| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git ls-files <pathspec>..." should not necessarily have to expand
the index fully if a sparsified directory is excluded by the
pathspec; the code is taught to expand the index on demand to avoid
this.
* ds/ls-files-lazy-unsparse:
ls-files: conditionally leave index sparse
|
|
When running 'git ls-files' with a pathspec, the index entries get
filtered according to that pathspec before iterating over them in
show_files(). In 78087097b8 (ls-files: add --sparse option,
2021-12-22), this iteration was prefixed with a check for the '--sparse'
option which allows the command to output directory entries; this
created a pre-loop call to ensure_full_index().
However, when a user runs 'git ls-files' where the pathspec matches
directories that are recursively matched in the sparse-checkout, there
are not any sparse directories that match the pathspec so they would not
be written to the output. The expansion in this case is just a
performance drop for no behavior difference.
Replace this global check to expand the index with a check inside the
loop for a matched sparse directory. If we see one, then expand the
index and continue from the current location. This is safe since the
previous entries in the index did not have any sparse directories and
thus would remain stable in this expansion.
A test in t1092 confirms that this changes the behavior.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In "config.c" we host both the business logic to read and write config
files as well as the logic to parse specific Git-related variables. On
the one hand this is mixing concerns, but even more importantly it means
that we cannot easily remove the dependency on `the_repository` in our
config parsing logic.
Move the logic into "environment.c". This file is a grab bag of all
kinds of global state already, so it is quite a good fit. Furthermore,
it also hosts most of the global variables that we're parsing the config
values into, making this an even better fit.
Note that there is one hidden change: in `parse_fsync_components()` we
use an `int` to iterate through `ARRAY_SIZE(fsync_component_names)`. But
as -Wsign-compare warnings are enabled in this file this causes a
compiler warning. The issue is fixed by using a `size_t` instead.
This change allows us to drop the `USE_THE_REPOSITORY_VARIABLE`
declaration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename `oid_object_info()` to `odb_read_object_info()` as well as their
`_extended()` variant to match other functions related to the object
database and our modern coding guidelines.
Introduce compatibility wrappers so that any in-flight topics will
continue to compile.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the preceding commits we have renamed the structures contained in
"object-store.h" to `struct object_database` and `struct odb_backend`.
As such, the code files "object-store.{c,h}" are confusingly named now.
Rename them to "odb.{c,h}" accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The object layer has been updated to take an explicit repository
instance as a parameter in more code paths.
* ps/object-wo-the-repository:
hash: stop depending on `the_repository` in `null_oid()`
hash: fix "-Wsign-compare" warnings
object-file: split out logic regarding hash algorithms
delta-islands: stop depending on `the_repository`
object-file-convert: stop depending on `the_repository`
pack-bitmap-write: stop depending on `the_repository`
pack-revindex: stop depending on `the_repository`
pack-check: stop depending on `the_repository`
environment: move access to "core.bigFileThreshold" into repo settings
pack-write: stop depending on `the_repository` and `the_hash_algo`
object: stop depending on `the_repository`
csum-file: stop depending on `the_repository`
|
|
The `null_oid()` function returns the object ID that only consists of
zeroes. Naturally, this ID also depends on the hash algorithm used, as
the number of zeroes is different between SHA1 and SHA256. Consequently,
the function returns the hash-algorithm-specific null object ID.
This is currently done by depending on `the_hash_algo`, which implicitly
makes us depend on `the_repository`. Refactor the function to instead
pass in the hash algorithm for which we want to retrieve the null object
ID. Adapt callsites accordingly by passing in `the_repository`, thus
bubbling up the dependency on that global variable by one layer.
There are a couple of trivial exceptions for subsystems that already got
rid of `the_repository`. These subsystems instead use the repository
that is available via the calling context:
- "builtin/grep.c"
- "grep.c"
- "refs/debug.c"
There are also two non-trivial exceptions:
- "diff-no-index.c": Here we know that we may not have a repository
initialized at all, so we cannot rely on `the_repository`. Instead,
we adapt `diff_no_index()` to get a `struct git_hash_algo` as
parameter. The only caller is located in "builtin/diff.c", where we
know to call `repo_set_hash_algo()` in case we're running outside of
a Git repository. Consequently, it is fine to continue passing
`the_repository->hash_algo` even in this case.
- "builtin/ls-files.c": There is an in-flight patch series that drops
`USE_THE_REPOSITORY_VARIABLE` in this file, which causes a semantic
conflict because we use `null_oid()` in `show_submodule()`. The
value is passed to `repo_submodule_init()`, which may use the object
ID to resolve a tree-ish in the superproject from which we want to
read the submodule config. As such, the object ID should refer to an
object in the superproject, and consequently we need to use its hash
algorithm.
This means that we could in theory just not bother about this edge
case at all and just use `the_repository` in "diff-no-index.c". But
doing so would feel misdesigned.
Remove the `USE_THE_REPOSITORY_VARIABLE` preprocessor define in
"hash.c".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the_repository global variable in favor of the repository
argument that gets passed in "builtin/ls-files.c".
When `-h` is passed to the command outside a Git repository, the
`run_builtin()` will call the `cmd_ls_files()` function with `repo` set
to NULL and then early in the function, `show_usage_with_options_if_asked()`
call will give the options help and exit.
Pass the repository available in the calling context to both
`expand_objectsize()` and `show_ru_info()` to remove their
dependency on the global `the_repository` variable.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Usman Akinyemi <usmanakinyemi202@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using the show_usage_with_options_if_asked() helper we introduced
earlier, fix callers of usage_with_options() that want to show the
help text when explicitly asked by the end-user. The help text now
goes to the standard output stream for them.
The test in t7600 for "git merge -h" may want to be retired, as the
same is covered by t0012 already, but it is specifically testing that
the "-h" option gets a response even with a corrupt index file, so
for now let's leave it there.
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix typos in comments.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of including USE_THE_REPOSITORY_VARIABLE by default on every
builtin, remove it from builtin.h and add it to all the builtins that
include builtin.h (by definition, that means all builtins/*.c).
Also, remove the include statement for repository.h since it gets
brought in through builtin.h.
The next step will be to migrate each builtin
from having to use the_repository.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to reduce the usage of the global the_repository, add a
parameter to builtin functions that will get passed a repository
variable.
This commit uses UNUSED on most of the builtin functions, as subsequent
commits will modify the actual builtins to pass the repository parameter
down.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extract a function for reporting placeholders that are not enclosed in a
parenthesis or are unknown. This reduces the number of strings to
translate and improves consistency across commands. Call it at the end
of the if/else chain, after exhausting all accepted possibilities.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up around strbuf_expand() API.
* rs/strbuf-expand-step:
strbuf: simplify strbuf_expand_literal_cb()
replace strbuf_expand() with strbuf_expand_step()
replace strbuf_expand_dict_cb() with strbuf_expand_step()
strbuf: factor out strbuf_expand_step()
pretty: factor out expand_separator()
|
|
This also made it clear that several .c files that depended upon path.h
were missing a #include for it; add the missing includes while at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For the functions defined in read-cache.c, move their declarations from
cache.h to a new header, read-cache-ll.h. Also move some related inline
functions from cache.h to read-cache.h. The purpose of the
read-cache-ll.h/read-cache.h split is that about 70% of the sites don't
need the inline functions and the extra headers they include.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Note in particular that this reverses the decision made in 118a2e8bde0
("cache: move ensure_full_index() to cache.h", 2021-04-01).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function overlay_tree_on_index(), plus associated helper functions,
were defined in builtin/ls-files.c, but also shared with
builtin/commit.c. Move these shared functions to read-cache.c.
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that strbuf_expand_literal_cb() is no longer used as a callback,
drop its "_cb" name suffix and unused context parameter.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid the overhead of passing context to a callback function of
strbuf_expand() by using strbuf_expand_step() in a loop instead. It
requires explicit handling of %% and unrecognized placeholders, but is
simpler, more direct and avoids void pointers.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git ls-files --format" can be used to format the output of
multiple file entries in the index, while "git ls-tree --format"
can be used to format the contents of a tree object. However,
the current set of %(objecttype), "(objectsize)", and
"%(objectsize:padded)" atoms supported by "git ls-files --format"
is a subset of what is available in "git ls-tree --format".
Users sometimes need to establish a unified view between the index
and tree, which can help with comparison or conversion between the two.
Therefore, this patch adds the missing atoms to "git ls-files --format".
"%(objecttype)" can be used to retrieve the object type corresponding
to a file in the index, "(objectsize)" can be used to retrieve the
object size corresponding to a file in the index, and "%(objectsize:padded)"
is the same as "(objectsize)", except with padded format.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Header clean-up.
* en/header-split-cache-h: (24 commits)
protocol.h: move definition of DEFAULT_GIT_PORT from cache.h
mailmap, quote: move declarations of global vars to correct unit
treewide: reduce includes of cache.h in other headers
treewide: remove double forward declaration of read_in_full
cache.h: remove unnecessary includes
treewide: remove cache.h inclusion due to pager.h changes
pager.h: move declarations for pager.c functions from cache.h
treewide: remove cache.h inclusion due to editor.h changes
editor: move editor-related functions and declarations into common file
treewide: remove cache.h inclusion due to object.h changes
object.h: move some inline functions and defines from cache.h
treewide: remove cache.h inclusion due to object-file.h changes
object-file.h: move declarations for object-file.c functions from cache.h
treewide: remove cache.h inclusion due to git-zlib changes
git-zlib: move declarations for git-zlib functions from cache.h
treewide: remove cache.h inclusion due to object-name.h changes
object-name.h: move declarations for object-name.c functions from cache.h
treewide: remove unnecessary cache.h inclusion
treewide: be explicit about dependence on mem-pool.h
treewide: be explicit about dependence on oid-array.h
...
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Split key function and data structure definitions out of cache.h to
new header files and adjust the users.
* en/header-split-cleanup:
csum-file.h: remove unnecessary inclusion of cache.h
write-or-die.h: move declarations for write-or-die.c functions from cache.h
treewide: remove cache.h inclusion due to setup.h changes
setup.h: move declarations for setup.c functions from cache.h
treewide: remove cache.h inclusion due to environment.h changes
environment.h: move declarations for environment.c functions from cache.h
treewide: remove unnecessary includes of cache.h
wrapper.h: move declarations for wrapper.c functions from cache.h
path.h: move function declarations for path.c functions from cache.h
cache.h: remove expand_user_path()
abspath.h: move absolute path functions from cache.h
environment: move comment_line_char from cache.h
treewide: remove unnecessary cache.h inclusion from several sources
treewide: remove unnecessary inclusion of gettext.h
treewide: be explicit about dependence on gettext.h
treewide: remove unnecessary cache.h inclusion from a few headers
|
|
Code clean-up around the use of the_repository.
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
|
|
en/header-split-cache-h
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
|
|
Apply the part of "the_repository.pending.cocci" pertaining to
"cache.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix for a "ls-files --format="%(path)" that produced nonsense
output, which was a bug in 2.38.
* aj/ls-files-format-fix:
ls-files: fix "--format" output of relative paths
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a bug introduced with the "--format" option in
ce74de93 (ls-files: introduce "--format" option, 2022-07-23),
where relative paths were computed using the output buffer,
which could lead to random garbage data in the output.
Signed-off-by: Adam Johnson <me@adamj.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a memory leak in overlay_tree_on_index(), we need to
clear_pathspec() at some point, which might as well be after the last
time we use it in the function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
ce74de9(ls-files: introduce "--format" option) miss
a space between two words incorrectly, it leads to
wrong i10n messages. So fix it by adding a space at
the end of the error message.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new option "--format" that outputs index entries
informations in a custom format, taking inspiration
from the option with the same name in the `git ls-tree`
command.
"--format" cannot used with "-s", "-o", "-k", "-t",
" --resolve-undo","--deduplicate" and "--eol".
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
e77aa336f1 ("ls-files: optionally recurse into submodules", 2016-10-10)
taught ls-files the --recurse-submodules argument, but only in a limited
set of circumstances. In particular, --stage was unsupported, perhaps
because there was no repo_find_unique_abbrev(), which was only
introduced in 8bb95572b0 ("sha1-name.c: add
repo_find_unique_abbrev_r()", 2019-04-16). This function is needed for
using --recurse-submodules with --stage.
Now that we have repo_find_unique_abbrev(), teach support for this
combination of arguments.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar message templates have been consolidated so that
translators need to work on fewer number of messages.
* ja/i18n-similar-messages:
i18n: turn even more messages into "cannot be used together" ones
i18n: ref-filter: factorize "%(foo) atom used without %(bar) atom"
i18n: factorize "--foo outside a repository"
i18n: refactor "unrecognized %(foo) argument" strings
i18n: factorize "no directory given for --foo"
i18n: factorize "--foo requires --bar" and the like
i18n: tag.c factorize i18n strings
i18n: standardize "cannot open" and "cannot read"
i18n: turn "options are incompatible" into "cannot be used together"
i18n: refactor "%s, %s and %s are mutually exclusive"
i18n: refactor "foo and bar are mutually exclusive"
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Existing callers to 'git ls-files' are expecting file names, not
directories. It is best to expand a sparse index to show all of the
contained files in this case.
However, expert users may want to inspect the contents of the index
itself including which directories are sparse. Add a --sparse option to
allow users to request this information.
During testing, I noticed that options such as --modified did not affect
the output when the files in question were outside the sparse-checkout
definition. Tests are added to document this preexisting behavior and
how it remains unchanged with the sparse index and the --sparse option.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a memory leak that's been here ever since 72aeb18772d (clean.c,
ls-files.c: respect encapsulation of exclude_list_groups, 2013-01-16),
we dup'd the argument in option_parse_exclude(), but never freed the
string_list.
This makes almost all of t3001-ls-files-others-exclude.sh pass (it had
a lot of failures before). Let's mark it as passing with
TEST_PASSES_SANITIZE_LEAK=true, and then exclude the tests that still
failed with a !SANITIZE_LEAK prerequisite check until we fix those
leaks. We can still see the failed tests under
GIT_TEST_FAIL_PREREQS=true.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix an edge case that was missed when the dir_clear() call was added
in eceba532141 (dir: fix problematic API to avoid memory leaks,
2020-08-18), we need to also clean up when we're about to exit with
non-zero.
That commit says, on the topic of the dir_clear() API and UNLEAK():
[...]two of them clearly thought about leaks since they had an
UNLEAK(dir) directive, which to me suggests that the method to
free the data was too unclear.
I think that 0e5bba53af7 (add UNLEAK annotation for reducing leak
false positives, 2017-09-08) which added the UNLEAK() makes it clear
that that wasn't the case, rather it was the desire to avoid the
complexity of freeing the memory at the end of the program.
This does add a bit of complexity, but I think it's worth it to just
fix these leaks when it's easy in built-ins. It allows them to serve
as canaries for underlying APIs that shouldn't be leaking, it
encourages us to make those freeing APIs nicer for all their users,
and it prevents other leaking regressions by being able to mark the
entire test as TEST_PASSES_SANITIZE_LEAK=true.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More code paths that use the hack to add submodule's object
database to the set of alternate object store have been cleaned up.
* jt/add-submodule-odb-clean-up:
revision: remove "submodule" from opt struct
repository: support unabsorbed in repo_submodule_init
submodule: remove unnecessary unabsorbed fallback
|
|
Usage description for -X and -z options use descriptive instead of
imperative mood. Edit it for consistency with other options.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for a subsequent commit that migrates code using
add_submodule_odb() to repo_submodule_init(), teach
repo_submodule_init() to support submodules with unabsorbed gitdirs.
(See the documentation for "git submodule absorbgitdirs" for more
information about absorbed and unabsorbed gitdirs.)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the dir_init() function and replace it with a DIR_INIT
macro. In many cases in the codebase we need to initialize things with
a function for good reasons, e.g. needing to call another function on
initialization. The "dir_init()" function was not one such case, and
could trivially be replaced with a more idiomatic macro initialization
pattern.
The only place where we made use of its use of memset() was in
dir_clear() itself, which resets the contents of an an existing struct
pointer. Let's use the new "memcpy() a 'blank' struct on the stack"
idiom to do that reset.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git clean" and "git ls-files -i" had confusion around working on
or showing ignored paths inside an ignored directory, which has
been corrected.
* en/dir-traversal:
dir: introduce readdir_skip_dot_and_dotdot() helper
dir: update stale description of treat_directory()
dir: traverse into untracked directories if they may have ignored subfiles
dir: avoid unnecessary traversal into ignored directory
t3001, t7300: add testcase showcasing missed directory traversal
t7300: add testcase showing unnecessary traversal into ignored directory
ls-files: error out on -i unless -o or -c are specified
dir: report number of visited directories and paths with trace2
dir: convert trace calls to trace2 equivalents
|
|
ls-files --ignored can be used together with either --others or
--cached. After being perplexed for a bit and digging in to the code, I
assumed that ls-files -i was just broken and not printing anything and
I had a nice patch ready to submit when I finally realized that -i can be
used with --cached to find tracked ignores.
While that was a mistake on my part, and a careful reading of the
documentation could have made this more clear, I suspect this is an
error others are likely to make as well. In fact, of two uses in our
testsuite, I believe one of the two did make this error. In t1306.13,
there are NO tracked files, and all the excludes built up and used in
that test and in previous tests thus have to be about untracked files.
However, since they were looking for an empty result, the mistake went
unnoticed as their erroneous command also just happened to give an empty
answer.
-i will most the time be used with -o, which would suggest we could just
make -i imply -o in the absence of either a -o or -c, but that would be
a backward incompatible break. Instead, let's just flag -i without
either a -o or -c as an error, and update the two relevant testcases to
specify their intent.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
