aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/stackcollapse.py
diff options
context:
space:
mode:
authorDaniel Vetter <daniel.vetter@ffwll.ch>2017-05-31 10:38:13 +0200
committerDaniel Vetter <daniel.vetter@ffwll.ch>2017-05-31 16:35:45 +0200
commit869e188a35c93f1bad7bf16c32f34a6feb5f79f1 (patch)
treeda620b7135f48548b9d7ce89a4985cc17917e7b7 /tools/perf/scripts/python/stackcollapse.py
parentdrm/rockchip: Correct vop out_mode configure (diff)
downloadlinux-869e188a35c93f1bad7bf16c32f34a6feb5f79f1.tar.gz
linux-869e188a35c93f1bad7bf16c32f34a6feb5f79f1.zip
drm: Fix locking in drm_atomic_helper_resume
In the conversion to drop drm_modeset_lock_all and the magic implicit context I failed to realize that _resume starts out with a pile of state copies, but not with the locks. And hence drm_atomic_commit won't grab these for us. v2: Add locking checks in helpers to make sure we catch this in the future. Note we can only require the locks in the atomic_check phase, not in the commit phase. But since any commit is guaranteed to first run the checks (even for the resume stuff where we use stored duplicated old state) this should give us full coverage. Requested by Maarten. Cc: Jyri Sarha <jsarha@ti.com> Fixes: a5b8444e289c ("drm/atomic-helper: remove modeset_lock_all from helper_resume") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170531083813.1390-1-daniel.vetter@ffwll.ch
Diffstat (limited to 'tools/perf/scripts/python/stackcollapse.py')
0 files changed, 0 insertions, 0 deletions
add support for selftests.Sudarsana Reddy Kalluru1-1/+55 This patch adds the qede ethtool support for the following tests: - interrupt test - memory test - register test - clock test Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-05-02qed: add infrastructure for device self tests.Sudarsana Reddy Kalluru10-1/+301 This patch adds the functionality and APIs needed for selftests. It adds the ability to configure the link-mode which is required for the implementation of loopback tests. It adds the APIs for clock test, register test, interrupt test and memory test. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-05-02net: dsa: mv88e6xxx: replace ds with ps where possibleAndrew Lunn6-494/+511 The dsa_switch structure ds is actually needed in very few places, mostly during setup of the switch. The private structure ps is however needed nearly everywhere. Pass ps, not ds internally. [vd: rebased Andrew's patch.] Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-05-01sctp: signal sk_data_ready earlier on data chunks receptionMarcelo Ricardo Leitner3-14/+20 Dave Miller pointed out that fb586f25300f ("sctp: delay calls to sk_data_ready() as much as possible") may insert latency specially if the receiving application is running on another CPU and that it would be better if we signalled as early as possible. This patch thus basically inverts the logic on fb586f25300f and signals it as early as possible, similar to what we had before. Fixes: fb586f25300f ("sctp: delay calls to sk_data_ready() as much as possible") Reported-by: Dave Miller <davem@davemloft.net> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-05-01mdio_bus: Fix MDIO bus scanning in __mdiobus_register()Marek Vasut1-1/+1 Since commit b74766a0a0fe ("phylib: don't return NULL from get_phy_device()") in linux-next, phy_get_device() will return ERR_PTR(-ENODEV) instead of NULL if the PHY device ID is all ones. This causes problem with stmmac driver and likely some other drivers which call mdiobus_register(). I triggered this bug on SoCFPGA MCVEVK board with linux-next 20160427 and 20160428. In case of the stmmac, if there is no PHY node specified in the DT for the stmmac block, the stmmac driver ( drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c function stmmac_mdio_register() ) will call mdiobus_register() , which will register the MDIO bus and probe for the PHY. The mdiobus_register() resp. __mdiobus_register() iterates over all of the addresses on the MDIO bus and calls mdiobus_scan() for each of them, which invokes get_phy_device(). Before the aforementioned patch, the mdiobus_scan() would return NULL if no PHY was found on a given address and mdiobus_register() would continue and try the next PHY address. Now, mdiobus_scan() returns ERR_PTR(-ENODEV), which is caught by the 'if (IS_ERR(phydev))' condition and the loop exits immediately if the PHY address does not contain PHY. Repair this by explicitly checking for the ERR_PTR(-ENODEV) and if this error comes around, continue with the next PHY address. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-05-01i40e/i40evf: Add support for GSO partial with UDP_TUNNEL_CSUM and GRE_CSUMAlexander Duyck4-6/+28 This patch makes it so that i40e and i40evf can use GSO_PARTIAL to support segmentation for frames with checksums enabled in outer headers. As a result we can now send data over these types of tunnels at over 20Gb/s versus the 12Gb/s that was previously possible on my system. The advantage with the i40e parts is that this offload is mostly transparent as the hardware still deals with the inner and/or outer IPv4 headers so the IP ID is still incrementing for both when this offload is performed. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 2016-05-01i40evf: make use of BIT() macro to avoid signed left shiftJacob Keller1-22/+22 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 2016-05-01i40e: make use of BIT() macro to prevent left shift of signed valuesJacob Keller1-28/+25 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 2016-05-01i40e/i40evf: fix I40E_MASK signed shift overflow warningsJacob Keller2-2/+2 GCC 6 has a new warning which will display when you attempt to left shift a signed value beyond the storage size of the type. I40E_MASK generates a mask value for 32bit registers. Properly typecast the mask value and place the values in parenthesis to prevent macro expansion issues. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 2016-05-01i40e/i40evf : Bump driver version from 1.5.5 to 1.5.10Harshitha Ramamurthy2-2/+2 Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 2016-05-01i40e: Update device ids for X722Catherine Sullivan1-0/+1 Add a device ID for X722. Change-Id: I574f2345ab341de98a6a1c212d0603af853e48b0 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 2016-05-01i40e: Drop extra copy of functionJesse Brandeburg1-18/+0 i40e_release_rx_desc was in two files, but was only used and needed in txrx.c. Get rid of the extra copy. Change-Id: I86e18239aa03531fc198b6c052847475084a9200 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 2016-05-01i40e: Use consistent type for vf_idJesse Brandeburg3-9/+10 The driver was all over the place using signed or unsigned types for vf_id, when it should always be signed. This fixes warnings of type unsafe comparisons from gcc with W=2. Change-Id: I2cb681f83d0f68ca124d2e4131e4ac0d9f8a6b22 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 2016-05-01i40e: PTP - avoid aggregate return warningsJesse Brandeburg1-1/+2 Aggregate return warnings are when struct types are returned and must be copied to the lvalue with a struct copy by the compiler. This fixes warnings of type aggregate-return from gcc with W=2. Change-Id: I896b1bf514544bf0faeb458869d79914b9f1b168 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 2016-05-01i40e: Fix uninitialized variableCatherine Sullivan1-5/+1 We have an uninitialized variable warning for valid_len for one case in validate_vf_mesg. To fix this, just initialize it to 0 at the top of the function and remove all of the now redundant assignments to 0 in the individual cases. Change-Id: Iacbd97f4c521ed8d662eef803a598d8707708cfd Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 2016-05-01i40evf: RSS Hash Option parametersCarolyn Wyborny1-199/+2 This patch syncs the VF code for the changes made to the PF for the RSS hash tuple settings. Since the VF still cannot change the RSS hash settings, change the code to make this clear to the user. Previously, the default settings were returned in this function. However, the default can be changed by the PF so this does not make sense anymore. Change-Id: I085eaf005fc7978b440d2a1bf2b2dd7cadaff39b Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 2016-05-01i40e: Remove HMC AQ API implementationNeerav Parikh5-88/+0 Remove the code that implements the HMC AQ APIs and call these APIs. This is done because these are obsolete APIs and are not supported by firmware. Change-ID: I5d771d8f37c3e16e7b0a972ff9b27e75aa2d05d4 Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 2016-05-01i40e: Prevent falling to promiscuous if the VF is not trustedAnjali Singhai Jain1-0/+6 With this change a non trusted VF can never fall to promiscuous mode when there is no room for a MAC/VLAN filter. Change-Id: I8a155aa25c0bcdc6093414920c9ade4ee0bd20e8 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 2016-05-01i40e: Limit the number of MAC and VLAN addresses that can be added for VFsAnjali Singhai Jain2-2/+26 If the VF is privileged/trusted it can do as it may please including but not limited to hogging resources and playing unfair. But if the VF is not privileged/trusted it still can add some number (8) of MAC and VLAN addresses. Other restrictions with respect to Port VLAN and normal VLAN still apply to not privileged/trusted VF. Change-Id: I3a9529201b184c8873e1ad2e300aff468c9e6296 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 2016-05-01tipc: set 'active' state correctly for first established linkJon Paul Maloy1-0/+1 When we are displaying statistics for the first link established between two peers, it will always be presented as STANDBY although it in reality is ACTIVE. This happens because we forget to set the 'active' flag in the link instance at the moment it is established. Although this is a bug, it only has impact on the presentation view of the link, not on its actual functionality. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-05-01of: of_mdio: Check if MDIO bus controller is availableFlorian Fainelli1-0/+4 Add a check whether the 'struct device_node' pointer passed to of_mdiobus_register() is an available (aka enabled) node in the Device Tree. Rationale for doing this are cases where an Ethernet MAC provides a MDIO bus controller and node, and an additional Ethernet MAC might be connecting its PHY/switches to that first MDIO bus controller, while still embedding one internally which is therefore marked as "disabled". Instead of sprinkling checks like these in callers of of_mdiobus_register(), do this in a central location. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-05-01i40e: Change the default for VFs to be not privilegedAnjali Singhai Jain1-10/+10 Make sure a VF is not trusted/privileged until its explicitly set for trust through the new NDO op interface. Change-Id: I476385c290d2b4901d8fceb29de43546accdc499 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 2016-04-29net/mlx5e: Enabling aRFS mechanismMaor Gottlieb4-2/+127 Accelerated RFS requires that ntuple filtering is enabled via ethtool and driver supports ndo_rx_flow_steer. When the ntuple filtering is enabled, we modify the l3_l4 ttc rules to point on the aRFS flow tables and when the filtering is disabled, we modify the l3_l4 ttc rules to point on the RSS TIRs. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-04-29net/mlx5e: Add accelerated RFS supportMaor Gottlieb2-1/+436 Implement ndo_rx_flow_steer ndo. A new flow steering rule will be composed from the skb 4-tuple and added to the hardware aRFS flow table. Each rule is stored in an internal hash table, if such skb 4-tuple rule already exists we update the corresponding hardware steering rule with the new destination. For garbage collection rps_may_expire_flow will be invoked for a limited amount of old rules upon any ndo_rx_flow_steer invocation. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-04-29net/mlx5e: Create aRFS flow tablesMaor Gottlieb6-14/+313 Create the following four flow tables for aRFS usage: 1. IPv4 TCP - filtering 4-tuple of IPv4 TCP packets. 2. IPv6 TCP - filtering 4-tuple of IPv6 TCP packets. 3. IPv4 UDP - filtering 4-tuple of IPv4 UDP packets. 4. IPv6 UDP - filtering 4-tuple of IPv6 UDP packets. Each flow table has two flow groups: one for the 4-tuple filtering (full match) and the other contains * rule for miss rule. Full match rule means a hit for aRFS and packet will be forwarded to the dedicated RQ/Core, miss rule packets will be forwarded to default RSS hashing. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-04-29net/mlx5: Initializing CPU reverse mappingMaor Gottlieb3-0/+24 Allocating CPU rmap and add entry for each IRQ. CPU rmap is used in aRFS to get the RX queue number of the RX completion interrupts. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-04-29net/mlx5e: Split the main flow steering tableMaor Gottlieb4-563/+462 Currently, the main flow table is used for two purposes: One is to do mac filtering and the other is to classify the packet l3-l4 header in order to steer the packet to the right RSS TIR. This design is very complex, for each configured mac address we have to add eleven rules (rule for each traffic type), the same if the device is put to promiscuous/allmulti mode. This scheme isn't scalable for future features like aRFS. In order to simplify it, the main flow table is split to two flow tables: 1. l2 table - filter the packet dmac address, if there is a match we forward to the ttc flow table. 2. TTC (Traffic Type Classifier) table - classify the traffic type of the packet and steer the packet to the right TIR. In this new design, when new mac address is added, the driver adds only one flow rule instead of eleven. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-04-29net/mlx5e: Refactor mlx5e flow steering structsMaor Gottlieb5-154/+160 Slightly refactor and re-order the flow steering structs, tables and data-bases for better self-containment and flexibility to add more future steering phases (tables/rules/data bases) e.g: aRFS. Changes: 1. Move the vlan DB and address DB into their table structs. 2. Rename steering table structs to unique format: mlx5e_*_table, e.g: mlx5e_vlan_table. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-04-29net/mlx5: Support different attributes for priorities in namespaceMaor Gottlieb1-12/+19 Currently, namespace could be initialized only with priorities with the same attributes. Add support to initialize namespace with priorities with different attributes(e.g. different number of levels). Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-04-29net/mlx5: Add user chosen levels when allocating flow tablesMaor Gottlieb6-40/+70 Currently, consumers of the flow steering infrastructure can't choose their own flow table levels and are limited to one flow table per level. This just waste levels. Instead, we introduce here the possibility to use multiple flow tables in a level. The user is free to connect these flow tables, while following the rule (FTEs in FT of level x could only point to FTs of level y where y > x). In addition this patch switch the order of the create/destroy flow tables of the NIC(vlan and main). Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-04-29net/mlx5: Set number of allowed levels in priorityMaor Gottlieb2-30/+33 Refactors the flow steering namespace creation, by changing the name num_fts to num_levels. When new flow table is created, the driver assign new level to this flow table therefore the meaning is equivalent. Since downstream patches will introduce the ability to create more than one flow table per level, the name num_fts is no longer accurate. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-04-29net/mlx5: Introduce modify flow rule destinationMaor Gottlieb2-2/+5 This API is used for modifying the flow rule destination. This is needed for modifying the pointed flow table by the traffic type classifier rules to point on the aRFS tables. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-04-29net/mlx5e: Direct TIR per RQTariq Toukan4-138/+191 Introduce new TIRs for direct access per RQ. Now we have 2 available kinds of TIRs: - indirect TIR per traffic type, each points to one RQT (RSS RQT) same as before. - New direct TIR per RQ, each points to RQT with a size of one that forwards packets to that RQ only. Driver will open max channels (num cores) direct TIRs by default, they will be filled with the actual RQs once channels are allocated. Needed for downstream aRFS and ethtool direct steering functionalities. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-04-29net/mlx5e: Call vxlan_get_rx_port() with rtnl lockMatthew Finlay1-1/+4 Hold the rtnl lock when calling vxlan_get_rx_port(). Fixes: b7aade15485a ("vxlan: break dependency with netdev drivers") Signed-off-by: Matthew Finlay <matt@mellanox.com> Reported-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-04-29net: ethernet: enc28j60: add device tree supportMichael Heimpold2-3/+76 The following patch adds the required match table for device tree support (and while at, fix the indent). It's also possible to specify the MAC address in the DT blob. Also add the corresponding binding documentation file. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-04-29net: ethernet: enc28j60: support half-duplex SPI controllersMichael Heimpold1-5/+9 The current spi_read_buf function fails on SPI host masters which are only half-duplex capable. Splitting the Tx and Rx part solves this issue. Tested on Raspberry Pi (full duplex) and I2SE Duckbill (half duplex). Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-04-29net: constify is_skb_forwardable's argumentsNikolay Aleksandrov2-2/+3 is_skb_forwardable is not supposed to change anything so constify its arguments Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-04-29ppp: add rtnetlink device creation supportGuillaume Nault2-3/+120 Define PPP device handler for use with rtnetlink. The only PPP specific attribute is IFLA_PPP_DEV_FD. It is mandatory and contains the file descriptor of the associated /dev/ppp instance (the file descriptor which would have been used for ioctl(PPPIOCNEWUNIT) in the ioctl-based API). The PPP device is removed when this file descriptor is released (same behaviour as with ioctl based PPP devices). PPP devices created with the rtnetlink API behave like the ones created with ioctl(PPPIOCNEWUNIT). In particular existing ioctls work the same way, no matter how the PPP device was created. The rtnl callbacks are also assigned to ioctl based PPP devices. This way, rtnl messages have the same effect on any PPP devices. The immediate effect is that all PPP devices, even ioctl-based ones, can now be removed with "ip link del". A minor difference still exists between ioctl and rtnl based PPP interfaces: in the device name, the number following the "ppp" prefix corresponds to the PPP unit number for ioctl based devices, while it is just an unrelated incrementing index for rtnl ones. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-04-29ppp: define reusable device creation functionsGuillaume Nault1-88/+118 Move PPP device initialisation and registration out of ppp_create_interface(). This prepares code for device registration with rtnetlink. While there, simplify the prototype of ppp_create_interface(): * Since ppp_dev_configure() takes care of setting file->private_data, there's no need to return a ppp structure to ppp_unattached_ioctl() anymore. * The unit parameter is made read/write so that ppp_create_interface() can tell which unit number has been assigned. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-04-29net: ethernet: stmmac: update MDIO support for GMAC4Alexandre TORGUE1-4/+98 On new GMAC4 IP, MAC_MDIO_address register has been updated, and bitmaps changed. This patch takes into account those changes. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-04-29vxlan: fix initialization with custom link parametersJiri Benc1-4/+4 Commit 0c867c9bf84c ("vxlan: move Ethernet initialization to a separate function") changed initialization order and as an unintended result, when the user specifies additional link parameters (such as IFLA_ADDRESS) while creating vxlan interface, those are overwritten by vxlan_ether_setup later. It's necessary to call ether_setup from withing the ->setup callback. That way, the correct parameters are set by rtnl_create_link later. This is done also for VXLAN-GPE, as we don't know the interface type yet at that point, and changed to the correct interface type later. Fixes: 0c867c9bf84c ("vxlan: move Ethernet initialization to a separate function") Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-04-29samples/bpf: like LLC also verify and allow redefining CLANG commandJesper Dangaard Brouer2-14/+17 Users are likely to manually compile both LLVM 'llc' and 'clang' tools. Thus, also allow redefining CLANG and verify command exist. Makefile implementation wise, the target that verify the command have been generalized. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-04-29samples/bpf: allow make to be run from samples/bpf/ directoryJesper Dangaard Brouer2-0/+11 It is not intuitive that 'make' must be run from the top level directory with argument "samples/bpf/" to compile these eBPF samples. Introduce a kbuild make file trick that allow make to be run from the "samples/bpf/" directory itself. It basically change to the top level directory and call "make samples/bpf/" with the "/" slash after the directory name. Also add a clean target that only cleans this directory, by taking advantage of the kbuild external module setting M=$PWD. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>