| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In "config.c" we host both the business logic to read and write config
files as well as the logic to parse specific Git-related variables. On
the one hand this is mixing concerns, but even more importantly it means
that we cannot easily remove the dependency on `the_repository` in our
config parsing logic.
Move the logic into "environment.c". This file is a grab bag of all
kinds of global state already, so it is quite a good fit. Furthermore,
it also hosts most of the global variables that we're parsing the config
values into, making this an even better fit.
Note that there is one hidden change: in `parse_fsync_components()` we
use an `int` to iterate through `ARRAY_SIZE(fsync_component_names)`. But
as -Wsign-compare warnings are enabled in this file this causes a
compiler warning. The issue is fixed by using a `size_t` instead.
This change allows us to drop the `USE_THE_REPOSITORY_VARIABLE`
declaration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config()`. All callsites
are adjusted so that they use `repo_config(the_repository, ...)`
instead. While some callsites might already have a repository available,
this mechanical conversion is the exact same as the current situation
and thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename `has_object()` to `odb_has_object()` to match other functions
related to the object database and our modern coding guidelines.
Introduce a compatibility wrapper so that any in-flight topics will
continue to compile.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the preceding commits we have renamed the structures contained in
"object-store.h" to `struct object_database` and `struct odb_backend`.
As such, the code files "object-store.{c,h}" are confusingly named now.
Rename them to "odb.{c,h}" accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the comment of `repo_has_object_file()` and its `_with_flags()`
variant tells us, these functions are considered to be deprecated in
favor of `has_object()`. There are a couple of slight benefits in favor
of the replacement:
- The new function has a short-and-sweet name.
- More explicit defaults: `has_object()` doesn't fetch missing objects
via promisor remotes, and neither does it reload packfiles if an
object wasn't found by default. This ensures that it becomes
immediately obvious when a simple object existence check may result
in expensive actions.
Most importantly though, it is confusing that we have two sets of
functions that ultimately do the same thing, but with different
defaults.
Start sunsetting `repo_has_object_file()` and its `_with_flags()`
sibling by replacing all callsites with `has_object()`:
- `repo_has_object_file(...)` is equivalent to
`has_object(..., HAS_OBJECT_RECHECK_PACKED | HAS_OBJECT_FETCH_PROMISOR)`.
- `repo_has_object_file_with_flags(..., OBJECT_INFO_QUICK | OBJECT_INFO_SKIP_FETCH_OBJECT)`
is equivalent to `has_object(..., 0)`.
- `repo_has_object_file_with_flags(..., OBJECT_INFO_SKIP_FETCH_OBJECT)`
is equivalent to `has_object(..., HAS_OBJECT_RECHECK_PACKED)`.
- `repo_has_object_file_with_flags(..., OBJECT_INFO_QUICK)`
is equivalent to `has_object(..., HAS_OBJECT_FETCH_PROMISOR)`.
The replacements should be functionally equivalent.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "object-store-ll.h" header has been introduced to keep transitive
header dependendcies and compile times at bay. Now that we have created
a new "object-store.c" file though we can easily move the last remaining
additional bit of "object-store.h", the `odb_path_map`, out of the
header.
Do so. As the "object-store.h" header is now equivalent to its low-level
alternative we drop the latter and inline it into the former.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of including USE_THE_REPOSITORY_VARIABLE by default on every
builtin, remove it from builtin.h and add it to all the builtins that
include builtin.h (by definition, that means all builtins/*.c).
Also, remove the include statement for repository.h since it gets
brought in through builtin.h.
The next step will be to migrate each builtin
from having to use the_repository.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to reduce the usage of the global the_repository, add a
parameter to builtin functions that will get passed a repository
variable.
This commit uses UNUSED on most of the builtin functions, as subsequent
commits will modify the actual builtins to pass the repository parameter
down.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The refs API has been taught to give symref target information to
the users of ref iterators, allowing for-each-ref and friends to
avoid an extra ref_resolve_* API call per a symbolic ref.
* jc/refs-symref-referent:
ref-filter: populate symref from iterator
refs: add referent to each_ref_fn
refs: keep track of unresolved reference value in iterators
|
|
Add a parameter to each_ref_fn so that callers to the ref APIs
that use this function as a callback can have acess to the
unresolved value of a symbolic ref.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few descriptions in "git show-ref -h" have been clarified.
* as/show-ref-option-help-update:
show-ref: improve short help messages of options
|
|
Trivial change to indicate that branches and tags are real options
that can be used combined to get more information. This helps with
linting translations and prompting the user that the terms represent
options.
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "--heads" option of "ls-remote" and "show-ref" has been been
deprecated; "--branches" replaces "--heads".
* jc/heads-are-branches:
show-ref: introduce --branches and deprecate --heads
ls-remote: introduce --branches and deprecate --heads
refs: call branches branches
|
|
We call the tips of branches "heads", but this command calls the
option to show only branches "--heads", which confuses the branches
themselves and the tips of branches.
Straighten the terminology by introducing "--branches" option that
limits the output to branches, and deprecate "--heads" option used
that way.
We do not plan to remove "--heads" or "-h" yet; we may want to do so
at Git 3.0, in which case, we may need to start advertising upcoming
removal with an extra warning when they are used.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both `peel_object()` and `peel_iterated_oid()` implicitly rely on
`the_repository` to look up objects. Despite the fact that we want to
get rid of `the_repository`, it also leads to some restrictions in our
ref iterators when trying to retrieve the peeled value for a repository
other than `the_repository`.
Refactor these functions such that both take a repository as argument
and remove the now-unnecessary restrictions.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the rules that rewrite callers of "refs" interfaces to explicitly
pass `struct ref_store`. The resulting patch has been applied with the
`--whitespace=fix` option.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `for_each_fullref_in()` function is supposedly the ref-store-less
equivalent of `refs_for_each_fullref_in()`, but the latter has gained a
new parameter `exclude_patterns` over time. Bring these two functions
back in sync again by adding the parameter to the former function, as
well.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git show-ref --verify" is useful for scripts that want to look up a
fully qualified refname without falling back to the DWIM rules used by
"git rev-parse" rules when the ref does not exist. Currently it will
only accept "HEAD" or a refname beginning with "refs/". Running
git show-ref --verify CHERRY_PICK_HEAD
will always result in
fatal: 'CHERRY_PICK_HEAD' - not a valid ref
even when CHERRY_PICK_HEAD exists. By calling refname_is_safe() instead
of comparing the refname to "HEAD" we can accept all one-level refs that
contain only uppercase ascii letters and underscores.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update to a new feature recently added, "git show-ref --exists".
* tc/show-ref-exists-fix:
builtin/show-ref: treat directory as non-existing in --exists
|
|
9080a7f178 (builtin/show-ref: add new mode to check for reference
existence, 2023-10-31) added the option --exists to git-show-ref(1).
When you use this option against a ref that doesn't exist, but it is
a parent directory of an existing ref, you get the following error:
$ git show-ref --exists refs/heads
error: failed to look up reference: Is a directory
when the ref-files backend is in use. To be more clear to user,
hide the error about having found a directory. What matters to the
user is that the named ref does not exist. Instead, print the same
error as when the ref was not found:
error: reference does not exist
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove unused header "#include".
* en/header-cleanup:
treewide: remove unnecessary includes in source files
treewide: add direct includes currently only pulled in transitively
trace2/tr2_tls.h: remove unnecessary include
submodule-config.h: remove unnecessary include
pkt-line.h: remove unnecessary include
line-log.h: remove unnecessary include
http.h: remove unnecessary include
fsmonitor--daemon.h: remove unnecessary includes
blame.h: remove unnecessary includes
archive.h: remove unnecessary include
treewide: remove unnecessary includes in source files
treewide: remove unnecessary includes from header files
|
|
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the standard message for reporting the use of multiple mutually
exclusive options by calling die_for_incompatible_opt3() instead of
rolling our own. This has the benefits of showing only the actually
given options, reducing the number of strings to translate and making
the UI slightly more consistent.
Adjust the test to no longer insist on a specific order of the
reported options, as this implementation detail does not affect the
usefulness of the error message.
Reported-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While we have multiple ways to show the value of a given reference, we
do not have any way to check whether a reference exists at all. While
commands like git-rev-parse(1) or git-show-ref(1) can be used to check
for reference existence in case the reference resolves to something
sane, neither of them can be used to check for existence in some other
scenarios where the reference does not resolve cleanly:
- References which have an invalid name cannot be resolved.
- References to nonexistent objects cannot be resolved.
- Dangling symrefs can be resolved via git-symbolic-ref(1), but this
requires the caller to special case existence checks depending on
whether or not a reference is symbolic or direct.
Furthermore, git-rev-list(1) and other commands do not let the caller
distinguish easily between an actually missing reference and a generic
error.
Taken together, this seems like sufficient motivation to introduce a
separate plumbing command to explicitly check for the existence of a
reference without trying to resolve its contents.
This new command comes in the form of `git show-ref --exists`. This
new mode will exit successfully when the reference exists, with a
specific exit code of 2 when it does not exist, or with 1 when there
has been a generic error.
Note that the only way to properly implement this command is by using
the internal `refs_read_raw_ref()` function. While the public function
`refs_resolve_ref_unsafe()` can be made to behave in the same way by
passing various flags, it does not provide any way to obtain the errno
with which the reference backend failed when reading the reference. As
such, it becomes impossible for us to distinguish generic errors from
the explicit case where the reference wasn't found.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The synopsis treats the `--verify` and the implicit mode the same. They
are slightly different though:
- They accept different sets of flags.
- The implicit mode accepts patterns while the `--verify` mode
accepts references.
Split up the synopsis for these two modes such that we can disambiguate
those differences.
While at it, drop "--quiet" from the pattern mode's synopsis. It does
not make a lot of sense to list patterns, but squelch the listing output
itself. The description for "--quiet" is adapted accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git-show-ref(1) command has three different modes, of which one is
implicit and the other two can be chosen explicitly by passing a flag.
But while these modes are standalone and cause us to execute completely
separate code paths, we gladly accept the case where a user asks for
both `--exclude-existing` and `--verify` at the same time even though it
is not obvious what will happen. Spoiler: we ignore `--verify` and
execute the `--exclude-existing` mode.
Let's explicitly detect this invalid usage and die in case both modes
were requested.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The patterns subcommand is the last command that still uses global
variables to track its options. Convert it to use a structure instead
with the same motivation as preceding commits.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `show_one()` function implicitly receives a bunch of options which
are tracked via global variables. This makes it hard to see which
subcommands of git-show-ref(1) actually make use of these options.
Introduce a `show_one_options` structure that gets passed down to this
function. This allows us to get rid of more global state and makes it
more explicit which subcommands use those options.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When passing patterns to git-show-ref(1) we're checking whether any
reference matches -- if none do, we indicate this condition via an
unsuccessful exit code.
We're using a global variable to count these matches, which is required
because the counter is getting incremented in a callback function. But
now that we have the `struct show_ref_data` in place, we can get rid of
the global variable and put the counter in there instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's not immediately obvious options which options are applicable to
what subcommand in git-show-ref(1) because all options exist as global
state. This can easily cause confusion for the reader.
Refactor options for the `--exclude-existing` subcommand to be contained
in a separate structure. This structure is stored on the stack and
passed down as required. Consequently, it clearly delimits the scope of
those options and requires the reader to worry less about global state.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When passing patterns to `git show-ref` we have some code that will
cause us to die if `verify && !quiet` is true. But because `verify`
indicates a different subcommand of git-show-ref(1) that causes us to
execute `cmd_show_ref__verify()` and not `cmd_show_ref__patterns()`, the
condition cannot ever be true.
Let's remove this dead code.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a leaking string buffer in `git show-ref --exclude-existing`. While
the buffer is technically not leaking because its variable is declared
as static, there is no inherent reason why it should be.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While not immediately obvious, git-show-ref(1) actually implements three
different subcommands:
- `git show-ref <patterns>` can be used to list references that
match a specific pattern.
- `git show-ref --verify <refs>` can be used to list references.
These are _not_ patterns.
- `git show-ref --exclude-existing` can be used as a filter that
reads references from standard input, performing some conversions
on each of them.
Let's make this more explicit in the code by splitting up the three
subcommands into separate functions. This also allows us to address the
confusingly named `patterns` variable, which may hold either patterns or
reference names.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `pattern` variable is a global variable that tracks either the
reference names (not patterns!) for the `--verify` mode or the patterns
for the non-verify mode. This is a bit confusing due to the slightly
different meanings.
Convert the variable to be local. While this does not yet fix the double
meaning of the variable, this change allows us to address it in a
subsequent patch more easily by explicitly splitting up the different
subcommands of git-show-ref(1).
Note that we introduce a `struct show_ref_data` to pass the patterns to
`show_ref()`. While this is overengineered now, we will extend this
structure in a subsequent patch.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The vast majority of files including object-store.h did not need dir.h
nor khash.h. Split the header into two files, and let most just depend
upon object-store-ll.h, while letting the two callers that need it
depend on the full object-store.h.
After this patch:
$ git grep -h include..object-store | sort | uniq -c
2 #include "object-store.h"
129 #include "object-store-ll.h"
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
en/header-split-cache-h
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
|
|
Apply the part of "the_repository.pending.cocci" pertaining to
"object-store.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the part of "the_repository.pending.cocci" pertaining to
"cache.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The short-help text shown by "git cmd -h" and the synopsis text
shown at the beginning of "git help cmd" have been made more
consistent.
* ab/doc-synopsis-and-cmd-usage: (34 commits)
tests: assert consistent whitespace in -h output
tests: start asserting that *.txt SYNOPSIS matches -h output
doc txt & -h consistency: make "worktree" consistent
worktree: define subcommand -h in terms of command -h
reflog doc: list real subcommands up-front
doc txt & -h consistency: make "commit" consistent
doc txt & -h consistency: make "diff-tree" consistent
doc txt & -h consistency: use "[<label>...]" for "zero or more"
doc txt & -h consistency: make "annotate" consistent
doc txt & -h consistency: make "stash" consistent
doc txt & -h consistency: add missing options
doc txt & -h consistency: use "git foo" form, not "git-foo"
doc txt & -h consistency: make "bundle" consistent
doc txt & -h consistency: make "read-tree" consistent
doc txt & -h consistency: make "rerere" consistent
doc txt & -h consistency: add missing options and labels
doc txt & -h consistency: make output order consistent
doc txt & -h consistency: add or fix optional "--" syntax
doc txt & -h consistency: fix mismatching labels
doc SYNOPSIS & -h: use "-" to separate words in labels, not "_"
...
|
|
Change the documentation and -h output for those built-in commands
where both the -h output and *.txt were lacking in word-wrapping.
There are many more built-ins that could use this treatment, this
change is narrowed to those where this whitespace change is needed to
make the -h and *.txt consistent in the end.
In the case of "Documentation/git-hash-object.txt" and
"builtin/hash-object.c" this is not a "doc txt & -h consistency"
change, as we're changing both versions, doing so here makes a
subsequent change smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As reported in [1] the "UNUSED(var)" macro introduced in
2174b8c75de (Merge branch 'jk/unused-annotation' into next,
2022-08-24) breaks coccinelle's parsing of our sources in files where
it occurs.
Let's instead partially go with the approach suggested in [2] of
making this not take an argument. As noted in [1] "coccinelle" will
ignore such tokens in argument lists that it doesn't know about, and
it's less of a surprise to syntax highlighters.
This undoes the "help us notice when a parameter marked as unused is
actually use" part of 9b240347543 (git-compat-util: add UNUSED macro,
2022-08-19), a subsequent commit will further tweak the macro to
implement a replacement for that functionality.
1. https://lore.kernel.org/git/220825.86ilmg4mil.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/220819.868rnk54ju.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Functions used with for_each_ref(), etc, need to conform to the
each_ref_fn interface. But most of them don't need every parameter;
let's annotate the unused ones to quiet -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When `show-ref` is combined with the `--heads` or `--tags` options, it
can avoid iterating parts of a repository's references that it doesn't
care about.
But it doesn't take advantage of this potential optimization. When this
command was introduced back in 358ddb62cf (Add "git show-ref" builtin
command, 2006-09-15), `for_each_ref_in()` did exist. But since most
repositories don't have many (any?) references that aren't branches or
tags already, this makes little difference in practice.
Though for repositories with a large imbalance of branches and tags (or,
more likely in the case of server operators, many hidden references),
this can make quite a difference. Take, for example, a repository with
500,000 "hidden" references (all of the form "refs/__hidden__/N"), and
a single branch:
git commit --allow-empty -m "base" &&
seq 1 500000 | sed 's,\(.*\),create refs/__hidden__/\1 HEAD,' |
git update-ref --stdin &&
git pack-refs --all
Outputting the existence of that single branch currently takes on the
order of ~50ms on my machine. The vast majority of this time is wasted
iterating through references that we know we're going to discard.
Instead, teach `show-ref` that it can iterate just "refs/heads" and/or
"refs/tags" when given `--heads` and/or `--tags`, respectively. A few
small interesting things to note:
- When given either option, we can avoid the general-purpose
for_each_ref() call altogether, since we know that it won't give us
any references that we wouldn't filter out already.
- We can make two separate calls to `for_each_fullref_in()` (and
avoid, say, the more specialized `for_each_fullref_in_prefixes()`,
since we know that the set of references enumerated by each is
disjoint, so we'll never see the same reference appear in both
calls.
- We have to use the "fullref" variant (instead of just
`for_each_branch_ref()` and `for_each_tag_ref()`), since we expect
fully-qualified reference names to appear in `show-ref`'s output.
When either of `heads_only` or `tags_only` is set, we can eliminate the
strcmp() calls in `builtin/show-ref.c::show_ref()` altogether, since we
know that `show_ref()` will never see a non-branch or tag reference.
Unfortunately, we can't use `for_each_fullref_in_prefixes()` to enhance
`show-ref`'s pattern matching, since `show-ref` patterns match on the
_suffix_ (e.g., the pattern "foo" shows "refs/heads/foo",
"refs/tags/foo", and etc, not "foo/*").
Nonetheless, in our synthetic example above, this provides a significant
speed-up ("git" is roughly v2.36, "git.compile" is this patch):
$ hyperfine -N 'git show-ref --heads' 'git.compile show-ref --heads'
Benchmark 1: git show-ref --heads
Time (mean ± σ): 49.9 ms ± 6.2 ms [User: 45.6 ms, System: 4.1 ms]
Range (min … max): 46.1 ms … 73.6 ms 43 runs
Benchmark 2: git.compile show-ref --heads
Time (mean ± σ): 2.8 ms ± 0.4 ms [User: 1.4 ms, System: 1.2 ms]
Range (min … max): 1.3 ms … 5.6 ms 957 runs
Summary
'git.compile show-ref --heads' ran
18.03 ± 3.38 times faster than 'git show-ref --heads'
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The peel_ref() interface is confusing and error-prone:
- it's typically used by ref iteration callbacks that have both a
refname and oid. But since they pass only the refname, we may load
the ref value from the filesystem again. This is inefficient, but
also means we are open to a race if somebody simultaneously updates
the ref. E.g., this:
int some_ref_cb(const char *refname, const struct object_id *oid, ...)
{
if (!peel_ref(refname, &peeled))
printf("%s peels to %s",
oid_to_hex(oid), oid_to_hex(&peeled);
}
could print nonsense. It is correct to say "refname peels to..."
(you may see the "before" value or the "after" value, either of
which is consistent), but mentioning both oids may be mixing
before/after values.
Worse, whether this is possible depends on whether the optimization
to read from the current iterator value kicks in. So it is actually
not possible with:
for_each_ref(some_ref_cb);
but it _is_ possible with:
head_ref(some_ref_cb);
which does not use the iterator mechanism (though in practice, HEAD
should never peel to anything, so this may not be triggerable).
- it must take a fully-qualified refname for the read_ref_full() code
path to work. Yet we routinely pass it partial refnames from
callbacks to for_each_tag_ref(), etc. This happens to work when
iterating because there we do not call read_ref_full() at all, and
only use the passed refname to check if it is the same as the
iterator. But the requirements for the function parameters are quite
unclear.
Instead of taking a refname, let's instead take an oid. That fixes both
problems. It's a little funny for a "ref" function not to involve refs
at all. The key thing is that it's optimizing under the hood based on
having access to the ref iterator. So let's change the name to make it
clear why you'd want this function versus just peel_object().
There are two other directions I considered but rejected:
- we could pass the peel information into the each_ref_fn callback.
However, we don't know if the caller actually wants it or not. For
packed-refs, providing it is essentially free. But for loose refs,
we actually have to peel the object, which would be wasteful in most
cases. We could likewise pass in a flag to the callback indicating
whether the peeled information is known, but that complicates those
callbacks, as they then have to decide whether to manually peel
themselves. Plus it requires changing the interface of every
callback, whether they care about peeling or not, and there are many
of them.
- we could make a function to return the peeled value of the current
iterated ref (computing it if necessary), and BUG() otherwise. I.e.:
int peel_current_iterated_ref(struct object_id *out);
Each of the current callers is an each_ref_fn callback, so they'd
mostly be happy. But:
- we use those callbacks with functions like head_ref(), which do
not use the iteration code. So we'd need to handle the fallback
case there, anyway.
- it's possible that a caller would want to call into generic code
that sometimes is used during iteration and sometimes not. This
encapsulates the logic to do the fast thing when possible, and
fallback when necessary.
The implementation is mostly obvious, but I want to call out a few
things in the patch:
- the test-tool coverage for peel_ref() is now meaningless, as it all
collapses to a single peel_object() call (arguably they were pretty
uninteresting before; the tricky part of that function is the
fast-path we see during iteration, but these calls didn't trigger
that). I've just dropped it entirely, though note that some other
tests relied on the tags we created; I've moved that creation to the
tests where it matters.
- we no longer need to take a ref_store parameter, since we'd never
look up a ref now. We do still rely on a global "current iterator"
variable which _could_ be kept per-ref-store. But in practice this
is only useful if there are multiple recursive iterations, at which
point the more appropriate solution is probably a stack of
iterators. No caller used the actual ref-store parameter anyway
(they all call the wrapper that passes the_repository).
- the original only kicked in the optimization when the "refname"
pointer matched (i.e., not string comparison). We do likewise with
the "oid" parameter here, but fall back to doing an actual oideq()
call. This in theory lets us kick in the optimization more often,
though in practice no current caller cares. It should never be
wrong, though (peeling is a property of an object, so two refs
pointing to the same object would peel identically).
- the original took care not to touch the peeled out-parameter unless
we found something to put in it. But no caller cares about this, and
anyway, it is enforced by peel_object() itself (and even in the
optimized iterator case, that's where we eventually end up). We can
shorten the code and avoid an extra copy by just passing the
out-parameter through the stack.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On a filesystem like HFS+, the names of the refs stored as filesystem
entities may become different from what the end-user expects, just
like files in the working tree get "renamed". Work around the
mismatch by paying attention to the core.precomposeUnicode
configuration.
* en/unicode-in-refnames:
Honor core.precomposeUnicode in more places
|
