Merge branch 'bpf-add-gen_epilogue-to-bpf_verifier_ops'

Martin KaFai Lau says:

====================
bpf: Add gen_epilogue to bpf_verifier_ops

From: Martin KaFai Lau <martin.lau@kernel.org>

This set allows the subsystem to patch codes before BPF_EXIT.
The verifier ops, .gen_epilogue, is added for this purpose.
One of the use case will be in the bpf qdisc, the bpf qdisc
subsystem can ensure the skb->dev is in the correct value.
The bpf qdisc subsystem can either inline fixing it in the
epilogue or call another kernel function to handle it (e.g. drop)
in the epilogue. Another use case could be in bpf_tcp_ca.c to
enforce snd_cwnd has valid value (e.g. positive value).

v5:
 * Removed the skip_cnt argument from adjust_jmp_off() in patch 2.
   Instead, reuse the delta argument and skip
   the [tgt_idx, tgt_idx + delta) instructions.
 * Added a BPF_JMP32_A macro in patch 3.
 * Removed pro_epilogue_subprog.c in patch 6.
   The pro_epilogue_kfunc.c has covered the subprog case.
   Renamed the file pro_epilogue_kfunc.c to pro_epilogue.c.
   Some of the SEC names and function names are changed
   accordingly (mainly shorten them by removing the _kfunc suffix).
 * Added comments to explain the tail_call result in patch 7.
 * Fixed the following bpf CI breakages. I ran it in CI
   manually to confirm:
   https://github.com/kernel-patches/bpf/actions/runs/10590714532
 * s390 zext added "w3 = w3". Adjusted the test to
   use all ALU64 and BPF_DW to avoid zext.
   Also changed the "int a" in the "struct st_ops_args" to "u64 a".
 * llvm17 does not take:
       *(u64 *)(r1 +0) = 0;
   so it is changed to:
       r3 = 0;
       *(u64 *)(r1 +0) = r3;

v4:
 * Fixed a bug in the memcpy in patch 3
   The size in the memcpy should be
   epilogue_cnt * sizeof(*epilogue_buf)

v3:
 * Moved epilogue_buf[16] to env.
   Patch 1 is added to move the existing insn_buf[16] to env.
 * Fixed a case that the bpf prog has a BPF_JMP that goes back
   to the first instruction of the main prog.
   The jump back to 1st insn case also applies to the prologue.
   Patch 2 is added to handle it.
 * If the bpf main prog has multiple BPF_EXIT, use a BPF_JA
   to goto the earlier patched epilogue.
   Note that there are (BPF_JMP32 | BPF_JA) vs (BPF_JMP | BPF_JA)
   details in the patch 3 commit message.
 * There are subtle changes in patch 3, so I reset the Reviewed-by.
 * Added patch 8 and patch 9 to cover the changes in patch 2 and patch 3.
 * Dropped the kfunc call from pro/epilogue and its selftests.

v2:
 * Remove the RFC tag. Keep the ordering at where .gen_epilogue is
   called in the verifier relative to the check_max_stack_depth().
   This will be consistent with the other extra stack_depth
   usage like optimize_bpf_loop().
 * Use __xlated check provided by the test_loader to
   check the patched instructions after gen_pro/epilogue (Eduard).
 * Added Patch 3 by Eduard (Thanks!).
====================

Link: https://lore.kernel.org/r/20240829210833.388152-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

2 files changed, 60 insertions, 8 deletions

diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c
index 7e7761c537f8..3956be5d6440 100644
--- a/kernel/bpf/helpers.c
+++ b/kernel/bpf/helpers.c
@@ -2034,6 +2034,7 @@ bpf_base_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
 		return NULL;
 	}
 }
+EXPORT_SYMBOL_GPL(bpf_base_func_proto);
 
 void bpf_list_head_free(const struct btf_field *field, void *list_head,
 			struct bpf_spin_lock *spin_lock)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index f32e3b9bb4e5..fdb1d39c8b58 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -19286,6 +19286,9 @@ static int adjust_jmp_off(struct bpf_prog *prog, u32 tgt_idx, u32 delta)
 	for (i = 0; i < insn_cnt; i++, insn++) {
 		u8 code = insn->code;
 
+		if (tgt_idx <= i && i < tgt_idx + delta)
+			continue;
+
 		if ((BPF_CLASS(code) != BPF_JMP && BPF_CLASS(code) != BPF_JMP32) ||
 		    BPF_OP(code) == BPF_CALL || BPF_OP(code) == BPF_EXIT)
 			continue;
@@ -19674,14 +19677,39 @@ apply_patch_buffer:
  */
 static int convert_ctx_accesses(struct bpf_verifier_env *env)
 {
+	struct bpf_subprog_info *subprogs = env->subprog_info;
 	const struct bpf_verifier_ops *ops = env->ops;
-	int i, cnt, size, ctx_field_size, delta = 0;
+	int i, cnt, size, ctx_field_size, delta = 0, epilogue_cnt = 0;
 	const int insn_cnt = env->prog->len;
-	struct bpf_insn insn_buf[16], *insn;
+	struct bpf_insn *epilogue_buf = env->epilogue_buf;
+	struct bpf_insn *insn_buf = env->insn_buf;
+	struct bpf_insn *insn;
 	u32 target_size, size_default, off;
 	struct bpf_prog *new_prog;
 	enum bpf_access_type type;
 	bool is_narrower_load;
+	int epilogue_idx = 0;
+
+	if (ops->gen_epilogue) {
+		epilogue_cnt = ops->gen_epilogue(epilogue_buf, env->prog,
+						 -(subprogs[0].stack_depth + 8));
+		if (epilogue_cnt >= INSN_BUF_SIZE) {
+			verbose(env, "bpf verifier is misconfigured\n");
+			return -EINVAL;
+		} else if (epilogue_cnt) {
+			/* Save the ARG_PTR_TO_CTX for the epilogue to use */
+			cnt = 0;
+			subprogs[0].stack_depth += 8;
+			insn_buf[cnt++] = BPF_STX_MEM(BPF_DW, BPF_REG_FP, BPF_REG_1,
+						      -subprogs[0].stack_depth);
+			insn_buf[cnt++] = env->prog->insnsi[0];
+			new_prog = bpf_patch_insn_data(env, 0, insn_buf, cnt);
+			if (!new_prog)
+				return -ENOMEM;
+			env->prog = new_prog;
+			delta += cnt - 1;
+		}
+	}
 
 	if (ops->gen_prologue || env->seen_direct_write) {
 		if (!ops->gen_prologue) {
@@ -19690,7 +19718,7 @@ static int convert_ctx_accesses(struct bpf_verifier_env *env)
 		}
 		cnt = ops->gen_prologue(insn_buf, env->seen_direct_write,
 					env->prog);
-		if (cnt >= ARRAY_SIZE(insn_buf)) {
+		if (cnt >= INSN_BUF_SIZE) {
 			verbose(env, "bpf verifier is misconfigured\n");
 			return -EINVAL;
 		} else if (cnt) {
@@ -19703,6 +19731,9 @@ static int convert_ctx_accesses(struct bpf_verifier_env *env)
 		}
 	}
 
+	if (delta)
+		WARN_ON(adjust_jmp_off(env->prog, 0, delta));
+
 	if (bpf_prog_is_offloaded(env->prog->aux))
 		return 0;
 
@@ -19735,6 +19766,25 @@ static int convert_ctx_accesses(struct bpf_verifier_env *env)
 			insn->code = BPF_STX | BPF_PROBE_ATOMIC | BPF_SIZE(insn->code);
 			env->prog->aux->num_exentries++;
 			continue;
+		} else if (insn->code == (BPF_JMP | BPF_EXIT) &&
+			   epilogue_cnt &&
+			   i + delta < subprogs[1].start) {
+			/* Generate epilogue for the main prog */
+			if (epilogue_idx) {
+				/* jump back to the earlier generated epilogue */
+				insn_buf[0] = BPF_JMP32_A(epilogue_idx - i - delta - 1);
+				cnt = 1;
+			} else {
+				memcpy(insn_buf, epilogue_buf,
+				       epilogue_cnt * sizeof(*epilogue_buf));
+				cnt = epilogue_cnt;
+				/* epilogue_idx cannot be 0. It must have at
+				 * least one ctx ptr saving insn before the
+				 * epilogue.
+				 */
+				 epilogue_idx = i + delta;
+			}
+			goto patch_insn_buf;
 		} else {
 			continue;
 		}
@@ -19837,7 +19887,7 @@ static int convert_ctx_accesses(struct bpf_verifier_env *env)
 		target_size = 0;
 		cnt = convert_ctx_access(type, insn, insn_buf, env->prog,
 					 &target_size);
-		if (cnt == 0 || cnt >= ARRAY_SIZE(insn_buf) ||
+		if (cnt == 0 || cnt >= INSN_BUF_SIZE ||
 		    (ctx_field_size && !target_size)) {
 			verbose(env, "bpf verifier is misconfigured\n");
 			return -EINVAL;
@@ -19846,7 +19896,7 @@ static int convert_ctx_accesses(struct bpf_verifier_env *env)
 		if (is_narrower_load && size < target_size) {
 			u8 shift = bpf_ctx_narrow_access_offset(
 				off, size, size_default) * 8;
-			if (shift && cnt + 1 >= ARRAY_SIZE(insn_buf)) {
+			if (shift && cnt + 1 >= INSN_BUF_SIZE) {
 				verbose(env, "bpf verifier narrow ctx load misconfigured\n");
 				return -EINVAL;
 			}
@@ -19871,6 +19921,7 @@ static int convert_ctx_accesses(struct bpf_verifier_env *env)
 						       insn->dst_reg, insn->dst_reg,
 						       size * 8, 0);
 
+patch_insn_buf:
 		new_prog = bpf_patch_insn_data(env, i + delta, insn_buf, cnt);
 		if (!new_prog)
 			return -ENOMEM;
@@ -20391,7 +20442,7 @@ static int do_misc_fixups(struct bpf_verifier_env *env)
 	const int insn_cnt = prog->len;
 	const struct bpf_map_ops *ops;
 	struct bpf_insn_aux_data *aux;
-	struct bpf_insn insn_buf[16];
+	struct bpf_insn *insn_buf = env->insn_buf;
 	struct bpf_prog *new_prog;
 	struct bpf_map *map_ptr;
 	int i, ret, cnt, delta = 0, cur_subprog = 0;
@@ -20510,7 +20561,7 @@ static int do_misc_fixups(struct bpf_verifier_env *env)
 		    (BPF_MODE(insn->code) == BPF_ABS ||
 		     BPF_MODE(insn->code) == BPF_IND)) {
 			cnt = env->ops->gen_ld_abs(insn, insn_buf);
-			if (cnt == 0 || cnt >= ARRAY_SIZE(insn_buf)) {
+			if (cnt == 0 || cnt >= INSN_BUF_SIZE) {
 				verbose(env, "bpf verifier is misconfigured\n");
 				return -EINVAL;
 			}
@@ -20803,7 +20854,7 @@ static int do_misc_fixups(struct bpf_verifier_env *env)
 				cnt = ops->map_gen_lookup(map_ptr, insn_buf);
 				if (cnt == -EOPNOTSUPP)
 					goto patch_map_ops_generic;
-				if (cnt <= 0 || cnt >= ARRAY_SIZE(insn_buf)) {
+				if (cnt <= 0 || cnt >= INSN_BUF_SIZE) {
 					verbose(env, "bpf verifier is misconfigured\n");
 					return -EINVAL;
 				}