| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
1. '--exclude=' option to 'git log' and 'git shortlog' are missing. Add the
option to __git_log_shortlog_options.
2. The `--committer` option in `git log` requires a pattern, such as
`--committer=ba`, but in `git shortlog`, specifying a pattern results in
an error: “error: option `committer' takes no value.” Handle them as
separate options for completion rather than a shared one.
Signed-off-by: KIYOTA Fumiya <aimluck.kiyota@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The shell completion scripts in "contrib/completion" are being tested,
but none of our build systems support installing them. This is somewhat
confusing for Meson, where users can explicitly enable building these
scripts via `-Dcontrib=completion`. This option only controlls whether
the completions are built and tested against, where "building" is a bit
of an euphemism for "copying them into the build directory".
Teach both our Makefile and Meson to install our Bash completion script.
For now, this is the only completion script that we're installing given
that Bash completions "just work" with a canonical well-known location
nowadays. Other completion scripts, like for example the one for zsh,
don't have a well-known location and/or require extra steps by the user
to make them available. As such, we skip installing these scripts for
now, but we may do so in the future if we ever figure out a proper way
to do this.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, some calls to for-each-ref passed fixed numbers of path
components to strip from refs, assuming that remote names had no slashes
in them. This made completions like:
git push github/dseomn :com<Tab>
Result in:
git push github/dseomn :dseomn/completion-remote-slash
With this patch, it instead results in:
git push github/dseomn :completion-remote-slash
Signed-off-by: David Mandelberg <david@mandelberg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A follow-up commit will use this with for-each-ref to strip the right
number of path components from refnames.
Signed-off-by: David Mandelberg <david@mandelberg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Completion script updates for zsh
* dk/zsh-config-completion-fix:
completion: repair config completion for Zsh
|
|
Commit 1e0ee4087e (completion: add and use
__git_compute_first_level_config_vars_for_section, 2024-02-10) uses an
indirect variable syntax that is only valid for Bash, but the Zsh
completion code relies on the Bash completion code to function. Zsh
supports a different indirect variable expansion using ${(P)var}, but in
`emulate ksh` mode does not support Bash's ${!var}.
This manifests as completing strange config options like
"__git_first_level_config_vars_for_section_remote" as a choice for the
command line
git config set remote.
Using Zsh's C-x ? _complete_debug widget with the cursor at the end of
that command line captures a trace, in which we see (some details
elided):
+__git_complete_config_variable_name:7> __git_compute_first_level_config_vars_for_section remote
+__git_compute_first_level_config_vars_for_section:7> local section=remote
+__git_compute_first_level_config_vars_for_section:7> __git_compute_config_vars
+__git_compute_config_vars:7> test -n $'add.ignoreErrors\nadvice.addEmbeddedRepo\nadvice.addEmptyPathspec\nadvice.addIgnoredFile[…]'
+__git_compute_first_level_config_vars_for_section:7> local this_section=__git_first_level_config_vars_for_section_remote
+__git_compute_first_level_config_vars_for_section:7> test -n __git_first_level_config_vars_for_section_remote
+__git_complete_config_variable_name:7> local this_section=__git_first_level_config_vars_for_section_remote
+__git_complete_config_variable_name:7> __gitcomp_nl_append __git_first_level_config_vars_for_section_remote remote. '' ' '
+__gitcomp_nl_append:7> __gitcomp_nl __git_first_level_config_vars_for_section_remote remote. '' ' '
+__gitcomp_nl:7> emulate -L zsh
+__gitcomp_nl:7> compset -P '*[=:]'
+__gitcomp_nl:7> compadd -Q -S ' ' -p remote. -- __git_first_level_config_vars_for_section_remote
We perform the test for __git_compute_config_vars correctly, but the
${!this_section} references are not expanded as expected.
Instead, portably expand indirect references through the new
__git_indirect. Contrary to some versions you might find online [1],
this version avoids echo non-portabilities [2] [3] and correctly quotes
the indirect expansion after eval (so that the result is not split or
globbed before being handed to printf).
[1]: https://unix.stackexchange.com/a/41409/301073
[2]: https://askubuntu.com/questions/715765/mysterious-behavior-of-echo-command#comment1056038_715769
[3]: https://mywiki.wooledge.org/CatEchoLs
The following demo program demonstrates how this works:
b=1
indirect() {
eval printf '%s' "\"\$$1\""
}
f() {
# Comment this out to see that it works for globals, too. Or, use
# a value with spaces like '2 3 4' to see how it handles those.
local b=2
local a=b
test -n "$(indirect $a)" && echo nice
}
f
When placed in a file "demo", then both
bash -x demo
and
zsh -xc 'emulate ksh -c ". ./demo"' |& tail
provide traces showing that "$(indirect $a)" produces 2 (or 1, with the
global, or "2 3 4" as a single string, etc.).
Signed-off-by: D. Ben Knoble <ben.knoble+github@gmail.com>
Acked-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Build procedure update plus introduction of Meson based builds.
* ps/build: (24 commits)
Introduce support for the Meson build system
Documentation: add comparison of build systems
t: allow overriding build dir
t: better support for out-of-tree builds
Documentation: extract script to generate a list of mergetools
Documentation: teach "cmd-list.perl" about out-of-tree builds
Documentation: allow sourcing generated includes from separate dir
Makefile: simplify building of templates
Makefile: write absolute program path into bin-wrappers
Makefile: allow "bin-wrappers/" directory to exist
Makefile: refactor generators to be PWD-independent
Makefile: extract script to generate gitweb.js
Makefile: extract script to generate gitweb.cgi
Makefile: extract script to massage Python scripts
Makefile: extract script to massage Shell scripts
Makefile: use "generate-perl.sh" to massage Perl library
Makefile: extract script to massage Perl scripts
Makefile: consistently use PERL_PATH
Makefile: generate doc versions via GIT-VERSION-GEN
Makefile: generate "git.rc" via GIT-VERSION-GEN
...
|
|
Introduce support for the Meson build system, a "modern" meta build
system that supports many different platforms, including Linux, macOS,
Windows and BSDs. Meson supports different backends, including Ninja,
Xcode and Microsoft Visual Studio. Several common IDEs provide an
integration with it.
The biggest contender compared to Meson is probably CMake as outlined in
our "Documentation/technical/build-systems.txt" file. Based on my own
personal experience from working with both build systems extensively I
strongly favor Meson over CMake. In my opinion, it feels significantly
easier to use with a syntax that feels more like a "real" programming
language. The second big reason is that Meson supports Rust natively,
which may prove to be important given that the project may pick up Rust
as another language eventually.
Using Meson is rather straight-forward. An example:
```
# Meson uses out-of-tree builds. You can set up multiple build
# directories, how you name them is completely up to you.
$ mkdir build
$ cd build
$ meson setup .. -Dprefix=/tmp/git-installation
# Build the project. This also provides several other targets like
e.g. `install` or `test`.
$ ninja
# Meson has been wired up to support execution of our test suites.
# Both our unit tests and our integration tests are supported.
# Running `meson test` without any arguments will execute all tests,
# but the syntax supports globbing to select only some tests.
$ meson test 't-*'
# Execute single test interactively to allow for debugging.
$ meson test 't0000-*' --interactive --test-args=-ix
```
The build instructions have been successfully tested on the following
systems, tests are passing:
- Apple macOS 10.15.
- FreeBSD 14.1.
- NixOS 24.11.
- OpenBSD 7.6.
- Ubuntu 24.04.
- Windows 10 with Cygwin.
- Windows 10 with MinGW64, except for t9700, which is also broken with
our Makefile.
- Windows 10 with Visual Studio 2022 toolchain, using the Native Tools
Command Prompt with `meson setup --vsenv`. Tests pass, except for
t9700.
- Windows 10 with Visual Studio 2022 solution, using the Native Tools
Command Prompt with `meson setup --backend vs2022`. Tests pass,
except for t9700.
- Windows 10 with VS Code, using the Meson plug-in.
It is expected that there will still be rough edges in the current
version. If this patch lands the expectation is that it will coexist
with our other build systems for a while. Like this, distributions can
slowly migrate over to Meson and report any findings they have to us
such that we can continue to iterate. A potential cutoff date for other
build systems may be Git 3.0.
Some notes:
- The installed distribution is structured somewhat differently than
how it used to be the case. All of our binaries are installed into
`$libexec/git-core`, while all binaries part of `$bindir` are now
symbolic links pointing to the former. This rule is consistent in
itself and thus easier to reason about.
- We do not install dashed binaries into `$libexec/git-core` anymore,
so there won't e.g. be a symlink for git-add(1). These are not
required by modern Git and there isn't really much of a use case for
those anymore. By not installing those symlinks we thus start the
deprecation of this layout.
- We're targeting Meson 1.3.0, which has been released relatively
recently November 2023. The only feature we use from that version is
`fs.relative_to()`, which we could replace if necessary. If so, we
could start to target Meson 1.0.0 and newer, released in December
2022.
- The whole build instructions count around 3300 lines, half of which
is listing all of our code and test files. Our Makefiles are around
5000 lines, autoconf adds another 1300 lines. CMake in comparison
has only 1200 linescode, but it avoids listing individual files and
does not wire up auto-configuration as extensively as the Meson
instructions do.
- We bundle a set of subproject wrappers for curl, expat, openssl,
pcre2 and zlib. This allows developers to build Git without these
dependencies preinstalled, and Meson will fetch and build them
automatically. This is especially helpful on Windows.
Helped-by: Eli Schwartz <eschwartz@gentoo.org>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix typos via codespell.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using colors, the shell needs to identify 0-width substrings
in PS1 - such as color escape sequences - when calculating the
on-screen width of the prompt.
Until now, we used the form %F{<color>} in zsh - which it knows is
0-width, or otherwise use standard SGR esc sequences wrapped between
byte values 1 and 2 (SOH, STX) as 0-width start/end markers, which
bash/readline identify as such.
But now that more shells are supported, the standard SGR sequences
typically work, but the SOH/STX markers might not be identified.
This commit adds support for vars GIT_PS1_COLOR_{PRE,POST} which
set custom 0-width markers or disable the markers.
Signed-off-by: Avi Halachmi (:avih) <avihpit@yahoo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With one big exception, git-prompt.sh should now be both almost posix
compliant, and also compatible with most (posix-ish) shells.
That exception is the use of "local" vars in functions, which happens
extensively in the current code, and is not simple to replace with
posix compliant code (but also not impossible).
Luckily, almost all shells support "local" as used by the current
code, with the notable exception of ksh93[u+m], but also the Schily
minimal posix sh (pbosh), and yash in posix mode.
See assessment below that "local" is likely the only blocker in those.
So except mainly ksh93, git-prompt.sh now works in most shells:
- bash, zsh, dash since at least 0.5.8, free/net bsd sh, busybox-ash,
mksh, openbsd sh, pdksh(!), Schily extended Bourne sh (bosh), yash.
which is quite nice.
As an anecdote, replacing the 1st line in __git_ps1() (local exit=$?)
with these 2 makes it work in all tested shells, even without "local":
# handles only 0/1 args for simplicity. needs +5 LOC for any $#
__git_e=$?; local exit="$__git_e" 2>/dev/null ||
{(eval 'local() { export "$@"; }'; __git_ps1 "$@"); return "$__git_e"; }
Explanation:
If the shell doesn't have the command "local", define our own
function "local" which instead does plain (global) assignents.
Then use __git_ps1 in a subshell to not clober the caller's vars.
This happens to work because currently there are no name conflicts
(shadow) at the code, initial value is not assumed (i.e. always
doing either 'local x=...' or 'local x;... x=...'), and assigned
initial values are quoted (local x="$y"), preventing word split and
glob expansion (i.e. assignment context is not assumed).
The last two (always init, quote values) seem to be enough to use
"local" portably if supported, and otherwise shells indeed differ.
Uses "eval", else shells with "local" may reject it during parsing.
We don't need "export", but it's smaller than writing our own loop.
While cute, this approach is not really sustainable because all the
vars become global, which is hard to maintain without conflicts
(but hey, it currently has no conflicts - without even trying...).
However, regardless of being an anecdote, it provides some support to
the assessment that "local" is the only blocker in those shells.
Signed-off-by: Avi Halachmi (:avih) <avihpit@yahoo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
$'...' is new in POSIX (2024), and some shells support it in recent
versions, while others have had it for decades (bash, zsh, ksh93).
However, there are still enough shells which don't support it, and
it's cheap to use an alternative form which works in all shells,
so let's do that instead of dismissing it as "it's compliant".
It was agreed to use one form rather than $'...' where supported and
fallback otherwise.
shells where $'...' works:
- bash, zsh, ksh93, mksh, busybox-ash, dash master, free/net bsd sh.
shells where it doesn't work, but the new fallback works:
- all dash releases (up to 0.5.12), older versions of free/net bsd sh,
openbsd sh, pdksh, all Schily Bourne sh variants, yash.
Signed-off-by: Avi Halachmi (:avih) <avihpit@yahoo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The issues which this commit fixes are unlikely to be broken
in real life, but the fixes improve correctness, and would prevent
bugs in some uncommon cases, such as weird IFS values.
Listing some portability guidelines here for future reference.
I'm leaving it to someone else to decide whether to include
it in the file itself, place it as a new file, or not.
---------
The command "local" is non standard, but is allowed in this file:
- Quote initialization if it can expand (local x="$y"). See below.
- Don't assume initial value after "local x". Either initialize it
(local x=..), or set before first use (local x;.. x=..; <use $x>).
(between shells, "local x" can unset x, or inherit it, or do x= )
Other non-standard features beyond "local" are to be avoided.
Use the standard "test" - [...] instead of non-standard [[...]] .
--------
Quotes (some portability things, but mainly general correctness):
Quotes prevent tilde-expansion of some unquoted literal tildes (~).
If the expansion is undesirable, quotes would ensure that.
Tilds expanded: a=~user:~/ ; echo ~user ~/dir
not expanded: t="~"; a=${t}user b=\~foo~; echo "~user" $t/dir
But the main reason for quoting is to prevent IFS field splitting
(which also coalesces IFS chars) and glob expansion in parts which
contain parameter/arithmetic expansion or command substitution.
"Simple command" (POSIX term) is assignment[s] and/or command [args].
Examples:
foo=bar # one assignment
foo=$bar x=y # two assignments
foo bar # command, no assignments
x=123 foo bar # one assignment and a command
The assignments part is not IFS-split or glob-expanded.
The command+args part does get IFS field split and glob expanded,
but only at unquoted expanded/substituted parts.
In the command+args part, expanded/substituted values must be quoted.
(the commands here are "[" and "local"):
Good: [ "$mode" = yes ]; local s="*" x="$y" e="$?" z="$(cmd ...)"
Bad: [ $mode = yes ]; local s=* x=$y e=$? z=$(cmd...)
The arguments to "local" do look like assignments, but they're not
the assignment part of a simple command; they're at the command part.
Still at the command part, no need to quote non-expandable values:
Good: local x= y=yes; echo OK
OK, but not required: local x="" y="yes"; echo "OK"
But completely empty (NULL) arguments must be quoted:
foo "" is not the same as: foo
Assignments in simple commands - with or without an actual command,
don't need quoting becase there's no IFS split or glob expansion:
Good: s=* a=$b c=$(cmd...)${x# foo }${y- } [cmd ...]
It's also OK to use double quotes, but not required.
This behavior (no IFS/glob) is called "assignment context", and
"local" does not behave with assignment context in some shells,
hence we require quotes when using "local" - for compatibility.
The value between 'case' and 'in' doesn't IFS-split/glob-expand:
Good: case * $foo $(cmd...) in ... ; esac
identical: case "* $foo $(cmd...)" in ... ; esac
Nested quotes in command substitution are fine, often necessary:
Good: echo "$(foo... "$x" "$(bar ...)")"
Nested quotes in substring ops are legal, and sometimes needed
to prevent interpretation as a pattern, but not the most readable:
Legal: foo "${x#*"$y" }"
Nested quotes in "maybe other value" subst are invalid, unnecessary:
Good: local x="${y- }"; foo "${z:+ $a }"
Bad: local x="${y-" "}"; foo "${z:+" $a "}"
Outer/inner quotes in "maybe other value" have different use cases:
"${x-$y}" always one quoted arg: "$x" if x is set, else "$y".
${x+"$x"} one quoted arg "$x" if x is set, else no arg at all.
Unquoted $x is similar to the second case, but it would get split
into few arguments if it includes any of the IFS chars.
Assignments don't need the outer quotes, and the braces delimit the
value, so nested quotes can be avoided, for readability:
a=$(foo "$x") a=${x#*"$y" } c=${y- }; bar "$a" "$b" "$c"
Signed-off-by: Avi Halachmi (:avih) <avihpit@yahoo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing [[...]] tests were either already valid as standard [...]
tests, or only required minimal retouch:
Notes:
- [[...]] doesn't do field splitting and glob expansion, so $var
or $(cmd...) don't need quoting, but [... does need quotes.
- [[ X == Y ]] when Y is a string is same as [ X = Y ], but if Y is
a pattern, then we need: case X in Y)... ; esac .
- [[ ... && ... ]] was replaced with [ ... ] && [ ... ] .
- [[ -o <zsh-option> ]] requires [[...]], so put it in "eval" and only
eval it in zsh, so other shells would not abort on syntax error
(posix says [[ has unspecified results, shells allowed to reject it)
- ((x++)) was changed into x=$((x+1)) (yeah, not [[...]] ...)
Shells which accepted the previous forms:
- bash, zsh, ksh93, mksh, openbsd sh, pdksh.
Shells which didn't, and now can process it:
- dash, free/net bsd sh, busybox-ash, Schily Bourne sh, yash.
Signed-off-by: Avi Halachmi (:avih) <avihpit@yahoo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Arrays only existed in the svn-upstream code, used to:
- Keep a list of svn remotes.
- Convert commit msg to array of words, extract the 2nd-to-last word.
Except bash/zsh, nearly all shells failed load on syntax errors here.
Now:
- The svn remotes are a list of newline-terminated values.
- The 2nd-to-last word is extracted using standard shell substrings.
- All shells can digest the svn-upstream code.
While using shell field splitting to extract the word is simple, and
doesn't even need non-standard code, e.g. set -- $(git log -1 ...),
it would have the same issues as the old array code: it depends on IFS
which we don't control, and it's subject to glob-expansion, e.g. if
the message happens to include * or **/* (as this commit message just
did), then the array could get huge. This was not great.
Now it uses standard shell substrings, and we know the exact delimiter
to expect, because it's the match from our grep just one line earlier.
The new word extraction code also fixes svn-upstream in zsh, because
previously it used arr[len-2], but because in zsh, unlike bash, array
subscripts are 1-based, it incorrectly extracted the 3rd-to-last word.
symptom: missing upstream status in a git-svn repo: u=, u+N-M, etc.
The breakage in zsh is surprising, because it was last touched by
commit d0583da838 (prompt: fix show upstream with svn and zsh),
claiming to fix exactly that. However, it only mentions syntax fixes.
It's unclear if behavior was fixed too. But it was broken, now fixed.
Note LF=$'\n' and then using $LF instead of $'\n' few times.
A future commit will add fallback for shells without $'...', so this
would be the only line to touch instead of replacing every $'\n' .
Shells which could run the previous array code:
- bash
Shells which have arrays but were broken anyway:
- zsh: 1-based subscript
- ksh93: no "local" (the new code can't fix this part...)
- mksh, openbsd sh, pdksh: failed load on syntax error: "for ((...))".
More shells which Failed to load due to syntax error:
- dash, free/net bsd sh, busybox-ash, Schily Bourne shell, yash.
Signed-off-by: Avi Halachmi (:avih) <avihpit@yahoo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
First use is in the form: local var; ...; var=$var$whatever...
If the variable was unset (as bash and others do after "local x"),
then it would error if set -u is in effect.
Also, many shells inherit the existing value after "local var"
without init, but in this case it's unlikely to have a prior value.
Now we initialize it.
(local var= is enough, but local var="" is the custom in this file)
Signed-off-by: Avi Halachmi (:avih) <avihpit@yahoo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Here-documend is standard, and works in all shells.
Both here-string and here-doc add final newline, which is important
in this case, because $output is without final newline, but we do
want "read" to succeed on the last line as well.
Shells which support here-string:
- bash, zsh, mksh, ksh93, yash (non-posix-mode).
shells which don't, and got fixed:
- ash-derivatives (dash, free/net bsd sh, busybox-ash).
- pdksh, openbsd sh.
- All Schily Bourne shell variants.
Signed-off-by: Avi Halachmi (:avih) <avihpit@yahoo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With fe3ccc7aab (Merge branch 'ps/config-subcommands', 2024-05-15),
git-config(1) has gained support for subcommands. These subcommands live
next to the old, action-based mode, so that both the old and new way
continue to work.
The manpage for this command has been updated to prominently show the
subcommands, and the action-based modes are marked as deprecated. Update
Bash completion scripts accordingly to advertise subcommands instead of
actions.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Command line completion support for zsh (in contrib/) has been
updated to stop exposing internal state to end-user shell
interaction.
* dk/zsh-git-repo-path-fix:
completion: zsh: stop leaking local cache variable
|
|
Command line completion script (in contrib/) learned to complete
"git symbolic-ref" a bit better (you need to enable plumbing
commands to be completed with GIT_COMPLETION_SHOW_ALL_COMMANDS).
* rh/complete-symbolic-ref:
completion: add docs on how to add subcommand completions
completion: improve docs for using __git_complete
completion: add 'symbolic-ref'
|
|
Completing commands like "git rebase" in one repository will leak the
local __git_repo_path into the shell's environment so that completing
commands after changing to a different repository will give the old
repository's references (or none at all).
The bug report on the mailing list [1] suggests one simple way to observe
this yourself:
Enter the following commands from some directory:
mkdir a b b/c
for d (a b); git -C $d init && git -C $d commit --allow-empty -m init
cd a
git branch foo
pushd ../b/c
git branch bar
Now type these:
git rebase <TAB>… # completion for bar available; C-c to abort
declare -p __git_repo_path # outputs /path/to/b/.git
popd
git branch # outputs foo, main
git rebase <TAB>… # completion candidates are bar, main!
Ideally, the last typed <TAB> should be yielding foo, main.
Commit beb6ee7163 (completion: extract repository discovery from
__gitdir(), 2017-02-03) anticipated this problem by marking
__git_repo_path as local in __git_main and __gitk_main for Bash
completion but did not give the same mark to _git for Zsh completion.
Thus make __git_repo_path local for Zsh completion, too.
[1]: https://lore.kernel.org/git/CALnO6CBv3+e2WL6n6Mh7ZZHCX2Ni8GpvM4a-bQYxNqjmgZdwdg@mail.gmail.com/
Signed-off-by: D. Ben Knoble <ben.knoble+github@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It took me more than a few tries and a good lecture of __git_main to
understand that the two paragraphs really only refer to adding
completion functions for executables that are not called through git's
subcommand magic. Improve the docs and be more specific.
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Even 'symbolic-ref' is only completed when
GIT_COMPLETION_SHOW_ALL_COMMANDS=1 is set, it currently defaults to
completing file names, which is not very helpful. Add a simple
completion function which completes options and refs.
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Another "set -u" fix for the bash prompt (in contrib/) script.
* vs/complete-with-set-u-fix:
completion: protect prompt against unset SHOWUPSTREAM in nounset mode
completion: fix prompt with unset SHOWCONFLICTSTATE in nounset mode
|
|
As it stands, the only call site of `__git_ps1_show_upstream` checks
that the `GIT_PS1_SHOWUPSTREAM` variable is set, so this is effectively
a no-op. However, that might change, and chances of noticing the
unprotected use might not be that high when it does.
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`GIT_PS1_SHOWCONFLICTSTATE` is a user variable that might not be set,
causing errors when the shell is in `nounset` mode.
Take into account on access by falling back to an empty string.
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The logic to complete the command line arguments to "git worktree"
subcommand (in contrib/) has been updated to correctly honor things
like "git -C dir" etc.
* rj/complete-worktree-paths-fix:
completion: fix __git_complete_worktree_paths
|
|
The command line completion script (in contrib/) learned to
complete "git reflog" better.
* rj/complete-reflog:
completion: reflog subcommands and options
completion: factor out __git_resolve_builtins
completion: introduce __git_find_subcommand
completion: reflog show <log-options>
completion: reflog with implicit "show"
|
|
Make generic the completion for reflog subcommands and its options.
Note that we still need to special case the options for "show".
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We're going to use the result of "git xxx --git-completion-helper" not
only for feeding COMPREPLY.
Therefore, factor out the execution and the caching of its results in
__gitcomp_builtin, to a new function __git_resolve_builtins.
While we're here, move an important comment we have in the function to
its header, so it gains visibility.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let's have a function to get the current subcommand when completing
commands that follow the syntax:
git <command> <subcommand>
As a convenience, let's allow an optional "default subcommand" to be
returned if none is found.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let's add completion for <log-options> in "reflog show" so that the user
can easily discover uses like:
$ git reflog --since=1.day.ago
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When no subcommand is specified to "reflog", we assume "show" [1]:
$ git reflog -h
usage: git reflog [show] [<log-options>] [<ref>]
...
This implicit "show" is not being completed correctly:
$ git checkout -b default
$ git reflog def<TAB><TAB>
... no completion options ...
The expected result is:
$ git reflog default
This happens because we're completing references after seeing a valid
subcommand in the command line. This prevents the implicit "show" from
working properly, but also introduces a new problem: it keeps offering
subcommand options when the subcommand is implicit:
$ git checkout -b explore
$ git reflog default ex<TAB>
...
$ git reflog default expire
The expected result is:
$ git reflog default explore
To fix this, complete references even if no subcommand is present, or in
other words when the subcommand is implicit "show".
Also, only include completion options for subcommands when completing
the right position in the command line.
1. cf39f54efc (git reflog show, 2007-02-08)
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use __git to invoke "worktree list" in __git_complete_worktree_paths, to
respect any "-C" and "--git-dir" options present on the command line.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commits 1e0ee4087e (completion: add and use
__git_compute_first_level_config_vars_for_section, 2024-02-10) and
6e32f718ff (completion: add and use
__git_compute_second_level_config_vars_for_section, 2024-02-10)
introduced new helpers for config completion.
Both helpers use a pipeline of grep and awk to filter the list of config
entries. awk is perfectly capable of filtering, so let's eliminate the
grep process and move the filtering into the awk script.
The "-E" grep option (extended syntax) was not necessary, as $section is
a single word.
While at it, wrap the over-long lines to make them more readable.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command line completion script (in contrib/) learned to
complete configuration variable names better.
* pb/complete-config:
completion: add and use __git_compute_second_level_config_vars_for_section
completion: add and use __git_compute_first_level_config_vars_for_section
completion: complete 'submodule.*' config variables
completion: add space after config variable names also in Bash 3
|
|
Command line completion support (in contrib/) has been
updated for "git bisect".
* bk/complete-bisect:
completion: bisect: recognize but do not complete view subcommand
completion: bisect: complete log opts for visualize subcommand
completion: new function __git_complete_log_opts
completion: bisect: complete missing --first-parent and - -no-checkout options
completion: bisect: complete custom terms and related options
completion: bisect: complete bad, new, old, and help subcommands
completion: tests: always use 'master' for default initial branch name
|
|
In a previous commit we removed some hardcoded config variable names from
function __git_complete_config_variable_name in the completion script by
introducing a new function,
__git_compute_first_level_config_vars_for_section.
The remaining hardcoded config variables are "second level"
configuration variables, meaning 'branch.<name>.upstream',
'remote.<name>.url', etc. where <name> is a user-defined name.
Making use of the new existing --config flag to 'git help', add a new
function, __git_compute_second_level_config_vars_for_section. This
function takes as argument a config section name and computes the
corresponding second-level config variables, i.e. those that contain a
'<' which indicates the start of a placeholder. Note that as in
__git_compute_first_level_config_vars_for_section added previsouly, we
use indirect expansion instead of associative arrays to stay compatible
with Bash 3 on which macOS is stuck for licensing reasons.
As explained in the previous commit, we use the existing pattern in the
completion script of using global variables to cache the list of
variables for each section.
Use this new function and the variables it defines in
__git_complete_config_variable_name to remove hardcoded config
variables, and add a test to verify the new function. Use a single
'case' for all sections with second-level variables names, since the
code for each of them is now exactly the same.
Adjust the name of a test added in a previous commit to reflect that it
now tests the added function.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function __git_complete_config_variable_name in the Bash completion
script hardcodes several config variable names. These variables are
those in config sections where user-defined names can appear, such as
"branch.<name>". These sections are treated first by the case statement,
and the two last "catch all" cases are used for other sections, making
use of the __git_compute_config_vars and __git_compute_config_sections
function, which omit listing any variables containing wildcards or
placeholders. Having hardcoded config variables introduces the risk of
the completion code becoming out of sync with the actual config
variables accepted by Git.
To avoid these hardcoded config variables, introduce a new function,
__git_compute_first_level_config_vars_for_section, making use of the
existing __git_config_vars variable. This function takes as argument a
config section name and computes the matching "first level" config
variables for that section, i.e. those _not_ containing any placeholder,
like 'branch.autoSetupMerge, 'remote.pushDefault', etc. Use this
function and the variables it defines in the 'branch.*', 'remote.*' and
'submodule.*' switches of the case statement instead of hardcoding the
corresponding config variables. Note that we use indirect expansion to
create a variable for each section, instead of using a single
associative array indexed by section names, because associative arrays
are not supported in Bash 3, on which macOS is stuck for licensing
reasons.
Use the existing pattern in the completion script of using global
variables to cache the list of config variables for each section. The
rationale for such caching is explained in eaa4e6ee2a (Speed up bash
completion loading, 2009-11-17), and the current approach to using and
defining them via 'test -n' is explained in cf0ff02a38 (completion: work
around zsh option propagation bug, 2012-02-02).
Adjust the name of one of the tests added in the previous commit,
reflecting that it now also tests the new function.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the Bash completion script, function
__git_complete_config_variable_name completes config variables and has
special logic to deal with config variables involving user-defined
names, like branch.<name>.* and remote.<name>.*.
This special logic is missing for submodule-related config variables.
Add the appropriate branches to the case statement, making use of the
in-tree '.gitmodules' to list relevant submodules.
Add corresponding tests in t9902-completion.sh, making sure we complete
both first level submodule config variables as well as second level
variables involving submodule names.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In be6444d1ca (completion: bash: add correct suffix in variables,
2021-08-16), __git_complete_config_variable_name was changed to use
"${sfx- }" instead of "$sfx" as the fourth argument of _gitcomp_nl and
_gitcomp_nl_append, such that this argument evaluates to a space if sfx
is unset. This was to ensure that e.g.
git config branch.autoSetupMe[TAB]
correctly completes to 'branch.autoSetupMerge ' with the trailing space.
This commits notes that the fix only works in Bash 4 because in Bash 3
the 'local sfx' construct at the beginning of
__git_complete_config_variable_name creates an empty string.
Make the fix also work for Bash 3 by using the "unset or null' parameter
expansion syntax ("${sfx:- }"), such that the parameter is also expanded
to a space if it is set but null, as is the behaviour of 'local sfx' in
Bash 3.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "view" alias for the visualize subcommand is neither completed nor
recognized. It's undesirable to complete it because it's first letters
are the same as for visualize, making completion less rather than more
efficient without adding much in the way of interface discovery.
However, it needs to be recognized in order to enable log option
completion for it.
Recognize but do not complete the view command by creating and using
separate lists of completable_subcommands and all_subcommands. Add
tests.
Signed-off-by: Britton Leo Kerin <britton.kerin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Arguments passed to the "visualize" subcommand of git-bisect(1) get
forwarded to git-log(1). It thus supports the same options as git-log(1)
would, but our Bash completion script does not know to handle this.
Make completion of porcelain git-log options and option arguments to the
visualize subcommand work by calling __git_complete_log_opts when the
start of an option to the subcommand is seen (visualize doesn't support
any options besides the git-log options). Add test.
Signed-off-by: Britton Leo Kerin <britton.kerin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The options accepted by git-log are also accepted by at least one other
command (git-bisect). Factor the common option completion code into a
new function and use it from _git_log. The new function leaves
COMPREPLY empty if no option candidates are found, so that callers can
safely check it to determine if completion for other arguments should be
attempted.
Signed-off-by: Britton Leo Kerin <britton.kerin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --first-parent and --no-checkout options to the start subcommand of
git-bisect(1) are not completed.
Enable completion of the --first-parent and --no-checkout options to the
start subcommand. Add test.
Signed-off-by: Britton Leo Kerin <britton.kerin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git bisect supports the use of custom terms via the --term-(new|bad) and
--term-(old|good) options, but the completion code doesn't know about
these options or the new subcommands they define.
Add support for these options and the custom subcommands by checking for
BISECT_TERMS and adding them to the list of subcommands. Add tests.
Signed-off-by: Britton Leo Kerin <britton.kerin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The bad, new, old and help subcommands to git-bisect(1) are not
completed.
Add the bad, new, old, and help subcommands to the appropriate lists
such that the commands and their possible ref arguments are completed.
Add tests.
Signed-off-by: Britton Leo Kerin <britton.kerin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The completion script (in contrib/) learned more options that can
be used with "git log".
* pb/complete-log-more:
completion: complete missing 'git log' options
completion: complete --encoding
completion: complete --patch-with-raw
completion: complete missing rev-list options
|
