Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...

1 files changed, 95 insertions, 24 deletions

diff --git a/net/dsa/tag_brcm.c b/net/dsa/tag_brcm.c
index fe75821623a4..26bb657ceac3 100644
--- a/net/dsa/tag_brcm.c
+++ b/net/dsa/tag_brcm.c
@@ -15,6 +15,7 @@
 
 #define BRCM_NAME		"brcm"
 #define BRCM_LEGACY_NAME	"brcm-legacy"
+#define BRCM_LEGACY_FCS_NAME	"brcm-legacy-fcs"
 #define BRCM_PREPEND_NAME	"brcm-prepend"
 
 /* Legacy Broadcom tag (6 bytes) */
@@ -32,6 +33,10 @@
 #define BRCM_LEG_MULTICAST	(1 << 5)
 #define BRCM_LEG_EGRESS		(2 << 5)
 #define BRCM_LEG_INGRESS	(3 << 5)
+#define BRCM_LEG_LEN_HI(x)	(((x) >> 8) & 0x7)
+
+/* 4th byte in the tag */
+#define BRCM_LEG_LEN_LO(x)	((x) & 0xff)
 
 /* 6th byte in the tag */
 #define BRCM_LEG_PORT_ID	(0xf)
@@ -212,6 +217,41 @@ DSA_TAG_DRIVER(brcm_netdev_ops);
 MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_BRCM, BRCM_NAME);
 #endif
 
+#if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY) || \
+	IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY_FCS)
+static struct sk_buff *brcm_leg_tag_rcv(struct sk_buff *skb,
+					struct net_device *dev)
+{
+	int len = BRCM_LEG_TAG_LEN;
+	int source_port;
+	u8 *brcm_tag;
+
+	if (unlikely(!pskb_may_pull(skb, BRCM_LEG_TAG_LEN + VLAN_HLEN)))
+		return NULL;
+
+	brcm_tag = dsa_etype_header_pos_rx(skb);
+
+	source_port = brcm_tag[5] & BRCM_LEG_PORT_ID;
+
+	skb->dev = dsa_conduit_find_user(dev, 0, source_port);
+	if (!skb->dev)
+		return NULL;
+
+	/* VLAN tag is added by BCM63xx internal switch */
+	if (netdev_uses_dsa(skb->dev))
+		len += VLAN_HLEN;
+
+	/* Remove Broadcom tag and update checksum */
+	skb_pull_rcsum(skb, len);
+
+	dsa_default_offload_fwd_mark(skb);
+
+	dsa_strip_etype_header(skb, len);
+
+	return skb;
+}
+#endif /* CONFIG_NET_DSA_TAG_BRCM_LEGACY || CONFIG_NET_DSA_TAG_BRCM_LEGACY_FCS */
+
 #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY)
 static struct sk_buff *brcm_leg_tag_xmit(struct sk_buff *skb,
 					 struct net_device *dev)
@@ -250,49 +290,77 @@ static struct sk_buff *brcm_leg_tag_xmit(struct sk_buff *skb,
 	return skb;
 }
 
-static struct sk_buff *brcm_leg_tag_rcv(struct sk_buff *skb,
-					struct net_device *dev)
+static const struct dsa_device_ops brcm_legacy_netdev_ops = {
+	.name = BRCM_LEGACY_NAME,
+	.proto = DSA_TAG_PROTO_BRCM_LEGACY,
+	.xmit = brcm_leg_tag_xmit,
+	.rcv = brcm_leg_tag_rcv,
+	.needed_headroom = BRCM_LEG_TAG_LEN,
+};
+
+DSA_TAG_DRIVER(brcm_legacy_netdev_ops);
+MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_BRCM_LEGACY, BRCM_LEGACY_NAME);
+#endif /* CONFIG_NET_DSA_TAG_BRCM_LEGACY */
+
+#if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY_FCS)
+static struct sk_buff *brcm_leg_fcs_tag_xmit(struct sk_buff *skb,
+					     struct net_device *dev)
 {
-	int len = BRCM_LEG_TAG_LEN;
-	int source_port;
+	struct dsa_port *dp = dsa_user_to_port(dev);
+	unsigned int fcs_len;
+	__le32 fcs_val;
 	u8 *brcm_tag;
 
-	if (unlikely(!pskb_may_pull(skb, BRCM_LEG_TAG_LEN + VLAN_HLEN)))
+	/* The Ethernet switch we are interfaced with needs packets to be at
+	 * least 64 bytes (including FCS) otherwise they will be discarded when
+	 * they enter the switch port logic. When Broadcom tags are enabled, we
+	 * need to make sure that packets are at least 70 bytes (including FCS
+	 * and tag) because the length verification is done after the Broadcom
+	 * tag is stripped off the ingress packet.
+	 *
+	 * Let dsa_user_xmit() free the SKB.
+	 */
+	if (__skb_put_padto(skb, ETH_ZLEN + BRCM_LEG_TAG_LEN, false))
 		return NULL;
 
-	brcm_tag = dsa_etype_header_pos_rx(skb);
+	fcs_len = skb->len;
+	fcs_val = cpu_to_le32(crc32_le(~0, skb->data, fcs_len) ^ ~0);
 
-	source_port = brcm_tag[5] & BRCM_LEG_PORT_ID;
+	skb_push(skb, BRCM_LEG_TAG_LEN);
 
-	skb->dev = dsa_conduit_find_user(dev, 0, source_port);
-	if (!skb->dev)
-		return NULL;
+	dsa_alloc_etype_header(skb, BRCM_LEG_TAG_LEN);
 
-	/* VLAN tag is added by BCM63xx internal switch */
-	if (netdev_uses_dsa(skb->dev))
-		len += VLAN_HLEN;
+	brcm_tag = skb->data + 2 * ETH_ALEN;
 
-	/* Remove Broadcom tag and update checksum */
-	skb_pull_rcsum(skb, len);
+	/* Broadcom tag type */
+	brcm_tag[0] = BRCM_LEG_TYPE_HI;
+	brcm_tag[1] = BRCM_LEG_TYPE_LO;
 
-	dsa_default_offload_fwd_mark(skb);
+	/* Broadcom tag value */
+	brcm_tag[2] = BRCM_LEG_EGRESS | BRCM_LEG_LEN_HI(fcs_len);
+	brcm_tag[3] = BRCM_LEG_LEN_LO(fcs_len);
+	brcm_tag[4] = 0;
+	brcm_tag[5] = dp->index & BRCM_LEG_PORT_ID;
 
-	dsa_strip_etype_header(skb, len);
+	/* Original FCS value */
+	if (__skb_pad(skb, ETH_FCS_LEN, false))
+		return NULL;
+	skb_put_data(skb, &fcs_val, ETH_FCS_LEN);
 
 	return skb;
 }
 
-static const struct dsa_device_ops brcm_legacy_netdev_ops = {
-	.name = BRCM_LEGACY_NAME,
-	.proto = DSA_TAG_PROTO_BRCM_LEGACY,
-	.xmit = brcm_leg_tag_xmit,
+static const struct dsa_device_ops brcm_legacy_fcs_netdev_ops = {
+	.name = BRCM_LEGACY_FCS_NAME,
+	.proto = DSA_TAG_PROTO_BRCM_LEGACY_FCS,
+	.xmit = brcm_leg_fcs_tag_xmit,
 	.rcv = brcm_leg_tag_rcv,
 	.needed_headroom = BRCM_LEG_TAG_LEN,
 };
 
-DSA_TAG_DRIVER(brcm_legacy_netdev_ops);
-MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_BRCM_LEGACY, BRCM_LEGACY_NAME);
-#endif /* CONFIG_NET_DSA_TAG_BRCM_LEGACY */
+DSA_TAG_DRIVER(brcm_legacy_fcs_netdev_ops);
+MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_BRCM_LEGACY_FCS, BRCM_LEGACY_FCS_NAME);
+#endif /* CONFIG_NET_DSA_TAG_BRCM_LEGACY_FCS */
 
 #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_PREPEND)
 static struct sk_buff *brcm_tag_xmit_prepend(struct sk_buff *skb,
@@ -328,6 +396,9 @@ static struct dsa_tag_driver *dsa_tag_driver_array[] =	{
 #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY)
 	&DSA_TAG_DRIVER_NAME(brcm_legacy_netdev_ops),
 #endif
+#if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY_FCS)
+	&DSA_TAG_DRIVER_NAME(brcm_legacy_fcs_netdev_ops),
+#endif
 #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_PREPEND)
 	&DSA_TAG_DRIVER_NAME(brcm_prepend_netdev_ops),
 #endif