| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The "do you still use it?" message given by a command that is
deeply deprecated and allow us to suggest alternatives has been
updated.
* kh/you-still-use-whatchanged-fix:
BreakingChanges: remove claim about whatchanged reports
whatchanged: remove not-even-shorter clause
whatchanged: hint about git-log(1) and aliasing
you-still-use-that??: help the user help themselves
t0014: test shadowing of aliases for a sample of builtins
git: allow alias-shadowing deprecated builtins
git: move seen-alias bookkeeping into handle_alias(...)
git: add `deprecated` category to --list-cmds
Makefile: don’t add whatchanged after it has been removed
|
|
git-whatchanged(1) is deprecated and you need to pass
`--i-still-use-this` in order to force it to work as before.
There are two affected users, or usages:
1. people who use the command in scripts; and
2. people who are used to using it interactively.
For (1) the replacement is straightforward.[1] But people in (2) might
like the name or be really used to typing it.[3]
An obvious first thought is to suggest aliasing `whatchanged` to the
git-log(1) equivalent.[1] But this doesn’t work and is awkward since you
cannot shadow builtins via aliases.
Now you are left in an uncomfortable limbo; your alias won’t work until
the command is removed for good.
Let’s lift this limitation by allowing *deprecated* builtins to be
shadowed by aliases.
The only observed demand for aliasing has been for git-whatchanged(1),
not for git-pack-redundant(1). But let’s be consistent and treat all
deprecated commands the same.
[1]:
git log --raw --no-merges
With a minor caveat: you get different outputs if you happen to
have empty commits (no changes)[2]
[2]: https://lore.kernel.org/git/20250825085428.GA367101@coredump.intra.peff.net/
[3]: https://lore.kernel.org/git/BL3P221MB0449288C8B0FA448A227FD48833AA@BL3P221MB0449.NAMP221.PROD.OUTLOOK.COM/
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We are about to complicate the command handling by allowing *deprecated*
builtins to be shadowed by aliases. We need to organize the code in
order to facilitate that.[1]
The code in the `while(1)` speculatively adds commands to the list
before finding out if it’s an alias. Let’s instead move it inside
`handle_alias(...)`—where it conceptually belongs anyway—and in turn
only run this logic when we have found an alias.[2]
[1]: We will do that with an additional call to `handle_alias(1)` inside
the loop. *Not* moving this code leaves a blind spot; we will miss
alias looping crafted via deprecated builtin names
[2]: Also rename the list to a more descriptive name
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With 145 builtin commands (according to `git --list-cmds=builtins`),
users are probably not keeping on top of which ones (if any) are
deprecated.
Let’s expand the experimental `--list-cmds`[1] to allow users and
programs to query for this information. We will also use this in an
upcoming commit to implement `is_deprecated_command`.
[1]: Using something which is experimental to query for deprecations is
perhaps not the most ideal approach, but it is simple to implement
and better than having to scan the documentation
Acked-by: Patrick Steinhardt <ps@pks.im>
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A new command "git last-modified" has been added to show the closest
ancestor commit that touched each path.
* tc/last-modified:
last-modified: use Bloom filters when available
t/perf: add last-modified perf script
last-modified: new subcommand to show when files were last modified
|
|
Similar to git-blame(1), introduce a new subcommand
git-last-modified(1). This command shows the most recent modification to
paths in a tree. It does so by expanding the tree at a given commit,
taking note of the current state of each path, and then walking
backwards through history looking for commits where each path changed
into its final commit ID.
Based-on-patch-by: Jeff King <peff@peff.net>
Improved-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A new subcommand "git repo" gives users a way to grab various
repository characteristics.
* lo/repo-info:
repo: add the --format flag
repo: add the field layout.shallow
repo: add the field layout.bare
repo: add the field references.format
repo: declare the repo command
|
|
"git cmd --help-all" now works outside repositories.
* dk/help-all:
builtin: also setup gently for --help-all
parse-options: refactor flags for usage_with_options_internal
|
|
Currently, `git rev-parse` covers a wide range of functionality not
directly related to parsing revisions, as its name suggests. Over time,
many features like parsing datestrings, options, paths, and others
were added to it because there wasn't a more appropriate command
to place them.
Create a new Git command called `repo`. `git repo` will be the main
command for obtaining the information about a repository (such as
metadata and metrics).
Also declare a subcommand for `repo` called `info`. `git repo info`
will bring the functionality of retrieving repository-related
information currently returned by `rev-parse`.
Add the required documentation and build changes to enable usage of
this subcommand.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Justin Tobler <jltobler@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Mentored-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Lucas Seiki Oshiro <lucasseikioshiro@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git experts often check the help summary of a command to make sure they
spell options right when suggesting advice to colleagues. Further, they
might check hidden options when responding to queries about deprecated
options like git-rebase(1)'s "preserve merges" option. But some commands
don't support "--help-all" outside of a git directory. Running (for
example)
git rebase --help-all
outside a directory fails in "setup_git_directory", erroring with the
localized form of
fatal: not a git repository (or any of the parent directories): .git
Like 99caeed05d (Let 'git <command> -h' show usage without a git dir,
2009-11-09), we want to show the "--help-all" output even without a git
dir. Make "--help-all" where we expect "-h" to mean
"setup_git_directory_gently", and interpose early in the natural place
("show_usage_with_options_if_asked").
Do the same for usage callers with show_usage_if_asked.
The exception is merge-recursive, whose help block doesn't use newer
APIs.
Best-viewed-with: --ignore-space-change
Signed-off-by: D. Ben Knoble <ben.knoble+github@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Builtin commands show usage information on stdout if called with -h as
their only option, usage.c::show_usage_if_asked() makes sure of that.
Aliases show alias information on stderr if called with -h as the first
option since a9a60b94cc (git.c: handle_alias: prepend alias info when
first argument is -h, 2018-10-09). This is surprising when using
aliases for commands that take -h as a normal argument among others,
like git grep.
Tighten the condition and show the alias information only if -h is the
only option given, to be consistent with builtins.
It's probably still is a good idea to write to stderr, as an alias
command doesn't have to be a builtin and could instead produce output
with just -h that might be spoiled by an extra alias info line.
Reported-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git whatchanged" that is longer to type than "git log --raw"
which is its modern rough equivalent has outlived its usefulness
more than 10 years ago. Plan to deprecate and remove it.
* jc/you-still-use-whatchanged:
whatschanged: list it in BreakingChanges document
whatchanged: remove when built with WITH_BREAKING_CHANGES
whatchanged: require --i-still-use-this
tests: prepare for a world without whatchanged
doc: prepare for a world without whatchanged
you-still-use-that??: help deprecating commands for removal
|
|
run_builtin() takes a repo parameter, so the use of the_repository
is no longer necessary. Removed the usage of the_repository.
Signed-off-by: Lidong Yan <502024330056@smail.nju.edu.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we made "git whatchanged" require "--i-still-use-this" and asked
the users to report if they still want to use it, the logical next
step is to allow us build Git without "whatchanged" to prepare for
its eventual removal.
If we were to follow the pattern established in 8ccc75c2 (remote:
announce removal of "branches/" and "remotes/", 2025-01-22), we can
do this together with the documentation update to officially list
that the command will be removed in the BreakingChanges document,
but let's just keep the changes separate just in case we want to
proceed a bit slower.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Through git-diff(1), a single diff can be generated from a pair of blob
revisions directly. Unfortunately, there is not a mechanism to compute
batches of specific file pair diffs in a single process. Such a feature
is particularly useful on the server-side where diffing between a large
set of changes is not feasible all at once due to timeout concerns.
To facilitate this, introduce git-diff-pairs(1) which acts as a backend
passing its NUL-terminated raw diff format input from stdin through diff
machinery to produce various forms of output such as patch or raw.
The raw format was originally designed as an interchange format and
represents the contents of the diff_queued_diff list making it possible
to break the diff pipeline into separate stages. For example,
git-diff-tree(1) can be used as a frontend to compute file pairs to
queue and feed its raw output to git-diff-pairs(1) to compute patches.
With this, batches of diffs can be progressively generated without
having to recompute renames or retrieve object context. Something like
the following:
git diff-tree -r -z -M $old $new |
git diff-pairs -p -z
should generate the same output as `git diff-tree -p -M`. Furthermore,
each line of raw diff formatted input can also be individually fed to a
separate git-diff-pairs(1) process and still produce the same output.
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In anticipation of implementing 'git backfill', populate the necessary files
with the boilerplate of a new builtin. Mark the builtin as experimental at
this time, allowing breaking changes in the near future, if necessary.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Following the procedure we established to introduce breaking
changes for Git 3.0, allow an early opt-in for removing support of
$GIT_DIR/branches/ and $GIT_DIR/remotes/ directories to configure
remotes.
* ps/3.0-remote-deprecation:
remote: announce removal of "branches/" and "remotes/"
builtin/pack-redundant: remove subcommand with breaking changes
ci: repurpose "linux-gcc" job for deprecations
ci: merge linux-gcc-default into linux-gcc
Makefile: wire up build option for deprecated features
|
|
The git-pack-redundant(1) subcommand has been castrated to require
the "--i-still-use-this" option to do anything since 4406522b
(pack-redundant: escalate deprecation warning to an error,
2023-03-23), which appeared in Git 2.41 and was announced for
removal with 53a92c9552 (Documentation/BreakingChanges: announce
removal of git-pack-redundant(1), 2024-09-02). Stop compiling the
subcommand in case the `WITH_BREAKING_CHANGES` build flag is set.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop using `the_repository` in the "trace" subsystem by passing in a
repository when setting up tracing.
Adjust the only caller accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop using `the_repository` in the "pager" subsystem by passing in a
repository when setting up the pager and when configuring it.
Adjust callers accordingly by using `the_repository`. While there may be
some callers that have a repository available in their context, this
trivial conversion allows for easier verification and bubbles up the use
of `the_repository` by one level.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have a bunch of loops which iterate up to an unsigned boundary using
a signed index, which generates warnigs because we compare a signed and
unsigned value in the loop condition. Address these sites for trivial
cases and enable `-Wsign-compare` warnings for these code units.
This patch only adapts those code units where we can drop the
`DISABLE_SIGN_COMPARE_WARNINGS` macro in the same step.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While `help_unknown_cmd()` would usually die on an unknown command, it
instead returns an autocorrected command when "help.autocorrect" is set.
But while the function is declared to return a string constant, it
actually returns an allocated string in that case. Callers thus aren't
aware that they have to free the string, leading to a memory leak.
Fix the function return type to be non-constant and free the returned
value at its only callsite.
Note that we cannot simply take ownership of `main_cmds.names[0]->name`
and then eventually free it. This is because the `struct cmdname` is
using a flex array to allocate the name, so the name pointer points into
the middle of the structure and thus cannot be freed.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar as with the preceding commit, `handle_builtin()` does not
properly track lifetimes of the `argv` array and its strings. As it may
end up modifying the array this can lead to memory leaks in case it
contains allocated strings.
Refactor the function to use a `struct strvec` instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `handle_alias()` we use both `argcp` and `argv` as in-out parameters.
Callers mostly pass through the static array from `main()`, but once we
handle an alias we replace it with an allocated array that may contain
some allocated strings. Callers do not handle this scenario at all and
thus leak memory.
We could in theory handle the lifetime of `argv` in a hacky fashion by
letting callers free it in case they see that an alias was handled. But
while that would likely work, we still wouldn't be able to easily handle
the lifetime of strings referenced by `argv`.
Refactor the code to instead use a `struct strvec`, which effectively
removes the need for us to manually track lifetimes.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commands that can also work outside Git have learned to take the
repository instance "repo" when we know we are in a repository, and
NULL when we are not, in a parameter. The uses of the_repository
variable in a few of them have been removed using the new calling
convention.
* jc/a-commands-without-the-repo:
archive: remove the_repository global variable
annotate: remove usage of the_repository global
git: pass in repo to builtin based on setup_git_directory_gently
|
|
The current code in run_builtin() passes in a repository to the builtin
based on whether cmd_struct's option flag has RUN_SETUP.
This is incorrect, however, since some builtins that only have
RUN_SETUP_GENTLY can potentially take a repository.
setup_git_directory_gently() tells us whether or not a command is being
run inside of a repository.
Use the output of setup_git_directory_gently() to help determine whether
or not there is a repository to pass to the builtin. If not, then we
just pass NULL.
As part of this patch, we need to modify add to check for a NULL repo
before calling repo_git_config(), since add -h can be run outside of a
repository.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More leak-fixes.
* ps/leakfixes-part-7: (23 commits)
diffcore-break: fix leaking filespecs when merging broken pairs
revision: fix leaking parents when simplifying commits
builtin/maintenance: fix leak in `get_schedule_cmd()`
builtin/maintenance: fix leaking config string
promisor-remote: fix leaking partial clone filter
grep: fix leaking grep pattern
submodule: fix leaking submodule ODB paths
trace2: destroy context stored in thread-local storage
builtin/difftool: plug several trivial memory leaks
builtin/repack: fix leaking configuration
diffcore-order: fix leaking buffer when parsing orderfiles
parse-options: free previous value of `OPTION_FILENAME`
diff: fix leaking orderfile option
builtin/pull: fix leaking "ff" option
dir: fix off by one errors for ignored and untracked entries
builtin/submodule--helper: fix leaking remote ref on errors
t/helper: fix leaking subrepo in nested submodule config helper
builtin/submodule--helper: fix leaking error buffer
builtin/submodule--helper: clear child process when not running it
submodule: fix leaking update strategy
...
|
|
In `handle_builtin()` we may end up creating an ad-hoc argv array in
case we see that the command line contains the "--help" parameter. In
this case we observe two memory leaks though:
- We leak the `struct strvec` itself because we directly exit after
calling `run_builtin()`, without bothering about any cleanups.
- Even if we free'd that vector we'd end up leaking some of its
strings because `run_builtin()` will modify the array.
Plug both of these leaks.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to reduce the usage of the global the_repository, add a
parameter to builtin functions that will get passed a repository
variable.
This commit uses UNUSED on most of the builtin functions, as subsequent
commits will modify the actual builtins to pass the repository parameter
down.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git has some flags to make it output system paths as they have been
compiled into Git. This is done by calling `system_path()`, which
returns an allocated string. This string isn't ever free'd though,
creating a memory leak.
Plug those leaks. While they are surfaced by t0211, there are more
memory leaks looming exposed by that test suite and it thus does not yet
pass with the memory leak checker enabled.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use of the `the_repository` variable is deprecated nowadays, and we
slowly but steadily convert the codebase to not use it anymore. Instead,
callers should be passing down the repository to work on via parameters.
It is hard though to prove that a given code unit does not use this
variable anymore. The most trivial case, merely demonstrating that there
is no direct use of `the_repository`, is already a bit of a pain during
code reviews as the reviewer needs to manually verify claims made by the
patch author. The bigger problem though is that we have many interfaces
that implicitly rely on `the_repository`.
Introduce a new `USE_THE_REPOSITORY_VARIABLE` macro that allows code
units to opt into usage of `the_repository`. The intent of this macro is
to demonstrate that a certain code unit does not use this variable
anymore, and to keep it from new dependencies on it in future changes,
be it explicit or implicit
For now, the macro only guards `the_repository` itself as well as
`the_hash_algo`. There are many more known interfaces where we have an
implicit dependency on `the_repository`, but those are not guarded at
the current point in time. Over time though, we should start to add
guards as required (or even better, just remove them).
Define the macro as required in our code units. As expected, most of our
code still relies on the global variable. Nearly all of our builtins
rely on the variable as there is no way yet to pass `the_repository` to
their entry point. For now, declare the macro in "biultin.h" to keep the
required changes at least a little bit more contained.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a new command that allows the user to migrate a repository
between ref storage formats. This new command is implemented as part of
a new git-refs(1) executable. This is due to two reasons:
- There is no good place to put the migration logic in existing
commands. git-maintenance(1) felt unwieldy, and git-pack-refs(1) is
not the correct place to put it, either.
- I had it in my mind to create a new low-level command for accessing
refs for quite a while already. git-refs(1) is that command and can
over time grow more functionality relating to refs. This should help
discoverability by consolidating low-level access to refs into a
single executable.
As mentioned in the preceding commit that introduces the ref storage
format migration logic, the new `git refs migrate` command still has a
bunch of restrictions. These restrictions are documented accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Advice hints must be disabled individually by setting the relevant
advice.* variables to false in the Git configuration. For server-side
and scripted usages of Git where hints can be a hindrance, it can be
cumbersome to maintain configuration to ensure all advice hints are
disabled in perpetuity. This is a particular concern in tests, where
new or changed hints can result in failed assertions.
Add a --no-advice global option to disable all advice hints from being
displayed. This is independent of the toggles for individual advice
hints. Use an internal environment variable (GIT_ADVICE) to ensure this
configuration is propagated to the usage site, even if it executes in a
subprocess.
Signed-off-by: James Liu <james@jamesliu.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We'll be adding another option to the --no-* class of options soon.
Clean up the existing options by grouping them together in the OPTIONS
section, and adding missing ones to the SYNOPSIS.
Signed-off-by: James Liu <james@jamesliu.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some trace2 events that lacked def_param have learned to show it,
enriching the output.
Reviewed-by: Josh Steadmon <steadmon@google.com>
cf. <ZejkVOVQBZhLVfHW@google.com>
* jh/trace2-missing-def-param-fix:
trace2: emit 'def_param' set with 'cmd_name' event
trace2: avoid emitting 'def_param' set more than once
t0211: demonstrate missing 'def_param' events for certain commands
|
|
"git --no-lazy-fetch cmd" allows to run "cmd" while disabling lazy
fetching of objects from the promisor remote, which may be handy
for debugging.
* jc/no-lazy-fetch:
git: extend --no-lazy-fetch to work across subprocesses
git: document GIT_NO_REPLACE_OBJECTS environment variable
git: --no-lazy-fetch option
|
|
Some commands do not cause a set of 'def_param' events to be emitted.
This includes "git-remote-https", "git-http-fetch", and various
"query" commands, like "git --man-path".
Since all of these commands do emit a 'cmd_name' event, add code to
the "trace2_cmd_name()" function to generate the set of 'def_param'
events.
Remove explicit calls to "trace2_cmd_list_config()" and
"trace2_cmd_list_env_vars()" in git.c since they are no longer needed.
Reviewed-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Jeff Hostetler <jeffhostetler@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Modeling after how the `--no-replace-objects` option is made usable
across subprocess spawning (e.g., cURL based remote helpers are
spawned as a separate process while running "git fetch"), allow the
`--no-lazy-fetch` option to be passed across process boundaries.
Do not model how the value of GIT_NO_REPLACE_OBJECTS environment
variable is ignored, though. Just use the usual git_env_bool() to
allow "export GIT_NO_LAZY_FETCH=0" and "unset GIT_NO_LAZY_FETCH"
to be equivalents.
Also do not model how the request is not propagated to subprocesses
we spawn (e.g. "git clone --local" that spawns a new process to work
in the origin repository, while the original one working in the
newly created one) by the "--no-replace-objects" option, as this "do
not lazily fetch from the promisor" is more about a per-request
debugging aid, not "this repository's promisor should not be relied
upon" property specific to a repository.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sometimes, especially during tests of low level machinery, it is
handy to have a way to disable lazy fetching of objects. This
allows us to say, for example, "git cat-file -e <object-name>", to
see if the object is locally available.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For now, this is just a rename from `t/helper/test-fast-rebase.c` into
`builtin/replay.c` with minimal changes to make it build appropriately.
Let's add a stub documentation and a stub test script though.
Subsequent commits will flesh out the capabilities of the new command
and make it a more standard regular builtin.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Header files cleanup.
* en/header-split-cache-h-part-3: (28 commits)
fsmonitor-ll.h: split this header out of fsmonitor.h
hash-ll, hashmap: move oidhash() to hash-ll
object-store-ll.h: split this header out of object-store.h
khash: name the structs that khash declares
merge-ll: rename from ll-merge
git-compat-util.h: remove unneccessary include of wildmatch.h
builtin.h: remove unneccessary includes
list-objects-filter-options.h: remove unneccessary include
diff.h: remove unnecessary include of oidset.h
repository: remove unnecessary include of path.h
log-tree: replace include of revision.h with simple forward declaration
cache.h: remove this no-longer-used header
read-cache*.h: move declarations for read-cache.c functions from cache.h
repository.h: move declaration of the_index from cache.h
merge.h: move declarations for merge.c from cache.h
diff.h: move declaration for global in diff.c from cache.h
preload-index.h: move declarations for preload-index.c from elsewhere
sparse-index.h: move declarations for sparse-index.c from cache.h
name-hash.h: move declarations for name-hash.c from cache.h
run-command.h: move declarations for run-command.c from cache.h
...
|
|
Introduce a mechanism to disable replace refs globally and per
repository.
* ds/disable-replace-refs:
repository: create read_replace_refs setting
replace-objects: create wrapper around setting
repository: create disable_replace_refs()
|
|
For the functions defined in read-cache.c, move their declarations from
cache.h to a new header, read-cache-ll.h. Also move some related inline
functions from cache.h to read-cache.h. The purpose of the
read-cache-ll.h/read-cache.h split is that about 70% of the sites don't
need the inline functions and the extra headers they include.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Several builtins depend on being able to disable the replace references
so we actually operate on each object individually. These currently do
so by directly mutating the 'read_replace_refs' global.
A future change will move this global into a different place, so it will
be necessary to change all of these lines. However, we can simplify that
transition by abstracting the purpose of these global assignments with a
method call.
We will need to keep this read_replace_refs global forever, as we want
to make sure that we never use replace refs throughout the life of the
process if this method is called. Future changes may present a
repository-scoped version of the variable to represent that repository's
core.useReplaceRefs config value, but a zero-valued read_replace_refs
will always override such a setting.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier, 47cfc9bd (attr: add flag `--source` to work with tree-ish,
2023-01-14) taught "git check-attr" the "--source=<tree>" option to
allow it to read attribute files from a tree-ish, but did so only
for the command. Just like "check-attr" users wanted a way to use
attributes from a tree-ish and not from the working tree files,
users of other commands (like "git diff") would benefit from the
same.
Undo most of the UI change the commit made, while keeping the
internal logic to read attributes from a given tree-ish. Expose the
internal logic via a new "--attr-source=<tree>" command line option
given to "git", so that it can be used with any git command that
runs as part of the main git process.
Additionally, add an environment variable GIT_ATTR_SOURCE that is set
when --attr-source is passed in, so that subprocesses use the same value
for the attributes source tree.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Header clean-up.
* en/header-split-cache-h: (24 commits)
protocol.h: move definition of DEFAULT_GIT_PORT from cache.h
mailmap, quote: move declarations of global vars to correct unit
treewide: reduce includes of cache.h in other headers
treewide: remove double forward declaration of read_in_full
cache.h: remove unnecessary includes
treewide: remove cache.h inclusion due to pager.h changes
pager.h: move declarations for pager.c functions from cache.h
treewide: remove cache.h inclusion due to editor.h changes
editor: move editor-related functions and declarations into common file
treewide: remove cache.h inclusion due to object.h changes
object.h: move some inline functions and defines from cache.h
treewide: remove cache.h inclusion due to object-file.h changes
object-file.h: move declarations for object-file.c functions from cache.h
treewide: remove cache.h inclusion due to git-zlib changes
git-zlib: move declarations for git-zlib functions from cache.h
treewide: remove cache.h inclusion due to object-name.h changes
object-name.h: move declarations for object-name.c functions from cache.h
treewide: remove unnecessary cache.h inclusion
treewide: be explicit about dependence on mem-pool.h
treewide: be explicit about dependence on oid-array.h
...
|
|
"git sparse-checkout" command learns a debugging aid for the sparse
rule definitions.
* ws/sparse-check-rules:
builtin/sparse-checkout: add check-rules command
builtin/sparse-checkout: remove NEED_WORK_TREE flag
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of trace and trace2 functions, without
explicitly including trace.h or trace2.h. This made it more difficult
to find which files could remove a dependence on cache.h. Make C files
explicitly include trace.h or trace2.h if they are using them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
