ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 406 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
new file mode 100644
index 000000000000..581b3ab5c4ca
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+#include <dt-bindings/clock/qcom,lcc-msm8960.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Qualcomm MSM8960";
+	compatible = "qcom,msm8960";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_PPI 14 0x304>;
+
+		cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+		};
+
+		cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <GIC_PPI 10 0x304>;
+		qcom,no-pc-write;
+	};
+
+	clocks {
+		cxo_board: cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "cxo_board";
+		};
+
+		pxo_board: pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+			clock-output-names = "pxo_board";
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	/* Temporary fixed regulator */
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+		regulator-always-on;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-wdt-msm8960", "qcom,kpss-timer",
+				     "qcom,msm-timer";
+			interrupts = <GIC_PPI 1 0x301>,
+				     <GIC_PPI 2 0x301>,
+				     <GIC_PPI 3 0x301>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <27000000>;
+			cpu-offset = <0x80000>;
+		};
+
+		msmgpio: pinctrl@800000 {
+			compatible = "qcom,msm8960-pinctrl";
+			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 152>;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x800000 0x4000>;
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-msm8960";
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x900000 0x4000>;
+			clocks = <&cxo_board>,
+				 <&pxo_board>,
+				 <&lcc PLL4>;
+			clock-names = "cxo", "pxo", "pll4";
+		};
+
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-msm8960";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&pxo_board>,
+				 <&gcc PLL4_VOTE>,
+				 <0>,
+				 <0>, <0>,
+				 <0>, <0>,
+				 <0>;
+			clock-names = "pxo",
+				      "pll4_vote",
+				      "mi2s_codec_clk",
+				      "codec_i2s_mic_codec_clk",
+				      "spare_i2s_mic_codec_clk",
+				      "codec_i2s_spkr_codec_clk",
+				      "spare_i2s_spkr_codec_clk",
+				      "pcm_codec_clk";
+		};
+
+		clock-controller@4000000 {
+			compatible = "qcom,mmcc-msm8960";
+			reg = <0x4000000 0x1000>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&pxo_board>,
+				 <&gcc PLL3>,
+				 <&gcc PLL8_VOTE>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "pxo",
+				      "pll3",
+				      "pll8_vote",
+				      "dsi1pll",
+				      "dsi1pllbyte",
+				      "dsi2pll",
+				      "dsi2pllbyte",
+				      "hdmipll";
+		};
+
+		l2cc: clock-controller@2011000 {
+			compatible = "qcom,kpss-gcc-msm8960", "qcom,kpss-gcc", "syscon";
+			reg = <0x2011000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			#clock-cells = <0>;
+		};
+
+		rpm: rpm@108000 {
+			compatible = "qcom,rpm-msm8960";
+			reg = <0x108000 0x1000>;
+			qcom,ipc = <&l2cc 0x8 2>;
+
+			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ack", "err", "wakeup";
+
+			regulators {
+				compatible = "qcom,rpm-pm8921-regulators";
+			};
+		};
+
+		acc0: clock-controller@2088000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu0_aux";
+			#clock-cells = <0>;
+		};
+
+		acc1: clock-controller@2098000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu1_aux";
+			#clock-cells = <0>;
+		};
+
+		saw0: regulator@2089000 {
+			compatible = "qcom,saw2";
+			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw1: regulator@2099000 {
+			compatible = "qcom,saw2";
+			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		gsbi5: gsbi@16400000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <5>;
+			reg = <0x16400000 0x100>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi5_serial: serial@16440000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16440000 0x1000>,
+				      <0x16400000 0x1000>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+
+			pmicintc: pmic {
+				compatible = "qcom,pm8921";
+				interrupt-parent = <&msmgpio>;
+				interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pwrkey@1c {
+					compatible = "qcom,pm8921-pwrkey";
+					reg = <0x1c>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
+						     <51 IRQ_TYPE_EDGE_RISING>;
+					debounce = <15625>;
+					pull-up;
+				};
+
+				keypad@148 {
+					compatible = "qcom,pm8921-keypad";
+					reg = <0x148>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <74 IRQ_TYPE_EDGE_RISING>,
+						     <75 IRQ_TYPE_EDGE_RISING>;
+					debounce = <15>;
+					scan-delay = <32>;
+					row-hold = <91500>;
+				};
+
+				rtc@11d {
+					compatible = "qcom,pm8921-rtc";
+					interrupt-parent = <&pmicintc>;
+					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
+					reg = <0x11d>;
+					allow-set-time;
+				};
+			};
+		};
+
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
+		};
+
+		sdcc3: mmc@12180000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x12180000 0x8000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <192000000>;
+			no-1-8-v;
+			vmmc-supply = <&vsdcc_fixed>;
+		};
+
+		sdcc1: mmc@12400000 {
+			status = "disabled";
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			reg = <0x12400000 0x8000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <8>;
+			max-frequency = <96000000>;
+			non-removable;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			vmmc-supply = <&vsdcc_fixed>;
+		};
+
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-msm8960", "syscon";
+			reg = <0x1a400000 0x100>;
+		};
+
+		gsbi1: gsbi@16000000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <1>;
+			reg = <0x16000000 0x100>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi1_spi: spi@16080000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16080000 0x1000>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <24000000>;
+				cs-gpios = <&msmgpio 8 0>;
+
+				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		usb1: usb@12500000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x12500000 0x200>,
+			      <0x12500200 0x200>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>;
+			clock-names = "core", "iface";
+			assigned-clocks = <&gcc USB_HS1_XCVR_CLK>;
+			assigned-clock-rates = <60000000>;
+			resets = <&gcc USB_HS1_RESET>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			ahb-burst-config = <0>;
+			phys = <&usb_hs1_phy>;
+			phy-names = "usb-phy";
+			#reset-cells = <1>;
+			status = "disabled";
+
+			ulpi {
+				usb_hs1_phy: phy {
+					compatible = "qcom,usb-hs-phy-msm8960",
+						     "qcom,usb-hs-phy";
+					clocks = <&sleep_clk>, <&cxo_board>;
+					clock-names = "sleep", "ref";
+					resets = <&usb1 0>;
+					reset-names = "por";
+					#phy-cells = <0>;
+				};
+			};
+		};
+	};
+};