| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Dip our toes a bit to (optionally) use Rust implemented helper
called from our C code.
* ps/rust-balloon:
ci: enable Rust for breaking-changes jobs
ci: convert "pedantic" job into full build with breaking changes
BreakingChanges: announce Rust becoming mandatory
varint: reimplement as test balloon for Rust
varint: use explicit width for integers
help: report on whether or not Rust is enabled
Makefile: introduce infrastructure to build internal Rust library
Makefile: reorder sources after includes
meson: add infrastructure to build internal Rust library
|
|
The varint subsystem currently uses implicit widths for integers. On the
one hand we use `uintmax_t` for the actual value. On the other hand, we
use `int` for the length of the encoded varint.
Both of these have known maximum values, as we only support at most 16
bytes when encoding varints. Thus, we know that we won't ever exceed
`uint64_t` for the actual value and `uint8_t` for the prefix length.
Refactor the code to use explicit widths. Besides making the logic
platform-independent, it also makes our life a bit easier in the next
commit, where we reimplement "varint.c" in Rust.
Suggested-by: Ezekiel Newren <ezekielnewren@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Transactions are managed via the {begin,end}_odb_transaction() function
in the object-file subsystem and its implementation is specific to the
files object source. Introduce odb_transaction_{begin,commit}() in the
odb subsystem to provide an eventual object source agnostic means to
manage transactions.
Update call sites to instead manage transactions through the odb
subsystem. Also rename {begin,end}_odb_transaction() functions to
object_file_transaction_{begin,commit}() to clarify the object source it
supports.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The bulk-checkin subsystem provides various functions to manage ODB
transactions. Apart from {begin,end}_odb_transaction(), these functions
are only used by the object-file subsystem to manage aspects of a
transaction implementation specific to the files object source.
Relocate all the transaction code in bulk-checkin to object-file. This
simplifies the exposed transaction interface by reducing it to only
{begin,end}_odb_transaction(). Function and type names are adjusted in
the subsequent commit to better fit the new location.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Object database transactions in the bulk-checkin subsystem rely on
global state to track transaction status. Stop relying on global state
and instead store the transaction in the `struct object_database`.
Functions that operate on transactions are updated to now wire
transaction state.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reduce implicit assumption and dependence on the_repository in the
object-file subsystem.
* ps/object-file-wo-the-repository:
object-file: get rid of `the_repository` in index-related functions
object-file: get rid of `the_repository` in `force_object_loose()`
object-file: get rid of `the_repository` in `read_loose_object()`
object-file: get rid of `the_repository` in loose object iterators
object-file: remove declaration for `for_each_file_in_obj_subdir()`
object-file: inline `for_each_loose_file_in_objdir_buf()`
object-file: get rid of `the_repository` when writing objects
odb: introduce `odb_write_object()`
loose: write loose objects map via their source
object-file: get rid of `the_repository` in `finalize_object_file()`
object-file: get rid of `the_repository` in `loose_object_info()`
object-file: get rid of `the_repository` when freshening objects
object-file: inline `check_and_freshen()` functions
object-file: get rid of `the_repository` in `has_loose_object()`
object-file: stop using `the_hash_algo`
object-file: fix -Wsign-compare warnings
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_bool()`. All
callsites are adjusted so that they use
`repo_config_get_bool(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We do not have a backend-agnostic way to write objects into an object
database. While there is `write_object_file()`, this function is rather
specific to the loose object format.
Introduce `odb_write_object()` to plug this gap. For now, this function
is a simple wrapper around `write_object_file()` and doesn't even use
the passed-in object database yet. This will change in subsequent
commits, where `write_object_file()` is converted so that it works on
top of an `odb_source`. `odb_write_object()` will then become
responsible for deciding which source an object shall be written to.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up around object access API.
* ps/object-store:
odb: rename `read_object_with_reference()`
odb: rename `pretend_object_file()`
odb: rename `has_object()`
odb: rename `repo_read_object_file()`
odb: rename `oid_object_info()`
odb: trivial refactorings to get rid of `the_repository`
odb: get rid of `the_repository` when handling submodule sources
odb: get rid of `the_repository` when handling the primary source
odb: get rid of `the_repository` in `for_each()` functions
odb: get rid of `the_repository` when handling alternates
odb: get rid of `the_repository` in `odb_mkstemp()`
odb: get rid of `the_repository` in `assert_oid_type()`
odb: get rid of `the_repository` in `find_odb()`
odb: introduce parent pointers
object-store: rename files to "odb.{c,h}"
object-store: rename `object_directory` to `odb_source`
object-store: rename `raw_object_store` to `object_database`
|
|
In the repo_refresh_and_write_index of read-cache.c, we return -1 to
indicate that writing the index to disk failed.
However, callers do not use this information. Commands such as stash print
"could not write index"
and then exit, which does not help to discover the exact problem.
We can let repo_hold_locked_index print the error message if the locking
failed.
Signed-off-by: Han Young <hanyang.tony@bytedance.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename `repo_read_object_file()` to `odb_read_object()` to match other
functions related to the object database and our modern coding
guidelines.
Introduce a compatibility wrapper so that any in-flight topics will
continue to compile.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename `oid_object_info()` to `odb_read_object_info()` as well as their
`_extended()` variant to match other functions related to the object
database and our modern coding guidelines.
Introduce compatibility wrappers so that any in-flight topics will
continue to compile.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the preceding commits we have renamed the structures contained in
"object-store.h" to `struct object_database` and `struct odb_backend`.
As such, the code files "object-store.{c,h}" are confusingly named now.
Rename them to "odb.{c,h}" accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One thing that might be non-obvious to readers (or to analyzers like
CodeQL) is that the function essentially does nothing when the Git index
is empty, and in particular that it does not look at the value of
`len_eq_last` (which would be uninitialized at that point).
Let's make this much easier to understand, by returning early if the Git
index is empty, and by avoiding empty `else` blocks.
This commit changes indentation and is hence best viewed using
`--ignore-space-change`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* ps/object-file-cleanup:
object-store: merge "object-store-ll.h" and "object-store.h"
object-store: remove global array of cached objects
object: split out functions relating to object store subsystem
object-file: drop `index_blob_stream()`
object-file: split up concerns of `HASH_*` flags
object-file: split out functions relating to object store subsystem
object-file: move `xmmap()` into "wrapper.c"
object-file: move `git_open_cloexec()` to "compat/open.c"
object-file: move `safe_create_leading_directories()` into "path.c"
object-file: move `mkdir_in_gitdir()` into "path.c"
|
|
Work around false positive from CodeQL checker.
* js/range-check-codeql-workaround:
read-cache: check range before dereferencing an array element
|
|
The "object-store-ll.h" header has been introduced to keep transitive
header dependendcies and compile times at bay. Now that we have created
a new "object-store.c" file though we can easily move the last remaining
additional bit of "object-store.h", the `odb_path_map`, out of the
header.
Do so. As the "object-store.h" header is now equivalent to its low-level
alternative we drop the latter and inline it into the former.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The functions `hash_object_file()`, `write_object_file()` and
`index_fd()` reuse the same set of flags to alter their behaviour. This
not only adds confusion, but given that every function only supports a
subset of the flags it becomes very hard to see which flags can be
passed to what function. Last but not least, this entangles the
implementation of all three function families.
Split up concerns by creating separate flags for each of the function
families.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before accessing an array element at a given index, we should make sure
that the index is within the desired bounds, otherwise it makes little
sense to access the array element in the first place.
In this instance, testing whether `ce->name[common]` is the trailing NUL
byte is technically different from testing whether `common` is within
the bounds of `previous_name`. It is also redundant, as the range-check
guarantees that `previous_name->buf[common]` cannot be NUL and therefore
the condition `ce->name[common] == previous_name->buf[common]` would not
be met if `ce->name[common]` evaluated to NUL.
However, in the interest of reducing the cognitive load to reason about
the correctness of this loop (so that I can focus on interesting
projects again), I'll simply move the range-check to the beginning of
the loop condition and keep the redundant NUL check.
This acquiesces CodeQL's `cpp/offset-use-before-range-check` rule.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `null_oid()` function returns the object ID that only consists of
zeroes. Naturally, this ID also depends on the hash algorithm used, as
the number of zeroes is different between SHA1 and SHA256. Consequently,
the function returns the hash-algorithm-specific null object ID.
This is currently done by depending on `the_hash_algo`, which implicitly
makes us depend on `the_repository`. Refactor the function to instead
pass in the hash algorithm for which we want to retrieve the null object
ID. Adapt callsites accordingly by passing in `the_repository`, thus
bubbling up the dependency on that global variable by one layer.
There are a couple of trivial exceptions for subsystems that already got
rid of `the_repository`. These subsystems instead use the repository
that is available via the calling context:
- "builtin/grep.c"
- "grep.c"
- "refs/debug.c"
There are also two non-trivial exceptions:
- "diff-no-index.c": Here we know that we may not have a repository
initialized at all, so we cannot rely on `the_repository`. Instead,
we adapt `diff_no_index()` to get a `struct git_hash_algo` as
parameter. The only caller is located in "builtin/diff.c", where we
know to call `repo_set_hash_algo()` in case we're running outside of
a Git repository. Consequently, it is fine to continue passing
`the_repository->hash_algo` even in this case.
- "builtin/ls-files.c": There is an in-flight patch series that drops
`USE_THE_REPOSITORY_VARIABLE` in this file, which causes a semantic
conflict because we use `null_oid()` in `show_submodule()`. The
value is passed to `repo_submodule_init()`, which may use the object
ID to resolve a tree-ish in the superproject from which we want to
read the submodule config. As such, the object ID should refer to an
object in the superproject, and consequently we need to use its hash
algorithm.
This means that we could in theory just not bother about this edge
case at all and just use `the_repository` in "diff-no-index.c". But
doing so would feel misdesigned.
Remove the `USE_THE_REPOSITORY_VARIABLE` preprocessor define in
"hash.c".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are multiple sites in "csum-file.c" where we use the global
`the_repository` variable, either explicitly or implicitly by using
`the_hash_algo`.
Refactor the code to stop using `the_repository` by adapting functions
to receive required data as parameters. Adapt callsites accordingly by
either using `the_repository->hash_algo`, or by using a context-provided
hash algorithm in case the subsystem already got rid of its dependency
on `the_repository`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The path.[ch] API takes an explicit repository parameter passed
throughout the callchain, instead of relying on the_repository
singleton instance.
* ps/path-sans-the-repository:
path: adjust last remaining users of `the_repository`
environment: move access to "core.sharedRepository" into repo settings
environment: move access to "core.hooksPath" into repo settings
repo-settings: introduce function to clear struct
path: drop `git_path()` in favor of `repo_git_path()`
rerere: let `rerere_path()` write paths into a caller-provided buffer
path: drop `git_common_path()` in favor of `repo_common_path()`
worktree: return allocated string from `get_worktree_git_dir()`
path: drop `git_path_buf()` in favor of `repo_git_path_replace()`
path: drop `git_pathdup()` in favor of `repo_git_path()`
path: drop unused `strbuf_git_path()` function
path: refactor `repo_submodule_path()` family of functions
submodule: refactor `submodule_to_gitdir()` to accept a repo
path: refactor `repo_worktree_path()` family of functions
path: refactor `repo_git_path()` family of functions
path: refactor `repo_common_path()` family of functions
|
|
With the preceding refactorings we now only have a couple of implicit
users of `the_repository` left in the "path" subsystem, all of which
depend on global state via `calc_shared_perm()`. Make the dependency on
`the_repository` explicit by passing the repo as a parameter instead and
adjust callers accordingly.
Note that this change bubbles up into a couple of subsystems that were
previously declared as free from `the_repository`. Instead of marking
all of them as `the_repository`-dependent again, we instead use the
repository that is available in the calling context. There are three
exceptions though with "copy.c", "pack-write.c" and "tempfile.c".
Adjusting these would require us to adapt callsites all over the place,
so this is left for a future iteration.
Mark "path.c" as free from `the_repository`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove `git_path()` in favor of the `repo_git_path()` family of
functions, which makes the implicit dependency on `the_repository` go
away.
Note that `git_path()` returned a string allocated via `get_pathname()`,
which uses a rotating set of statically allocated buffers. Consequently,
callers didn't have to free the returned string. The same isn't true for
`repo_common_path()`, so we also have to add logic to free the returned
strings.
This refactoring also allows us to remove `repo_common_pathv()` as well
as `get_pathname()` from the public interface.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adapt callers to use generic hash context helpers instead of using the
hash algorithm to update them. This makes the callsites easier to reason
about and removes the possibility that the wrong hash algorithm is used
to update the hash context's state. And as a nice side effect this also
gets rid of a bunch of users of `the_hash_algo`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We generally avoid using `typedef` in the Git codebase. One exception
though is the `git_hash_ctx`, likely because it used to be a union
rather than a struct until the preceding commit refactored it. But now
that it is a normal `struct` there isn't really a need for a typedef
anymore.
Drop the typedef and adapt all callers accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop using `the_repository` in the "resolve-undo" subsystem by passing
in the hash algorithm when reading or writing resolve-undo information.
While we could trivially update the caller to pass in the hash algorithm
used by the index itself, we instead pass in `the_hash_algo`. This is
mostly done to stay consistent with the rest of the code in that file,
which isn't prepared to handle arbitrary repositories, either.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop using `the_repository` in the "progress" subsystem by passing in a
repository when initializing `struct progress`. Furthermore, store a
pointer to the repository in that struct so that we can pass it to the
trace2 API when logging information.
Adjust callers accordingly by using `the_repository`. While there may be
some callers that have a repository available in their context, this
trivial conversion allows for easier verification and bubbles up the use
of `the_repository` by one level.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fail gracefully instead of crashing when attempting to write the
contents of a corrupt in-core index as a tree object.
* ps/cache-tree-w-broken-index-entry:
unpack-trees: detect mismatching number of cache-tree/index entries
cache-tree: detect mismatching number of index entries
cache-tree: refactor verification to return error codes
|
|
More leakfixes.
* ps/leakfixes-part-8: (23 commits)
builtin/send-pack: fix leaking list of push options
remote: fix leaking push reports
t/helper: fix leaks in proc-receive helper
pack-write: fix return parameter of `write_rev_file_order()`
revision: fix leaking saved parents
revision: fix memory leaks when rewriting parents
midx-write: fix leaking buffer
pack-bitmap-write: fix leaking OID array
pseudo-merge: fix leaking strmap keys
pseudo-merge: fix various memory leaks
line-log: fix several memory leaks
diff: improve lifecycle management of diff queues
builtin/revert: fix leaking `gpg_sign` and `strategy` config
t/helper: fix leaking repository in partial-clone helper
builtin/clone: fix leaking repo state when cloning with bundle URIs
builtin/pack-redundant: fix various memory leaks
builtin/stash: fix leaking `pathspec_from_file`
submodule: fix leaking submodule entry list
wt-status: fix leaking buffer with sparse directories
shell: fix leaking strings
...
|
|
The function `cache_tree_verify()` will `BUG()` whenever it finds that
the cache-tree extension of the index is corrupt. The function is thus
inherently untestable because the resulting call to `abort()` will be
detected by our testing framework and labelled an error. And rightfully
so: it shouldn't ever be possible to hit bugs, as they should indicate a
programming error rather than corruption of on-disk state.
Refactor the function to instead return error codes. This also ensures
that the function can be used e.g. by git-fsck(1) without the whole
process dying. Furthermore, this refactoring plugs some memory leaks
when returning early by creating a common exit path.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leakfix.
* ds/read-cache-mempool-leakfix:
read-cache: free threaded memory pool
|
|
In load_cache_entries_threaded(), each thread allocates its own memory
pool. This pool needs to be cleaned up while closing the threads down,
or it will be leaked.
This ce_mem_pool pointer could theoretically be converted to an inline
copy of the struct, but the use of a pointer helps with existing lazy-
initialization logic. Adjusting that behavior only to avoid this pointer
would be a much bigger change.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When writing an index with the EOIE extension we allocate a separate
hash context. We never free that context though, causing a memory leak.
Plug it.
This leak is exposed by t9210, but plugging it alone does not make the
whole test suite pass.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `get_git_dir()` function retrieves the path to the Git directory for
`the_repository`. Make it accept a `struct repository` such that it can
work on arbitrary repositories and make it part of the repository
subsystem. This reduces our reliance on `the_repository` and clarifies
scope.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Maintenance tasks other than "gc" now properly go background when
"git maintenance" runs them.
* ps/maintenance-detach-fix:
run-command: fix detaching when running auto maintenance
builtin/maintenance: add a `--detach` flag
builtin/gc: add a `--detach` flag
builtin/gc: stop processing log file on signal
builtin/gc: fix leaking config values
builtin/gc: refactor to read config into structure
config: fix constness of out parameter for `git_config_get_expiry()`
|
|
Use of API functions that implicitly depend on the_repository
object in the config subsystem has been rewritten to pass a
repository object through the callchain.
* ps/config-wo-the-repository:
config: hide functions using `the_repository` by default
global: prepare for hiding away repo-less config functions
config: don't depend on `the_repository` with branch conditions
config: don't have setters depend on `the_repository`
config: pass repo to functions that rename or copy sections
config: pass repo to `git_die_config()`
config: pass repo to `git_config_get_expiry_in_days()`
config: pass repo to `git_config_get_expiry()`
config: pass repo to `git_config_get_max_percent_split_change()`
config: pass repo to `git_config_get_split_index()`
config: pass repo to `git_config_get_index_threads()`
config: expose `repo_config_clear()`
config: introduce missing setters that take repo as parameter
path: hide functions using `the_repository` by default
path: stop relying on `the_repository` in `worktree_git_path()`
path: stop relying on `the_repository` when reporting garbage
hooks: remove implicit dependency on `the_repository`
editor: do not rely on `the_repository` for interactive edits
path: expose `do_git_common_path()` as `repo_common_pathv()`
path: expose `do_git_path()` as `repo_git_pathv()`
|
|
The type of the out parameter of `git_config_get_expiry()` is a pointer
to a constant string, which creates the impression that ownership of the
returned data wasn't transferred to the caller. This isn't true though
and thus quite misleading.
Adapt the parameter to be of type `char **` and adjust callers
accordingly. While at it, refactor `get_shared_index_expire_date()` to
drop the static `shared_index_expire` variable. It is only used in that
function, and furthermore we would only hit the code where we parse the
expiry date a single time because we already use a static `prepared`
variable to track whether we did parse it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `do_write_index()`, we use a `struct hashfile` to write the index
with a trailer hash. In case the write fails though, we never clean up
the allocated `hashfile` state and thus leak memory.
Refactor the code to have a common exit path where we can free this and
other allocated memory. While at it, refactor our use of `strbuf`s such
that we reuse the same buffer to avoid some unneeded allocations.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor `git_config_get_expiry()` to accept a `struct repository` such
that we can get rid of the implicit dependency on `the_repository`.
Rename the function accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor `git_config_get_max_percent_split_change()` to accept a `struct
repository` such that we can get rid of the implicit dependency on
`the_repository`. Rename the function accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor `git_config_get_split_index()` to accept a `struct repository`
such that we can get rid of the implicit dependency on `the_repository`.
Rename the function accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor `git_config_get_index_threads()` to accept a `struct
repository` such that we can get rid of the implicit dependency on
`the_repository`. Rename the function accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We implicitly depend on `the_repository` in our hook subsystem because
we use `strbuf_git_path()` to compute hook paths. Remove this dependency
by accepting a `struct repository` as parameter instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use of the `the_repository` variable is deprecated nowadays, and we
slowly but steadily convert the codebase to not use it anymore. Instead,
callers should be passing down the repository to work on via parameters.
It is hard though to prove that a given code unit does not use this
variable anymore. The most trivial case, merely demonstrating that there
is no direct use of `the_repository`, is already a bit of a pain during
code reviews as the reviewer needs to manually verify claims made by the
patch author. The bigger problem though is that we have many interfaces
that implicitly rely on `the_repository`.
Introduce a new `USE_THE_REPOSITORY_VARIABLE` macro that allows code
units to opt into usage of `the_repository`. The intent of this macro is
to demonstrate that a certain code unit does not use this variable
anymore, and to keep it from new dependencies on it in future changes,
be it explicit or implicit
For now, the macro only guards `the_repository` itself as well as
`the_hash_algo`. There are many more known interfaces where we have an
implicit dependency on `the_repository`, but those are not guarded at
the current point in time. Over time though, we should start to add
guards as required (or even better, just remove them).
Define the macro as required in our code units. As expected, most of our
code still relies on the global variable. Nearly all of our builtins
rely on the variable as there is no way yet to pass `the_repository` to
their entry point. For now, declare the macro in "biultin.h" to keep the
required changes at least a little bit more contained.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both functions `is_empty_{blob,tree}_oid()` use `the_repository` to
derive the hash function that shall be used. Require callers to pass in
the hash algorithm to get rid of this implicit dependency.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both `oidread()` and `oidclr()` use `the_repository` to derive the hash
function that shall be used. Require callers to pass in the hash
algorithm to get rid of this implicit dependency.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many of our hash functions have two variants, one receiving a `struct
git_hash_algo` and one that derives it via `the_repository`. Adapt all
of those functions to always require the hash algorithm as input and
drop the variants that do not accept one.
As those functions are now independent of `the_repository`, we can move
them from "hash.h" to "hash-ll.h".
Note that both in this and subsequent commits in this series we always
just pass `the_repository->hash_algo` as input even if it is obvious
that there is a repository in the context that we should be using the
hash from instead. This is done to be on the safe side and not introduce
any regressions. All callsites should eventually be amended to use a
repo passed via parameters, but this is outside the scope of this patch
series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The functions `is_empty_{blob,tree}_sha1()` are mostly unused, except
for a single callsite in "read-cache.c". Most callsites have long since
been converted to use the equivalents that accept a `struct object_id`
instead of a string.
Adapt the remaining callsite and drop those functions.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
