aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/syscall-counts.py
diff options
context:
space:
mode:
authorTodd Poynor <toddpoynor@google.com>2018-07-27 22:21:56 -0700
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2018-07-28 09:24:10 +0200
commite7cffa03b34265e17de55d5ef8983c91482643a0 (patch)
tree36067bd0cae67a5b78a8fc44cf33d8cea1be2ccc /tools/perf/scripts/python/syscall-counts.py
parentstaging: erofs: fix a compile warning of Z_EROFS_VLE_VMAP_ONSTACK_PAGES (diff)
downloadlinux-e7cffa03b34265e17de55d5ef8983c91482643a0.tar.gz
linux-e7cffa03b34265e17de55d5ef8983c91482643a0.zip
staging: gasket: sysfs: remove check for refcount already zero
Remove the check for refcount already zero, which shouldn't be necessary. Signed-off-by: Todd Poynor <toddpoynor@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'tools/perf/scripts/python/syscall-counts.py')
0 files changed, 0 insertions, 0 deletions
generated by cgit v1.2.3 (git 2.39.1) at 2025-12-23 22:42:36 +0000
d>-1/+2 When we run scripted Porcelains, "git" potty has set up the $PATH by prepending $GIT_EXEC_PATH, the path given by "git --exec-path=$there $cmd", etc. already. Because of this, scripted Porcelains can dot-source shell script library like git-sh-setup with simple dot without specifying any path. t2300 however dot-sources git-sh-setup without adjusting $PATH like the real "git" potty does. This has not been a problem so far, but once git-sh-setup wants to rely on the $PATH adjustment, just like any scripted Porcelains already do, it would become one. It cannot for example dot-source another shell library without specifying the full path to it by prefixing $(git --exec-path). Signed-off-by: Junio C Hamano <gitster@pobox.com> 2016-06-01t5500 & t7403: lose bash-ism "local"Junio C Hamano2-3/+2 In t5500::check_prot_host_port_path(), diagport is not a variable used elsewhere and the function is not recursively called so this can simply lose the "local", which may not be supported by shell (besides, the function liberally clobbers other variables without making them "local"). t7403::reset_submodule_urls() overrides the "root" variable used in the test framework for no good reason; its use is not about temporarily relocating where the test repositories are created. This assignment can be made not to clobber the variable by moving them into the subshells it already uses. Its value is always $TRASH_DIRECTORY, so we could use it instead there, and this function that is called only once and its two subshells may not be necessary (instead, the caller can use "git -C $there config" and set a value that is derived from $TRASH_DIRECTORY), but this is a minimum fix that is needed to lose "local". Helped-by: John Keeping <john@keeping.me.uk> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com> 2016-06-01submodule: remove bashism from shell scriptStefan Beller2-43/+20 Junio pointed out `relative_path` was using bashisms via the local variables. As the longer term goal is to rewrite most of the submodule code in C, do it now. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> 2016-06-01submodule--helper: offer a consistent APIStefan Beller2-7/+17 In 48308681 (2016-02-29, git submodule update: have a dedicated helper for cloning), the helper communicated errors back only via exit code, and dance with printing '#unmatched' in case of error was left to git-submodule.sh as it uses the output of the helper and pipes it into shell commands. This change makes the helper consistent by never printing '#unmatched' in the helper but always handling these piping issues in the actual shell script. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> 2016-06-01Makefile: add $(DEVELOPER_CFLAGS) variableMatthieu Moy1-9/+10 This does not change the behavior, but allows the user to tweak DEVELOPER_CFLAGS on the command-line or in a config.mak* file if needed. This also makes the code somewhat cleaner as it follows the pattern <initialisation of variables> <include statements> <actual build logic> by specifying which flags to activate in the first part, and actually activating them in the last one. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com> 2016-06-01test-lib: add in-shell "env" replacementJeff King2-1/+23 The one-shot environment variable syntax: FOO=BAR some-program is unportable when some-program is actually a shell function, like test_must_fail (on some shells FOO remains set after the function returns, and on others it does not). We sometimes get around this by using env, like: test_must_fail env FOO=BAR some-program But that only works because test_must_fail's arguments are themselves a command which can be run. You can't run: env FOO=BAR test_must_fail some-program because env does not know about our shell functions. So there is no equivalent for test_commit, for example, and one must resort to: ( FOO=BAR export FOO test_commit ) which is a bit verbose. Let's add a version of "env" that works _inside_ the shell, by creating a subshell, exporting variables from its argument list, and running the command. Its use is demonstrated on a currently-unportable case in t4014. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com> 2016-05-31Git 2.9-rc1v2.9.0-rc1Junio C Hamano2-40/+49 Signed-off-by: Junio C Hamano <gitster@pobox.com> 2016-05-31More topics for 2.8.4Junio C Hamano1-0/+28 Signed-off-by: Junio C Hamano <gitster@pobox.com> 2016-05-31rebase -i: remove an unnecessary 'rerere' invocationJohannes Sixt1-1/+0 Interactive rebase uses 'git cherry-pick' and 'git merge' to replay commits. Both invoke the 'rerere' machinery when they fail due to merge conflicts. Note that all code paths with these two commands also invoke the shell function die_with_patch when the commands fail. Since commit 629716d2 ("rerere: do use multiple variants") the second operation of the rerere machinery can be observed by a duplicated message "Recorded preimage for 'file'". This second operation records the same preimage as the first one and, hence, only wastes cycles. Remove the 'git rerere' invocation from die_with_patch. Shell function die_with_patch can be called after the failure of "git commit", too, which also calls into the rerere machinery, but it does so only after a successful commit to record the resolution. Therefore, it is wrong to call 'git rerere' from die_with_patch after "git commit" fails. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com> 2016-05-31perf: make the tests work without a worktreeRené Scharfe1-1/+4 In regular repositories $source_git and $objects_dir contain relative paths based on $source. Go there to allow cp to resolve them. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com> 2016-05-31Documentation: bold literals in manErwan Mathoniere1-1/+1 Backticks are emphasized through monospaced styling in the HTML version of Git documentation. But they were left unstyled in the manual pages. To make the man pages more comfortably read, `MAN_BOLD_LITERAL` was added by 5121a6d (Documentation: option to render literal text as bold for manpages, 2009-03-27). It allowed the user to build the manpages with literals in bold style. For precaution it was not set by default back then. Since 79c461d (docs: default to more modern toolset, 2010-11-19), it is assumed ASCIIDOC 8 and at least docbook-xsl 1.73 are used, so the need for compatibility concern is much lessor now. Remove `MAN_BOLD_LITERAL`, and typeset literals as bold by default . Add `NO_MAN_BOLD_LITERAL`, a new Makefile option, disabling this feature when defined. Signed-off-by: Erwan MATHONIERE <erwan.mathoniere@grenoble-inp.org> Signed-off-by: Samuel GROOT <samuel.groot@grenoble-inp.org> Signed-off-by: Tom RUSSELLO <tom.russello@grenoble-inp.org> Signed-off-by: Matthieu MOY <matthieu.moy@grenoble-inp.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com> 2016-05-31Makefile: move 'ifdef DEVELOPER' after config.mak* inclusionMatthieu Moy1-12/+12 The DEVELOPER knob was introduced in 658df95 (add DEVELOPER makefile knob to check for acknowledged warnings, 2016-02-25), and works well when used as "make DEVELOPER=1", and when the configure script was not used. However, the advice given in CodingGuidelines to add DEVELOPER=1 to config.mak does not: config.mak is included after testing for DEVELOPER in the Makefile, and at least GNU Make's manual specifies "Conditional directives are parsed immediately", hence the config.mak declaration is not visible at the time the conditional is evaluated. Also, when using the configure script to generate a config.mak.autogen, the later file contained a "CFLAGS = <flags>" initialization, which overrode the "CFLAGS += -W..." triggered by DEVELOPER. This patch fixes both issues. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com> 2016-05-31README.md: format CLI commands with code syntaxBenjamin Dopplinger1-5/+5 CLI commands which are mentioned in the readme are now formatted with the Markdown code syntax to make the documentation more readable. Signed-off-by: Benjamin Dopplinger <b.dopplinger@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com> 2016-05-29Final batch before 2.9-rc1Junio C Hamano1-0/+11 Signed-off-by: Junio C Hamano <gitster@pobox.com> 2016-05-29git-cherry-pick.txt: correct a small typoPablo Santiago Blum de Aguiar1-1/+1 Most of the document mentions `behavior` instead of the British variation, `behaviour`. This change makes it consistent. Signed-off-by: Pablo Santiago Blum de Aguiar <scorphus@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> 2016-05-29patch-id: use starts_with() and skip_prefix()René Scharfe1-13/+10 Get rid of magic numbers and avoid running over the end of a NUL terminated string by using starts_with() and skip_prefix() instead of memcmp(). Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com> 2016-05-29apply: remove unused parameters from name_terminate()René Scharfe1-2/+2 Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com> 2016-05-27Documentation: add instructions to help setup gmail 2FAMichael Rappazzo1-0/+13 For those who use two-factor authentication with gmail, git-send-email will not work unless it is setup with an app-specific password. The example for setting up git-send-email for use with gmail will now include information on generating and storing the app-specific password. Signed-off-by: Michael Rappazzo <rappazzo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> 2016-05-27log: document the --decorate=auto optionRamsay Jones2-4/+9 Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>