Merge tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth.

  We didn't get netfilter or wireless PRs this week, so next week's PR
  is probably going to be bigger. A healthy dose of fixes for bugs
  introduced in the current release nonetheless.

  Current release - regressions:

   - Bluetooth: always allow SCO packets for user channel

   - af_unix: fix memory leak in unix_dgram_sendmsg()

   - rxrpc:
       - remove redundant peer->mtu_lock causing lockdep splats
       - fix spinlock flavor issues with the peer record hash

   - eth: iavf: fix circular lock dependency with netdev_lock

   - net: use rtnl_net_dev_lock() in
     register_netdevice_notifier_dev_net() RDMA driver register notifier
     after the device

  Current release - new code bugs:

   - ethtool: fix ioctl confusing drivers about desired HDS user config

   - eth: ixgbe: fix media cage present detection for E610 device

  Previous releases - regressions:

   - loopback: avoid sending IP packets without an Ethernet header

   - mptcp: reset connection when MPTCP opts are dropped after join

  Previous releases - always broken:

   - net: better track kernel sockets lifetime

   - ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels

   - phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT

   - eth: enetc: number of error handling fixes

   - dsa: rtl8366rb: reshuffle the code to fix config / build issue with
     LED support"

* tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
  net: ti: icss-iep: Reject perout generation request
  idpf: fix checksums set in idpf_rx_rsc()
  selftests: drv-net: Check if combined-count exists
  net: ipv6: fix dst ref loop on input in rpl lwt
  net: ipv6: fix dst ref loop on input in seg6 lwt
  usbnet: gl620a: fix endpoint checking in genelink_bind()
  net/mlx5: IRQ, Fix null string in debug print
  net/mlx5: Restore missing trace event when enabling vport QoS
  net/mlx5: Fix vport QoS cleanup on error
  net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination.
  af_unix: Fix memory leak in unix_dgram_sendmsg()
  net: Handle napi_schedule() calls from non-interrupt
  net: Clear old fragment checksum value in napi_reuse_skb
  gve: unlink old napi when stopping a queue using queue API
  net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
  tcp: Defer ts_recent changes until req is owned
  net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs()
  net: enetc: remove the mm_lock from the ENETC v4 driver
  net: enetc: add missing enetc4_link_deinit()
  net: enetc: update UDP checksum when updating originTimestamp field
  ...

1 files changed, 142 insertions, 3 deletions

diff --git a/tools/testing/selftests/drivers/net/hds.py b/tools/testing/selftests/drivers/net/hds.py
index 394971b25c0b..873f5219e41d 100755
--- a/tools/testing/selftests/drivers/net/hds.py
+++ b/tools/testing/selftests/drivers/net/hds.py
@@ -2,17 +2,54 @@
 # SPDX-License-Identifier: GPL-2.0
 
 import errno
+import os
 from lib.py import ksft_run, ksft_exit, ksft_eq, ksft_raises, KsftSkipEx
-from lib.py import EthtoolFamily, NlError
+from lib.py import CmdExitFailure, EthtoolFamily, NlError
 from lib.py import NetDrvEnv
+from lib.py import defer, ethtool, ip
 
-def get_hds(cfg, netnl) -> None:
+
+def _get_hds_mode(cfg, netnl) -> str:
     try:
         rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}})
     except NlError as e:
         raise KsftSkipEx('ring-get not supported by device')
     if 'tcp-data-split' not in rings:
         raise KsftSkipEx('tcp-data-split not supported by device')
+    return rings['tcp-data-split']
+
+
+def _xdp_onoff(cfg):
+    test_dir = os.path.dirname(os.path.realpath(__file__))
+    prog = test_dir + "/../../net/lib/xdp_dummy.bpf.o"
+    ip("link set dev %s xdp obj %s sec xdp" %
+       (cfg.ifname, prog))
+    ip("link set dev %s xdp off" % cfg.ifname)
+
+
+def _ioctl_ringparam_modify(cfg, netnl) -> None:
+    """
+    Helper for performing a hopefully unimportant IOCTL SET.
+    IOCTL does not support HDS, so it should not affect the HDS config.
+    """
+    try:
+        rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}})
+    except NlError as e:
+        raise KsftSkipEx('ring-get not supported by device')
+
+    if 'tx' not in rings:
+        raise KsftSkipEx('setting Tx ring size not supported')
+
+    try:
+        ethtool(f"--disable-netlink -G {cfg.ifname} tx {rings['tx'] // 2}")
+    except CmdExitFailure as e:
+        ethtool(f"--disable-netlink -G {cfg.ifname} tx {rings['tx'] * 2}")
+    defer(ethtool, f"-G {cfg.ifname} tx {rings['tx']}")
+
+
+def get_hds(cfg, netnl) -> None:
+    _get_hds_mode(cfg, netnl)
+
 
 def get_hds_thresh(cfg, netnl) -> None:
     try:
@@ -104,6 +141,103 @@ def set_hds_thresh_gt(cfg, netnl) -> None:
         netnl.rings_set({'header': {'dev-index': cfg.ifindex}, 'hds-thresh': hds_gt})
     ksft_eq(e.exception.nl_msg.error, -errno.EINVAL)
 
+
+def set_xdp(cfg, netnl) -> None:
+    """
+    Enable single-buffer XDP on the device.
+    When HDS is in "auto" / UNKNOWN mode, XDP installation should work.
+    """
+    mode = _get_hds_mode(cfg, netnl)
+    if mode == 'enabled':
+        netnl.rings_set({'header': {'dev-index': cfg.ifindex},
+                         'tcp-data-split': 'unknown'})
+
+    _xdp_onoff(cfg)
+
+
+def enabled_set_xdp(cfg, netnl) -> None:
+    """
+    Enable single-buffer XDP on the device.
+    When HDS is in "enabled" mode, XDP installation should not work.
+    """
+    _get_hds_mode(cfg, netnl)
+    netnl.rings_set({'header': {'dev-index': cfg.ifindex},
+                     'tcp-data-split': 'enabled'})
+
+    defer(netnl.rings_set, {'header': {'dev-index': cfg.ifindex},
+                            'tcp-data-split': 'unknown'})
+
+    with ksft_raises(CmdExitFailure) as e:
+        _xdp_onoff(cfg)
+
+
+def set_xdp(cfg, netnl) -> None:
+    """
+    Enable single-buffer XDP on the device.
+    When HDS is in "auto" / UNKNOWN mode, XDP installation should work.
+    """
+    mode = _get_hds_mode(cfg, netnl)
+    if mode == 'enabled':
+        netnl.rings_set({'header': {'dev-index': cfg.ifindex},
+                         'tcp-data-split': 'unknown'})
+
+    _xdp_onoff(cfg)
+
+
+def enabled_set_xdp(cfg, netnl) -> None:
+    """
+    Enable single-buffer XDP on the device.
+    When HDS is in "enabled" mode, XDP installation should not work.
+    """
+    _get_hds_mode(cfg, netnl)  # Trigger skip if not supported
+
+    netnl.rings_set({'header': {'dev-index': cfg.ifindex},
+                     'tcp-data-split': 'enabled'})
+    defer(netnl.rings_set, {'header': {'dev-index': cfg.ifindex},
+                            'tcp-data-split': 'unknown'})
+
+    with ksft_raises(CmdExitFailure) as e:
+        _xdp_onoff(cfg)
+
+
+def ioctl(cfg, netnl) -> None:
+    mode1 = _get_hds_mode(cfg, netnl)
+    _ioctl_ringparam_modify(cfg, netnl)
+    mode2 = _get_hds_mode(cfg, netnl)
+
+    ksft_eq(mode1, mode2)
+
+
+def ioctl_set_xdp(cfg, netnl) -> None:
+    """
+    Like set_xdp(), but we perturb the settings via the legacy ioctl.
+    """
+    mode = _get_hds_mode(cfg, netnl)
+    if mode == 'enabled':
+        netnl.rings_set({'header': {'dev-index': cfg.ifindex},
+                         'tcp-data-split': 'unknown'})
+
+    _ioctl_ringparam_modify(cfg, netnl)
+
+    _xdp_onoff(cfg)
+
+
+def ioctl_enabled_set_xdp(cfg, netnl) -> None:
+    """
+    Enable single-buffer XDP on the device.
+    When HDS is in "enabled" mode, XDP installation should not work.
+    """
+    _get_hds_mode(cfg, netnl)  # Trigger skip if not supported
+
+    netnl.rings_set({'header': {'dev-index': cfg.ifindex},
+                     'tcp-data-split': 'enabled'})
+    defer(netnl.rings_set, {'header': {'dev-index': cfg.ifindex},
+                            'tcp-data-split': 'unknown'})
+
+    with ksft_raises(CmdExitFailure) as e:
+        _xdp_onoff(cfg)
+
+
 def main() -> None:
     with NetDrvEnv(__file__, queue_count=3) as cfg:
         ksft_run([get_hds,
@@ -112,7 +246,12 @@ def main() -> None:
                   set_hds_enable,
                   set_hds_thresh_zero,
                   set_hds_thresh_max,
-                  set_hds_thresh_gt],
+                  set_hds_thresh_gt,
+                  set_xdp,
+                  enabled_set_xdp,
+                  ioctl,
+                  ioctl_set_xdp,
+                  ioctl_enabled_set_xdp],
                  args=(cfg, EthtoolFamily()))
     ksft_exit()