Merge tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Continue Netlink conversions to per-namespace RTNL lock
     (IPv4 routing, routing rules, routing next hops, ARP ioctls)

   - Continue extending the use of netdev instance locks. As a driver
     opt-in protect queue operations and (in due course) ethtool
     operations with the instance lock and not RTNL lock.

   - Support collecting TCP timestamps (data submitted, sent, acked) in
     BPF, allowing for transparent (to the application) and lower
     overhead tracking of TCP RPC performance.

   - Tweak existing networking Rx zero-copy infra to support zero-copy
     Rx via io_uring.

   - Optimize MPTCP performance in single subflow mode by 29%.

   - Enable GRO on packets which went thru XDP CPU redirect (were queued
     for processing on a different CPU). Improving TCP stream
     performance up to 2x.

   - Improve performance of contended connect() by 200% by searching for
     an available 4-tuple under RCU rather than a spin lock. Bring an
     additional 229% improvement by tweaking hash distribution.

   - Avoid unconditionally touching sk_tsflags on RX, improving
     performance under UDP flood by as much as 10%.

   - Avoid skb_clone() dance in ping_rcv() to improve performance under
     ping flood.

   - Avoid FIB lookup in netfilter if socket is available, 20% perf win.

   - Rework network device creation (in-kernel) API to more clearly
     identify network namespaces and their roles. There are up to 4
     namespace roles but we used to have just 2 netns pointer arguments,
     interpreted differently based on context.

   - Use sysfs_break_active_protection() instead of trylock to avoid
     deadlocks between unregistering objects and sysfs access.

   - Add a new sysctl and sockopt for capping max retransmit timeout in
     TCP.

   - Support masking port and DSCP in routing rule matches.

   - Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.

   - Support specifying at what time packet should be sent on AF_XDP
     sockets.

   - Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
     users.

   - Add Netlink YAML spec for WiFi (nl80211) and conntrack.

   - Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
     which only need to be exported when IPv6 support is built as a
     module.

   - Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
     normal bridging.

   - Allow users to specify source port range for GENEVE tunnels.

   - netconsole: allow attaching kernel release, CPU ID and task name to
     messages as metadata

  Driver API:

   - Continue rework / fixing of Energy Efficient Ethernet (EEE) across
     the SW layers. Delegate the responsibilities to phylink where
     possible. Improve its handling in phylib.

   - Support symmetric OR-XOR RSS hashing algorithm.

   - Support tracking and preserving IRQ affinity by NAPI itself.

   - Support loopback mode speed selection for interface selftests.

  Device drivers:

   - Remove the IBM LCS driver for s390

   - Remove the sb1000 cable modem driver

   - Add support for SFP module access over SMBus

   - Add MCTP transport driver for MCTP-over-USB

   - Enable XDP metadata support in multiple drivers

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - add PCIe TLP Processing Hints (TPH) support for new AMD
           platforms
         - support dumping RoCE queue state for debug
         - opt into instance locking
      - Intel (100G, ice, idpf):
         - ice: rework MSI-X IRQ management and distribution
         - ice: support for E830 devices
         - iavf: add support for Rx timestamping
         - iavf: opt into instance locking
      - nVidia/Mellanox:
         - mlx4: use page pool memory allocator for Rx
         - mlx5: support for one PTP device per hardware clock
         - mlx5: support for 200Gbps per-lane link modes
         - mlx5: move IPSec policy check after decryption
      - AMD/Solarflare:
         - support FW flashing via devlink
      - Cisco (enic):
         - use page pool memory allocator for Rx
         - enable 32, 64 byte CQEs
         - get max rx/tx ring size from the device
      - Meta (fbnic):
         - support flow steering and RSS configuration
         - report queue stats
         - support TCP segmentation
         - support IRQ coalescing
         - support ring size configuration
      - Marvell/Cavium:
         - support AF_XDP
      - Wangxun:
         - support for PTP clock and timestamping
      - Huawei (hibmcge):
         - checksum offload
         - add more statistics

   - Ethernet virtual:
      - VirtIO net:
         - aggressively suppress Tx completions, improve perf by 96%
           with 1 CPU and 55% with 2 CPUs
         - expose NAPI to IRQ mapping and persist NAPI settings
      - Google (gve):
         - support XDP in DQO RDA Queue Format
         - opt into instance locking
      - Microsoft vNIC:
         - support BIG TCP

   - Ethernet NICs consumer, and embedded:
      - Synopsys (stmmac):
         - cleanup Tx and Tx clock setting and other link-focused
           cleanups
         - enable SGMII and 2500BASEX mode switching for Intel platforms
         - support Sophgo SG2044
      - Broadcom switches (b53):
         - support for BCM53101
      - TI:
         - iep: add perout configuration support
         - icssg: support XDP
      - Cadence (macb):
         - implement BQL
      - Xilinx (axinet):
         - support dynamic IRQ moderation and changing coalescing at
           runtime
         - implement BQL
         - report standard stats
      - MediaTek:
         - support phylink managed EEE
      - Intel:
         - igc: don't restart the interface on every XDP program change
      - RealTek (r8169):
         - support reading registers of internal PHYs directly
         - increase max jumbo packet size on RTL8125/RTL8126
      - Airoha:
         - support for RISC-V NPU packet processing unit
         - enable scatter-gather and support MTU up to 9kB
      - Tehuti (tn40xx):
         - support cards with TN4010 MAC and an Aquantia AQR105 PHY

   - Ethernet PHYs:
      - support for TJA1102S, TJA1121
      - dp83tg720: add randomized polling intervals for link detection
      - dp83822: support changing the transmit amplitude voltage
      - support for LEDs on 88q2xxx

   - CAN:
      - canxl: support Remote Request Substitution bit access
      - flexcan: add S32G2/S32G3 SoC

   - WiFi:
      - remove cooked monitor support
      - strict mode for better AP testing
      - basic EPCS support
      - OMI RX bandwidth reduction support
      - batman-adv: add support for jumbo frames

   - WiFi drivers:
      - RealTek (rtw88):
         - support RTL8814AE and RTL8814AU
      - RealTek (rtw89):
         - switch using wiphy_lock and wiphy_work
         - add BB context to manipulate two PHY as preparation of MLO
         - improve BT-coexistence mechanism to play A2DP smoothly
      - Intel (iwlwifi):
         - add new iwlmld sub-driver for latest HW/FW combinations
      - MediaTek (mt76):
         - preparation for mt7996 Multi-Link Operation (MLO) support
      - Qualcomm/Atheros (ath12k):
         - continued work on MLO
      - Silabs (wfx):
         - Wake-on-WLAN support

   - Bluetooth:
      - add support for skb TX SND/COMPLETION timestamping
      - hci_core: enable buffer flow control for SCO/eSCO
      - coredump: log devcd dumps into the monitor

   - Bluetooth drivers:
      - intel: add support to configure TX power
      - nxp: handle bootloader error during cmd5 and cmd7"

* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
  unix: fix up for "apparmor: add fine grained af_unix mediation"
  mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
  net: usb: asix: ax88772: Increase phy_name size
  net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
  net: libwx: fix Tx L4 checksum
  net: libwx: fix Tx descriptor content for some tunnel packets
  atm: Fix NULL pointer dereference
  net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
  net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
  net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
  net: phy: aquantia: add essential functions to aqr105 driver
  net: phy: aquantia: search for firmware-name in fwnode
  net: phy: aquantia: add probe function to aqr105 for firmware loading
  net: phy: Add swnode support to mdiobus_scan
  gve: add XDP DROP and PASS support for DQ
  gve: update XDP allocation path support RX buffer posting
  gve: merge packet buffer size fields
  gve: update GQ RX to use buf_size
  gve: introduce config-based allocation for XDP
  gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
  ...

1 files changed, 41 insertions, 7 deletions

diff --git a/tools/testing/selftests/drivers/net/hw/rss_ctx.py b/tools/testing/selftests/drivers/net/hw/rss_ctx.py
index 319aaa004c40..ca60ae325c22 100755
--- a/tools/testing/selftests/drivers/net/hw/rss_ctx.py
+++ b/tools/testing/selftests/drivers/net/hw/rss_ctx.py
@@ -4,7 +4,8 @@
 import datetime
 import random
 import re
-from lib.py import ksft_run, ksft_pr, ksft_exit, ksft_eq, ksft_ne, ksft_ge, ksft_lt, ksft_true
+from lib.py import ksft_run, ksft_pr, ksft_exit
+from lib.py import ksft_eq, ksft_ne, ksft_ge, ksft_in, ksft_lt, ksft_true, ksft_raises
 from lib.py import NetDrvEpEnv
 from lib.py import EthtoolFamily, NetdevFamily
 from lib.py import KsftSkipEx, KsftFailEx
@@ -58,6 +59,14 @@ def require_ntuple(cfg):
         raise KsftSkipEx("Ntuple filters not enabled on the device: " + str(features["ntuple-filters"]))
 
 
+def require_context_cnt(cfg, need_cnt):
+    # There's no good API to get the context count, so the tests
+    # which try to add a lot opportunisitically set the count they
+    # discovered. Careful with test ordering!
+    if need_cnt and cfg.context_cnt and cfg.context_cnt < need_cnt:
+        raise KsftSkipEx(f"Test requires at least {need_cnt} contexts, but device only has {cfg.context_cnt}")
+
+
 # Get Rx packet counts for all queues, as a simple list of integers
 # if @prev is specified the prev counts will be subtracted
 def _get_rx_cnts(cfg, prev=None):
@@ -383,7 +392,7 @@ def test_rss_context_dump(cfg):
 
     # Sanity-check the results
     for data in ctxs:
-        ksft_ne(set(data['indir']), {0}, "indir table is all zero")
+        ksft_ne(set(data.get('indir', [1])), {0}, "indir table is all zero")
         ksft_ne(set(data.get('hkey', [1])), {0}, "key is all zero")
 
         # More specific checks
@@ -456,6 +465,8 @@ def test_rss_context(cfg, ctx_cnt=1, create_with_cfg=None):
                 raise
             ksft_pr(f"Failed to create context {i + 1}, trying to test what we got")
             ctx_cnt = i
+            if cfg.context_cnt is None:
+                cfg.context_cnt = ctx_cnt
             break
 
         _rss_key_check(cfg, context=ctx_id)
@@ -511,8 +522,7 @@ def test_rss_context_out_of_order(cfg, ctx_cnt=4):
     """
 
     require_ntuple(cfg)
-
-    requested_ctx_cnt = ctx_cnt
+    require_context_cnt(cfg, 4)
 
     # Try to allocate more queues when necessary
     qcnt = len(_get_rx_cnts(cfg))
@@ -577,9 +587,6 @@ def test_rss_context_out_of_order(cfg, ctx_cnt=4):
     remove_ctx(-1)
     check_traffic()
 
-    if requested_ctx_cnt != ctx_cnt:
-        raise KsftSkipEx(f"Tested only {ctx_cnt} contexts, wanted {requested_ctx_cnt}")
-
 
 def test_rss_context_overlap(cfg, other_ctx=0):
     """
@@ -588,6 +595,8 @@ def test_rss_context_overlap(cfg, other_ctx=0):
     """
 
     require_ntuple(cfg)
+    if other_ctx:
+        require_context_cnt(cfg, 2)
 
     queue_cnt = len(_get_rx_cnts(cfg))
     if queue_cnt < 4:
@@ -649,6 +658,29 @@ def test_rss_context_overlap2(cfg):
     test_rss_context_overlap(cfg, True)
 
 
+def test_flow_add_context_missing(cfg):
+    """
+    Test that we are not allowed to add a rule pointing to an RSS context
+    which was never created.
+    """
+
+    require_ntuple(cfg)
+
+    # Find a context which doesn't exist
+    for ctx_id in range(1, 100):
+        try:
+            get_rss(cfg, context=ctx_id)
+        except CmdExitFailure:
+            break
+
+    with ksft_raises(CmdExitFailure) as cm:
+        flow = f"flow-type tcp{cfg.addr_ipver} dst-ip {cfg.addr} dst-port 1234 context {ctx_id}"
+        ntuple_id = ethtool_create(cfg, "-N", flow)
+        ethtool(f"-N {cfg.ifname} delete {ntuple_id}")
+    if cm.exception:
+        ksft_in('Invalid argument', cm.exception.cmd.stderr)
+
+
 def test_delete_rss_context_busy(cfg):
     """
     Test that deletion returns -EBUSY when an rss context is being used
@@ -717,6 +749,7 @@ def test_rss_ntuple_addition(cfg):
 
 def main() -> None:
     with NetDrvEpEnv(__file__, nsim_test=False) as cfg:
+        cfg.context_cnt = None
         cfg.ethnl = EthtoolFamily()
         cfg.netdevnl = NetdevFamily()
 
@@ -726,6 +759,7 @@ def main() -> None:
                   test_rss_context_dump, test_rss_context_queue_reconfigure,
                   test_rss_context_overlap, test_rss_context_overlap2,
                   test_rss_context_out_of_order, test_rss_context4_create_with_cfg,
+                  test_flow_add_context_missing,
                   test_delete_rss_context_busy, test_rss_ntuple_addition],
                  args=(cfg, ))
     ksft_exit()