Merge 6.12-rc3 into usb-next

We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 29 insertions, 0 deletions

diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index 268949939636..d246f95d57ec 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -6,6 +6,7 @@
 #include <linux/module.h>
 #include <linux/gpio/consumer.h>
 #include <linux/regmap.h>
+#include <linux/iopoll.h>
 #include <linux/mutex.h>
 #include <linux/mii.h>
 #include <linux/of.h>
@@ -839,6 +840,8 @@ static void lan9303_handle_reset(struct lan9303 *chip)
 	if (!chip->reset_gpio)
 		return;
 
+	gpiod_set_value_cansleep(chip->reset_gpio, 1);
+
 	if (chip->reset_duration != 0)
 		msleep(chip->reset_duration);
 
@@ -864,8 +867,34 @@ static int lan9303_disable_processing(struct lan9303 *chip)
 static int lan9303_check_device(struct lan9303 *chip)
 {
 	int ret;
+	int err;
 	u32 reg;
 
+	/* In I2C-managed configurations this polling loop will clash with
+	 * switch's reading of EEPROM right after reset and this behaviour is
+	 * not configurable. While lan9303_read() already has quite long retry
+	 * timeout, seems not all cases are being detected as arbitration error.
+	 *
+	 * According to datasheet, EEPROM loader has 30ms timeout (in case of
+	 * missing EEPROM).
+	 *
+	 * Loading of the largest supported EEPROM is expected to take at least
+	 * 5.9s.
+	 */
+	err = read_poll_timeout(lan9303_read, ret,
+				!ret && reg & LAN9303_HW_CFG_READY,
+				20000, 6000000, false,
+				chip->regmap, LAN9303_HW_CFG, &reg);
+	if (ret) {
+		dev_err(chip->dev, "failed to read HW_CFG reg: %pe\n",
+			ERR_PTR(ret));
+		return ret;
+	}
+	if (err) {
+		dev_err(chip->dev, "HW_CFG not ready: 0x%08x\n", reg);
+		return err;
+	}
+
 	ret = lan9303_read(chip->regmap, LAN9303_CHIP_REV, &reg);
 	if (ret) {
 		dev_err(chip->dev, "failed to read chip revision register: %d\n",