouched in both of those cases. If anybody
really wants to revisit them, it's easy enough to drop the UNUSED
marker. This commit is just about removing them as obstacles to turning
on -Wunused-parameter all the time.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The subcommand of git credential is not optional.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make `git credential fill` honour the core.askPass variable.
Signed-off-by: Thomas Koutcher <thomas.koutcher@online.fr>
[jk: added test]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git-credential command only takes one argument: the
operation to perform. If we don't have one, we complain
immediately. But if we have one that we don't recognize, we
don't notice until after we've read the credential from
stdin. This is likely to confuse a user invoking "git
credential -h", as the program will hang waiting for their
input before showing anything.
Let's detect this case early. Likewise, we never noticed
when there are extra arguments beyond the one we're
expecting. Let's catch this with the same conditional.
Note that we don't need to handle "--help" similarly,
because the git wrapper does this before even calling
cmd_credential().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of outputing only the username and password, print all the
attributes, even those that already appeared in the input.
This is closer to what the C API does, and allows one to take the exact
output of "git credential fill" as input to "git credential approve" or
"git credential reject".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The credential API is in C, and not available to scripting languages.
Expose the functionalities of the API by wrapping them into a new
plumbing command "git credentials".
In other words, replace the internal "test-credential" by an official Git
command.
Most documentation writen by: Jeff King <peff@peff.net>
Signed-off-by: Pavel Volek <Pavel.Volek@ensimag.imag.fr>
Signed-off-by: Kim Thuat Nguyen <Kim-Thuat.Nguyen@ensimag.imag.fr>
Signed-off-by: Javier Roucher Iglesias <Javier.Roucher-Iglesias@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
